| Commit message (Collapse) | Author | Files | Lines |
|---|
|
packet_write_fmt() would die in case of a write error even though for
some callers an error would be acceptable. Add packet_write_fmt_gently()
which writes a formatted pkt-line like packet_write_fmt() but does not
die in case of an error. The function is used in a subsequent patch.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extracted set_packet_header() function converts an integer to a 4 byte
hex string. Make this function locally available so that other pkt-line
functions could use it.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
packet_write() should be called packet_write_fmt() because it is a
printf-like function that takes a format string as first parameter.
packet_write_fmt() should be used for text strings only. Arbitrary
binary data should use a new packet_write() function that is introduced
in a subsequent patch.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some processes might want to perform cleanup tasks before Git kills them
due to the 'clean_on_exit' flag. Let's give them an interface for doing
this. The feature is used in a subsequent patch.
Please note, that the cleanup callback is not executed if Git dies of a
signal. The reason is that only "async-signal-safe" functions would be
allowed to be call in that case. Since we cannot control what functions
the callback will use, we will not support the case. See 507d7804 for
more details.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move check_pipe() to run_command and make it public. This is necessary
to call the function from pkt-line in a subsequent patch.
While at it, make async_exit() static to run_command.c as it is no
longer used from outside.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use `test_config` to set the config, check that files are empty with
`test_must_be_empty`, compare files with `test_cmp`, and remove spaces
after ">" and "<".
Please note that the "rot13" filter configured in "setup" keeps using
`git config` instead of `test_config` because subsequent tests might
depend on it.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git filter driver commands with spaces (e.g. `filter.sh foo`) are hard
to read in error messages. Quote them to improve the readability.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ray Chen <oldsharp@gmail.com>
|
|
Reviewed-by: Ray <tvvocold@163.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The surrounding advice is printed to stderr, but the list of submodules
is not. Make the report consistent by reporting everything to stderr.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Turning on this variable can be useful when debugging http
tests. It can break a few tests in t5541 if not set
to an absolute path but it is not a variable
that the user is likely to have enabled accidentally.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the new GIT_TRACE_CURL environment variable instead
of the deprecated GIT_CURL_VERBOSE.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The process spawned in the hook uses the test's trash directory as CWD.
As long as it is alive, the directory cannot be removed on Windows.
Although the test succeeds, the 'test_done' that follows produces an
error message and leaves the trash directory around. Kill the process
before the test case advances.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We might wonder why our && chain check does not catch this case:
The && chain check uses a strange exit code with the expectation that
the second or later part of a broken && chain would not exit with this
particular code.
This expectation does not work in this case because __git_ps1, being
the first command in the second part of the broken && chain, records
the current exit code, does its work, and finally returns to the caller
with the recorded exit code. This fools our && chain check.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and use a helper function that decodes the char value of two
hexadecimal digits. It returns a negative number on error, avoids
running over the end of the given string and doesn't shift negative
values.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move our implementation of strdup(3) out of compat/nedmalloc/ and
allow it to be used independently from USE_NED_ALLOCATOR. The
original nedmalloc doesn't come with strdup() and doesn't need it.
Only _users_ of nedmalloc need it, which was added when we imported
it to our compat/ hierarchy.
This reduces the difference of our copy of nedmalloc from the
original, making it easier to update, and allows for easier testing
and reusing of our version of strdup().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change Portuguese l10n leadership to Vasco Almeida.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
|
|
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you delete the symbolic-ref HEAD from a repository, Git no longer
considers the repository valid, and even "git symbolic-ref HEAD
refs/heads/master" would not be able to recover from that state
(although "git init" can, but that is a sure sign that you are
talking about a "broken" repository).
In the spirit similar to afe5d3d5 ("symbolic ref: refuse non-ref
targets in HEAD", 2009-01-29), forbid removal of HEAD to avoid
corrupting a repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function is used to set up the environment variable used in a
subprocess we spawn in a submodule directory. The callers set up a
child_process structure, find the working tree path of one submodule
and set .dir field to it, and then use start_command() API to spawn
the subprocess like "status", "fetch", etc.
When this happens, we expect that the ".git" (either a directory or
a gitfile that points at the real location) in the current working
directory of the subprocess MUST be the repository for the submodule.
If this ".git" thing is a corrupt repository, however, because
prepare_submodule_repo_env() unsets GIT_DIR and GIT_WORK_TREE, the
subprocess will see ".git", thinks it is not a repository, and
attempt to find one by going up, likely to end up in finding the
repository of the superproject. In some codepaths, this will cause
a command run with the "--recurse-submodules" option to recurse
forever.
By exporting GIT_DIR=.git, disable the auto-discovery logic in the
subprocess, which would instead stop it and report an error.
The test illustrates existing problems in a few callsites of this
function. Without this fix, "git fetch --recurse-submodules", "git
status" and "git diff" keep recursing forever.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.
Add tests for the new format and option.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future patch is going to add a new submodule diff format which
displays an inline diff of the submodule changes. To make this easier,
and to ensure that both submodule diff formats use the same initial
header, factor out show_submodule_header() function which will print the
current submodule header line, and then leave the show_submodule_summary
function to lookup and print the submodule log format.
This does create one format change in that "(revision walker failed)"
will now be displayed on its own line rather than as part of the message
because we no longer perform this step directly in the header display
flow. However, this is a rare case as most causes of the failure will be
due to a missing commit which we already check for and avoid previously.
flow. However, this is a rare case and shouldn't impact much.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we're going to be changing this function in a future patch, lets
go ahead and convert this to use object_id now.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on <path>/.git. If this fails it just assumes the
<path>/.git is actually a git directory.
This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.
Unfortunately this fails if the <path> is not actually checked out any
longer, such as by removing the directory.
Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.
If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated. A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:
- git_pathdup_submodule() returns NULL when we fail to find a path.
- strbuf_git_path_submodule() propagates the error code to the caller.
Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.
Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"
Add tests to ensure this change works as expected.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future patch will add a new format for displaying the difference of
a submodule. Make it easier by changing how we store the current
selected format. Replace the DIFF_OPT flag with an enumeration, as each
format will be mutually exclusive.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"diff/log --stat" has a logic that determines the display columns
available for the diffstat part of the output and apportions it for
pathnames and diffstat graph automatically.
5e71a84a (Add output_prefix_length to diff_options, 2012-04-16)
added the output_prefix_length field to diff_options structure to
allow this logic to subtract the display columns used for the
history graph part from the total "terminal width"; this matters
when the "git log --graph -p" option is in use.
The field must be set to the number of display columns needed to
show the output from the output_prefix() callback, which is error
prone. As there is only one user of the field, and the user has the
actual value of the prefix string, let's get rid of the field and
have the user count the display width itself.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to is_null_oid(), and is_empty_blob_sha1() add an
empty_tree_oid along with helper function is_empty_tree_oid(). For
completeness, also add an "is_empty_tree_sha1()",
"is_empty_blob_sha1()", "is_empty_tree_oid()" and "is_empty_blob_oid()"
helpers.
To ensure we only get one singleton, implement EMPTY_BLOB_SHA1_BIN as
simply getting the hash of empty_blob_oid structure.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compiling color.c with gcc 6.2.0 using -O3 produces some
-Wmaybe-uninitialized false positives:
color.c: In function ‘color_parse_mem’:
color.c:189:10: warning: ‘bg.blue’ may be used uninitialized in this function [-Wmaybe-uninitialized]
out += xsnprintf(out, len, "%c8;2;%d;%d;%d", type,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
c->red, c->green, c->blue);
~~~~~~~~~~~~~~~~~~~~~~~~~~
color.c:208:15: note: ‘bg.blue’ was declared here
struct color bg = { COLOR_UNSPECIFIED };
^~
[ditto for bg.green, bg.red, fg.blue, etc]
This is doubly confusing, because the declaration shows it
being initialized! Even though we do not explicitly
initialize the color components, an incomplete initializer
sets the unmentioned members to zero.
What the warning doesn't show is that we later do this:
struct color c;
if (!parse_color(&c, ...)) {
if (fg.type == COLOR_UNSPECIFIED)
fg = c;
...
}
gcc is clever enough to realize that a struct assignment
from an uninitialized variable taints the destination. But
unfortunately it's _not_ clever enough to realize that we
only look at those members when type is set to COLOR_RGB, in
which case they are always initialized.
With -O2, gcc does not look into parse_color() and must
assume that "c" emerges fully initialized. With -O3, it
inlines parse_color(), and learns just enough to get
confused.
We can silence the false positive by initializing the
temporary "c". This also future-proofs us against
violating the type assumptions (the result would probably
still be buggy, but in a deterministic way).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit e208f9c (make error()'s constant return value more
visible, 2012-12-15) introduced some macro trickery to make
the constant return from error() more visible to callers,
which in turn can help gcc produce better warnings (and
possibly even better code).
Later, fd1d672 (usage.c: add warning_errno() and
error_errno(), 2016-05-08) introduced another variant, and
subsequent commits converted some uses of error() to
error_errno(), losing the magic from e208f9c for those
sites.
As a result, compiling vcs-svn/svndiff.c with "gcc -O3"
produces -Wmaybe-uninitialized false positives (at least
with gcc 6.2.0). Let's give error_errno() the same
treatment, which silences these warnings.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The algorithm in diff-highlight only understands how to look
at two sides of a diff; it cannot correctly handle combined
diffs with multiple preimages. Often highlighting does not
trigger at all for these diffs because the line counts do
not match up. E.g., if we see:
- ours
-theirs
++resolved
we would not bother highlighting; it naively looks like a
single line went away, and then a separate hunk added
another single line.
But of course there are exceptions. E.g., if the other side
deleted the line, we might see:
- ours
++resolved
which looks like we dropped " ours" and added "+resolved".
This is only a small highlighting glitch (we highlight the
space and the "+" along with the content), but it's also the
tip of the iceberg. Even if we learned to find the true
content here (by noticing we are in a 3-way combined diff
and marking _two_ characters from the front of the line as
uninteresting), there are other more complicated cases where
we really do need to handle a 3-way hunk.
Let's just punt for now; we can recognize combined diffs by
the presence of extra "@" symbols in the hunk header, and
treat them as non-diff content.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have a test suite for diff highlight, we can
show off the improvements from 8d00662 (diff-highlight: do
not split multibyte characters, 2015-04-03).
While we're at it, we can also add another case that
_doesn't_ work: combining code points are treated as their
own unit, which means that we may stick colors between them
and the character they are modifying (with the result that
the color is not shown in an xterm, though it's possible
that other terminals err the other way, and show the color
but not the accent). There's no fix here, but let's
document it as a failure.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
