| Commit message (Collapse) | Author | Files | Lines |
|---|
|
The loop in warn_conflicted_path() that checks for the count of
entries with the same path uses "i+count" for the array
entry. However, the loop only verifies that the value of count is
below the array size. Fix this by adding i to the condition.
I hit this condition during a test of the in-tree sparse-checkout
feature, so it is exercised by the end of the series.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
[jc: readability fix]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert submodule subcommand 'set-url' to a builtin. Port 'set-url' to
'submodule--helper.c' and call the latter via 'git-submodule.sh'.
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* We need a `final_new_line` to make our source code as text file, per
POSIX and C specification.
* `bloom_filters` should be limited to interal linkage only
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Document protocol changes after CVE-2020-11008, including the removal of
references to the override of attributes which is no longer recommended
after CVE-2020-5260 and that might be removed in the future.
While at it do some improvements for clarity and consistency.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clarify the expected effect of all attributes and how the helpers
are expected to handle them and the context where they operate.
While at it, space the descriptions for clarity, and add a paragraph
mentioning the early termination in the list processing of helpers,
to complement the one about the special "quit" attribute.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
662f9cf154 (tests: when run in Bash, annotate test failures with file
name/line number, 2020-04-11), introduces a way to report the location
(file:lineno) of a failed test case by traversing the bash callstack.
The implementation requires bash and uses shell arrays and is therefore
protected by a guard but NetBSD sh will still have to parse the function
and therefore will result in:
** t0000-basic.sh ***
./test-lib.sh: 681: Syntax error: Bad substitution
Enclose the bash specific code inside an eval to avoid parsing errors in
the same way than 5826b7b595 (test-lib: check Bash version for '-x'
without using shell arrays, 2019-01-03)
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
3f824e91c8 (t/Makefile: introduce TEST_SHELL_PATH, 2017-12-08) allows for
setting a shell for running the tests, but the generated subtests weren't
updated.
Correct that and while at it update it to use write_script.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on the workflows of individual developers, it can either be
convenient or annoying that our GitHub Actions CI jobs are run on every
branch. As an example of annoying: if you carry many half-finished
work-in-progress branches and rebase them frequently against master,
you'd get tons of failure reports that aren't interesting (not to
mention the wasted CPU).
This commit adds a new job which checks a special branch within the
repository for CI config, and then runs a shell script it finds there to
decide whether to skip the rest of the tests. The default will continue
to run tests for all refs if that branch or script is missing.
There have been a few alternatives discussed:
One option is to carry information in the commit itself about whether it
should be tested, either in the tree itself (changing the workflow YAML
file) or in the commit message (a "[skip ci]" flag or similar). But
these are frustrating and error-prone to use:
- you have to manually apply them to each branch that you want to mark
- it's easy for them to leak into other workflows, like emailing patches
We could likewise try to get some information from the branch name. But
that leads to debates about whether the default should be "off" or "on",
and overriding still ends up somewhat awkward. If we default to "on",
you have to remember to name your branches appropriately to skip CI. And
if "off", you end up having to contort your branch names or duplicate
your pushes with an extra refspec.
By comparison, this commit's solution lets you specify your config once
and forget about it, and all of the data is off in its own ref, where it
can be changed by individual forks without touching the main tree.
There were a few design decisions that came out of on-list discussion.
I'll summarize here:
- we could use GitHub's API to retrieve the config ref, rather than a
real checkout (and then just operate on it via some javascript). We
still have to spin up a VM and contact GitHub over the network from
it either way, so it ends up not being much faster. I opted to go
with shell to keep things similar to our other tools (and really
could implement allow-refs in any language you want). This also makes
it easy to test your script locally, and to modify it within the
context of a normal git.git tree.
- we could keep the well-known refname out of refs/heads/ to avoid
cluttering the branch namespace. But that makes it awkward to
manipulate. By contrast, you can just "git checkout ci-config" to
make changes.
- we could assume the ci-config ref has nothing in it except config
(i.e., a branch unrelated to the rest of git.git). But dealing with
orphan branches is awkward. Instead, we'll do our best to efficiently
check out only the ci/config directory using a shallow partial clone,
which allows your ci-config branch to be just a normal branch, with
your config changes on top.
- we could provide a simpler interface, like a static list of ref
patterns. But we can't get out of spinning up a whole VM anyway, so
we might as well use that feature to make the config as flexible as
possible. If we add more config, we should be able to reuse our
partial-clone to set more outputs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These commands take the --quiet option for their own operation, but
they forget to pass the option down when they invoke "git gc --auto"
internally.
Teach them to do so using the run_auto_gc() helper we added in the
previous step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Back in 1991006c (fetch: convert argv_gc_auto to struct argv_array,
2014-08-16), we taught "git fetch --quiet" to pass the "--quiet"
option down to "gc --auto". This issue, however, is not limited to
"fetch":
$ git grep -e 'gc.*--auto' \*.c
finds hits in "am", "commit", "merge", and "rebase" and these
commands do not pass "--quiet" down to "gc --auto" when they
themselves are told to be quiet.
As a preparatory step, let's introduce a helper function
run_auto_gc(), that the caller can pass a boolean "quiet",
and redo the fix to "git fetch" using the helper.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an issue in 'Common Issues' section which addresses the confusion
between performing a 'fetch' and a 'pull'.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
gitcredentials(7) already mentions several possible invocations that one
can use as the value for credential.helper. However, many people are
not aware that there are other options than a simple credential helper
name, so let's place some explanatory text in the documentation for
credential.helper as well.
We still refer the user to gitcredential(7) for additional explanations
and helpful examples.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add issue in 'Common Issues' section which addresses the problem of
Git tracking files/paths mentioned in '.gitignore'.
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In documentation pertaining to autostash behavior, we refer to the
"stash reflog". This description is too low-level as the reflog refers
to an implementation detail of how the stash works and, for end-users,
they do not need to be aware of this at all.
Change references of "stash reflog" to "stash list", which should
provide more accessible terminology for end-users.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, files are restored from the index for --worktree, and from
HEAD for --staged. When --worktree and --staged are combined, --source
must be specified to disambiguate the restore source[1], thus making it
cumbersome to restore a file in both the worktree and the index.
However, HEAD is also a reasonable default for --worktree when combined
with --staged, so make it the default anytime --staged is used (whether
combined with --worktree or not).
[1]: Due to an oversight, the --source requirement, though documented,
is not actually enforced.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fabec2c5c3 (builtin/receive-pack: switch to use the_hash_algo, 2019-08-18)
renames hmac_sha1 to hmac, as it was updated to use the hash function used
by git (which won't be sha1 in the future).
hmac() is provided by NetBSD >= 8 libc and therefore conflicts as shown by :
builtin/receive-pack.c:421:13: error: conflicting types for 'hmac'
static void hmac(unsigned char *out,
^~~~
In file included from ./git-compat-util.h:172:0,
from ./builtin.h:4,
from builtin/receive-pack.c:1:
/usr/include/stdlib.h:305:10: note: previous declaration of 'hmac' was here
ssize_t hmac(const char *, const void *, size_t, const void *, size_t, void *,
^~~~
Rename it again to hmac_hash to reflect it will use the git's defined hash
function and avoid the conflict, while at it update a comment to better
describe the HMAC function that was used.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the beginning in 118250728e (credential: apply helper config,
2011-12-10), the declaration for that function used a different order
than the implementation.
All callers use the same order than the implementation, so update
the declaration in credential.h to match.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
c44088ecc4 (credential: treat URL without scheme as invalid, 2020-04-18)
changes the implementation for this function to return -1 if protocol is
missing.
Update blurb to match implementation.
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes a bitmap traversal still has to walk some commits manually,
because those commits aren't included in the bitmap packfile (e.g., due
to a push or commit since the last full repack). If we're given an
object filter, we don't pass it down to this traversal. It's not
necessary for correctness because the bitmap code has its own filters to
post-process the bitmap result (which it must, to filter out the objects
that _are_ mentioned in the bitmapped packfile).
And with blob filters, there was no performance reason to pass along
those filters, either. The fill-in traversal could omit them from the
result, but it wouldn't save us any time to do so, since we'd still have
to walk each tree entry to see if it's a blob or not.
But now that we support tree filters, there's opportunity for savings. A
tree:depth=0 filter means we can avoid accessing trees entirely, since
we know we won't them (or any of the subtrees or blobs they point to).
The new test in p5310 shows this off (the "partial bitmap" state is one
where HEAD~100 and its ancestors are all in a bitmapped pack, but
HEAD~100..HEAD are not). Here are the results (run against linux.git):
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------
[...]
5310.16: rev-list with tree filter (partial bitmap) 0.19(0.17+0.02) 0.03(0.02+0.01) -84.2%
The absolute number of savings isn't _huge_, but keep in mind that we
only omitted 100 first-parent links (in the version of linux.git here,
that's 894 actual commits). In a more pathological case, we might have a
much larger proportion of non-bitmapped commits. I didn't bother
creating such a case in the perf script because the setup is expensive,
and this is plenty to show the savings as a percentage.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous patch, we made it easy to define other filters that
exclude all objects of a certain type. Use that in order to implement
bitmap-level filtering for the '--filter=tree:<n>' filter when 'n' is
equal to 0.
The general case is not helped by bitmaps, since for values of 'n > 0',
the object filtering machinery requires a full-blown tree traversal in
order to determine the depth of a given tree. Caching this is
non-obvious, too, since the same tree object can have a different depth
depending on the context (e.g., a tree was moved up in the directory
hierarchy between two commits).
But, the 'n = 0' case can be helped, and this patch does so. Running
p5310.11 in this tree and on master with the kernel, we can see that
this case is helped substantially:
Test master this tree
--------------------------------------------------------------------------------
5310.11: rev-list count with tree:0 10.68(10.39+0.27) 0.06(0.04+0.01) -99.4%
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 4f3bd5606a (pack-bitmap: implement BLOB_NONE filtering, 2020-02-14),
filtering support for bitmaps was added for the 'LOFC_BLOB_NONE' filter.
In the future, we would like to add support for filters that behave as
if they exclude a certain type of object, for e.g., the tree depth
filter with depth 0.
To prepare for this, make some of the functions used for filtering more
generic, such as 'find_tip_blobs' and 'filter_bitmap_blob_none' so that
they can work over arbitrary object types.
To that end, create 'find_tip_objects' and
'filter_bitmap_exclude_type', and redefine the aforementioned functions
in terms of those.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In most callers, we have an actual list_objects_filter_options struct,
and if no filtering is desired its "choice" element will be
LOFC_DISABLED. However, some code may have only a pointer to such a
struct which may be NULL (because _their_ callers didn't care about
filtering, either). Rather than forcing them to handle this explicitly
like:
if (filter_options)
traverse_commit_list_filtered(filter_options, revs,
show_commit, show_object,
show_data, NULL);
else
traverse_commit_list(revs, show_commit, show_object,
show_data);
let's just treat a NULL filter_options the same as LOFC_DISABLED. We
only need a small change, since that option struct is converted into a
real filter only in the "init" function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A fuzzer running on the entry point provided by fuzz-commit-graph.c
revealed a memory leak when parse_commit_graph() creates a struct
bloom_filter_settings and then returns early due to error. Fix that
error by always freeing that struct first (if it exists) before
returning early due to error.
While making that change, I also noticed another possible memory leak -
when the BLOOMDATA chunk is provided but not BLOOMINDEXES. Also fix that
error.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 9e468334b4 (ref-filter: fallback on alphabetical comparison,
2015-10-30) taught ref-filter's sort to fallback to comparing refnames.
But it did it at the wrong level, overriding the comparison result for a
single "--sort" key from the user, rather than after all sort keys have
been exhausted.
This worked correctly for a single "--sort" option, but not for multiple
ones. We'd break any ties in the first key with the refname and never
evaluate the second key at all.
To make matters even more interesting, we only applied this fallback
sometimes! For a field like "taggeremail" which requires a string
comparison, we'd truly return the result of strcmp(), even if it was 0.
But for numerical "value" fields like "taggerdate", we did apply the
fallback. And that's why our multiple-sort test missed this: it uses
taggeremail as the main comparison.
So let's start by adding a much more rigorous test. We'll have a set of
commits expressing every combination of two tagger emails, dates, and
refnames. Then we can confirm that our sort is applied with the correct
precedence, and we'll be hitting both the string and value comparators.
That does show the bug, and the fix is simple: moving the fallback to
the outer compare_refs() function, after all ref_sorting keys have been
exhausted.
Note that in the outer function we don't have an "ignore_case" flag, as
it's part of each individual ref_sorting element. It's debatable what
such a fallback should do, since we didn't use the user's keys to match.
But until now we have been trying to respect that flag, so the
least-invasive thing is to try to continue to do so. Since all callers
in the current code either set the flag for all keys or for none, we can
just pull the flag from the first key. In a hypothetical world where the
user really can flip the case-insensitivity of keys separately, we may
want to extend the code to distinguish that case from a blanket
"--ignore-case".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the ref-filter users (for-each-ref, branch, and tag) take an
--ignore-case option which makes filtering and sorting case-insensitive.
However, this option was applied only to the first element of the
ref_sorting list. So:
git for-each-ref --ignore-case --sort=refname
would do what you expect, but:
git for-each-ref --ignore-case --sort=refname --sort=taggername
would sort the primary key (taggername) case-insensitively, but sort the
refname case-sensitively. We have two options here:
- teach callers to set ignore_case on the whole list
- replace the ref_sorting list with a struct that contains both the
list of sorting keys, as well as options that apply to _all_
keys
I went with the first one here, as it gives more flexibility if we later
want to let the users set the flag per-key (presumably through some
special syntax when defining the key; for now it's all or nothing
through --ignore-case).
The new test covers this by sorting on both tagger and subject
case-insensitively, which should compare "a" and "A" identically, but
still sort them before "b" and "B". We'll break ties by sorting on the
refname to give ourselves a stable output (this is actually supposed to
be done automatically, but there's another bug which will be fixed in
the next commit).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the error condition when updating the sparse-checkout leaves
an empty working directory.
This behavior was added in 9e1afb167 (sparse checkout: inhibit empty
worktree, 2009-08-20). The comment was added in a7bc906f2 (Add
explanation why we do not allow to sparse checkout to empty working
tree, 2011-09-22) in response to a "dubious" comment in 84563a624
(unpack-trees.c: cosmetic fix, 2010-12-22).
With the recent "cone mode" and "git sparse-checkout init [--cone]"
command, it is common to set a reasonable sparse-checkout pattern
set of
/*
!/*/
which matches only files at root. If the repository has no such files,
then their "git sparse-checkout init" command will fail.
Now that we expect this to be a common pattern, we should not have the
commands fail on an empty working directory. If it is a confusing
result, then the user can recover with "git sparse-checkout disable"
or "git sparse-checkout set". This is especially simple when using cone
mode.
Reported-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The advice to use "$x" rather than "x" in arithmetric expansion was
working around a dash bug fixed in 0.5.4. Even Debian oldstable has
0.5.8 these days. And in the meantime, we've added almost two dozen
instances of the "x" form which you can find with:
git grep '$(([a-z]'
and nobody seems to have complained. Let's declare this workaround
obsolete and simplify our style guide.
Helped-by: Danh Doan <congdanhqx@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the added checks for invalid URLs in credentials, any locally
modified store files which might have empty lines or even comments
were reported[1] failing to parse as valid credentials.
Instead of doing a hard check for credentials, do a soft one and
therefore avoid the reported fatal error.
While at it add tests for all known corruptions that are currently
ignored to keep track of them and avoid the risk of regressions.
[1] https://stackoverflow.com/a/61420852/5005936
Reported-by: Dirk <dirk@ed4u.de>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Based-on-patch-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's typical to find Markdown documentation alongside source code, and
having better context for documentation changes is useful; see also
commit 69f9c87d4 (userdiff: add support for Fountain documents,
2015-07-21).
The pattern is based on the CommonMark specification 0.29, section 4.2
<https://spec.commonmark.org/> but doesn't match empty headings, as
seeing them in a hunk header is unlikely to be useful.
Only ATX headings are supported, as detecting setext headings would
require printing the line before a pattern matches, or matching a
multiline pattern. The word-diff pattern is the same as the pattern for
HTML, because many Markdown parsers accept inline HTML.
Signed-off-by: Ash Holland <ash@sorrel.sh>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's an example of using your own bit of shell to act as a credential
helper, but it's not very realistic:
- It's stupid to hand out your secret password to _every_ host. In the
real world you'd use the config-matcher to limit it to a particular
host.
- We never provided a username. We can easily do that in another config
option (you can do it in the helper, too, but this is much more
readable).
- We were sending the secret even for store/erase operations. This
is OK because Git would just ignore it, but a real system would
probably be unlocking a password store, which you wouldn't want to do
more than necessary.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We give several helper config examples, but don't make clear that these
are raw values. It's up to the user to add the appropriate quoting to
put them into a config file (either by running with "git config" and
quoting against the shell, or by adding double-quotes as appropriate
within the git-config file).
Let's flesh them out as full config blocks, which makes the syntax more
clear (and makes it possible for people to just cut-and-paste them as a
starting point). I added double-quotes to any values larger than a
single word. That isn't strictly necessary in all cases, but it
sidesteps explaining the rules about exactly when you need to quote a
value.
The existing quotes can be converted to single-quotes in one instance,
and backslash-esccaped in the other. I also swapped out backticks for
our preferred $().
Reported-by: douglas.fuller@gmail.com
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In previous patches, the functions 'commit_shallow_file' and
'rollback_shallow_file' were introduced to reset the shallowness
validity checks on a repository after potentially modifying
'.git/shallow'.
These functions can be made safer by wrapping the 'struct lockfile *' in
a new type, 'shallow_lock', so that they cannot be called with a raw
lock (and potentially misused by other code that happens to possess a
lockfile, but has nothing to do with shallowness).
This patch introduces that type as a thin wrapper around 'struct
lockfile', and updates the two aforementioned functions and their
callers to use it.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When 'commit_shallow_file()' and 'rollback_shallow_file()' were
introduced, they did not have a documenting comment, when they could
have benefited from one.
Add a brief note about what these functions do, and make a special note
that they reset stat-validity checks.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are many functions in commit.h that are more related to shallow
repositories than they are to any sort of generic commit machinery.
Likely this began when there were only a few shallow-related functions,
and commit.h seemed a reasonable enough place to put them.
But, now there are a good number of shallow-related functions, and
placing them all in 'commit.h' doesn't make sense.
This patch extracts a 'shallow.h', which takes all of the declarations
from 'commit.h' for functions which already exist in 'shallow.c'. We
will bring the remaining shallow-related functions defined in 'commit.c'
in a subsequent patch.
For now, move only the ones that already are implemented in 'shallow.c',
and update the necessary includes.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next patch, some functions will be moved from 'commit.c' to have
prototypes in a new 'shallow.h' and their implementations in
'shallow.c'.
Three functions in 'commit.c' use 'commit_graft_pos()' (they are
'register_commit_graft()', 'lookup_commit_graft()', and
'unregister_shallow()'). The first two of these will stay in 'commit.c',
but the latter will move to 'shallow.c', and thus needs
'commit_graft_pos' to be non-static.
Prepare for that by making 'commit_graft_pos' non-static so that it can
be called from both 'commit.c' and 'shallow.c'.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In d787d311db (checkout: split part of it to new command 'switch',
2019-03-29), the `git switch` command was created by extracting the
common functionality of cmd_checkout() in checkout_main(). However, in
b7b5fce270 (switch: better names for -b and -B, 2019-03-29), the branch
creation and force creation options for 'switch' were changed to -c and
-C, respectively. As a result of this, error messages and comments that
previously referred to `-b` and `-B` became invalid for `git switch`.
For error messages that refer to `-b` and `-B`, use a format string
instead so that `-c` and `-C` can be printed when `git switch` is
invoked.
Reported-by: Robert Simpson
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 7a9ce0269bc0f4ef230f930b3910b70ac3142552,
which has not yet gained consensus.
|
|
In a previous commit, we made incremental graph layers read-only by
using 'git_mkstemp_mode' with permissions '0444'.
There is no reason that 'commit-graph-chain's should be modifiable by
the user, since they are generated at a temporary location and then
atomically renamed into place.
To ensure that these files are read-only, too, use
'hold_lock_file_for_update_mode' with the same read-only permission
bits, and let the umask and 'adjust_shared_perm' take care of the rest.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Non-layered commit-graphs use 'adjust_shared_perm' to make the
commit-graph file readable (or not) to a combination of the user, group,
and others.
Call 'adjust_shared_perm' for split-graph layers to make sure that these
also respect 'core.sharedRepository'. The 'commit-graph-chain' file
already respects this configuration since it uses
'hold_lock_file_for_update' (which calls 'adjust_shared_perm' eventually
in 'create_tempfile_mode').
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the previous commit, Git learned 'hold_lock_file_for_update_mode' to
allow the caller to specify the permission bits (prior to further
adjustment by the umask and shared repository permissions) used when
acquiring a temporary file.
Use this in the commit-graph machinery for writing a non-split graph to
acquire an opened temporary file with permissions read-only permissions
to match the split behavior. (In the split case, Git uses
git_mkstemp_mode' for each of the commit-graph layers with permission
bits '0444').
One can notice this discrepancy when moving a non-split graph to be part
of a new chain. This causes a commit-graph chain where all layers have
read-only permission bits, except for the base layer, which is writable
for the current user.
Resolve this discrepancy by using the new
'hold_lock_file_for_update_mode' and passing the desired permission
bits.
Doing so causes some test fallout in t5318 and t6600. In t5318, this
occurs in tests that corrupt a commit-graph file by writing into it. For
these, 'chmod u+w'-ing the file beforehand resolves the issue. The
additional spot in 'corrupt_graph_verify' is necessary because of the
extra 'git commit-graph write' beforehand (which *does* rewrite the
commit-graph file). In t6600, this is caused by copying a read-only
commit-graph file into place and then trying to replace it. For these,
make these files writable.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the patches for CVE-2020-11008, the ability to specify credential
settings in the config for partial URLs got lost. For example, it used
to be possible to specify a credential helper for a specific protocol:
[credential "https://"]
helper = my-https-helper
Likewise, it used to be possible to configure settings for a specific
host, e.g.:
[credential "dev.azure.com"]
useHTTPPath = true
Let's reinstate this behavior.
While at it, increase the test coverage to document and verify the
behavior with a couple other categories of partial URLs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reading a malformed credential URL line and silently ignoring it
does not mean that we support empty lines and/or "# commented" lines
forever. We should document it to avoid confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Just like 47abd85ba0 (fetch: Strip usernames from url's before storing
them, 2009-04-17) and later 882d49ca5c (push: anonymize URL in status
output, 2016-07-13), and even later c1284b21f243 (curl: anonymize URLs
in error messages and warnings, 2019-03-04) this change anonymizes URLs
(read: strips them of user names and especially passwords) in
user-facing error messages and warnings.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In a03b55530a (merge: teach --autostash option, 2020-04-07), the
--autostash option was introduced for `git merge`. Notably, when
`git merge --quit` is run with an autostash entry present, it is saved
into the stash reflog. This is contrasted with the current behaviour of
`git rebase --quit` where the autostash entry is simply just dropped out
of existence.
Adopt the behaviour of `git merge --quit` in `git rebase --quit` and
save the autostash entry into the stash reflog instead of just deleting
it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the usage for `git push` is shown, it includes the following
lines
--recurse-submodules[=(check|on-demand|no)]
control recursive pushing of submodules
which seem to indicate that the argument for --recurse-submodules is
optional. However, we cannot actually run that optiion without an
argument:
$ git push --recurse-submodules
fatal: recurse-submodules missing parameter
Unset PARSE_OPT_OPTARG so that it is clear that this option requires an
argument. Since the parse-options machinery guarantees that an argument
is present now, assume that `arg` is set in the else of
option_parse_recurse_submodules().
Reported-by: Andrew White <andrew.white@audinate.com>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
