Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc-specific updates from Olof Johansson:
 "Most notable here is probably the addition of basic support for the
  BCM2835, an SoC used in some of the Roku 2 players as well as the
  much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren.
  It's still early days on mainline support, with just the basics
  working.  But it has to start somewhere!

  Beyond that there's some conversions of clock infrastructure on tegra
  to common clock, misc updates for several other platforms, and OMAP
  now has its own bus (under drivers/bus) to manage its devices through.

  This branch adds two new directories outside of arch/arm:
  drivers/irqchip for new irq controllers, and drivers/bus for the above
  OMAP bus.  It's expected that some of the other platforms will migrate
  parts of their platforms to those directories over time as well."

Fix up trivial conflicts with the clk infrastructure changes.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits)
  ARM: shmobile: add new __iomem annotation for new code
  ARM: LPC32xx: Support GPI 28
  ARM: LPC32xx: Platform update for devicetree completion of spi-pl022
  ARM: LPC32xx: Board cleanup
  irqchip: fill in empty Kconfig
  ARM: SAMSUNG: Add check for NULL in clock interface
  ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state
  ARM: EXYNOS: Add bus clock for FIMD
  ARM: SAMSUNG: Fix HDMI related warnings
  ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock
  ARM: EXYNOS: Fix incorrect help text
  ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers
  ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move
  MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture
  ARM: bcm2835: instantiate console UART
  ARM: bcm2835: add stub clock driver
  ARM: bcm2835: add system timer
  ARM: bcm2835: add interrupt controller driver
  ARM: add infra-structure for BCM2835 and Raspberry Pi
  ARM: tegra20: add CPU hotplug support
  ...

1 files changed, 82 insertions, 0 deletions

diff --git a/arch/arm/mach-tegra/sleep-t20.S b/arch/arm/mach-tegra/sleep-t20.S
new file mode 100644
index 000000000000..a36ae413e2b8
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep-t20.S
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ *         Gary King <gking@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+#include <mach/iomap.h>
+
+#include "sleep.h"
+#include "flowctrl.h"
+
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
+/*
+ * tegra20_hotplug_shutdown(void)
+ *
+ * puts the current cpu in reset
+ * should never return
+ */
+ENTRY(tegra20_hotplug_shutdown)
+	/* Turn off SMP coherency */
+	exit_smp r4, r5
+
+	/* Put this CPU down */
+	cpu_id	r0
+	bl	tegra20_cpu_shutdown
+	mov	pc, lr			@ should never get here
+ENDPROC(tegra20_hotplug_shutdown)
+
+/*
+ * tegra20_cpu_shutdown(int cpu)
+ *
+ * r0 is cpu to reset
+ *
+ * puts the specified CPU in wait-for-event mode on the flow controller
+ * and puts the CPU in reset
+ * can be called on the current cpu or another cpu
+ * if called on the current cpu, does not return
+ * MUST NOT BE CALLED FOR CPU 0.
+ *
+ * corrupts r0-r3, r12
+ */
+ENTRY(tegra20_cpu_shutdown)
+	cmp	r0, #0
+	moveq	pc, lr			@ must not be called for CPU 0
+
+	cpu_to_halt_reg r1, r0
+	ldr	r3, =TEGRA_FLOW_CTRL_VIRT
+	mov	r2, #FLOW_CTRL_WAITEVENT | FLOW_CTRL_JTAG_RESUME
+	str	r2, [r3, r1]		@ put flow controller in wait event mode
+	ldr	r2, [r3, r1]
+	isb
+	dsb
+	movw	r1, 0x1011
+	mov	r1, r1, lsl r0
+	ldr	r3, =TEGRA_CLK_RESET_VIRT
+	str	r1, [r3, #0x340]	@ put slave CPU in reset
+	isb
+	dsb
+	cpu_id	r3
+	cmp	r3, r0
+	beq	.
+	mov	pc, lr
+ENDPROC(tegra20_cpu_shutdown)
+#endif