| Commit message (Collapse) | Author | Files | Lines |
|---|
|
This trick was performed via
$ sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \
-e 's/Master/Main/g' -- t/t5411/test-00[3-5]*
We do not convert the files in `t/t5411/` in one go because the patch
would be too big (mails larger than 100kB are rejected by the Git
mailing list). Instead, we start with roughly half of the support files.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a straight-forward search-and-replace in the test script;
However, this is not yet complete because it requires many more
replacements in `t/t5411/`, too many for a single patch (the Git mailing
list rejects mails larger than 100kB). For that reason, we disable this
test script temporarily via the `PREPARE_FOR_MAIN_BRANCH` prereq.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the trivial search-and-replace, there are three
non-trivial adjustments necessary.
Mark the respective test cases with the transitional prereq and make
those non-trivial adjustments early, to make this change easier to
review.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some tests, the default branch name is part of aligned output. As we
want to change the default branch name to `main`, which is two
characters shorter than the old default branch name, we will have to
adjust those tests.
Since we use the original default branch name until the entire test
suite has been adjusted accordingly, the touched test cases need to be
guarded by a prereq (that is so far disabled so that they are skipped
for now).
The test cases that depend on those test cases that are newly guarded by
that prereq naturally have to be guarded, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to adjust a test that uses a prefix of the default branch name,
to accommodate for `main` being used soon.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the test case adjusted by this patch, we want to cut just after the
longest shown ref name. Since `main` is shorter than `master`, we need
to decrease the number of characters. Since `topic` is shown, too, and
since that is only one character shorter than `master`, we decrement the
length by one instead of two.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to rename the default branch name used by `git init` in the near
future, using `main` as the new name.
In preparation for that, we adjust a test case that wants to rename the
default branch to a different name that however has the same length. We
use `none` as that name because it matches the length of `main`.
As this test case cannot possibly pass until the default branch name is
_actually_ changed, we temporarily guard it behind a special-purpose
prereq, until the test suite is fully converted to use that new default
branch name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation to running t6200 with the default branch name set to
"main", let's adjust the only non-trivial aspect thereof. The rest will
be done via a trivial `sed` invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To allow for an incremental conversion to a new default main branch
name, let's introduce `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME`. This
environment variable can be set at the top of each converted test
script, overriding the default main branch name to use when initializing
new repositories (or cloning empty repositories).
Note: the `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME` is _not_ intended to be
used manually; many tests require a specific main branch name and cannot
simply work with another one. This `GIT_TEST_*` variable is meant purely
for the transitional period while the entire test suite is converted to
use `main` as the initial branch name by default.
We also introduce the `PREPARE_FOR_MAIN_BRANCH` prereq that determines
whether the default main branch name is `main`, and adjust a couple of
test functions to use it. This prereq will be used to temporarily
disable a couple test cases to allow for adjusting the test script
incrementally. Once an entire test is adjusted, we will adjust the test
so that it is run with `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME=main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Seeing as we want to use `main` as the new default branch name used by
`git init`, and that `main` is used as directory name in t9801, let's
tighten the rev-list arguments to make it explicit when we are referring
to a ref instead of a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for changing the default branch name to `main`, let's
skip the suffix "into main" in merge commit messages, the same way that
"into master" has been skipped by default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 124 new messages (5013t0f0u) for git 2.29.0.
Reviewed-by: 依云 <lilydjwg@gmail.com>
Reviewed-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
On Mac, tooltips are not automatically removed when a window loses
focus. Furthermore, mouse-move events are only dispatched to the active
window, which means that if we Command-tab to another application while
a tool tip is showing, the tool tip will stay there forever (in front of
other applications). So we must hide it manually when we lose focus.
Do this unconditionally here (i.e. without if {[is_MacOSX]}); it
shouldn't hurt on other platforms, even though they don't seem to have
this problem.
Signed-off-by: Stefan Haller <stefan@haller-berlin.de>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Pull from the language Coordenator repository and
`make` done at the top-level directory.
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
I am excited. Because I like a lot languages, and because I believe this
is the way to contribute to a large number of Portuguese speaking
person.
Jiang Xin and last Portuguese team gave me the lead. Thank you very
much. Honored to be a part of such a project.
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Update the Italian translation for Git 2.29.0, round 2.
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: pan93412 <pan93412@gmail.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Generate po/git.pot from v2.29.0-rc1 for git v2.29.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In command line options, variables are entered between < and >
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That's clearer asciidoc formatting.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `master` is tagged, and then both `master` and the tag are pushed,
Travis CI will happily build both. That is a waste of energy, which is
why we skip the build for `master` in that case.
Our GitHub workflow is also triggered by tags. However, the run would
fail because the `windows-test` jobs are _not_ skipped on tags, but the
`windows-build` job _is skipped (and therefore fails to upload the
build artifacts needed by the test jobs).
In addition, we just added logic to our GitHub workflow that will skip
runs altogether if there is already a successful run for the same commit
or at least for the same tree.
Let's just change the GitHub workflow to no longer specifically skip
tagged revisions.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing a commit that has already passed a CI or PR build
successfully, it makes sense to save some energy and time and skip the
new build.
Let's teach our GitHub workflow to do that.
For good measure, we also compare the tree ID, which is what we actually
test (the commit ID might have changed due to a reworded commit message,
which should not affect the outcome of the run).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the near future, we want to change Git's default branch name to
`main`. In preparation for that, stop using it as a branch name in the
test suite. Replace that branch name by `topic`, the same name we used
to rename variations of `master` in b6211b89eb3 (tests: avoid variations
of the `master` branch name, 2020-09-26).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for a patch series that will change the fall-back for
`init.defaultBranch` to `main`, let's not use `main` as ref name in this
test script.
Otherwise, the `git for-each-ref ... | grep main` which wants to catch
those refs would also unexpectedly catch `refs/heads/main`.
Since the refs in question are worktree-local ones (i.e. each worktree
has their own, just like `HEAD`), and since the test case already uses a
secondary worktree called "second", let's use the name "first" for those
refs instead.
While at it, adjust the test titles that talk about a "repo" when they
meant a "worktree" instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 805d9eaf5e (Makefile: ASCII-sort += lists, 2020-03-21), the += lists
in the Makefile were sorted into ASCII order. Since then, more out of
order elements have been introduced. Sort these lists back into ASCII
order.
This patch is best viewed with `--color-moved`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When building with SKIP_DASHED_BUILT_INS=YesPlease, the built-in
commands are no longer present in the `PATH` as hardlinks to `git`.
As a consequence, `load_command_list()` needs to be taught to find the
names of the built-in commands from elsewhere.
This only affected the output of `git --list-cmds=main`, but not the
output of `git help -a` because the latter includes the built-in
commands by virtue of them being listed in command-list.txt.
The bug was detected via a patch series that turns the merge strategies
included in Git into built-in commands: `git merge -s help` relies on
`load_command_list()` to determine the list of available merge
strategies.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A comment mentions that we may free cached delta bases via
find_unresolved_deltas(), but that function went away in f08cbf60fe
(index-pack: make quantum of work smaller, 2020-09-08). Since we need to
rewrite that comment anyway, make the entire comment clearer.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
The type_cas lock lost all of its callers in f08cbf60fe (index-pack:
make quantum of work smaller, 2020-09-08), so we can safely delete it.
The compiler didn't alert us that the variable became unused, because we
still call pthread_mutex_init() and pthread_mutex_destroy() on it.
It's worth considering also whether that commit was in error to remove
the use of the lock. Why don't we need it now, if we did before, as
described in ab791dd138 (index-pack: fix race condition with duplicate
bases, 2014-08-29)? I think the answer is that we now look at and assign
the child_obj->real_type field in the main thread while holding the
work_lock(). So we don't have to worry about racing with the worker
threads.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit f08cbf60fe (index-pack: make quantum of work smaller, 2020-09-08)
refactored the main loop in threaded_second_pass(), but also deleted the
call to display_progress() at the top of the loop. This means that users
typically see no progress at all during the delta resolution phase (and
for large repositories, Git appears to hang).
This looks like an accident that was unrelated to the intended change of
that commit, since we continue to update nr_resolved_deltas in
resolve_delta(). Let's restore the call to get that progress back.
We'll also add a test that confirms we generate the expected progress.
This isn't perfect, as it wouldn't catch a bug where progress was
delayed to the end. That was probably possible to trigger when receiving
a thin pack, because we'd eventually call display_progress() from
fix_unresolved_deltas(), but only once after doing all the work.
However, since our test case generates a complete pack, it reliably
demonstrates this particular bug and its fix. And we can't do better
without making the test racy.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 554544276a (*.[ch]: remove extern from function declarations using
spatch, 2019-04-29), `extern` on function declarations were declared to
be redundant and thus removed from the codebase. An `extern` was
accidentally reintroduced in 08809c09aa (mingw: add a helper function to
attach GDB to the current process, 2020-02-13).
Remove this spurious `extern`.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is the custom to follow minor updates of GitHub Actions
automatically, by using the suffix `@v1`. Actions' maintainers will then
update that `v1` ref to point to the newest.
However, for `microsoft/setup-msbuild`, 889cacb6897 (ci: configure
GitHub Actions for CI/PR, 2020-04-11) uses a very specific `@v1.0.0`
suffix.
In this instance, that is a problem: should `setup-msbuild` release a
new version that intends to fix a critical bug, we won't know it, and we
won't use it.
Such a scenario is not theoretical. It is happening right now:
https://github.blog/changelog/2020-10-01-github-actions-deprecating-set-env-and-add-path-commands
Let's simplify our setup, allowing us to benefit from automatically
using the newest v1.x.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The colors of some ttext widgets are hard-coded. These hard-coded colors
are okay with a light theme but with a dark theme some widgets are dark
colored and the hard-coded ones are still light. This defeats the
purpose of applying the theme and makes the UI look very awkward.
Remove the hard-coded colors in ttext calls and use colors from the
theme for those widgets via Text.Background and Text.Foreground from the
option database.
Similarly, the highlighting for the currently selected file(s) in the
"Staged Files" and "Unstaged Files" sections is also hard-coded. Pull
the colors for that from the current theme to make sure it is in line
Signed-off-by: Serg Tereshchenko <serg.partizan@gmail.com>
Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
|
|
On atomic pushing failure with GnuPG, we expect a very specific output
in stdout due to `--porcelain` switch.
On such failure, we also write down some helpful hint into stderr
in order to help user understand what happens and how to continue from
those failures.
On a lot of system, those hint (in stderr) will be flushed first,
then those messages in stdout will be flushed. In such systems, the
current test code is fine as is.
However, we don't have such guarantee, (at least) there're some real
systems that writes those stream interleaved. On such systems, we may
see the stderr stream written in the middle of stdout stream.
Let's split those stream redirection. By splitting those stream,
the output stream will contain exactly what we want to compare,
thus, saving us a "sed" invocation.
While we're at it, change the `test_i18ncmp` to `test_cmp` because we
will never translate those messages (because of `--porcelain`).
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
Generate po/git.pot from v2.29.0-rc0 for git v2.29.0 l10n round 1.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
