2 files changed, 0 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
index 3c35338a2867..269b1ae2fca9 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -119,7 +119,6 @@ Optional properties:
 - interface-pix-fmt: How this display is connected to the
   display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
   and "lvds666".
-- edid: verbatim EDID data block describing attached display.
 - ddc: phandle describing the i2c bus handling the display data
   channel
 - port@[0-1]: Port nodes with endpoint definitions as defined in
@@ -131,7 +130,6 @@ example:
 
 disp0 {
 	compatible = "fsl,imx-parallel-display";
-	edid = [edid-data];
 	interface-pix-fmt = "rgb24";
 
 	port@0 {
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
index 8e6e7d797943..03653a291b54 100644
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -62,7 +62,6 @@ Required properties:
    display-timings are used instead.
 
 Optional properties (required if display-timings are used):
- - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
  - display-timings : A node that describes the display timings as defined in
    Documentation/devicetree/bindings/display/panel/display-timing.txt.
  - fsl,data-mapping : should be "spwg" or "jeida"