Merge tag 'iio-for-3.9c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

"Third set of IIO new drivers, cleanups and fixes for the 3.9 cycle

New drivers
1) A driver for ST microelectronics sensors.  This driver already covers
   a large set of new parts (20 gyros, accelerometer and magnetometers)
   not currently covered by the existing drivers.  The intent moving forward
   is to merge this with the other drivers for similar parts already in tree.
   The lis3l02dq driver currently in staging/iio will be trivial, the lis3
   driver in misc more complex as it has a number of additional interfaces.
   Any merging in of the lis3 driver will rely on the not currently
   merged iio_input bridge driver and handling of freefall notifications
   etc.

2) A driver for the itg3200 gyroscope.

Graduations from staging
1) Cleanup and move out of staging of the adxrs450 gyroscope driver.  The
   cleanup required was all minor but there were a couple of fixes hidden in
   there.

Core and driver additions
1) Initial work from Guenter Roeck on device tree support for IIO's provider/
   consumer code. Focuses on the iio_hwmon driver and the max1363 adc driver.
   The full device tree syntax is currently under discussion but should
   follow shortly.

Cleanups and fixes
1) Remove a noop function __iio_update_buffer
2) Couple of small fixes and cleanups for the max1363
"

7 files changed, 472 insertions, 23 deletions

diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index f3eea18fdf46..2bac0eb8948d 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -103,19 +103,6 @@ int iio_update_buffers(struct iio_dev *indio_dev,
  **/
 void iio_buffer_init(struct iio_buffer *buffer);
 
-/**
- * __iio_update_buffer() - update common elements of buffers
- * @buffer:		buffer that is the event source
- * @bytes_per_datum:	size of individual datum including timestamp
- * @length:		number of datums in buffer
- **/
-static inline void __iio_update_buffer(struct iio_buffer *buffer,
-				       int bytes_per_datum, int length)
-{
-	buffer->bytes_per_datum = bytes_per_datum;
-	buffer->length = length;
-}
-
 int iio_scan_mask_query(struct iio_dev *indio_dev,
 			struct iio_buffer *buffer, int bit);
 
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
new file mode 100644
index 000000000000..c40fdf537f69
--- /dev/null
+++ b/include/linux/iio/common/st_sensors.h
@@ -0,0 +1,270 @@
+/*
+ * STMicroelectronics sensors library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_H
+#define ST_SENSORS_H
+
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
+#include <linux/irqreturn.h>
+#include <linux/iio/trigger.h>
+
+#define ST_SENSORS_TX_MAX_LENGTH		2
+#define ST_SENSORS_RX_MAX_LENGTH		6
+
+#define ST_SENSORS_ODR_LIST_MAX			10
+#define ST_SENSORS_FULLSCALE_AVL_MAX		10
+
+#define ST_SENSORS_NUMBER_ALL_CHANNELS		4
+#define ST_SENSORS_NUMBER_DATA_CHANNELS		3
+#define ST_SENSORS_ENABLE_ALL_AXIS		0x07
+#define ST_SENSORS_BYTE_FOR_CHANNEL		2
+#define ST_SENSORS_SCAN_X			0
+#define ST_SENSORS_SCAN_Y			1
+#define ST_SENSORS_SCAN_Z			2
+#define ST_SENSORS_DEFAULT_12_REALBITS		12
+#define ST_SENSORS_DEFAULT_16_REALBITS		16
+#define ST_SENSORS_DEFAULT_POWER_ON_VALUE	0x01
+#define ST_SENSORS_DEFAULT_POWER_OFF_VALUE	0x00
+#define ST_SENSORS_DEFAULT_WAI_ADDRESS		0x0f
+#define ST_SENSORS_DEFAULT_AXIS_ADDR		0x20
+#define ST_SENSORS_DEFAULT_AXIS_MASK		0x07
+#define ST_SENSORS_DEFAULT_AXIS_N_BIT		3
+
+#define ST_SENSORS_MAX_NAME			17
+#define ST_SENSORS_MAX_4WAI			7
+
+#define ST_SENSORS_LSM_CHANNELS(device_type, index, mod, endian, bits, addr) \
+{ \
+	.type = device_type, \
+	.modified = 1, \
+	.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+			IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
+	.scan_index = index, \
+	.channel2 = mod, \
+	.address = addr, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = bits, \
+		.shift = 16 - bits, \
+		.storagebits = 16, \
+		.endianness = endian, \
+	}, \
+}
+
+#define ST_SENSOR_DEV_ATTR_SAMP_FREQ() \
+		IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO, \
+			st_sensors_sysfs_get_sampling_frequency, \
+			st_sensors_sysfs_set_sampling_frequency)
+
+#define ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL() \
+		IIO_DEV_ATTR_SAMP_FREQ_AVAIL( \
+			st_sensors_sysfs_sampling_frequency_avail)
+
+#define ST_SENSORS_DEV_ATTR_SCALE_AVAIL(name) \
+		IIO_DEVICE_ATTR(name, S_IRUGO, \
+			st_sensors_sysfs_scale_avail, NULL , 0);
+
+struct st_sensor_odr_avl {
+	unsigned int hz;
+	u8 value;
+};
+
+struct st_sensor_odr {
+	u8 addr;
+	u8 mask;
+	struct st_sensor_odr_avl odr_avl[ST_SENSORS_ODR_LIST_MAX];
+};
+
+struct st_sensor_power {
+	u8 addr;
+	u8 mask;
+	u8 value_off;
+	u8 value_on;
+};
+
+struct st_sensor_axis {
+	u8 addr;
+	u8 mask;
+};
+
+struct st_sensor_fullscale_avl {
+	unsigned int num;
+	u8 value;
+	unsigned int gain;
+	unsigned int gain2;
+};
+
+struct st_sensor_fullscale {
+	u8 addr;
+	u8 mask;
+	struct st_sensor_fullscale_avl fs_avl[ST_SENSORS_FULLSCALE_AVL_MAX];
+};
+
+/**
+ * struct st_sensor_bdu - ST sensor device block data update
+ * @addr: address of the register.
+ * @mask: mask to write the block data update flag.
+ */
+struct st_sensor_bdu {
+	u8 addr;
+	u8 mask;
+};
+
+/**
+ * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt
+ * @addr: address of the register.
+ * @mask: mask to write the on/off value.
+ * struct ig1 - represents the Interrupt Generator 1 of sensors.
+ * @en_addr: address of the enable ig1 register.
+ * @en_mask: mask to write the on/off value for enable.
+ */
+struct st_sensor_data_ready_irq {
+	u8 addr;
+	u8 mask;
+	struct {
+		u8 en_addr;
+		u8 en_mask;
+	} ig1;
+};
+
+/**
+ * struct st_sensor_transfer_buffer - ST sensor device I/O buffer
+ * @buf_lock: Mutex to protect rx and tx buffers.
+ * @tx_buf: Buffer used by SPI transfer function to send data to the sensors.
+ *	This buffer is used to avoid DMA not-aligned issue.
+ * @rx_buf: Buffer used by SPI transfer to receive data from sensors.
+ *	This buffer is used to avoid DMA not-aligned issue.
+ */
+struct st_sensor_transfer_buffer {
+	struct mutex buf_lock;
+	u8 rx_buf[ST_SENSORS_RX_MAX_LENGTH];
+	u8 tx_buf[ST_SENSORS_TX_MAX_LENGTH] ____cacheline_aligned;
+};
+
+/**
+ * struct st_sensor_transfer_function - ST sensor device I/O function
+ * @read_byte: Function used to read one byte.
+ * @write_byte: Function used to write one byte.
+ * @read_multiple_byte: Function used to read multiple byte.
+ */
+struct st_sensor_transfer_function {
+	int (*read_byte) (struct st_sensor_transfer_buffer *tb,
+				struct device *dev, u8 reg_addr, u8 *res_byte);
+	int (*write_byte) (struct st_sensor_transfer_buffer *tb,
+				struct device *dev, u8 reg_addr, u8 data);
+	int (*read_multiple_byte) (struct st_sensor_transfer_buffer *tb,
+		struct device *dev, u8 reg_addr, int len, u8 *data,
+							bool multiread_bit);
+};
+
+/**
+ * struct st_sensors - ST sensors list
+ * @wai: Contents of WhoAmI register.
+ * @sensors_supported: List of supported sensors by struct itself.
+ * @ch: IIO channels for the sensor.
+ * @odr: Output data rate register and ODR list available.
+ * @pw: Power register of the sensor.
+ * @enable_axis: Enable one or more axis of the sensor.
+ * @fs: Full scale register and full scale list available.
+ * @bdu: Block data update register.
+ * @drdy_irq: Data ready register of the sensor.
+ * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
+ * @bootime: samples to discard when sensor passing from power-down to power-up.
+ */
+struct st_sensors {
+	u8 wai;
+	char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
+	struct iio_chan_spec *ch;
+	struct st_sensor_odr odr;
+	struct st_sensor_power pw;
+	struct st_sensor_axis enable_axis;
+	struct st_sensor_fullscale fs;
+	struct st_sensor_bdu bdu;
+	struct st_sensor_data_ready_irq drdy_irq;
+	bool multi_read_bit;
+	unsigned int bootime;
+};
+
+/**
+ * struct st_sensor_data - ST sensor device status
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @trig: The trigger in use by the core driver.
+ * @sensor: Pointer to the current sensor struct in use.
+ * @current_fullscale: Maximum range of measure by the sensor.
+ * @enabled: Status of the sensor (false->off, true->on).
+ * @multiread_bit: Use or not particular bit for [I2C/SPI] multiread.
+ * @buffer_data: Data used by buffer part.
+ * @odr: Output data rate of the sensor [Hz].
+ * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
+ * @tf: Transfer function structure used by I/O operations.
+ * @tb: Transfer buffers and mutex used by I/O operations.
+ */
+struct st_sensor_data {
+	struct device *dev;
+	struct iio_trigger *trig;
+	struct st_sensors *sensor;
+	struct st_sensor_fullscale_avl *current_fullscale;
+
+	bool enabled;
+	bool multiread_bit;
+
+	char *buffer_data;
+
+	unsigned int odr;
+
+	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
+
+	const struct st_sensor_transfer_function *tf;
+	struct st_sensor_transfer_buffer tb;
+};
+
+#ifdef CONFIG_IIO_BUFFER
+int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
+				const struct iio_trigger_ops *trigger_ops);
+
+void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
+
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+int st_sensors_init_sensor(struct iio_dev *indio_dev);
+
+int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_axis_enable(struct iio_dev *indio_dev, u8 axis_enable);
+
+int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr);
+
+int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable);
+
+int st_sensors_set_fullscale_by_gain(struct iio_dev *indio_dev, int scale);
+
+int st_sensors_read_info_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *ch, int *val);
+
+int st_sensors_check_device_support(struct iio_dev *indio_dev,
+			int num_sensors_list, const struct st_sensors *sensors);
+
+ssize_t st_sensors_sysfs_get_sampling_frequency(struct device *dev,
+				struct device_attribute *attr, char *buf);
+
+ssize_t st_sensors_sysfs_set_sampling_frequency(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size);
+
+ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
+				struct device_attribute *attr, char *buf);
+
+ssize_t st_sensors_sysfs_scale_avail(struct device *dev,
+				struct device_attribute *attr, char *buf);
+
+#endif /* ST_SENSORS_H */
diff --git a/include/linux/iio/common/st_sensors_i2c.h b/include/linux/iio/common/st_sensors_i2c.h
new file mode 100644
index 000000000000..67d845385ae2
--- /dev/null
+++ b/include/linux/iio/common/st_sensors_i2c.h
@@ -0,0 +1,20 @@
+/*
+ * STMicroelectronics sensors i2c library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_I2C_H
+#define ST_SENSORS_I2C_H
+
+#include <linux/i2c.h>
+#include <linux/iio/common/st_sensors.h>
+
+void st_sensors_i2c_configure(struct iio_dev *indio_dev,
+		struct i2c_client *client, struct st_sensor_data *sdata);
+
+#endif /* ST_SENSORS_I2C_H */
diff --git a/include/linux/iio/common/st_sensors_spi.h b/include/linux/iio/common/st_sensors_spi.h
new file mode 100644
index 000000000000..d964a3563dc6
--- /dev/null
+++ b/include/linux/iio/common/st_sensors_spi.h
@@ -0,0 +1,20 @@
+/*
+ * STMicroelectronics sensors spi library driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_SENSORS_SPI_H
+#define ST_SENSORS_SPI_H
+
+#include <linux/spi/spi.h>
+#include <linux/iio/common/st_sensors.h>
+
+void st_sensors_spi_configure(struct iio_dev *indio_dev,
+			struct spi_device *spi, struct st_sensor_data *sdata);
+
+#endif /* ST_SENSORS_SPI_H */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 16c35ac045bd..a85787ac66ab 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -15,6 +15,7 @@
 
 struct iio_dev;
 struct iio_chan_spec;
+struct device;
 
 /**
  * struct iio_channel - everything needed for a consumer to use a channel
@@ -48,14 +49,14 @@ void iio_channel_release(struct iio_channel *chan);
 
 /**
  * iio_channel_get_all() - get all channels associated with a client
- * @name:		name of consumer device.
+ * @dev:		Pointer to consumer device.
  *
  * Returns an array of iio_channel structures terminated with one with
  * null iio_dev pointer.
  * This function is used by fairly generic consumers to get all the
  * channels registered as having this consumer.
  */
-struct iio_channel *iio_channel_get_all(const char *name);
+struct iio_channel *iio_channel_get_all(struct device *dev);
 
 /**
  * iio_channel_release_all() - reverse iio_channel_get_all
@@ -66,7 +67,7 @@ void iio_channel_release_all(struct iio_channel *chan);
 struct iio_cb_buffer;
 /**
  * iio_channel_get_all_cb() - register callback for triggered capture
- * @name:		Name of client device.
+ * @dev:		Pointer to client device.
  * @cb:			Callback function.
  * @private:		Private data passed to callback.
  *
@@ -74,7 +75,7 @@ struct iio_cb_buffer;
  * So if the channels requested come from different devices this will
  * fail.
  */
-struct iio_cb_buffer *iio_channel_get_all_cb(const char *name,
+struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 					     int (*cb)(u8 *data,
 						       void *private),
 					     void *private);
diff --git a/include/linux/iio/driver.h b/include/linux/iio/driver.h
index a4f8b2e05af5..7dfb10ee2669 100644
--- a/include/linux/iio/driver.h
+++ b/include/linux/iio/driver.h
@@ -22,13 +22,10 @@ int iio_map_array_register(struct iio_dev *indio_dev,
 			   struct iio_map *map);
 
 /**
- * iio_map_array_unregister() - tell the core to remove consumer mappings
+ * iio_map_array_unregister() - tell the core to remove consumer mappings for
+ *				the given provider device
  * @indio_dev:	provider device
- * @map:	array of mappings to remove. Note these must have same memory
- *		addresses as those originally added not just equal parameter
- *		values.
  */
-int iio_map_array_unregister(struct iio_dev *indio_dev,
-			     struct iio_map *map);
+int iio_map_array_unregister(struct iio_dev *indio_dev);
 
 #endif
diff --git a/include/linux/iio/gyro/itg3200.h b/include/linux/iio/gyro/itg3200.h
new file mode 100644
index 000000000000..c53f16914b77
--- /dev/null
+++ b/include/linux/iio/gyro/itg3200.h
@@ -0,0 +1,154 @@
+/*
+ * itg3200.h -- support InvenSense ITG3200
+ *              Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef I2C_ITG3200_H_
+#define I2C_ITG3200_H_
+
+#include <linux/iio/iio.h>
+
+/* Register with I2C address (34h) */
+#define ITG3200_REG_ADDRESS		0x00
+
+/* Sample rate divider
+ * Range: 0 to 255
+ * Default value: 0x00 */
+#define ITG3200_REG_SAMPLE_RATE_DIV	0x15
+
+/* Digital low pass filter settings */
+#define ITG3200_REG_DLPF		0x16
+/* DLPF full scale range */
+#define ITG3200_DLPF_FS_SEL_2000	0x18
+/* Bandwidth (Hz) and internal sample rate
+ * (kHz) of DLPF */
+#define ITG3200_DLPF_256_8		0x00
+#define ITG3200_DLPF_188_1		0x01
+#define ITG3200_DLPF_98_1		0x02
+#define ITG3200_DLPF_42_1		0x03
+#define ITG3200_DLPF_20_1		0x04
+#define ITG3200_DLPF_10_1		0x05
+#define ITG3200_DLPF_5_1		0x06
+
+#define ITG3200_DLPF_CFG_MASK		0x07
+
+/* Configuration for interrupt operations */
+#define ITG3200_REG_IRQ_CONFIG		0x17
+/* Logic level */
+#define ITG3200_IRQ_ACTIVE_LOW		0x80
+#define ITG3200_IRQ_ACTIVE_HIGH		0x00
+/* Drive type */
+#define ITG3200_IRQ_OPEN_DRAIN		0x40
+#define ITG3200_IRQ_PUSH_PULL		0x00
+/* Latch mode */
+#define ITG3200_IRQ_LATCH_UNTIL_CLEARED	0x20
+#define ITG3200_IRQ_LATCH_50US_PULSE	0x00
+/* Latch clear method */
+#define ITG3200_IRQ_LATCH_CLEAR_ANY	0x10
+#define ITG3200_IRQ_LATCH_CLEAR_STATUS	0x00
+/* Enable interrupt when device is ready */
+#define ITG3200_IRQ_DEVICE_RDY_ENABLE	0x04
+/* Enable interrupt when data is available */
+#define ITG3200_IRQ_DATA_RDY_ENABLE	0x01
+
+/* Determine the status of ITG-3200 interrupts */
+#define ITG3200_REG_IRQ_STATUS		0x1A
+/* Status of 'device is ready'-interrupt */
+#define ITG3200_IRQ_DEVICE_RDY_STATUS	0x04
+/* Status of 'data is available'-interrupt */
+#define ITG3200_IRQ_DATA_RDY_STATUS	0x01
+
+/* Sensor registers */
+#define ITG3200_REG_TEMP_OUT_H		0x1B
+#define ITG3200_REG_TEMP_OUT_L		0x1C
+#define ITG3200_REG_GYRO_XOUT_H		0x1D
+#define ITG3200_REG_GYRO_XOUT_L		0x1E
+#define ITG3200_REG_GYRO_YOUT_H		0x1F
+#define ITG3200_REG_GYRO_YOUT_L		0x20
+#define ITG3200_REG_GYRO_ZOUT_H		0x21
+#define ITG3200_REG_GYRO_ZOUT_L		0x22
+
+/* Power management */
+#define ITG3200_REG_POWER_MANAGEMENT	0x3E
+/* Reset device and internal registers to the
+ * power-up-default settings */
+#define ITG3200_RESET			0x80
+/* Enable low power sleep mode */
+#define ITG3200_SLEEP			0x40
+/* Put according gyroscope in standby mode */
+#define ITG3200_STANDBY_GYRO_X		0x20
+#define ITG3200_STANDBY_GYRO_Y		0x10
+#define ITG3200_STANDBY_GYRO_Z		0x08
+/* Determine the device clock source */
+#define ITG3200_CLK_INTERNAL		0x00
+#define ITG3200_CLK_GYRO_X		0x01
+#define ITG3200_CLK_GYRO_Y		0x02
+#define ITG3200_CLK_GYRO_Z		0x03
+#define ITG3200_CLK_EXT_32K		0x04
+#define ITG3200_CLK_EXT_19M		0x05
+
+
+/**
+ * struct itg3200 - device instance specific data
+ * @i2c:    actual i2c_client
+ * @trig:   data ready trigger from itg3200 pin
+ **/
+struct itg3200 {
+	struct i2c_client	*i2c;
+	struct iio_trigger	*trig;
+};
+
+enum ITG3200_SCAN_INDEX {
+	ITG3200_SCAN_TEMP,
+	ITG3200_SCAN_GYRO_X,
+	ITG3200_SCAN_GYRO_Y,
+	ITG3200_SCAN_GYRO_Z,
+	ITG3200_SCAN_ELEMENTS,
+};
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 val);
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 *val);
+
+
+#ifdef CONFIG_IIO_BUFFER
+
+void itg3200_remove_trigger(struct iio_dev *indio_dev);
+int itg3200_probe_trigger(struct iio_dev *indio_dev);
+
+int itg3200_buffer_configure(struct iio_dev *indio_dev);
+void itg3200_buffer_unconfigure(struct iio_dev *indio_dev);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline void itg3200_remove_trigger(struct iio_dev *indio_dev)
+{
+}
+
+static inline int itg3200_probe_trigger(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline int itg3200_buffer_configure(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+static inline void itg3200_buffer_unconfigure(struct iio_dev *indio_dev)
+{
+}
+
+#endif  /* CONFIG_IIO_RING_BUFFER */
+
+#endif /* ITG3200_H_ */