diff options
Diffstat (limited to 'Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt | 19 |
1 files changed, 12 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 162e024b95a0..30a79da9c039 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -1,12 +1,17 @@ ARM Freescale DSPI controller Required properties: -- compatible : "fsl,vf610-dspi", "fsl,ls1021a-v1.0-dspi", - "fsl,ls2085a-dspi" - or - "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" - "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - "fsl,ls1088a-dspi" followed by "fsl,ls1021a-v1.0-dspi" +- compatible : must be one of: + "fsl,vf610-dspi", + "fsl,ls1021a-v1.0-dspi", + "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1028a-dspi", + "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), + "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), + "fsl,ls2085a-dspi", + "fsl,lx2160a-dspi", - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. @@ -14,11 +19,11 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must contain a "default" entry. - spi-num-chipselects : the number of the chipselect signals. -- bus-num : the slave chip chipselect signal number. Optional property: - big-endian: If present the dspi device's registers are implemented in big endian mode. +- bus-num : the slave chip chipselect signal number. Optional SPI slave node properties: - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip |