ARM: remove tango platform

The smp8758 (tango4) SoC was the last generation of set-top-box chips
to come out of Sigma Designs, and support was added by Marc Gonzalez
and Måns Rullgård between 2015 and 2017, before the company went out of
business and the products were abandoned.

The chip is used in some set-top-boxes such as the Popcorn Hour A-500,
which could have seen some adoption by hobbyists. This has not happened
in the past four years, and support for the more widely used MIPS based
SoCs was never merged at all.

Thanks to Marc and Måns for maintaining for the past years even after the
death of the platform.

Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/lkml/2d643ebc-09af-a809-eb3f-2aec8ecee501@free.fr/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 184 deletions

diff --git a/arch/arm/boot/dts/tango4-common.dtsi b/arch/arm/boot/dts/tango4-common.dtsi
deleted file mode 100644
index d584da314500..000000000000
--- a/arch/arm/boot/dts/tango4-common.dtsi
+++ /dev/null
@@ -1,184 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Based on Mans Rullgard's Tango3 DT
- * https://github.com/mansr/linux-tangox
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#define  CPU_CLK	0
-#define  SYS_CLK	1
-#define  USB_CLK	2
-#define SDIO_CLK	3
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	periph_clk: periph_clk {
-		compatible = "fixed-factor-clock";
-		clocks = <&clkgen CPU_CLK>;
-		clock-mult = <1>;
-		clock-div  = <2>;
-		#clock-cells = <0>;
-	};
-
-	mpcore {
-		compatible = "simple-bus";
-		ranges = <0x00000000 0x20000000 0x2000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		scu@0 {
-			compatible = "arm,cortex-a9-scu";
-			reg = <0x0 0x100>;
-		};
-
-		twd@600 {
-			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x600 0x10>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-			clocks = <&periph_clk>;
-			always-on;
-		};
-
-		gic: interrupt-controller@1000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x1000 0x1000>, <0x100 0x100>;
-		};
-	};
-
-	l2cc: cache-controller@20100000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x20100000 0x1000>;
-		cache-level = <2>;
-		cache-unified;
-	};
-
-	soc {
-		compatible = "simple-bus";
-		interrupt-parent = <&irq0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		xtal: xtal {
-			compatible = "fixed-clock";
-			clock-frequency = <27000000>;
-			#clock-cells = <0>;
-		};
-
-		clkgen: clkgen@10000 {
-			compatible = "sigma,tango4-clkgen";
-			reg = <0x10000 0x100>;
-			clocks = <&xtal>;
-			#clock-cells = <1>;
-		};
-
-		tick-counter@10048 {
-			compatible = "sigma,tick-counter";
-			reg = <0x10048 0x4>;
-			clocks = <&xtal>;
-		};
-
-		uart: serial@10700 {
-			compatible = "ralink,rt2880-uart", "ns16550a";
-			reg = <0x10700 0x30>;
-			interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <7372800>;
-			reg-shift = <2>;
-		};
-
-		watchdog@1fd00 {
-			compatible = "sigma,smp8759-wdt";
-			reg = <0x1fd00 8>;
-			clocks = <&xtal>;
-		};
-
-		mmc0: mmc@21000 {
-			compatible = "arasan,sdhci-8.9a";
-			reg = <0x21000 0x200>;
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
-			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		mmc1: mmc@21200 {
-			compatible = "arasan,sdhci-8.9a";
-			reg = <0x21200 0x200>;
-			clock-names = "clk_xin", "clk_ahb";
-			clocks = <&clkgen SDIO_CLK>, <&clkgen SYS_CLK>;
-			interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		usb0: usb@21400 {
-			compatible = "chipidea,usb2";
-			reg = <0x21400 0x200>;
-			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb0_phy>;
-			phy-names = "usb-phy";
-		};
-
-		usb0_phy: phy@21700 {
-			compatible = "sigma,smp8642-usb-phy";
-			reg = <0x21700 0x100>;
-			#phy-cells = <0>;
-			clocks = <&clkgen USB_CLK>;
-		};
-
-		usb1: usb@25400 {
-			compatible = "chipidea,usb2";
-			reg = <0x25400 0x200>;
-			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&usb1_phy>;
-			phy-names = "usb-phy";
-		};
-
-		usb1_phy: phy@25700 {
-			compatible = "sigma,smp8642-usb-phy";
-			reg = <0x25700 0x100>;
-			#phy-cells = <0>;
-			clocks = <&clkgen USB_CLK>;
-		};
-
-		eth0: ethernet@26000 {
-			compatible = "sigma,smp8734-ethernet";
-			reg = <0x26000 0x800>;
-			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clkgen SYS_CLK>;
-		};
-
-		intc: interrupt-controller@6e000 {
-			compatible = "sigma,smp8642-intc";
-			reg = <0x6e000 0x400>;
-			ranges = <0 0x6e000 0x400>;
-			interrupt-parent = <&gic>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			irq0: irq0@0 {
-				reg = <0x000 0x100>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			irq1: irq1@100 {
-				reg = <0x100 0x100>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			};
-
-			irq2: irq2@300 {
-				reg = <0x300 0x100>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			};
-		};
-	};
-};