| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of our code of conduct, we maintain a list of active members on
the Project Leadership Committee, which serves a couple of purposes. The
details are in 3f9ef874a7 (CODE_OF_CONDUCT: mention individual
project-leader emails, 2019-09-26), but the gist is as follows:
- It makes it clear that people with a CoC complaint may contact
members individually as opposed to the general PLC list (in case the
subject of their complaint has to do with one of the committee
members).
- It also serves as the de-facto list of people on the PLC, which
isn't committed anywhere else in the tree.
As of [1], Peff is no longer a member of Git's Project Leadership
Committee. Let's update the list of active members accordingly [2].
This also gives us a convenient opportunity to thank Peff for his many
years of service on the PLC, during which he helped the Git community in
more ways than we can easily list here.
[1]: https://lore.kernel.org/git/YboaAe4LWySOoAe7@coredump.intra.peff.net/
[2]: https://lore.kernel.org/git/CAP8UFD2XxP9r3PJ4GQjxUbV=E1ASDq1NDgB-h+S=v-bZQ7DYwQ@mail.gmail.com/
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is another simple change with a long explanation...
merge-recursive and merge-ort are both based on the same recursive idea:
if there is more than one merge base, merge the merge bases (which may
require first merging the merge bases of the merges bases, etc.). The
depth of the inner merge is recorded via a variable called "call_depth",
which we'll bring up again later. Naturally, the inner merges
themselves can have conflicts and various messages generated about those
files.
merge-recursive immediately prints to stdout as it goes, at the risk of
printing multiple conflict notices for the same path separated far apart
from each other with many intervenining conflict notices for other paths
between them. And this is true even if there are no inner merges
involved. An example of this was given in [1] and apparently caused
some confusion:
CONFLICT (rename/add): Rename A->B in HEAD. B added in otherbranch
...dozens of conflicts for OTHER paths...
CONFLICT (content): Merge conflicts in B
In contrast, merge-ort collects messages and stores them by path so that
it can print them grouped by path. Thus, the same case handled by
merge-ort would have output of the form:
CONFLICT (rename/add): Rename A->B in HEAD. B added in otherbranch
CONFLICT (content): Merge conflicts in B
...dozens of conflicts for OTHER paths...
This is generally helpful, but does make a separate bug more
problematic. In particular, while merge-recursive might report the
following for a recursive merge:
Auto-merging dir.c
Auto-merging midx.c
CONFLICT (content): Merge conflict in midx.c
Auto-merging diff.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
merge-ort would instead report:
Auto-merging diff.c
Auto-merging dir.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
Auto-merging midx.c
CONFLICT (content): Merge conflict in midx.c
The fact that messages for the same file are together is probably
helpful in general, but with the indentation missing for the inner
merge it unfortunately serves to confuse. This probably would lead
users to wonder:
* Why is Git reporting that "dir.c" is being merged twice?
* If midx.c has conflicts, why do I not see any when I open up the
file and why are no conflicts shown in the index?
Fix this output confusion by changing the output to clearly
differentiate the messages for outer merges from the ones for inner
merges, changing the above output from merge-ort to:
Auto-merging diff.c
From inner merge: Auto-merging dir.c
Auto-merging dir.c
CONFLICT (content): Merge conflict in dir.c
From inner merge: Auto-merging midx.c
From inner merge: CONFLICT (content): Merge conflict in midx.c
(Note: the number of spaces after the 'From inner merge:' is
2*call_depth).
One other thing to note here, that I didn't notice until typing up this
commit message, is that merge-recursive does not print any messages from
the inner merges by default; the extra verbosity has to be requested.
merge-ort currently has no verbosity controls and always prints these.
We may also want to change that, but for now, just make the output
clearer with these extra markings and indentation.
[1] https://lore.kernel.org/git/CAGyf7-He4in8JWUh9dpAwvoPkQz9hr8nCBpxOxhZEd8+jtqTpg@mail.gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
PCRE2 bug 2642 was fixed in version 10.36. Our 95ca1f987e (grep/pcre2:
better support invalid UTF-8 haystacks, 2021-01-24) worked around it on
older versions by setting the flag PCRE2_NO_START_OPTIMIZE. 797c359978
(grep/pcre2: use compile-time PCREv2 version test, 2021-02-18) switched
it around to set the flag on 10.36 and higher instead, while it claimed
to use "the same test done at compile-time".
Switch the condition back to apply the workaround on PCRE2 versions
_before_ 10.36.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GIT_FORCE_UNTRACKED_CACHE environment variable writes the untracked
cache more frequently than the core.untrackedCache config variable. This
is due to how read_directory() handles the creation of an untracked
cache.
Before this change, Git would not create the untracked cache extension
for an index that did not already have one. Users would need to run a
command such as 'git update-index --untracked-cache' before the index
would actually contain an untracked cache.
In particular, users noticed that the untracked cache would not appear
even with core.untrackedCache=true. Some users reported setting
GIT_FORCE_UNTRACKED_CACHE=1 in their engineering system environment to
ensure the untracked cache would be created.
The decision to not write the untracked cache without an environment
variable tracks back to fc9ecbeb9 (dir.c: don't flag the index as dirty
for changes to the untracked cache, 2018-02-05). The motivation of that
change is that writing the index is expensive, and if the untracked
cache is the only thing that needs to be written, then it is more
expensive than the benefit of the cache. However, this also means that
the untracked cache never gets populated, so the user who enabled it via
config does not actually get the extension until running 'git
update-index --untracked-cache' manually or using the environment
variable.
We have had a version of this change in the microsoft/git fork for a few
major releases now. It has been working well to get users into a good
state. Yes, that first index write is slow, but the remaining index
writes are much faster than they would be without this change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "struct option" added in 4a288478394 (diff.c: prepare to use
parse_options() for parsing, 2019-01-27) would be free'd in the case
of diff_setup_done() being called.
But not all codepaths that allocate it reach that,
e.g. "t6427-diff3-conflict-markers.sh" will now free memory that it
didn't free before. By using FREE_AND_NULL() here (which
diff_setup_done() also does) we ensure that we free the memory, and
that we won't have double-free's.
Before this running:
./t6427-diff3-conflict-markers.sh -vixd --run=7
Would report:
SUMMARY: LeakSanitizer: 7823 byte(s) leaked in 6 allocation(s).
But now we'll report:
SUMMARY: LeakSanitizer: 703 byte(s) leaked in 5 allocation(s).
I.e. the largest leak in that particular test has now been addressed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dcf (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d78 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak in the parse_date_format() function by providing a
new date_mode_release() companion function.
By using this in "t/helper/test-date.c" we can mark the
"t0006-date.sh" test as passing when git is compiled with
SANITIZE=leak, and whitelist it to run under
"GIT_TEST_PASSING_SANITIZE_LEAK=true" by adding
"TEST_PASSES_SANITIZE_LEAK=true" to the test itself.
The other tests that expose this memory leak (i.e. take the
"mode->type == DATE_STRFTIME" branch in parse_date_format()) are
"t6300-for-each-ref.sh" and "t7004-tag.sh". The former is due to an
easily fixed leak in "ref-filter.c", and brings the failures in
"t6300-for-each-ref.sh" down from 51 to 48.
Fixing the remaining leaks will have to wait until there's a
release_revisions() in "revision.c", as they have to do with leaks via
"struct rev_info".
There is also a leak in "builtin/blame.c" due to its call to
parse_date_format() to parse the "blame.date" configuration. However
as it declares a file-level "static struct date_mode blame_date_mode"
to track the data, LSAN will not report it as a leak. It's possible to
get valgrind(1) to complain about it with e.g.:
valgrind --leak-check=full --show-leak-kinds=all ./git -P -c blame.date=format:%Y blame README.md
But let's focus on things LSAN complains about, and are thus
observable with "TEST_PASSES_SANITIZE_LEAK=true". We should get to
fixing memory leaks in "builtin/blame.c", but as doing so would
require some re-arrangement of cmd_blame() let's leave it for some
other time.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add basic API doc comments to date.h, and while doing so move the the
parse_date_format() function adjacent to show_date(). This way all the
"struct date_mode" functions are grouped together. Documenting the
rest is one of our #leftoverbits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide and use a DATE_MODE_INIT macro. Most of the users of struct
date_mode" use it via pretty.h's "struct pretty_print_context" which
doesn't have an initialization macro, so we're still bound to being
initialized to "{ 0 }" by default.
But we can change the couple of callers that directly declared a
variable on the stack to instead use the initializer, and thus do away
with the "mode.local = 0" added in add00ba2de9 (date: make "local"
orthogonal to date format, 2015-09-03).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the declaration of the date.c functions from cache.h, and adjust
the relevant users to include the new date.h header.
The show_ident_date() function belonged in pretty.h (it's defined in
pretty.c), its two users outside of pretty.c didn't strictly need to
include pretty.h, as they get it indirectly, but let's add it to them
anyway.
Similarly, the change to "builtin/{fast-import,show-branch,tag}.c"
isn't needed as far as the compiler is concerned, but since they all
use the "DATE_MODE()" macro we now define in date.h, let's have them
include it.
We could simply include this new header in "cache.h", but as this
change shows these functions weren't common enough to warrant
including in it in the first place. By moving them out of cache.h
changes to this API will no longer cause a (mostly) full re-build of
the project when "make" is run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There has never been a show_date_human() function on the "master"
branch in git.git. This declaration was added in b841d4ff438 (Add
`human` format to test-tool, 2019-01-28).
A look at the ML history reveals that it was leftover cruft from an
earlier version of that commit[1].
1. https://lore.kernel.org/git/20190118061805.19086-5-ischis2@cox.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify the parsing of "grep.patternType" and
"grep.extendedRegexp". This changes no behavior, but gets rid of
complex parsing logic that isn't needed anymore.
When "grep.patternType" was introduced in 84befcd0a4a (grep: add a
grep.patternType configuration setting, 2012-08-03) we promised that:
1. You can set "grep.patternType", and "[setting it to] 'default'
will return to the default matching behavior".
In that context "the default" meant whatever the configuration
system specified before that change, i.e. via grep.extendedRegexp.
2. We'd support the existing "grep.extendedRegexp" option, but ignore
it when the new "grep.patternType" option is set. We said we'd
only ignore the older "grep.extendedRegexp" option "when the
`grep.patternType` option is set to a value other than
'default'".
In a preceding commit we changed grep_config() to be called after
grep_init(), which means that much of the complexity here can go
away.
As before both "grep.patternType" and "grep.extendedRegexp" are
last-one-wins variable, with "grep.extendedRegexp" yielding to
"grep.patternType", except when "grep.patternType=default".
Note that as the previously added tests indicate this cannot be done
on-the-fly as we see the config variables, without introducing more
state keeping. I.e. if we see:
-c grep.extendedRegexp=false
-c grep.patternType=default
-c extendedRegexp=true
We need to select ERE, since grep.patternType=default unselects that
variable, which normally has higher precedence, but we also need to
select BRE in cases of:
-c grep.extendedRegexp=true \
-c grep.extendedRegexp=false
Which would not be the case for this, which select ERE:
-c grep.patternType=extended \
-c grep.extendedRegexp=false
Therefore we cannot do this on-the-fly in grep_config without also
introducing tracking variables for not only the pattern type, but what
the source of that pattern type was.
So we need to decide on the pattern after our config was fully
parsed. Let's do that by deferring the decision on the pattern type
until it's time to compile it in compile_regexp().
By that time we've not only parsed the config, but also handled the
command-line options. Those will set "opt.pattern_type_option" (*not*
"opt.extended_regexp_option"!).
At that point all we need to do is see if "grep.patternType" was
UNSPECIFIED in the end (including an explicit "=default"), if so we'll
use the "grep.extendedRegexp" configuration, if any.
See my 07a3d411739 (grep: remove regflags from the public grep_opt
API, 2017-06-29) for addition of the two comments being removed here,
i.e. the complexity noted in that commit is now going away.
1. https://lore.kernel.org/git/patch-v8-09.10-c211bb0c69d-20220118T155211Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code in compile_regexp() to check the cheaper boolean
"!opt->pcre2" condition before the "memchr()" search.
This doesn't noticeably optimize anything, but makes the code more
obvious and conventional. The line wrapping being added here also
makes a subsequent commit smaller.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "pattern_type_option" member of "struct grep_opt" to use
the enum type we use for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The grep_init() function used the odd pattern of initializing the
passed-in "struct grep_opt" with a statically defined "grep_defaults"
struct, which would be modified in-place when we invoked
grep_config().
So we effectively (b) initialized config, (a) then defaults, (c)
followed by user options. Usually those are ordered as "a", "b" and
"c" instead.
As the comments being removed here show the previous behavior needed
to be carefully explained as we'd potentially share the populated
configuration among different instances of grep_init(). In practice we
didn't do that, but now that it can't be a concern anymore let's
remove those comments.
This does not change the behavior of any of the configuration
variables or options. That would have been the case if we didn't move
around the grep_config() call in "builtin/log.c". But now that we call
"grep_config" after "git_log_config" and "git_format_config" we'll
need to pass in the already initialized "struct grep_opt *".
See 6ba9bb76e02 (grep: copy struct in one fell swoop, 2020-11-29) and
7687a0541e0 (grep: move the configuration parsing logic to grep.[ch],
2012-10-09) for the commits that added the comments.
The memcpy() pattern here will be optimized away and follows the
convention of other *_init() functions. See 5726a6b4012 (*.c *_init():
define in terms of corresponding *_INIT macro, 2021-07-01).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change grep_cmd_config() to stop passing around the always-NULL "cb"
value. When this code was added in 7e8f59d577e (grep: color patterns
in output, 2009-03-07) it was non-NULL, but when that changed in
15fabd1bbd4 (builtin/grep.c: make configuration callback more
reusable, 2012-10-09) this code was left behind.
In a subsequent change I'll start using the "cb" value, this will make
it clear which functions we call need it, and which don't.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code in "builtin/grep.c" and "builtin/ls-tree.c" to trust the
"prefix" passed from "run_builtin()". The "prefix" we get from setup.c
is either going to be NULL or a string of length >0, never "".
So we can drop the "prefix && *prefix" checks added for
"builtin/grep.c" in 0d042fecf2f (git-grep: show pathnames relative to
the current directory, 2006-08-11), and for "builtin/ls-tree.c" in
a69dd585fca (ls-tree: chomp leading directories when run from a
subdirectory, 2005-12-23).
As seen in code in revision.c that was added in cd676a51367 (diff
--relative: output paths as relative to the current subdirectory,
2008-02-12) we already have existing code that does away with this
assertion.
This makes it easier to reason about a subsequent change to the
"prefix_length" code in grep.c in a subsequent commit, and since we're
going to the trouble of doing that let's leave behind an assert() to
promise this to any future callers.
For "builtin/grep.c" it would be painful to pass the "prefix" down the
callchain of:
cmd_grep -> grep_tree -> grep_submodule -> grep_cache -> grep_oid ->
grep_source_name
So for the code that needs it in grep_source_name() let's add a
"grep_prefix" variable similar to the existing "ls_tree_prefix".
While at it let's move the code in cmd_ls_tree() around so that we
assign to the "ls_tree_prefix" right after declaring the variables,
and stop assigning to "prefix". We only subsequently used that
variable later in the function after clobbering it. Let's just use our
own "grep_prefix" instead.
Let's also add an assert() in git.c, so that we'll make this promise
about the "prefix" to any current and future callers, as well as to
any readers of the code.
Code history:
* The strlen() in "grep.c" hasn't been used since 493b7a08d80 (grep:
accept relative paths outside current working directory, 2009-09-05).
When that code was added in 0d042fecf2f (git-grep: show pathnames
relative to the current directory, 2006-08-11) we used the length.
But since 493b7a08d80 we haven't used it for anything except a
boolean check that we could have done on the "prefix" member
itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the grep tests to assert that setting
"grep.patternType=extended" followed by "grep.patternType=default"
will behave as if "--basic-regexp" was provided, and not as
"--extended-regexp". In a subsequent commit we'll need to treat
"grep.patternType=default" as a special-case, but let's make sure we
ignore it if it's being set to "default" following an earlier
non-"default" "grep.patternType" setting.
Let's also test what happens when we have a sequence of "extended"
followed by "default" and "fixed". In that case the "fixed" should
prevail, as well as tests to check that a "grep.extendedRegexp=true"
followed by a "grep.extendedRegexp=false" behaves as though
"grep.extendedRegexp" wasn't provided.
See [1] for the source of some of these tests, and their
initial (pseudocode) implementation, and [2] for a later discussion
about a breakage due to missing testing (which had been noted in [1]
all along).
1. https://lore.kernel.org/git/xmqqv8zf6j86.fsf@gitster.g/
2. https://lore.kernel.org/git/xmqqpmoczwtu.fsf@gitster.g/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the repeated test code for finding out whether a given set of
configuration will pick basic, extended or fixed into a new
"test_pattern_type" helper function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend the tests added in my 9df46763ef1 (log: add exhaustive tests
for pattern style options & config, 2017-05-20) to check not only
whether "git log" handles "grep.patternType", but also "git show"
etc.
It's sufficient to check whether we match a "fixed" or a "basic" regex
here to see if these codepaths correctly invoked grep_config(). We
don't need to check the details of their regular expression matching
as the "log" test does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This "regex_t" in grep_opt has not been used since
f9b9faf6f8a (builtin-grep: allow more than one patterns., 2006-05-02),
we still use a "regex_t" for compiling regexes, but that's in the
"grep_pat" struct".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
34ae3b70 (name-rev: deprecate --stdin in favor of --annotate-stdin,
2022-01-05) added --annotate-stdin to replace --stdin as a clearer
flag name. Since --stdin is to be deprecated, we should replace
--stdin in the output from "git name-rev -h".
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stolee transitioned from Microsoft to GitHub in July 2020, but continued
to use <dstolee@microsoft.com> because it was a valid address. He also
used <stolee@gmail.com> to communicate with the mailing list since
writing plaintext emails is difficult in Outlook. However, recent issues
with GMail delaying mailing list messages created a need to change his
primary email address.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `eol` takes effect on text files only when the index has the
contents in LF line endings. Paths with contents in CRLF line
endings in the index may become dirty unless text=auto.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The protocol keyword 'ready' isn't meant for translation. Pass it as
parameter instead of spell it in die() message (and potentially confuse
translators).
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's useful to be able to countermand a previous --graph option, for
example if `git log --graph` is run via an alias.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When updating references via git-fetch(1), then by default we report to
the user which references have been changed. This output is formatted in
a nice table such that the different columns are aligned. Because the
first column contains abbreviated object IDs we thus need to iterate
over all refs which have changed and compute the minimum length for
their respective abbreviated hashes. While this effort makes sense in
most cases, it is wasteful when the user passes the `--quiet` flag: we
don't print the summary, but still compute the length.
Skip computing the summary width when the user asked for us to be quiet.
This gives us a speedup of nearly 10% when doing a mirror-fetch in a
repository with thousands of references being updated:
Benchmark 1: git fetch --quiet +refs/*:refs/* (HEAD~)
Time (mean ± σ): 96.078 s ± 0.508 s [User: 91.378 s, System: 10.870 s]
Range (min … max): 95.449 s … 96.760 s 5 runs
Benchmark 2: git fetch --quiet +refs/*:refs/* (HEAD)
Time (mean ± σ): 88.214 s ± 0.192 s [User: 83.274 s, System: 10.978 s]
Range (min … max): 87.998 s … 88.446 s 5 runs
Summary
'git fetch --quiet +refs/*:refs/* (HEAD)' ran
1.09 ± 0.01 times faster than 'git fetch --quiet +refs/*:refs/* (HEAD~)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During packfile negotiation we iterate over all refs announced by the
remote side to check whether their IDs refer to commits already known to
us. If a commit is known to us already, then its date is a potential
cutoff point for commits we have in common with the remote side.
There is potentially a lot of commits announced by the remote depending
on how many refs there are in the remote repository, and for every one
of them we need to search for it in our object database and, if found,
parse the corresponding object to find out whether it is a candidate for
the cutoff date. This can be sped up by trying to look up commits via
the commit-graph first, which is a lot more efficient.
Benchmarks in a repository with about 2,1 million refs and an up-to-date
commit-graph show an almost 20% speedup when mirror-fetching:
Benchmark 1: git fetch +refs/*:refs/* (v2.35.0)
Time (mean ± σ): 115.587 s ± 2.009 s [User: 109.874 s, System: 11.305 s]
Range (min … max): 113.584 s … 118.820 s 5 runs
Benchmark 2: git fetch +refs/*:refs/* (HEAD)
Time (mean ± σ): 96.859 s ± 0.624 s [User: 91.948 s, System: 10.980 s]
Range (min … max): 96.180 s … 97.875 s 5 runs
Summary
'git fetch +refs/*:refs/* (HEAD)' ran
1.19 ± 0.02 times faster than 'git fetch +refs/*:refs/* (v2.35.0)'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test fiddles with files under .git/logs to recreate a condition
that is unlikely to warrant special attention under reftable, as
reflog blocks are zlib compressed.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes the test compatible with reftable (it doesn't pass yet for
other reasons, unfortunately)
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have description on "per worktree ref", but "worktree" is not
described in the glossary. We do have "working tree", though.
Casually put, a "working tree" is what your editor and compiler
interacts with. "worktree" is a mechanism to allow one or more
"working tree"s to be attached to a repository and used to check out
different commits and branches independently, which includes not
just a "working tree" but also repository metadata like HEAD, the
index to support simultaneous use of them. Historically, we used
these terms interchangeably but we have been trying to use "working
tree" when we mean it, instead of "worktree".
Most of the existing references to "working tree" in the glossary do
refer primarily to the working tree portion, except for one that
said refs like HEAD and refs/bisect/* are per "working tree", but it
is more precise to say they are per "worktree".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `|` at line end already imples that the statement is not over.
So a `\` after that is redundant.
Signed-off-by: Jaydeep P Das <jaydeepjd.8914@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repo with a --filter and with --recurse-submodules
enabled, the partial clone filter only applies to the top-level repo.
This can lead to unexpected bandwidth and disk usage for projects which
include large submodules. For example, a user might wish to make a
partial clone of Gerrit and would run:
`git clone --recurse-submodules --filter=blob:5k https://gerrit.googlesource.com/gerrit`.
However, only the superproject would be a partial clone; all the
submodules would have all blobs downloaded regardless of their size.
With this change, the same filter can also be applied to submodules,
meaning the expected bandwidth and disk savings apply consistently.
To avoid changing default behavior, add a new clone flag,
`--also-filter-submodules`. When this is set along with `--filter` and
`--recurse-submodules`, the filter spec is passed along to git-submodule
and git-submodule--helper, such that submodule clones also have the
filter applied.
This applies the same filter to the superproject and all submodules.
Users who need to customize the filter per-submodule would need to clone
with `--no-recurse-submodules` and then manually initialize each
submodule with the proper filter.
Applying filters to submodules should be safe thanks to Jonathan Tan's
recent work [1, 2, 3] eliminating the use of alternates as a method of
accessing submodule objects, so any submodule object access now triggers
a lazy fetch from the submodule's promisor remote if the accessed object
is missing. This patch is a reworked version of [4], which was created
prior to Jonathan Tan's work.
[1]: 8721e2e (Merge branch 'jt/partial-clone-submodule-1', 2021-07-16)
[2]: 11e5d0a (Merge branch 'jt/grep-wo-submodule-odb-as-alternate',
2021-09-20)
[3]: 162a13b (Merge branch 'jt/no-abuse-alternate-odb-for-submodules',
2021-10-25)
[4]: https://lore.kernel.org/git/52bf9d45b8e2b72ff32aa773f2415bf7b2b86da2.1563322192.git.steadmon@google.com/
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the __gitcomp_directories method to de-quote and handle unusual
characters in directory names. Although this initially involved an attempt
to re-use the logic in __git_index_files, this method removed
subdirectories (e.g. folder1/0/ became folder1/), so instead new custom
logic was placed directly in the __gitcomp_directories method.
Note there are two tests for this new functionality - one for spaces and
accents and one for backslashes and tabs. The backslashes and tabs test
uses FUNNYNAMES to avoid running on Windows. This is because:
1. Backslashes are explicitly not allowed in Windows file paths.
2. Although tabs appear to be allowed when creating a file in a Windows
bash shell, they actually are not renderable (and appear as empty boxes
in the shell).
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use new __gitcomp_directories method to complete directory names in cone
mode sparse-checkouts. This method addresses the caveat of poor
performance in monorepos from the previous commit (by completing only one
level of directories).
The unusual character caveat from the previous commit will be fixed by the
final commit in this series.
Co-authored-by: Elijah Newren <newren@gmail.com>
Co-authored-by: Lessley Dennington <lessleydennington@gmail.com>
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct multiple issues with tab completion of the git sparse-checkout
command. These issues were:
1. git sparse-checkout <TAB> previously resulted in an incomplete list of
subcommands (it was missing reapply and add).
2. Subcommand options were not tab-completable.
3. git sparse-checkout set <TAB> and git sparse-checkout add <TAB> showed
both file names and directory names. While this may be a less surprising
behavior for non-cone mode, cone mode sparse checkouts should complete
only directory names.
Note that while the new strategy of just using git ls-tree to complete on
directory names is simple and a step in the right direction, it does have
some caveats. These are:
1. Likelihood of poor performance in large monorepos (as a result of
recursively completing directory names).
2. Inability to handle paths containing unusual characters.
These caveats will be fixed by subsequent commits in this series.
Signed-off-by: Lessley Dennington <lessleydennington@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We just fixed a class of recently introduced bugs where calling, say,
`git fetch -h` outside a repository would not show the usage but instead
show an ugly `BUG` message.
Let's verify that this does not regress anymore.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we taught these commands about the sparse index, we did not account
for the fact that the `cmd_*()` functions _can_ be called without a
gitdir, namely when `-h` is passed to show the usage.
A plausible approach to address this is to move the
`prepare_repo_settings()` calls right after the `parse_options()` calls:
The latter will never return when it handles `-h`, and therefore it is
safe to assume that we have a `gitdir` at that point, as long as the
built-in is marked with the `RUN_SETUP` flag.
However, it is unfortunately not that simple. In `cmd_pack_objects()`,
for example, the repo settings need to be fully populated so that the
command-line options `--sparse`/`--no-sparse` can override them, not the
other way round.
Therefore, we choose to imitate the strategy taken in `cmd_diff()`,
where we simply do not bother to prepare and initialize the repo
settings unless we have a `gitdir`.
This fixes https://github.com/git-for-windows/git/issues/3688
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This method was created in f1de981e8 (config: fix leaks from
git_config_get_string_const(), 2020-08-14) but its only use was in the
repo_config_get_string_tmp() method, also declared in config.h and
implemented in config.c. Since this is otherwise unused and is a very
similar implementation to git_configset_get_value(), let's remove this
declaration.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
