Merge tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd

Pull MTD updates from David Woodhouse:
 - Various cleanups especially in NAND tests
 - Add support for NAND flash on BCMA bus
 - DT support for sh_flctl and denali NAND drivers
 - Kill obsolete/superceded drivers (fortunet, nomadik_nand)
 - Fix JFFS2 locking bug in ENOMEM failure path
 - New SPI flash chips, as usual
 - Support writing in 'reliable mode' for DiskOnChip G4
 - Debugfs support in nandsim

* tag 'for-linus-20121219' of git://git.infradead.org/linux-mtd: (96 commits)
  mtd: nand: typo in nand_id_has_period() comments
  mtd: nand/gpio: use io{read,write}*_rep accessors
  mtd: block2mtd: throttle writes by calling balance_dirty_pages_ratelimited.
  mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems
  mtd: nand/docg4: fix and improve read of factory bbt
  mtd: nand/docg4: reserve bb marker area in ecclayout
  mtd: nand/docg4: add support for writing in reliable mode
  mtd: mxc_nand: reorder part_probes to let cmdline override other sources
  mtd: mxc_nand: fix unbalanced clk_disable() in error path
  mtd: nandsim: Introduce debugfs infrastructure
  mtd: physmap_of: error checking to prevent a NULL pointer dereference
  mtg: docg3: potential divide by zero in doc_write_oob()
  mtd: bcm47xxnflash: writing support
  mtd: tests/read: initialize buffer for whole next page
  mtd: at91: atmel_nand: return bit flips for the PMECC read_page()
  mtd: fix recovery after failed write-buffer operation in cfi_cmdset_0002.c
  mtd: nand: onfi need to be probed in 8 bits mode
  mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width
  mtd: nand: print flash size during detection
  mted: nand_wait_ready timeout fix
  ...

1 files changed, 24 insertions, 17 deletions

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index d79696b2f19b..5cd141f7bfc2 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mtd/gpmi-nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/of.h>
@@ -33,6 +32,12 @@
 #include <linux/of_mtd.h>
 #include "gpmi-nand.h"
 
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
+
 /* add our owner bbt descriptor */
 static uint8_t scan_ff_pattern[] = { 0xff };
 static struct nand_bbt_descr gpmi_bbt_descr = {
@@ -222,7 +227,7 @@ void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
 
 		ret = dma_map_sg(this->dev, sgl, 1, dr);
 		if (ret == 0)
-			pr_err("map failed.\n");
+			pr_err("DMA mapping failed.\n");
 
 		this->direct_dma_map_ok = false;
 	}
@@ -314,7 +319,7 @@ int start_dma_with_bch_irq(struct gpmi_nand_data *this,
 	return 0;
 }
 
-static int __devinit
+static int
 acquire_register_block(struct gpmi_nand_data *this, const char *res_name)
 {
 	struct platform_device *pdev = this->pdev;
@@ -355,7 +360,7 @@ static void release_register_block(struct gpmi_nand_data *this)
 	res->bch_regs = NULL;
 }
 
-static int __devinit
+static int
 acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
 {
 	struct platform_device *pdev = this->pdev;
@@ -422,7 +427,7 @@ static void release_dma_channels(struct gpmi_nand_data *this)
 		}
 }
 
-static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
+static int acquire_dma_channels(struct gpmi_nand_data *this)
 {
 	struct platform_device *pdev = this->pdev;
 	struct resource *r_dma;
@@ -456,7 +461,7 @@ static int __devinit acquire_dma_channels(struct gpmi_nand_data *this)
 
 	dma_chan = dma_request_channel(mask, gpmi_dma_filter, this);
 	if (!dma_chan) {
-		pr_err("dma_request_channel failed.\n");
+		pr_err("Failed to request DMA channel.\n");
 		goto acquire_err;
 	}
 
@@ -487,7 +492,7 @@ static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
 	"gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
 };
 
-static int __devinit gpmi_get_clks(struct gpmi_nand_data *this)
+static int gpmi_get_clks(struct gpmi_nand_data *this)
 {
 	struct resources *r = &this->resources;
 	char **extra_clks = NULL;
@@ -533,7 +538,7 @@ err_clock:
 	return -ENOMEM;
 }
 
-static int __devinit acquire_resources(struct gpmi_nand_data *this)
+static int acquire_resources(struct gpmi_nand_data *this)
 {
 	struct pinctrl *pinctrl;
 	int ret;
@@ -583,7 +588,7 @@ static void release_resources(struct gpmi_nand_data *this)
 	release_dma_channels(this);
 }
 
-static int __devinit init_hardware(struct gpmi_nand_data *this)
+static int init_hardware(struct gpmi_nand_data *this)
 {
 	int ret;
 
@@ -625,7 +630,8 @@ static int read_page_prepare(struct gpmi_nand_data *this,
 						length, DMA_FROM_DEVICE);
 		if (dma_mapping_error(dev, dest_phys)) {
 			if (alt_size < length) {
-				pr_err("Alternate buffer is too small\n");
+				pr_err("%s, Alternate buffer is too small\n",
+					__func__);
 				return -ENOMEM;
 			}
 			goto map_failed;
@@ -675,7 +681,8 @@ static int send_page_prepare(struct gpmi_nand_data *this,
 						DMA_TO_DEVICE);
 		if (dma_mapping_error(dev, source_phys)) {
 			if (alt_size < length) {
-				pr_err("Alternate buffer is too small\n");
+				pr_err("%s, Alternate buffer is too small\n",
+					__func__);
 				return -ENOMEM;
 			}
 			goto map_failed;
@@ -763,7 +770,7 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
 
 error_alloc:
 	gpmi_free_dma_buffer(this);
-	pr_err("allocate DMA buffer ret!!\n");
+	pr_err("Error allocating DMA buffers!\n");
 	return -ENOMEM;
 }
 
@@ -1474,7 +1481,7 @@ static int gpmi_set_geometry(struct gpmi_nand_data *this)
 	/* Set up the NFC geometry which is used by BCH. */
 	ret = bch_set_geometry(this);
 	if (ret) {
-		pr_err("set geometry ret : %d\n", ret);
+		pr_err("Error setting BCH geometry : %d\n", ret);
 		return ret;
 	}
 
@@ -1535,7 +1542,7 @@ static void gpmi_nfc_exit(struct gpmi_nand_data *this)
 	gpmi_free_dma_buffer(this);
 }
 
-static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this)
+static int gpmi_nfc_init(struct gpmi_nand_data *this)
 {
 	struct mtd_info  *mtd = &this->mtd;
 	struct nand_chip *chip = &this->nand;
@@ -1618,7 +1625,7 @@ static const struct of_device_id gpmi_nand_id_table[] = {
 };
 MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
 
-static int __devinit gpmi_nand_probe(struct platform_device *pdev)
+static int gpmi_nand_probe(struct platform_device *pdev)
 {
 	struct gpmi_nand_data *this;
 	const struct of_device_id *of_id;
@@ -1668,7 +1675,7 @@ exit_acquire_resources:
 	return ret;
 }
 
-static int __devexit gpmi_nand_remove(struct platform_device *pdev)
+static int gpmi_nand_remove(struct platform_device *pdev)
 {
 	struct gpmi_nand_data *this = platform_get_drvdata(pdev);
 
@@ -1685,7 +1692,7 @@ static struct platform_driver gpmi_nand_driver = {
 		.of_match_table = gpmi_nand_id_table,
 	},
 	.probe   = gpmi_nand_probe,
-	.remove  = __devexit_p(gpmi_nand_remove),
+	.remove  = gpmi_nand_remove,
 	.id_table = gpmi_ids,
 };
 module_platform_driver(gpmi_nand_driver);