diff options
| author | Remi Pommarel <repk@triplefau.lt> | 2024-09-24 21:41:19 +0200 |
|---|---|---|
| committer | Jeff Johnson <quic_jjohnson@quicinc.com> | 2024-10-16 16:30:31 +0200 |
| commit | befd716ed429b26eca7abde95da6195c548470de (patch) | |
| tree | 65fb2886b26bee42c4c3b86ed534a72e28e0f790 /drivers/net | |
| parent | wifi: ath10k: Fix memory leak in management tx (diff) | |
| download | linux-befd716ed429b26eca7abde95da6195c548470de.tar.xz linux-befd716ed429b26eca7abde95da6195c548470de.zip | |
wifi: ath11k: Fix invalid ring usage in full monitor mode
On full monitor HW the monitor destination rxdma ring does not have the
same descriptor format as in the "classical" mode. The full monitor
destination entries are of hal_sw_monitor_ring type and fetched using
ath11k_dp_full_mon_process_rx while the classical ones are of type
hal_reo_entrance_ring and fetched with ath11k_dp_rx_mon_dest_process.
Although both hal_sw_monitor_ring and hal_reo_entrance_ring are of same
size, the offset to useful info (such as sw_cookie, paddr, etc) are
different. Thus if ath11k_dp_rx_mon_dest_process gets called on full
monitor destination ring, invalid skb buffer id will be fetched from DMA
ring causing issues such as the following rcu_sched stall:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 0-....: (1 GPs behind) idle=c67/0/0x7 softirq=45768/45769 fqs=1012
(t=2100 jiffies g=14817 q=8703)
Task dump for CPU 0:
task:swapper/0 state:R running task stack: 0 pid: 0 ppid: 0 flags:0x0000000a
Call trace:
dump_backtrace+0x0/0x160
show_stack+0x14/0x20
sched_show_task+0x158/0x184
dump_cpu_task+0x40/0x4c
rcu_dump_cpu_stacks+0xec/0x12c
rcu_sched_clock_irq+0x6c8/0x8a0
update_process_times+0x88/0xd0
tick_sched_timer+0x74/0x1e0
__hrtimer_run_queues+0x150/0x204
hrtimer_interrupt+0xe4/0x240
arch_timer_handler_phys+0x30/0x40
handle_percpu_devid_irq+0x80/0x130
handle_domain_irq+0x5c/0x90
gic_handle_irq+0x8c/0xb4
do_interrupt_handler+0x30/0x54
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
do_raw_spin_lock+0x60/0x100
_raw_spin_lock_bh+0x1c/0x2c
ath11k_dp_rx_mon_mpdu_pop.constprop.0+0x174/0x650
ath11k_dp_rx_process_mon_status+0x8b4/0xa80
ath11k_dp_rx_process_mon_rings+0x244/0x510
ath11k_dp_service_srng+0x190/0x300
ath11k_pcic_ext_grp_napi_poll+0x30/0xc0
__napi_poll+0x34/0x174
net_rx_action+0xf8/0x2a0
_stext+0x12c/0x2ac
irq_exit+0x94/0xc0
handle_domain_irq+0x60/0x90
gic_handle_irq+0x8c/0xb4
call_on_irq_stack+0x28/0x44
do_interrupt_handler+0x4c/0x54
el1_interrupt+0x2c/0x4c
el1h_64_irq_handler+0x14/0x1c
el1h_64_irq+0x74/0x78
arch_cpu_idle+0x14/0x20
do_idle+0xf0/0x130
cpu_startup_entry+0x24/0x50
rest_init+0xf8/0x104
arch_call_rest_init+0xc/0x14
start_kernel+0x56c/0x58c
__primary_switched+0xa0/0xa8
Thus ath11k_dp_rx_mon_dest_process(), which use classical destination
entry format, should no be called on full monitor capable HW.
Fixes: 67a9d399fcb0 ("ath11k: enable RX PPDU stats in monitor co-exist mode")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Reviewed-by: Praneesh P <quic_ppranees@quicinc.com>
Link: https://patch.msgid.link/20240924194119.15942-1-repk@triplefau.lt
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/wireless/ath/ath11k/dp_rx.c | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index 86485580dd89..2b66bfb01140 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -5291,8 +5291,11 @@ int ath11k_dp_rx_process_mon_status(struct ath11k_base *ab, int mac_id, hal_status == HAL_TLV_STATUS_PPDU_DONE) { rx_mon_stats->status_ppdu_done++; pmon->mon_ppdu_status = DP_PPDU_STATUS_DONE; - ath11k_dp_rx_mon_dest_process(ar, mac_id, budget, napi); - pmon->mon_ppdu_status = DP_PPDU_STATUS_START; + if (!ab->hw_params.full_monitor_mode) { + ath11k_dp_rx_mon_dest_process(ar, mac_id, + budget, napi); + pmon->mon_ppdu_status = DP_PPDU_STATUS_START; + } } if (ppdu_info->peer_id == HAL_INVALID_PEERID || |