diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/dwc3.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/dwc3.txt | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index 66780a47ad85..9946ff9ba735 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -7,7 +7,8 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. - - clock-names: should contain "ref", "bus_early", "suspend" + - clock-names: list of clock names. Ideally should be "ref", + "bus_early", "suspend" but may be less or more. - clocks: list of phandle and clock specifier pairs corresponding to entries in the clock-names property. @@ -36,7 +37,7 @@ Optional properties: - phys: from the *Generic PHY* bindings - phy-names: from the *Generic PHY* bindings; supported names are "usb2-phy" or "usb3-phy". - - resets: a single pair of phandle and reset specifier + - resets: set of phandle and reset specifier pairs - snps,usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - snps,usb3_lpm_capable: determines if platform is USB3 LPM capable - snps,dis-start-transfer-quirk: when set, disable isoc START TRANSFER command @@ -75,6 +76,8 @@ Optional properties: from P0 to P1/P2/P3 without delay. - snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check during HS transmit. + - snps,parkmode-disable-ss-quirk: when set, all SuperSpeed bus instances in + park mode are disabled. - snps,dis_metastability_quirk: when set, disable metastability workaround. CAUTION: use only if you are absolutely sure of it. - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal |