1 files changed, 23 insertions, 23 deletions

diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
index 70b6bda3cf98..f348e66fb515 100644
--- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml
@@ -147,7 +147,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8366rb";
                     /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
                     mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
@@ -163,35 +163,35 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan0";
                                     phy-handle = <&phy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan1";
                                     phy-handle = <&phy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                                     phy-handle = <&phy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan3";
                                     phy-handle = <&phy3>;
                             };
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                                     phy-handle = <&phy4>;
                             };
-                            port@5 {
+                            ethernet-port@5 {
                                     reg = <5>;
                                     ethernet = <&gmac0>;
                                     phy-mode = "rgmii";
@@ -241,7 +241,7 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     platform {
-            switch {
+            ethernet-switch {
                     compatible = "realtek,rtl8365mb";
                     mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
                     mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
@@ -255,30 +255,30 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "swp0";
                                     phy-handle = <&ethphy0>;
                             };
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "swp1";
                                     phy-handle = <&ethphy1>;
                             };
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "swp2";
                                     phy-handle = <&ethphy2>;
                             };
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "swp3";
                                     phy-handle = <&ethphy3>;
                             };
-                            port@6 {
+                            ethernet-port@6 {
                                     reg = <6>;
                                     ethernet = <&fec1>;
                                     phy-mode = "rgmii";
@@ -330,7 +330,7 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-            switch@29 {
+            ethernet-switch@29 {
                     compatible = "realtek,rtl8365mb";
                     reg = <29>;
 
@@ -344,36 +344,36 @@ examples:
                             #interrupt-cells = <1>;
                     };
 
-                    ports {
+                    ethernet-ports {
                             #address-cells = <1>;
                             #size-cells = <0>;
 
-                            port@0 {
+                            ethernet-port@0 {
                                     reg = <0>;
                                     label = "lan4";
                             };
 
-                            port@1 {
+                            ethernet-port@1 {
                                     reg = <1>;
                                     label = "lan3";
                             };
 
-                            port@2 {
+                            ethernet-port@2 {
                                     reg = <2>;
                                     label = "lan2";
                             };
 
-                            port@3 {
+                            ethernet-port@3 {
                                     reg = <3>;
                                     label = "lan1";
                             };
 
-                            port@4 {
+                            ethernet-port@4 {
                                     reg = <4>;
                                     label = "wan";
                             };
 
-                            port@7 {
+                            ethernet-port@7 {
                                     reg = <7>;
                                     ethernet = <&ethernet>;
                                     phy-mode = "rgmii";