| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a common mistake to put positional arguments before flags when
invoking git-rev-list. Order the positional arguments last.
This patch skips git-rev-list invocations which include the --not flag,
since the ordering of flags and positional arguments affects the
behavior. This patch also skips invocations of git-rev-list that occur
in command substitution in which the exit code is discarded, since
fixing those properly will require a more involved cleanup.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git ... | foo' will mask any errors or crashes in git, so split up such
pipes in this file.
One testcase uses several separate pipe sequences in a row which are
awkward to split up. Wrap the split-up pipe in a function so the
awkwardness is not repeated. Also change that testcase's surrounding
quotes from double to single to avoid premature string interpolation.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some pipes in tests lose the exit code of git processes, which can mask
unexpected behavior like crashes. Split these pipes up so that git
commands are only at the end of pipes rather than the beginning or
middle.
The violations fixed in this patch were found in the process of fixing
pipe placement in a prior patch.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix various places where the ordering was obviously wrong, meaning it
was easy to find with grep.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the following guideline to Documentation/CodingGuidelines:
Break overlong lines after "&&", "||", and "|", not before
them; that way the command can continue to subsequent lines
without backslash at the end.
And the following to t/README (since it is specific to writing tests):
Pipes and $(git ...) should be avoided when they swallow exit
codes of Git processes
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of Don'ts for test writing has grown large such that it is hard
to see at a glance which section an item is in. In other words, if I
ignore a little bit of surrounding context, the "don'ts" look like
"do's."
To make the list more readable, prefix "Don't" in front of every first
sentence in the items.
Also, the "Keep in mind" list is out of place and awkward, because it
was a very short "list" beneath two very long ones, and it seemed easy
to miss under the list of "don'ts," and it only had one item. So move
this item to the list of "do's" and phrase as "Remember..."
Signed-off-by: Matthew DeVore <matvore@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We added faster equality-comparison functions for hashes in
14438c4497 (introduce hasheq() and oideq(), 2018-08-28). A
few topics were in-flight at the time, and can now be
converted. This covers all spots found by "make coccicheck"
in master (the coccicheck results were tweaked by hand for
style).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document for uploadpack.packObjectsHook is added in [1] and consists
of two paragraphs, the second one is quite important about where this
variable can stay.
When the paragraph about uploadpack.allowFilter is added in [2], it's
added in between the two paragraphs. This makes the "this is non-repo
level config" note incorrectly apply to allowFilter instead of
packObjectsHook. Move allowFilter paragraph down to fix this.
[1] 20b20a22f8 (upload-pack: provide a hook for running pack-objects -
2016-05-18)
[2] 10ac85c785 (upload-pack: add object filtering for partial clone -
2017-12-08)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mailing list archive can help a user encountering a bug to tell
whether a recent regression has already been reported and whether a
longstanding bug has already had some discussion to start their
thinking.
Based-on-patch-by: Martin Ågren <martin.agren@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of running `test "foo" = "$(bar)"`, we prefix the whole thing
with `echo`. Comparing to nearby tests makes it clear that this is just
debug leftover. This line has actually been modified four times since it
was introduced in e52290428b (General ref log reading improvements.,
2006-05-19) and the `echo` has always survived. Let's finally drop it.
This script could need some more cleanups. This is just an immediate fix
so that we actually test what we intend to.
All other hits for `git grep "\<echo test " -- t/` seem fine. They want
to create some input or expected output data.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The file processed by `git commit-graph` is referred to as the
"commit-graph file", also with a dash. We have a few references to the
"commit graph file", though, without the dash. These occur in
git-commit-graph.txt as well as in Doc/technical/commit-graph.txt. Fix
them.
Do not change the references to the "commit graph" (without "... file")
as a data structure.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This document sometimes refers to the "commit-graph file" as just "the
graph file". This saves a couple of words here and there at the risk of
confusion. In particular, the documentation for `git commit-graph read`
appears to suggest that there are indeed different types of graph files.
Let's just write out the full name everywhere.
The full name, by the way, is not the dash-less "commit graph file".
Use the dashed form. (The next commit will fix the remaining few
instances of the "commit graph file" in this document.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we're here, fix an instance of "folder" to be "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a couple of bullet items which span multiple lines, and where we
have prefixed each line with a `*`. (This might be the result of a text
editor trying to help.) This results in each line being typeset as a
separate bullet item. Drop the extra `*`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gitcredentials documentation implied that the config file's
"pattern" URL might include a path component, but did not explain that
it must match exactly (potentially leaving readers with the false hope
that it would support a more flexible prefix match).
Signed-off-by: David Zych <dmrz@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit
176ea7479309 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca9c ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As with urls, submodule paths with dashes are ignored by
git, but may end up confusing older versions. Detecting them
via fsck lets us prevent modern versions of git from being a
vector to spread broken .gitmodules to older versions.
Compared to blocking leading-dash urls, though, this
detection may be less of a good idea:
1. While such paths provide confusing and broken results,
they don't seem to actually work as option injections
against anything except "cd". In particular, the
submodule code seems to canonicalize to an absolute
path before running "git clone" (so it passes
/your/clone/-sub).
2. It's more likely that we may one day make such names
actually work correctly. Even after we revert this fsck
check, it will continue to be a hassle until hosting
servers are all updated.
On the other hand, it's not entirely clear that the behavior
in older versions is safe. And if we do want to eventually
allow this, we may end up doing so with a special syntax
anyway (e.g., writing "./-sub" in the .gitmodules file, and
teaching the submodule code to canonicalize it when
comparing).
So on balance, this is probably a good protection.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Urls with leading dashes can cause mischief on older
versions of Git. We should detect them so that they can be
rejected by receive.fsckObjects, preventing modern versions
of git from being a vector by which attacks can spread.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently banned submodule urls that look like
command-line options. This is the matching change to ban
leading-dash paths.
As with the urls, this should not break any use cases that
currently work. Even with our "--" separator passed to
git-clone, git-submodule.sh gets confused. Without the code
portion of this patch, the clone of "-sub" added in t7417
would yield results like:
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
/path/to/git-submodule: 410: cd: Illegal option -s
/path/to/git-submodule: 417: cd: Illegal option -s
Fetched in submodule path '-sub', but it did not contain b56243f8f4eb91b2f1f8109452e659f14dd3fbe4. Direct fetching of that commit failed.
Moreover, naively adding such a submodule doesn't work:
$ git submodule add $url -sub
The following path is ignored by one of your .gitignore files:
-sub
even though there is no such ignore pattern (the test script
hacks around this with a well-placed "git mv").
Unlike leading-dash urls, though, it's possible that such a
path _could_ be useful if we eventually made it work. So
this commit should be seen not as recommending a particular
policy, but rather temporarily closing off a broken and
possibly dangerous code-path. We may revisit this decision
later.
There are two minor differences to the tests in t7416 (that
covered urls):
1. We don't have a "./-sub" escape hatch to make this
work, since the submodule code expects to be able to
match canonical index names to the path field (so you
are free to add submodule config with that path, but we
would never actually use it, since an index entry would
never start with "./").
2. After this patch, cloning actually succeeds. Since we
ignore the submodule.*.path value, we fail to find a
config stanza for our submodule at all, and simply
treat it as inactive. We still check for the "ignoring"
message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught the submodule code to invoke our
"git clone $url $path" with a "--" separator so that we
aren't confused by urls or paths that start with dashes.
However, that's just one code path. It's not clear if there
are others, and it would be an easy mistake to add one in
the future. Moreover, even with the fix in the previous
commit, it's quite hard to actually do anything useful with
such an entry. Any url starting with a dash must fall into
one of three categories:
- it's meant as a file url, like "-path". But then any
clone is not going to have the matching path, since it's
by definition relative inside the newly created clone. If
you spell it as "./-path", the submodule code sees the
"/" and translates this to an absolute path, so it at
least works (assuming the receiver has the same
filesystem layout as you). But that trick does not apply
for a bare "-path".
- it's meant as an ssh url, like "-host:path". But this
already doesn't work, as we explicitly disallow ssh
hostnames that begin with a dash (to avoid option
injection against ssh).
- it's a remote-helper scheme, like "-scheme::data". This
_could_ work if the receiver bends over backwards and
creates a funny-named helper like "git-remote--scheme".
But normally there would not be any helper that matches.
Since such a url does not work today and is not likely to do
anything useful in the future, let's simply disallow them
entirely. That protects the existing "git clone" path (in a
belt-and-suspenders way), along with any others that might
exist.
Our tests cover two cases:
1. A file url with "./" continues to work, showing that
there's an escape hatch for people with truly silly
repo names.
2. A url starting with "-" is rejected.
Note that we expect case (2) to fail, but it would have done
so even without this commit, for the reasons given above.
So instead of just expecting failure, let's also check for
the magic word "ignoring" on stderr. That lets us know that
we failed for the right reason.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we clone a submodule, we call "git clone $url $path".
But there's nothing to say that those components can't begin
with a dash themselves, confusing git-clone into thinking
they're options. Let's pass "--" to make it clear what we
expect.
There's no test here, because it's actually quite hard to
make these names work, even with "git clone" parsing them
correctly. And we're going to restrict these cases even
further in future commits. So we'll leave off testing until
then; this is just the minimal fix to prevent us from doing
something stupid with a badly formed entry.
Reported-by: joernchen <joernchen@phenoelit.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
v2.18.0-rc0~70^2 (mailmap: update brian m. carlson's email address,
2018-05-08) changed the mailmap to map
sandals@crustytoothpaste.ath.cx
-> brian m. carlson <sandals@crustytoothpaste.net>
instead of
sandals@crustytoothpaste.net
-> brian m. carlson <sandals@crustytoothpaste.ath.cx>
That means the mapping
Brian M. Carlson <sandals@crustytoothpaste.ath.cx>
-> brian m. carlson <sandals@crustytoothpaste.net>
is redundant, so we can remove it. More importantly, it means that
the identity "Brian M. Carlson <sandals@crustytoothpaste.net>" used in
some commits is not normalized any more. Add a mapping for it.
Noticed while updating Debian's Git packaging, which uses "git
shortlog --no-merges" to produce a list of changes in each version,
grouped by author's (normalized) name.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
That function is now called "check_connected()", but we forgot to update
this comment in 7043c7071c (check_everything_connected: use a struct
with named options, 2016-07-15).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to a regression introduced by 4fbcca4e "commit-reach: make
can_all_from_reach... linear" the series including b67f6b26
"commit-reach: properly peel tags" was merged to master quickly.
There were a few more cleanups left to apply in the series, which
are included by this change:
1. Clean up a comment that is in the incorrect style.
2. Replace multiple calls to clear_commit_marks() with one call to
clear_commit_marks_many().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
In t5551 we check that we save cookies correctly to a file when
http.cookiefile and http.savecookies are set. To do so we create an
expect file that expects the cookies in a certain order.
However after e2ef8d6fa ("cookies: support creation-time attribute for
cookies", 2018-08-28) in curl.git (released in curl 7.61.1) that order
changed.
We document the file format as "Netscape/Mozilla cookie file
format (see curl(1))", so any format produced by libcurl should be
fine here. Sort the files, to be agnostic to the order of the
cookies, and make the test pass with both curl versions > 7.61.1 and
earlier curl versions.
Reported-by: Todd Zullinger <tmz@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move setup code inside test_expect blocks, to catch unexpected
failures in the setup steps, and bring the test scripts in line with
our modern test style.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The can_all_from_reach_with_flag() method uses 'assign_flag' as a
value we can use to mark objects temporarily during our commit walk.
The intent is that these flags are removed from all objects before
returning. However, this is not the case.
The 'from' array could also contain objects that are not commits, and
we mark those objects with 'assign_flag'. Add a loop to the 'cleanup'
section that removes these markers.
Also, we forgot to free() the memory for 'list', so add that to the
'cleanup' section.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The can_all_from_reach_with_flag() algorithm was refactored in 4fbcca4e
"commit-reach: make can_all_from_reach... linear" but incorrectly
assumed that all objects provided were commits. During a fetch
negotiation, ok_to_give_up() in upload-pack.c may provide unpeeled tags
to the 'from' array. The current code creates a segfault.
Add a direct call to can_all_from_reach_with_flag() in 'test-tool reach'
and add a test in t6600-test-reach.sh that demonstrates this segfault.
Correct the issue by peeling tags when investigating the initial list
of objects in the 'from' array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The caption uses the term "human readable", but the DESCRIPTION did
not explain this in context.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When I read this man page I couldn't figure out what kind of input it
was referring to, or how input was being put into columns, or where I
should look for the syntax of the --mode option.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Is it a CPU architecture? Is it Arch Linux? If you search for "arch
repository", nothing relevant comes up. Let's call it GNU Arch so
people can find it with search engines.
Signed-off-by: Frederick Eaton <frederik@ofb.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit b0db704652 (pathspec: allow querying for attributes -
2017-03-13) adds new pathspec magic 'attr' but only with
match_pathspec(). "git add" has some pathspec related code that still
does not know about 'attr' and will bail out:
$ git add ':(attr:foo)'
fatal: BUG:dir.c:1584: unsupported magic 40
A better solution would be making this code support 'attr'. But I
don't know how much work is needed (I'm not familiar with this new
magic). For now, let's simply reject this magic with a friendlier
message:
$ git add ':(attr:foo)'
fatal: :(attr:foo): pathspec magic not supported by this command: 'attr'
Update t6135 so that the expected error message is from the
"graceful" rejection codepath, not "oops, we were supposed to reject
the request to trigger this magic" codepath.
Reported-by: smaudet@sebastianaudet.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Summary:
merge_file_1() -> merge_mode_and_contents()
merge_content() -> handle_content_merge()
merge_file_1() is a very unhelpful name. Rename it to
merge_mode_and_contents() to reflect what it does.
merge_content() calls merge_mode_and_contents() to do the main part of
its work, but most of this function was about higher level stuff, e.g.
printing out conflict messages, updating skip_worktree bits, checking
for ability to avoid updating the working tree or for D/F conflicts
being in the way, etc. Since there are several handle_*() functions for
similar levels of checking and handling in merge-recursive.c (e.g.
handle_change_delete(), handle_rename_rename_2to1()), let's rename this
function to handle_content_merge().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function names merge_file_one() and merge_file_1() aren't
particularly intuitive function names, especially since there is no
associated merge_file() function that these are related to. The
previous commit showed that merge_file_one() was prone to be called when
merge_file_1() should be, and since it is just a thin wrapper around
merge_file_1() anyway and only has one caller left, let's just remove
merge_file_one() entirely.
(It also turns out that the one remaining caller of merge_file_one()
has very broken code that needs to be completely rewritten, but that's
the subject of a future patch series; for now, we're just translating
it into a merge_file_1() call.)
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge_file_one() is a convenience function taking a bunch of oids and
modes, combining each pair into a diff_filespec, and then calling
merge_file_1(). When we already start with diff_filespec's, we can
just call merge_file_1() directly instead of splitting out the oids
and modes for the wrapper to recombine into what we already had.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
merge_3way() has code to mark different sides of the conflict with info
about where the content comes from. If the names of the files involved
match, it simply uses the branch name. If the names of the files do not
match, it uses branchname:filename. Unfortunately, merge_content()
previously always called it with one.path = a.path = b.path. Granted,
it didn't have other path information available to it for years, but
that was corrected by passing rename_conflict_info in commit
3c217c077a86 ("merge-recursive: Provide more info in conflict markers
with file renames", 2011-08-11). In that commit, instead of just fixing
the bug with the pathnames, it created fake branch names incorporating
both the branch name and file name.
This "fake branch" workaround was extended further when I pulled that
logic out into a special function in commit dac4741554e7
("merge-recursive: Create function for merging with branchname:file
markers", 2011-08-11), and a number of other sites outside of
merge_content() have been added which call into that. However, this
Rube-Goldberg-esque setup is not merely duplicate code and unnecessary
work, it also risked having other callsites invoke it in a way that
would result in markers of the form branchname:filename:filename (i.e.
with the filename repeated).
Fix this whole mess by:
- setting one.path, a.path, and b.path appropriately
- calling merge_file_1() directly
- deleting the merge_file_special_markers() workaround wrapper
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in my recent 7b0f229222 ("commit-graph write: add
progress output", 2018-09-17). The newly added progress output for
"commit-graph write" didn't check the --quiet option.
Do so, and add a test asserting that this works as expected. Since the
TTY prequisite isn't available everywhere let's add a version of this
that both requires and doesn't require that. This test might be overly
specific and will break if new progress output is added, but I think
it'll serve as a good reminder to test the undertested progress
mode(s).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than saying "(see: above)", drop the colon. Also drop the comma
before this note.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After fb0dc3bac1 (builtin/config.c: support `--type=<type>` as preferred
alias for `--<type>`, 2018-04-18) we have a more modern way of spelling
`--bool`.
Update all instances except those that explicitly document the
"historical options" in git-config.txt. The other old-style
type-specifiers already seem to be gone except for in that list of
historical options.
Tweak the grammar a little in config.txt while we are there.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
