diff options
| author | Dmitry Osipenko <digetx@gmail.com> | 2020-08-23 16:47:22 +0200 |
|---|---|---|
| committer | Thierry Reding <treding@nvidia.com> | 2020-09-17 18:09:38 +0200 |
| commit | eb885f5ef73b1716d34f872ca37ac0b1a6e8cf2e (patch) | |
| tree | 2ef249557c5afa91dce72dd08c75757840be6111 /arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | |
| parent | ARM: tegra: acer-a500: Remove atmel,cfg_name property (diff) | |
| download | linux-eb885f5ef73b1716d34f872ca37ac0b1a6e8cf2e.tar.xz linux-eb885f5ef73b1716d34f872ca37ac0b1a6e8cf2e.zip | |
ARM: tegra: acer-a500: Correct PINCTRL configuration
The low-power-mode drive was set to DIV_4 for some of PINCTRL groups,
while these groups should use DIV_1. This patch fixes the wrong PINCTRL
configurations and adds a full drive-setup for the changed configs, just
for completeness since the added values match the default configuration.
Now WiFi SDIO communication works properly using legacy signaling mode if
SDIO BUS clocked at 50MHz, which is a maximum SDIO clock rate on Tegra20.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'arch/arm/boot/dts/tegra20-acer-a500-picasso.dts')
| -rw-r--r-- | arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 12 |
1 files changed, 10 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index d380ae1f9437..bc7c1d082828 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -318,16 +318,24 @@ nvidia,pins = "drive_ddc", "drive_vi1", "drive_sdio1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; drive_dbg { nvidia,pins = "drive_dbg", "drive_vi2", "drive_at1", "drive_ao1"; + nvidia,pull-up-strength = <31>; + nvidia,pull-down-strength = <31>; nvidia,schmitt = <TEGRA_PIN_ENABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; |