| Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we are using --no-index, then our arguments cannot be
revs in the first place. Not only is it pointless to
diagnose them, but if we are not in a repository, we should
not be trying to resolve any names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We disallow the use of revisions with --no-index, but we
don't actually check and complain until well after we've
parsed the revisions.
This is the cause of a few problems:
1. We shouldn't be calling get_sha1() at all when we aren't
in a repository, as it might access the ref or object
databases. For now, this should generally just return
failure, but eventually it will become a BUG().
2. When there's a "--" disambiguator and you're outside a
repository, we'll complain early with "unable to resolve
revision". But we can give a much more specific error.
3. When there isn't a "--" disambiguator, we still do the
normal rev/path checks. This is silly, as we know we
cannot have any revs with --no-index. Everything we see
must be a path.
Outside of a repository this doesn't matter (since we
know it won't resolve), but inside one, we may complain
unnecessarily if a filename happens to also match a
refname.
This patch skips the get_sha1() call entirely in the
no-index case, and behaves as if it failed (with the
exception of giving a better error message).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we see "git grep pattern rev -- file" then we apply the
usual rev/pathspec disambiguation rules: any "rev" before
the "--" must be a revision, and we do not need to apply the
verify_non_filename() check.
But there are two bugs here:
1. We keep a seen_dashdash flag to handle this case, but
we set it in the same left-to-right pass over the
arguments in which we parse "rev".
So when we see "rev", we do not yet know that there is
a "--", and we mistakenly complain if there is a
matching file.
We can fix this by making a preliminary pass over the
arguments to find the "--", and only then checking the rev
arguments.
2. If we can't resolve "rev" but there isn't a dashdash,
that's OK. We treat it like a path, and complain later
if it doesn't exist.
But if there _is_ a dashdash, then we know it must be a
rev, and should treat it as such, complaining if it
does not resolve. The current code instead ignores it
and tries to treat it like a path.
This patch fixes both bugs, and tries to comment the parsing
flow a bit better.
It adds tests that cover the two bugs, but also some related
situations (which already worked, but this confirms that our
fixes did not break anything).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We loop over the arguments, but every branch of the loop
hits either a "continue" or a "break". Surely we can make
this simpler.
The final conditional is:
if (arg is a rev) {
... handle rev ...
continue;
}
break;
We can rewrite this as:
if (arg is not a rev)
break;
... handle rev ...
That makes the flow a little bit simpler, and will make
things much easier to follow when we add more logic in
future patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running a command of the form
git grep --no-index pattern -- path
in the absence of a Git repository, an error message will be printed:
fatal: BUG: setup_git_env called without repository
This is because "git grep" tries to interpret "--" as a rev. "git grep"
has always tried to first interpret "--" as a rev for at least a few
years, but this issue was upgraded from a pessimization to a bug in
commit 59332d1 ("Resurrect "git grep --no-index"", 2010-02-06), which
calls get_sha1 regardless of whether --no-index was specified. This bug
appeared to be benign until commit b1ef400 ("setup_git_env: avoid blind
fall-back to ".git"", 2016-10-20) when Git was taught to die in this
situation. (This "git grep" bug appears to be one of the bugs that
commit b1ef400 is meant to flush out.)
Therefore, always interpret "--" as signaling the end of options,
instead of trying to interpret it as a rev first.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, we set up the threads for grep before parsing
the non-option arguments. In 53b8d931b (grep: disable
threading in non-worktree case, 2011-12-12), the thread code
got bumped lower in the function because it now needed to
know whether we got any revision arguments.
That put a big block of code in between the parsing of revs
and the parsing of pathspecs, both of which share some loop
variables. That makes it harder to read the code than the
original, where the shared loops were right next to each
other.
Let's bump the thread initialization until after all of the
parsing is done.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If you run "git log --graph --name-only", the pathnames are
not indented to go along with their matching commits (unlike
all of the other diff formats). We need to output the line
prefix for each item before writing it.
The tests cover both --name-status and --name-only. The
former actually gets this right already, because it builds
on the --raw format functions. It's only --name-only which
uses its own code (and this fix mirrors the code in
diff_flush_raw()).
Note that the tests don't follow our usual style of setting
up the "expect" output inside the test block. This matches
the surrounding style, but more importantly it is easier to
read: we don't have to worry about embedded single-quotes,
and the leading indentation is more obvious.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the match member of the first pathspec item directly to
read_directory() instead of using common_prefix() to duplicate it first,
thus avoiding memory duplication, strlen(3) and free(3).
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the document patch for f0298cf1c6 (revision walker: include a
detached HEAD in --all - 2009-01-16).
Even though that commit is about detached HEAD, as Jeff pointed out,
always adding HEAD in that case may have subtle differences with
--source or --exclude. So the document mentions nothing about the
detached-ness.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make t7800 easier to debug by capturing output into temporary files and
using test_line_count to make assertions on those files.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "test_line_count" instead of "wc -l", use "git -C" instead of a
subshell, and use test_expect_code when calling difftool. Ease
debugging by capturing output into temporary files.
Suggested-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prior to this, the `--no-gui` option was not documented in the manpage.
This commit introduces this into the manpage
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `verbose` and `expire` options of the `git worktree prune`
subcommand have wrong descriptions in that they pretend to relate to
objects. But as the git-worktree(1) correctly states, these options have
nothing to do with objects but only with worktrees. Fix the description
accordingly.
Signed-off-by: Patrick Steinhardt <patrick.steinhardt@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before 7176a314 (index-pack: complain when --stdin is used outside of a
repo) index-pack silently created a non-existing target directory; now
the command refuses to work unless it's used against a valid repository.
That causes p5302 to fail, which relies on the former behavior. Fix it
by setting up the destinations for its performance tests using git init.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--add-author-from and --use-log-author are for "git svn dcommit",
not "git svn (init|clone)"
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git difftool -h" reports an error:
fatal: BUG: setup_git_env called without repository
Defer repository setup so that the help option processing happens before
the repository is initialized.
Add tests to ensure that the basic usage works inside and outside of a
repository.
Signed-off-by: David Aguilar <davvid@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is often useful to break a commit into multiple parts that are more
logical separations. This can be tricky to learn how to do without the
brute-force method if re-writing code or commit messages from scratch.
Add a section to the git-reset documentation which shows an example
process for how to use git add -p and git commit -c HEAD@{1} to
interactively break a commit apart and re-use the original commit
message as a starting point when making the new commit message.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 55cccf4bb (color_parse_mem: allow empty color spec,
2017-02-01) clearly defined the behavior of an empty color
config variable. Let's document that, and give a hint about
why it might be useful.
It's important not to say that it makes the item uncolored,
because it doesn't. It just sets no attributes, which means
that any previous attributes continue to take effect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commands git-branch and git-tag accept the '--create-reflog'
option, and create reflog even when core.logallrefupdates
configuration is explicitly set not to.
On the other hand, the negated form '--no-create-reflog' is accepted
as a valid option but has no effect (other than overriding an
earlier '--create-reflog' on the command line). This silent noop may
puzzle users. To communicate that this is a known limitation, add a
short note in the manuals for git-branch and git-tag.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command completion for 'git-push --recurse-submodules' already knows to
complete some modes. However, the recently added mode 'only' is missing.
Adding 'only' to the recognized modes completes the list of non-trivial
modes.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add documentation for the `--recurse-submodules=only` option of
git-push. The feature was added in commit 225e8bf (add option to
push only submodules).
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prior to c2f41bf52 (color.c: fix color_parse_mem() with
value_len == 0, 2017-01-19), the empty string was
interpreted as a color "reset". This was an accidental
outcome, and that commit turned it into an error.
However, scripts may pass the empty string as a default
value to "git config --get-color" to disable color when the
value is not defined. The git-add--interactive script does
this. As a result, the script is unusable since c2f41bf52
unless you have color.diff.plain defined (if it is defined,
then we don't parse the empty default at all).
Our test scripts didn't notice the recent breakage because
they run without a terminal, and thus without color. They
never hit this code path at all. And nobody noticed the
original buggy "reset" behavior, because it was effectively
a noop.
Let's fix the code to have an empty color name produce an
empty sequence of color codes. The tests need a few fixups:
- we'll add a new test in t4026 to cover this case. But
note that we need to tweak the color() helper. While
we're there, let's factor out the literal ANSI ESC
character. Otherwise it makes the diff quite hard to
read.
- we'll add a basic sanity-check in t4026 that "git add
-p" works at all when color is enabled. That would have
caught this bug, as well as any others that are specific
to the color code paths.
- 73c727d69 (log --graph: customize the graph lines with
config log.graphColors, 2017-01-19) added a test to
t4202 that checks some "invalid" graph color config.
Since ",, blue" before yielded only "blue" as valid, and
now yields "empty, empty, blue", we don't match the
expected output.
One way to fix this would be to change the expectation
to the empty color strings. But that makes the test much
less interesting, since we show only two graph lines,
both of which would be colorless.
Since the empty-string case is now covered by t4026,
let's remove them entirely here. They're just in the way
of the primary thing the test is supposed to be
checking.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
AsciiDoc uses a configuration file to implement macros like linkgit,
while Asciidoctor uses Ruby extensions. Implement a Ruby extension that
implements the linkgit macro for Asciidoctor in the same way that
asciidoc.conf does for AsciiDoc. Adjust the Makefile to use it by
default.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Switch to dynamic allocation with strbuf, so we can avoid dealing
with magic numbers in the code and reduce the cognitive burden from
the programmers. The original code is correct, but programmers no
longer have to count bytes needed for static allocation to know that.
As a side effect of this change, we also reduce the snprintf()
calls, that may silently truncate results if the programmer is not
careful.
Helped-by: René Scharfe <l.s.r@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The default behavior of update-ref to create reflogs differs in
repositories with worktree and bare ones. The existing tests cover only
the behavior of repositories with worktree.
This commit adds tests that assert the correct behavior in bare
repositories for update-ref. Two cases are covered:
- If core.logAllRefUpdates is not set, no reflogs should be created
- If core.logAllRefUpdates is true, reflogs should be created
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.logallrefupdates is true, we only create a new reflog for refs
that are under certain well-known hierarchies. The reason is that we
know that some hierarchies (like refs/tags) are not meant to change, and
that unknown hierarchies might not want reflogs at all (e.g., a
hypothetical refs/foo might be meant to change often and drop old
history immediately).
However, sometimes it is useful to override this decision and simply log
for all refs, because the safety and audit trail is more important than
the performance implications of keeping the log around.
This patch introduces a new "always" mode for the core.logallrefupdates
option which will log updates to everything under refs/, regardless
where in the hierarchy it is (we still will not log things like
ORIG_HEAD and FETCH_HEAD, which are known to be transient).
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
string_list_clear() handles empty lists just fine, so remove the
redundant check.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach git-completion.bash about the 'diff' option to 'git diff
--submodule=', which was added in Git 2.11.
Signed-off-by: Peter Law <PeterJCLaw@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "init creates a new deep directory (umask vs. shared)" test expects
the permissions of newly created files to be based on the umask, which
fails if a default ACL is inherited from the working tree for git. So
attempt to remove a default ACL if there is one. Same idea as
8ed0a740dd42bd0724aebed6e3b07c4ea2a2d5e8. (I guess I'm the only one who
ever runs the test suite with a default ACL set.)
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running git-p4 on Windows, with multiple git-p4.mapUser entries in
git config - no user mappings are applied to the generated repository.
Reproduction Steps:
1. Add multiple git-p4.mapUser entries to git config on a Windows
machine
2. Attempt to clone a p4 repository
None of the user mappings will be applied.
This issue is actually caused by gitConfigList, using split(os.linesep)
to convert the output of git config --get-all into a list. On Windows,
os.linesep is equal to '\r\n' - however git.exe returns configuration
with a line seperator of '\n'.
This leads to the list returned by gitConfigList containing only one
element - which contains the full output of git config --get-all in
string form, which causes problems for the code introduced to
getUserMapFromPerforceServer in 10d08a149d ("git-p4: map a P4 user to
Git author name and email address", 2016-03-01)
This issue should be caught by the test introduced in 10d08a1, however
would require running on Windows to reproduce.
Using splitlines solves this issue, by splitting config on all
typical delimiters ('\n', '\r\n' etc.)
Signed-off-by: George Vanburgh <gvanburgh@bloomberg.net>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, executables need to have the file extension `.exe`, or they
are not executables. Hence, to support scripts, Git for Windows also
looks for a she-bang line by opening the file in question, and executing
it via the specified script interpreter.
To figure out whether files in the `PATH` are executable, `git help` has
code that imitates this behavior. With one exception: it *always* opens
the files and looks for a she-bang line *or* an `MZ` tell-tale
(nevermind that files with the magic `MZ` but without file extension
`.exe` would still not be executable).
Opening this many files leads to performance problems that are even more
serious when a virus scanner is running. Therefore, let's change the
code to look for the file extension `.exe` early, and avoid opening the
file altogether if we already know that it is executable.
See the following measurements (in seconds) as an example, where we
execute a simple program that simply lists the directory contents and
calls open() on every listed file:
With virus scanner running (coldcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.412873
before open (git-annotate.exe): 0.000175
after open (git-annotate.exe): 0.397925
before open (git-apply.exe): 0.000243
after open (git-apply.exe): 0.399996
before open (git-archive.exe): 0.000147
after open (git-archive.exe): 0.397783
before open (git-bisect--helper.exe): 0.000160
after open (git-bisect--helper.exe): 0.397700
before open (git-blame.exe): 0.000160
after open (git-blame.exe): 0.399136
...
With virus scanner running (hotcache):
$ ./a.exe /libexec/git-core/
before open (git-add.exe): 0.000000
after open (git-add.exe): 0.000325
before open (git-annotate.exe): 0.000229
after open (git-annotate.exe): 0.000177
before open (git-apply.exe): 0.000167
after open (git-apply.exe): 0.000150
before open (git-archive.exe): 0.000154
after open (git-archive.exe): 0.000156
before open (git-bisect--helper.exe): 0.000132
after open (git-bisect--helper.exe): 0.000180
before open (git-blame.exe): 0.000718
after open (git-blame.exe): 0.000724
...
With this patch I get:
$ time git help git
Launching default browser to display HTML ...
real 0m8.723s
user 0m0.000s
sys 0m0.000s
and without
$ time git help git
Launching default browser to display HTML ...
real 1m37.734s
user 0m0.000s
sys 0m0.031s
both tests with cold cache and giving the machine some time to settle
down after restart.
[jes: adjusted the commit message]
Signed-off-by: Heiko Voigt <heiko.voigt@mahr.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Executable files in Windows need to have the extension '.exe', otherwise
they do not work. Extend the hooks to not just look at the hard coded
names, but also at the names extended by the custom STRIP_EXTENSION,
which is defined as '.exe' in Windows.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The documentation for submission discourages pgp-signing, but demands
a proper sign-off by contributors. However, when skimming the headings,
the wording of the section for sign-off could mistakenly be understood
as concerning pgp-signing. Thus, new contributors could oversee the
necessary sign-off.
This commit improves the wording such that the section about sign-off
cannot be misunderstood as pgp-signing. In addition, the paragraph about
pgp-signing is changed such that it avoids the impression that
pgp-signing could be relevant at later stages of the submission.
Signed-off-by: Cornelius Weig <cornelius.weig@tngtech.com>
Helped-by: Philip Oakley <philipoakley@iee.org>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Eric Wong reported that while FreeBSD has a /usr/bin/unzip, it uses
different semantics from those that are needed by Git's tests: When
passing the -a option to Info-Zip, it heeds the text attribute of the
.zip file's central directory, while FreeBSD's unzip ignores that
attribute.
The common work-around is to install Info-Zip on FreeBSD, into
/usr/local/bin/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Tested-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch automates the process of determining which tests failed
previously and re-running them.
While developing patch series, it is a good practice to run the test
suite from time to time, just to make sure that obvious bugs are caught
early. With complex patch series, it is common to run `make -j15 -k
test`, i.e. run the tests in parallel and *not* stop at the first
failing test but continue. This has the advantage of identifying
possibly multiple problems in one big test run.
It is particularly important to reduce the turn-around time thusly on
Windows, where the test suite spends 45 minutes on the computer on which
this patch was developed.
It is the most convenient way to determine which tests failed after
running the entire test suite, in parallel, to look for left-over "trash
directory.t*" subdirectories in the t/ subdirectory. However, those
directories might live outside t/ when overridden using the
--root=<directory> option, to which the Makefile has no access. The next
best method is to grep explicitly for failed tests in the test-results/
directory, which the Makefile *can* access.
Please note that the often-recommended `prove` tool requires Perl, and
that opens a whole new can of worms on Windows. As no native Windows Perl
comes with Subversion bindings, we have to use a Perl in Git for Windows
that uses the POSIX emulation layer named MSYS2 (which is a portable
version of Cygwin). When using this emulation layer under stress, e.g.
when running massively-parallel tests, unexplicable crashes occur quite
frequently, and instead of having a solution to the original problem, the
developer now has an additional, quite huge problem. For that reason, this
developer rejected `prove` as a solution and went with this patch instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the semantic patch for converting callers that duplicate the
result of absolute_path() to call absolute_pathdup() instead, which
avoids an extra string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a function that returns a buffer containing the absolute path of its
argument and a semantic patch for its intended use. It avoids an extra
string copy to a static buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some developers might want to call `git status` in a working
directory where they just started an interactive rebase, but the
edit script is still opened in the editor.
Let's show a meaningful message in such cases.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 1b4735d9f3 (submodule: no [--merge|--rebase] when newly cloned,
2011-02-17), all actions were defaulted to checkout for populating
a submodule initially, because merging or rebasing makes no sense
in that situation.
Other commands however do make sense, such as the custom command
that was added later (6cb5728c43, submodule update: allow custom
command to update submodule working tree, 2013-07-03).
I am unsure about the "none" command, as I can see an initial
checkout there as a useful thing. On the other hand going strictly
by our own documentation, we should do nothing in case of "none"
as well, because the user asked for it.
Reported-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
