Merge commit 'origin/master' into for-linus/xen/master

* commit 'origin/master': (4825 commits)
  Fix build errors due to CONFIG_BRANCH_TRACER=y
  parport: Use the PCI IRQ if offered
  tty: jsm cleanups
  Adjust path to gpio headers
  KGDB_SERIAL_CONSOLE check for module
  Change KCONFIG name
  tty: Blackin CTS/RTS
  Change hardware flow control from poll to interrupt driven
  Add support for the MAX3100 SPI UART.
  lanana: assign a device name and numbering for MAX3100
  serqt: initial clean up pass for tty side
  tty: Use the generic RS485 ioctl on CRIS
  tty: Correct inline types for tty_driver_kref_get()
  splice: fix deadlock in splicing to file
  nilfs2: support nanosecond timestamp
  nilfs2: introduce secondary super block
  nilfs2: simplify handling of active state of segments
  nilfs2: mark minor flag for checkpoint created by internal operation
  nilfs2: clean up sketch file
  nilfs2: super block operations fix endian bug
  ...

Conflicts:
	arch/x86/include/asm/thread_info.h
	arch/x86/lguest/boot.c
	drivers/xen/manage.c

1 files changed, 75 insertions, 6 deletions

diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 556aeca0d860..9b60b6b684d9 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -31,6 +31,13 @@ config LEDS_LOCOMO
 	  This option enables support for the LEDs on Sharp Locomo.
 	  Zaurus models SL-5500 and SL-5600.
 
+config LEDS_MIKROTIK_RB532
+	tristate "LED Support for Mikrotik Routerboard 532"
+	depends on LEDS_CLASS && MIKROTIK_RB532
+	help
+	  This option enables support for the so called "User LED" of
+	  Mikrotik's Routerboard 532.
+
 config LEDS_S3C24XX
 	tristate "LED Support for Samsung S3C24XX GPIO LEDs"
 	depends on LEDS_CLASS && ARCH_S3C2410
@@ -100,7 +107,7 @@ config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
 	depends on LEDS_CLASS && SH_HP6XX
 	help
-	  This option enables led support for the handheld
+	  This option enables LED support for the handheld
 	  HP Jornada 620/660/680/690.
 
 config LEDS_PCA9532
@@ -108,7 +115,7 @@ config LEDS_PCA9532
 	depends on LEDS_CLASS && I2C && INPUT && EXPERIMENTAL
 	help
 	  This option enables support for NXP pca9532
-	  led controller. It is generally only usefull
+	  LED controller. It is generally only useful
 	  as a platform driver
 
 config LEDS_GPIO
@@ -117,11 +124,40 @@ config LEDS_GPIO
 	help
 	  This option enables support for the LEDs connected to GPIO
 	  outputs. To be useful the particular board must have LEDs
-	  and they must be connected to the GPIO lines.
+	  and they must be connected to the GPIO lines.  The LEDs must be
+	  defined as platform devices and/or OpenFirmware platform devices.
+	  The code to use these bindings can be selected below.
+
+config LEDS_GPIO_PLATFORM
+	bool "Platform device bindings for GPIO LEDs"
+	depends on LEDS_GPIO
+	default y
+	help
+	  Let the leds-gpio driver drive LEDs which have been defined as
+	  platform devices.  If you don't know what this means, say yes.
+
+config LEDS_GPIO_OF
+	bool "OpenFirmware platform device bindings for GPIO LEDs"
+	depends on LEDS_GPIO && OF_DEVICE
+	default y
+	help
+	  Let the leds-gpio driver drive LEDs which have been defined as
+	  of_platform devices.  For instance, LEDs which are listed in a "dts"
+	  file.
+
+config LEDS_LP5521
+	tristate "LED Support for the LP5521 LEDs"
+	depends on LEDS_CLASS && I2C
+	help
+	  If you say 'Y' here you get support for the National Semiconductor
+	  LP5521 LED driver used in n8x0 boards.
+
+	  This driver can be built as a module by choosing 'M'. The module
+	  will be called leds-lp5521.
 
 config LEDS_CLEVO_MAIL
-	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
-	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
+	tristate "Mail LED on Clevo notebook"
+	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI
 	help
 	  This driver makes the mail LED accessible from userspace
 	  programs through the leds subsystem. This LED have three
@@ -144,7 +180,7 @@ config LEDS_CLEVO_MAIL
 	  	Positivo Mobile (Clevo M5x0V)
 
 	  If your model is not listed here you can try the "nodetect"
-	  module paramter.
+	  module parameter.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-clevo-mail.
@@ -171,6 +207,26 @@ config LEDS_DA903X
 	  This option enables support for on-chip LED drivers found
 	  on Dialog Semiconductor DA9030/DA9034 PMICs.
 
+config LEDS_DAC124S085
+	tristate "LED Support for DAC124S085 SPI DAC"
+	depends on LEDS_CLASS && SPI
+	help
+	  This option enables support for DAC124S085 SPI DAC from NatSemi,
+	  which can be used to control up to four LEDs.
+
+config LEDS_PWM
+	tristate "PWM driven LED Support"
+	depends on LEDS_CLASS && HAVE_PWM
+	help
+	  This option enables support for pwm driven LEDs
+
+config LEDS_BD2802
+	tristate "LED driver for BD2802 RGB LED"
+	depends on LEDS_CLASS && I2C
+	help
+	  This option enables support for BD2802GU RGB LED driver chips
+	  accessed via the I2C bus.
+
 comment "LED Triggers"
 
 config LEDS_TRIGGERS
@@ -216,6 +272,19 @@ config LEDS_TRIGGER_BACKLIGHT
 
 	  If unsure, say N.
 
+config LEDS_TRIGGER_GPIO
+	tristate "LED GPIO Trigger"
+	depends on LEDS_TRIGGERS
+	depends on GPIOLIB
+	help
+	  This allows LEDs to be controlled by gpio events. It's good
+	  when using gpios as switches and triggering the needed LEDs
+	  from there. One use case is n810's keypad LEDs that could
+	  be triggered by this trigger when user slides up to show
+	  keypad.
+
+	  If unsure, say N.
+
 config LEDS_TRIGGER_DEFAULT_ON
 	tristate "LED Default ON Trigger"
 	depends on LEDS_TRIGGERS