diff options
Diffstat (limited to 'Documentation/devicetree/bindings/arm/arm-boards')
| -rw-r--r-- | Documentation/devicetree/bindings/arm/arm-boards | 237 |
1 files changed, 0 insertions, 237 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards deleted file mode 100644 index 96b1dad58253..000000000000 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ /dev/null @@ -1,237 +0,0 @@ -ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) ------------------------------------------------------------------------------ -ARM's oldest Linux-supported platform with connectors for different core -tiles of ARMv4, ARMv5 and ARMv6 type. - -Required properties (in root node): - compatible = "arm,integrator-ap"; /* Application Platform */ - compatible = "arm,integrator-cp"; /* Compact Platform */ - -FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. - -Required nodes: - -- core-module: the root node to the Integrator platforms must have - a core-module with regs and the compatible string - "arm,core-module-integrator" -- external-bus-interface: the root node to the Integrator platforms - must have an external bus interface with regs and the - compatible-string "arm,external-bus-interface" - - Required properties for the core module: - - regs: the location and size of the core module registers, one - range of 0x200 bytes. - -- syscon: the root node of the Integrator platforms must have a - system controller node pointing to the control registers, - with the compatible string - "arm,integrator-ap-syscon" - "arm,integrator-cp-syscon" - respectively. - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x100 bytes. - - Required properties for the AP system controller: - - interrupts: the AP syscon node must include the logical module - interrupts, stated in order of module instance <module 0>, - <module 1>, <module 2> ... for the CP system controller this - is not required not of any use. - -/dts-v1/; -/include/ "integrator.dtsi" - -/ { - model = "ARM Integrator/AP"; - compatible = "arm,integrator-ap"; - - core-module@10000000 { - compatible = "arm,core-module-integrator"; - reg = <0x10000000 0x200>; - }; - - ebi@12000000 { - compatible = "arm,external-bus-interface"; - reg = <0x12000000 0x100>; - }; - - syscon { - compatible = "arm,integrator-ap-syscon"; - reg = <0x11000000 0x100>; - interrupt-parent = <&pic>; - /* These are the logic module IRQs */ - interrupts = <9>, <10>, <11>, <12>; - }; -}; - - -ARM Versatile Application and Platform Baseboards -------------------------------------------------- -ARM's development hardware platform with connectors for customizable -core tiles. The hardware configuration of the Versatile boards is -highly customizable. - -Required properties (in root node): - compatible = "arm,versatile-ab"; /* Application baseboard */ - compatible = "arm,versatile-pb"; /* Platform baseboard */ - -Interrupt controllers: -- VIC required properties: - compatible = "arm,versatile-vic"; - interrupt-controller; - #interrupt-cells = <1>; - -- SIC required properties: - compatible = "arm,versatile-sic"; - interrupt-controller; - #interrupt-cells = <1>; - -Required nodes: - -- core-module: the root node to the Versatile platforms must have - a core-module with regs and the compatible strings - "arm,core-module-versatile", "syscon" - -Optional nodes: - -- arm,versatile-ib2-syscon : if the Versatile has an IB2 interface - board mounted, this has a separate system controller that is - defined in this node. - Required properties: - compatible = "arm,versatile-ib2-syscon", "syscon" - -ARM RealView Boards -------------------- -The RealView boards cover tailored evaluation boards that are used to explore -the ARM11 and Cortex A-8 and Cortex A-9 processors. - -Required properties (in root node): - /* RealView Emulation Baseboard */ - compatible = "arm,realview-eb"; - /* RealView Platform Baseboard for ARM1176JZF-S */ - compatible = "arm,realview-pb1176"; - /* RealView Platform Baseboard for ARM11 MPCore */ - compatible = "arm,realview-pb11mp"; - /* RealView Platform Baseboard for Cortex A-8 */ - compatible = "arm,realview-pba8"; - /* RealView Platform Baseboard Explore for Cortex A-9 */ - compatible = "arm,realview-pbx"; - -Required nodes: - -- soc: some node of the RealView platforms must be the SoC - node that contain the SoC-specific devices, with the compatible - string set to one of these tuples: - "arm,realview-eb-soc", "simple-bus" - "arm,realview-pb1176-soc", "simple-bus" - "arm,realview-pb11mp-soc", "simple-bus" - "arm,realview-pba8-soc", "simple-bus" - "arm,realview-pbx-soc", "simple-bus" - -- syscon: some subnode of the RealView SoC node must be a - system controller node pointing to the control registers, - with the compatible string set to one of these: - "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb11mp-revc-syscon", "arm,realview-eb-syscon", "syscon" - "arm,realview-eb-syscon", "syscon" - "arm,realview-pb1176-syscon", "syscon" - "arm,realview-pb11mp-syscon", "syscon" - "arm,realview-pba8-syscon", "syscon" - "arm,realview-pbx-syscon", "syscon" - - Required properties for the system controller: - - regs: the location and size of the system controller registers, - one range of 0x1000 bytes. - -Example: - -/dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "ARM RealView PB1176 with device tree"; - compatible = "arm,realview-pb1176"; - #address-cells = <1>; - #size-cells = <1>; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,realview-pb1176-soc", "simple-bus"; - ranges; - - syscon: syscon@10000000 { - compatible = "arm,realview-syscon", "syscon"; - reg = <0x10000000 0x1000>; - }; - - }; -}; - -ARM Versatile Express Boards ------------------------------ -For details on the device tree bindings for ARM Versatile Express boards -please consult the vexpress.txt file in the same directory as this file. - -ARM Juno Boards ----------------- -The Juno boards are targeting development for AArch64 systems. The first -iteration, Juno r0, is a vehicle for evaluating big.LITTLE on AArch64, -with the second iteration, Juno r1, mainly aimed at development of PCIe -based systems. Juno r1 also has support for AXI masters placed on the TLX -connectors to join the coherency domain. - -Juno boards are described in a similar way to ARM Versatile Express boards, -with the motherboard part of the hardware being described in a separate file -to highlight the fact that is part of the support infrastructure for the SoC. -Juno device tree bindings also share the Versatile Express bindings as -described under the RS1 memory mapping. - -Required properties (in root node): - compatible = "arm,juno"; /* For Juno r0 board */ - compatible = "arm,juno-r1"; /* For Juno r1 board */ - compatible = "arm,juno-r2"; /* For Juno r2 board */ - -Required nodes: -The description for the board must include: - - a "psci" node describing the boot method used for the secondary CPUs. - A detailed description of the bindings used for "psci" nodes is present - in the psci.yaml file. - - a "cpus" node describing the available cores and their associated - "enable-method"s. For more details see cpus.yaml file. - -Example: - -/dts-v1/; -/ { - model = "ARM Juno development board (r0)"; - compatible = "arm,juno", "arm,vexpress"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - A57_0: cpu@0 { - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - - A53_0: cpu@100 { - compatible = "arm,cortex-a53"; - reg = <0x0 0x100>; - device_type = "cpu"; - enable-method = "psci"; - }; - - ..... - }; - -}; |