Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next

Martin KaFai Lau says:

====================
pull-request: bpf-next 2023-08-03

We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 84 files changed, 4026 insertions(+), 562 deletions(-).

The main changes are:

1) Add SO_REUSEPORT support for TC bpf_sk_assign from Lorenz Bauer,
   Daniel Borkmann

2) Support new insns from cpu v4 from Yonghong Song

3) Non-atomically allocate freelist during prefill from YiFei Zhu

4) Support defragmenting IPv(4|6) packets in BPF from Daniel Xu

5) Add tracepoint to xdp attaching failure from Leon Hwang

6) struct netdev_rx_queue and xdp.h reshuffling to reduce
   rebuild time from Jakub Kicinski

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
  net: invert the netdevice.h vs xdp.h dependency
  net: move struct netdev_rx_queue out of netdevice.h
  eth: add missing xdp.h includes in drivers
  selftests/bpf: Add testcase for xdp attaching failure tracepoint
  bpf, xdp: Add tracepoint to xdp attaching failure
  selftests/bpf: fix static assert compilation issue for test_cls_*.c
  bpf: fix bpf_probe_read_kernel prototype mismatch
  riscv, bpf: Adapt bpf trampoline to optimized riscv ftrace framework
  libbpf: fix typos in Makefile
  tracing: bpf: use struct trace_entry in struct syscall_tp_t
  bpf, devmap: Remove unused dtab field from bpf_dtab_netdev
  bpf, cpumap: Remove unused cmap field from bpf_cpu_map_entry
  netfilter: bpf: Only define get_proto_defrag_hook() if necessary
  bpf: Fix an array-index-out-of-bounds issue in disasm.c
  net: remove duplicate INDIRECT_CALLABLE_DECLARE of udp[6]_ehashfn
  docs/bpf: Fix malformed documentation
  bpf: selftests: Add defrag selftests
  bpf: selftests: Support custom type and proto for client sockets
  bpf: selftests: Support not connecting client socket
  netfilter: bpf: Support BPF_F_NETFILTER_IP_DEFRAG in netfilter link
  ...
====================

Link: https://lore.kernel.org/r/20230803174845.825419-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 93 insertions, 37 deletions

diff --git a/Documentation/bpf/standardization/instruction-set.rst b/Documentation/bpf/standardization/instruction-set.rst
index 751e657973f0..655494ac7af6 100644
--- a/Documentation/bpf/standardization/instruction-set.rst
+++ b/Documentation/bpf/standardization/instruction-set.rst
@@ -154,24 +154,27 @@ otherwise identical operations.
 The 'code' field encodes the operation as below, where 'src' and 'dst' refer
 to the values of the source and destination registers, respectively.
 
-========  =====  ==========================================================
-code      value  description
-========  =====  ==========================================================
-BPF_ADD   0x00   dst += src
-BPF_SUB   0x10   dst -= src
-BPF_MUL   0x20   dst \*= src
-BPF_DIV   0x30   dst = (src != 0) ? (dst / src) : 0
-BPF_OR    0x40   dst \|= src
-BPF_AND   0x50   dst &= src
-BPF_LSH   0x60   dst <<= (src & mask)
-BPF_RSH   0x70   dst >>= (src & mask)
-BPF_NEG   0x80   dst = -src
-BPF_MOD   0x90   dst = (src != 0) ? (dst % src) : dst
-BPF_XOR   0xa0   dst ^= src
-BPF_MOV   0xb0   dst = src
-BPF_ARSH  0xc0   sign extending dst >>= (src & mask)
-BPF_END   0xd0   byte swap operations (see `Byte swap instructions`_ below)
-========  =====  ==========================================================
+=========  =====  =======  ==========================================================
+code       value  offset   description
+=========  =====  =======  ==========================================================
+BPF_ADD    0x00   0        dst += src
+BPF_SUB    0x10   0        dst -= src
+BPF_MUL    0x20   0        dst \*= src
+BPF_DIV    0x30   0        dst = (src != 0) ? (dst / src) : 0
+BPF_SDIV   0x30   1        dst = (src != 0) ? (dst s/ src) : 0
+BPF_OR     0x40   0        dst \|= src
+BPF_AND    0x50   0        dst &= src
+BPF_LSH    0x60   0        dst <<= (src & mask)
+BPF_RSH    0x70   0        dst >>= (src & mask)
+BPF_NEG    0x80   0        dst = -dst
+BPF_MOD    0x90   0        dst = (src != 0) ? (dst % src) : dst
+BPF_SMOD   0x90   1        dst = (src != 0) ? (dst s% src) : dst
+BPF_XOR    0xa0   0        dst ^= src
+BPF_MOV    0xb0   0        dst = src
+BPF_MOVSX  0xb0   8/16/32  dst = (s8,s16,s32)src
+BPF_ARSH   0xc0   0        sign extending dst >>= (src & mask)
+BPF_END    0xd0   0        byte swap operations (see `Byte swap instructions`_ below)
+=========  =====  =======  ==========================================================
 
 Underflow and overflow are allowed during arithmetic operations, meaning
 the 64-bit or 32-bit value will wrap. If eBPF program execution would
@@ -198,33 +201,51 @@ where '(u32)' indicates that the upper 32 bits are zeroed.
 
   dst = dst ^ imm32
 
-Also note that the division and modulo operations are unsigned. Thus, for
-``BPF_ALU``, 'imm' is first interpreted as an unsigned 32-bit value, whereas
-for ``BPF_ALU64``, 'imm' is first sign extended to 64 bits and the result
-interpreted as an unsigned 64-bit value. There are no instructions for
-signed division or modulo.
+Note that most instructions have instruction offset of 0. Only three instructions
+(``BPF_SDIV``, ``BPF_SMOD``, ``BPF_MOVSX``) have a non-zero offset.
+
+The devision and modulo operations support both unsigned and signed flavors.
+
+For unsigned operations (``BPF_DIV`` and ``BPF_MOD``), for ``BPF_ALU``,
+'imm' is interpreted as a 32-bit unsigned value. For ``BPF_ALU64``,
+'imm' is first sign extended from 32 to 64 bits, and then interpreted as
+a 64-bit unsigned value.
+
+For signed operations (``BPF_SDIV`` and ``BPF_SMOD``), for ``BPF_ALU``,
+'imm' is interpreted as a 32-bit signed value. For ``BPF_ALU64``, 'imm'
+is first sign extended from 32 to 64 bits, and then interpreted as a
+64-bit signed value.
+
+The ``BPF_MOVSX`` instruction does a move operation with sign extension.
+``BPF_ALU | BPF_MOVSX`` sign extends 8-bit and 16-bit operands into 32
+bit operands, and zeroes the remaining upper 32 bits.
+``BPF_ALU64 | BPF_MOVSX`` sign extends 8-bit, 16-bit, and 32-bit
+operands into 64 bit operands.
 
 Shift operations use a mask of 0x3F (63) for 64-bit operations and 0x1F (31)
 for 32-bit operations.
 
 Byte swap instructions
-~~~~~~~~~~~~~~~~~~~~~~
+----------------------
 
-The byte swap instructions use an instruction class of ``BPF_ALU`` and a 4-bit
-'code' field of ``BPF_END``.
+The byte swap instructions use instruction classes of ``BPF_ALU`` and ``BPF_ALU64``
+and a 4-bit 'code' field of ``BPF_END``.
 
 The byte swap instructions operate on the destination register
 only and do not use a separate source register or immediate value.
 
-The 1-bit source operand field in the opcode is used to select what byte
-order the operation convert from or to:
+For ``BPF_ALU``, the 1-bit source operand field in the opcode is used to
+select what byte order the operation converts from or to. For
+``BPF_ALU64``, the 1-bit source operand field in the opcode is reserved
+and must be set to 0.
 
-=========  =====  =================================================
-source     value  description
-=========  =====  =================================================
-BPF_TO_LE  0x00   convert between host byte order and little endian
-BPF_TO_BE  0x08   convert between host byte order and big endian
-=========  =====  =================================================
+=========  =========  =====  =================================================
+class      source     value  description
+=========  =========  =====  =================================================
+BPF_ALU    BPF_TO_LE  0x00   convert between host byte order and little endian
+BPF_ALU    BPF_TO_BE  0x08   convert between host byte order and big endian
+BPF_ALU64  Reserved   0x00   do byte swap unconditionally
+=========  =========  =====  =================================================
 
 The 'imm' field encodes the width of the swap operations.  The following widths
 are supported: 16, 32 and 64.
@@ -239,6 +260,12 @@ Examples:
 
   dst = htobe64(dst)
 
+``BPF_ALU64 | BPF_TO_LE | BPF_END`` with imm = 16/32/64 means::
+
+  dst = bswap16 dst
+  dst = bswap32 dst
+  dst = bswap64 dst
+
 Jump instructions
 -----------------
 
@@ -249,7 +276,8 @@ The 'code' field encodes the operation as below:
 ========  =====  ===  ===========================================  =========================================
 code      value  src  description                                  notes
 ========  =====  ===  ===========================================  =========================================
-BPF_JA    0x0    0x0  PC += offset                                 BPF_JMP only
+BPF_JA    0x0    0x0  PC += offset                                 BPF_JMP class
+BPF_JA    0x0    0x0  PC += imm                                    BPF_JMP32 class
 BPF_JEQ   0x1    any  PC += offset if dst == src
 BPF_JGT   0x2    any  PC += offset if dst > src                    unsigned
 BPF_JGE   0x3    any  PC += offset if dst >= src                   unsigned
@@ -278,6 +306,19 @@ Example:
 
 where 's>=' indicates a signed '>=' comparison.
 
+``BPF_JA | BPF_K | BPF_JMP32`` (0x06) means::
+
+  gotol +imm
+
+where 'imm' means the branch offset comes from insn 'imm' field.
+
+Note that there are two flavors of ``BPF_JA`` instructions. The
+``BPF_JMP`` class permits a 16-bit jump offset specified by the 'offset'
+field, whereas the ``BPF_JMP32`` class permits a 32-bit jump offset
+specified by the 'imm' field. A > 16-bit conditional jump may be
+converted to a < 16-bit conditional jump plus a 32-bit unconditional
+jump.
+
 Helper functions
 ~~~~~~~~~~~~~~~~
 
@@ -320,6 +361,7 @@ The mode modifier is one of:
   BPF_ABS        0x20   legacy BPF packet access (absolute)   `Legacy BPF Packet access instructions`_
   BPF_IND        0x40   legacy BPF packet access (indirect)   `Legacy BPF Packet access instructions`_
   BPF_MEM        0x60   regular load and store operations     `Regular load and store operations`_
+  BPF_MEMSX      0x80   sign-extension load operations        `Sign-extension load operations`_
   BPF_ATOMIC     0xc0   atomic operations                     `Atomic operations`_
   =============  =====  ====================================  =============
 
@@ -350,9 +392,23 @@ instructions that transfer data between a register and memory.
 
 ``BPF_MEM | <size> | BPF_LDX`` means::
 
-  dst = *(size *) (src + offset)
+  dst = *(unsigned size *) (src + offset)
+
+Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW`` and
+'unsigned size' is one of u8, u16, u32 or u64.
+
+Sign-extension load operations
+------------------------------
+
+The ``BPF_MEMSX`` mode modifier is used to encode sign-extension load
+instructions that transfer data between a register and memory.
+
+``BPF_MEMSX | <size> | BPF_LDX`` means::
+
+  dst = *(signed size *) (src + offset)
 
-Where size is one of: ``BPF_B``, ``BPF_H``, ``BPF_W``, or ``BPF_DW``.
+Where size is one of: ``BPF_B``, ``BPF_H`` or ``BPF_W``, and
+'signed size' is one of s8, s16 or s32.
 
 Atomic operations
 -----------------