| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make it possible for any of the git-bundle subcommands to include
options:
- before the sub-command
- after the sub-command, before the bundle filename
There is an immediate gain in support for help with all of the
sub-commands, where 'git bundle list-heads -h' previously returned an
error.
Downside here is an increase in code duplication that cannot be
trivially avoided short of shared global static options.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Translate 36 new messages (4694t0f0u) for git 2.24.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
When calling `git stash` while changes were staged for files that are
marked with the `skip-worktree` bit (e.g. files that are excluded in a
sparse checkout), the files are recorded as _deleted_ instead.
The reason is that `git stash` tries to construct the tree reflecting
the worktree essentially by copying the index to a temporary one and
then updating the files from the worktree. Crucially, it calls `git
diff-index` to update also those files that are in the HEAD but have
been unstaged in the index.
However, when the temporary index is updated via `git update-index --add
--remove`, skip-worktree entries mark the files as deleted by mistake.
Let's use the newly-introduced `--ignore-skip-worktree-entries` option
of `git update-index` to prevent exactly this from happening.
Note that the regression test case deliberately avoids replicating the
scenario described above and instead tries to recreate just the symptom.
Reported by Dan Thompson.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While `git update-index` mostly ignores paths referring to index entries
whose skip-worktree bit is set, in b4d1690df11 (Teach Git to respect
skip-worktree bit (reading part), 2009-08-20), for reasons that are not
entirely obvious, the `--remove` option was made special: it _does_
remove index entries even if their skip-worktree bit is set.
Seeing as this behavior has been in place for a decade now, it does not
make sense to change it.
However, in preparation for fixing a bug in `git stash` where it
pretends that skip-worktree entries have actually been removed, we need
a mode where `git update-index` leaves all skip-worktree entries alone,
even if the `--remove` option was passed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As per Wikipedia, "In current technical usage, for one to state that a
feature is deprecated is merely a recommendation against using it." It
is thus contradictory to claim that something is not "officially
deprecated" and then to immediately state that we are both discouraging
its use and pointing people elsewhere.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We recently regressed our rendering with Asciidoctor of "literal"
elements in our manpages, i.e, stuff we have placed within `backticks`
in order to render as monospace. In particular, we lost the bold
rendering of such literal text.
The culprit is f6461b82b9 ("Documentation: fix build with Asciidoctor 2",
2019-09-15), where we switched from DocBook 4.5 to DocBook 5 with
Asciidoctor. As part of the switch, we started using the namespaced
DocBook XSLT stylesheets rather than the non-namespaced ones. (See
f6461b82b9 for more details on why we changed to the namespaced ones.)
The bold literals are implemented as an XSLT snippet <xsl:template
match="literal">...</xsl:template>. Now that we use namespaces, this
doesn't pick up our literals like it used to.
Match for "d:literal" in addition to just "literal", after defining the
d namespace. ("d" is what
http://docbook.sourceforge.net/release/xsl-ns/current/manpages/docbook.xsl
uses.) Note that we need to keep matching without the namespace for
AsciiDoc.
This boldness was introduced by 5121a6d993 ("Documentation: option to
render literal text as bold for manpages", 2009-03-27) and made the
default in 5945717009 ("Documentation: bold literals in man",
2016-05-31).
One reason this was not caught in review is that our doc-diff tool diffs
without any boldness, i.e., it "only" compares text. As pointed out by
Peff in review of this patch, one can use `MAN_KEEP_FORMATTING=1
./doc-diff <...>`
This has been optically tested with AsciiDoc 8.6.10, Asciidoctor 1.5.5
and Asciidoctor 2.0.10. I've also verified that doc-diff produces the
empty output for all three programs, as expected, and that with the
MAN_KEEP_FORMATTING trick, AsciiDoc yields no diff, whereas with
Asciidoctor, we get bold literals, just like we want.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Reviewed-by: Phillip Szelat <phillip.szelat@gmail.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The comments for the staging/unstaging test did not accurately
describe the scenario being tested. It is not essential that
the test files being staged/unstaged appear at the end of the
index. All that is required is that the test files are not
flagged with CE_FSMONITOR_VALID and have a position in the
index greater than the number of entries in the index after
unstaging.
The comment for this test has been updated to be more
accurate with respect to the scenario that's being tested.
Signed-off-by: William Baker <William.Baker@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In many projects the number of contributors is low enough that users know
each other and the full email address doesn't need to be displayed.
Displaying only the author's username saves a lot of columns on the screen.
Existing 'e/E' (as in "%ae" and "%aE") placeholders would show the
author's address as "prarit@redhat.com", which would waste columns to show
the same domain-part for all contributors when used in a project internal
to redhat. Introduce 'l/L' placeholders that strip '@' and domain part from
the e-mail address.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Generate po/git.pot from v2.24.0-rc1 for git v2.24.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
When this function is passed a path with a trailing slash, it runs right
over the end of that path.
Let's fix this.
Co-authored-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The first line in 'git commit-graph's usage string indicates that this
command can be invoked without specifying a subcommand. However, this
is not the case:
$ git commit-graph
usage: git commit-graph [--object-dir <objdir>]
or: git commit-graph read [--object-dir <objdir>]
[...]
$ echo $?
129
Remove this line from the usage string.
The synopsis in the manpage doesn't contain this line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace a hard-coded all-zeros object ID with a use of $ZERO_OID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test produces pseudo-collisions and tests git diff's behavior with
them, and is therefore sensitive to the hash in use. Update the test to
compute the collisions for both SHA-1 and SHA-256 using appropriate
constants. Move the heredocs inside the setup block so that all of the
setup code can be tested for failure.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Compute several object IDs that exist in expected output, since we don't
care about the specific object IDs, only that the format of the output
is syntactically correct.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Move some expected result heredocs around so
that they can use computed variables.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of hard-coding the length of an object ID, look this value up
using the translation tables. Similarly, compute input data for invalid
submodule entries using the tables as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test passes successfully with SHA-256, so remove the annotation
which limits it to SHA-1.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A repository using a hash other than SHA-1 will need to have an
extension in the config file. Ignore any extensions when comparing
config files, since they don't usefully contribute to the goal of the
test.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add an option to print the object format used for input, output, or
storage. This allows shell scripts to discover the hash algorithm in
use.
Since the transition plan allows for multiple input algorithms, document
that we may provide multiple results for input, and the format that the
results may take. While we don't support this now, documenting it early
means that script authors can future-proof their scripts for when we do.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this change, the setting
$feature{'javascript-actions'}{'default'} = [1];
in gitweb.conf breaks gitweb's blame page: clicking on line numbers
displayed in the second column on the page has no effect.
For comparison, with javascript-actions disabled, clicking on line
numbers loads the previous version of the line.
Addresses https://bugs.debian.org/741883.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Robert Luberda <robert@debian.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use name and email definitions from test-lib.sh.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use name and email definitions from test-lib.sh.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit includes a failing test for an issue around
fetch.writeCommitGraph and fetching in a repo with a submodule. Here, we
fix that bug and set the test to "test_expect_success".
The problem arises with this set of commands when the remote repo at
<url> has a submodule. Note that --recurse-submodules is not needed to
demonstrate the bug.
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
As an initial fix, I converted the code in builtin/fetch.c that calls
write_commit_graph_reachable() to instead launch a "git commit-graph
write --reachable --split" process. That code worked, but is not how we
want the feature to work long-term.
That test did demonstrate that the issue must be something to do with
internal state of the 'git fetch' process.
The write_commit_graph() method in commit-graph.c ensures the commits we
plan to write are "closed under reachability" using close_reachable().
This method walks from the input commits, and uses the UNINTERESTING
flag to mark which commits have already been visited. This allows the
walk to take O(N) time, where N is the number of commits, instead of
O(P) time, where P is the number of paths. (The number of paths can be
exponential in the number of commits.)
However, the UNINTERESTING flag is used in lots of places in the
codebase. This flag usually means some barrier to stop a commit walk,
such as in revision-walking to compare histories. It is not often
cleared after the walk completes because the starting points of those
walks do not have the UNINTERESTING flag, and clear_commit_marks() would
stop immediately.
This is happening during a 'git fetch' call with a remote. The fetch
negotiation is comparing the remote refs with the local refs and marking
some commits as UNINTERESTING.
I tested running clear_commit_marks_many() to clear the UNINTERESTING
flag inside close_reachable(), but the tips did not have the flag, so
that did nothing.
It turns out that the calculate_changed_submodule_paths() method is at
fault. Thanks, Peff, for pointing out this detail! More specifically,
for each submodule, the collect_changed_submodules() runs a revision
walk to essentially do file-history on the list of submodules. That
revision walk marks commits UNININTERESTING if they are simplified away
by not changing the submodule.
Instead, I finally arrived on the conclusion that I should use a flag
that is not used in any other part of the code. In commit-reach.c, a
number of flags were defined for commit walk algorithms. The REACHABLE
flag seemed like it made the most sense, and it seems it was not
actually used in the file. The REACHABLE flag was used in early versions
of commit-reach.c, but was removed by 4fbcca4 (commit-reach: make
can_all_from_reach... linear, 2018-07-20).
Add the REACHABLE flag to commit-graph.c and use it instead of
UNINTERESTING in close_reachable(). This fixes the bug in manual
testing.
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While dogfooding, Johannes found a bug in the fetch.writeCommitGraph
config behavior. His example initially happened during a clone with
--recurse-submodules, we found that this happens with the first fetch
after cloning a repository that contains a submodule:
$ git clone <url> test
$ cd test
$ git -c fetch.writeCommitGraph=true fetch origin
Computing commit graph generation numbers: 100% (12/12), done.
BUG: commit-graph.c:886: missing parent <hash1> for commit <hash2>
Aborted (core dumped)
In the repo I had cloned, there were really 60 commits to scan, but
only 12 were in the list to write when calling
compute_generation_numbers(). A commit in the list expects to see a
parent, but that parent is not in the list.
A follow-up will fix the bug, but first we create a test that
demonstrates the problem. This test must be careful about an existing
commit-graph file, since GIT_TEST_COMMIT_GRAPH=1 will cause the repo we
are cloning to already have one. This then prevents the incremtnal
commit-graph write during the first 'git fetch'.
Helped-by: Jeff King <peff@peff.net>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Szeder Gábor <szeder.dev@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove empty and redundant documentation files from the
Documentation/technical/ directory.
The empty doc files included only TODO messages with no documentation for
years. Instead an approach is being taken to keep all doc beside the code
in the relevant header files.
Having empty doc files is confusing and disappointing to anybody looking
for information, besides having the documentation in header files makes it
easier for developers to find the information they are looking for.
Some of the content which could have gone here already exists elsewhere:
- api-object-access.txt -> sha1-file.c and object.h have some details.
- api-quote.txt -> quote.h has some details.
- api-xdiff-interface.txt -> xdiff-interface.h has some details.
- api-grep.txt -> grep.h does not have enough documentation at the moment.
Signed-off-by: Heba Waly <heba.waly@gmail.com>
Reviewed-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Suppose, from a repository that has ".gitmodules", we clone with
--filter=blob:none:
git clone --filter=blob:none --no-checkout \
https://kernel.googlesource.com/pub/scm/git/git
Then we fetch:
git -C git fetch
This will cause a "unable to load config blob object", because the
fetch_config_from_gitmodules() invocation in cmd_fetch() will attempt to
load ".gitmodules" (which Git knows to exist because the client has the
tree of HEAD) while fetch_if_missing is set to 0.
fetch_if_missing is set to 0 too early - ".gitmodules" here should be
lazily fetched. Git must set fetch_if_missing to 0 before the fetch
because as part of the fetch, packfile negotiation happens (and we do
not want to fetch any missing objects when checking existence of
objects), but we do not need to set it so early. Move the setting of
fetch_if_missing to the earliest possible point in cmd_fetch(), right
before any fetching happens.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several config options were combined into a repo_settings struct in
ds/feature-macros, including a move of the "index.version" config
setting in 7211b9e (repo-settings: consolidate some config settings,
2019-08-13).
Unfortunately, that file looked like a lot of boilerplate and what is
clearly a factor of copy-paste overload, the config setting is parsed
with repo_config_ge_bool() instead of repo_config_get_int(). This means
that a setting "index.version=4" would not register correctly and would
revert to the default version of 3.
I caught this while incorporating v2.24.0-rc0 into the VFS for Git
codebase, where we really care that the index is in version 4.
This was not caught by the codebase because the version checks placed
in t1600-index.sh did not test the "basic" scenario enough. Here, we
modify the test to include these normal settings to not be overridden by
features.manyFiles or GIT_INDEX_VERSION. While the "default" version is
3, this is demoted to version 2 in do_write_index() when not necessary.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, when doing a 3-way merge, the merge.conflictStyle option was not
respected and the "merge" style was always used, even if "diff3" was
specified.
Call git_xmerge_config() at the end of git_apply_config() so that the
merge.conflictStyle config is read.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, apply does not respect the merge.conflictStyle setting.
Demonstrate this by making the 'apply with --3way' test case generic and
extending it to show that the configuration of
merge.conflictStyle = diff3 causes a breakage.
Change print_sanitized_conflicted_diff() to also sanitize `|||||||`
conflict markers.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since `git config` leaves the configurations set even after the test
case completes, use `test_config` instead so that the configurations are
reset once the test case finishes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, the output of `git diff HEAD` would always be piped to
sanitize_conflicted_diff(). However, since the Git command was upstream
of the pipe, in case the Git command fails, the return code would be
lost. Rewrite into separate statements so that the return code is no
longer lost.
Since only the command `git diff HEAD` was being piped to
sanitize_conflicted_diff(), move the command into the function and rename
it to print_sanitized_conflicted_diff().
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the locally defined create_file() duplicates the functionality of
the test_write_lines() helper function, remove create_file() and replace
all instances with test_write_lines(). While we're at it, move
redirection operators to the end of the command which is the more
conventional place to put it.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few days ago Travis CI updated their existing OSX images, including
the Homebrew database in the xcode10.1 OSX image that we use. Since
then installing dependencies in the 'osx-gcc' job fails when it tries
to link gcc@8:
+ brew link gcc@8
Error: No such keg: /usr/local/Cellar/gcc@8
GCC8 is still installed but not linked to '/usr/local' in the updated
image, as it was before this update, but now we have to link it by
running 'brew link gcc'. So let's do that then, and fall back to
linking gcc@8 if it doesn't, just to be sure.
Our builds on Azure Pipelines are unaffected by this issue. The OSX
image over there doesn't contain the gcc@8 package, so we have to
'brew install' it, which already takes care of linking it to
'/usr/local'. After that the 'brew link gcc' command added by this
patch fails, but the ||-chained fallback 'brew link gcc@8' command
succeeds with an "already linked" warning.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
