diff options
Diffstat (limited to 'arch/arm/common')
| -rw-r--r-- | arch/arm/common/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/common/sa1111.c | 64 |
2 files changed, 1 insertions, 65 deletions
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index c8e198631d41..bc158fd227e1 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 config SA1111 bool - select DMABOUNCE if !ARCH_PXA + select ZONE_DMA if ARCH_SA1100 config DMABOUNCE bool diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 2343e2b6214d..f5e6990b8856 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -1389,70 +1389,9 @@ void sa1111_driver_unregister(struct sa1111_driver *driver) } EXPORT_SYMBOL(sa1111_driver_unregister); -#ifdef CONFIG_DMABOUNCE -/* - * According to the "Intel StrongARM SA-1111 Microprocessor Companion - * Chip Specification Update" (June 2000), erratum #7, there is a - * significant bug in the SA1111 SDRAM shared memory controller. If - * an access to a region of memory above 1MB relative to the bank base, - * it is important that address bit 10 _NOT_ be asserted. Depending - * on the configuration of the RAM, bit 10 may correspond to one - * of several different (processor-relative) address bits. - * - * This routine only identifies whether or not a given DMA address - * is susceptible to the bug. - * - * This should only get called for sa1111_device types due to the - * way we configure our device dma_masks. - */ -static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) -{ - /* - * Section 4.6 of the "Intel StrongARM SA-1111 Development Module - * User's Guide" mentions that jumpers R51 and R52 control the - * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or - * SDRAM bank 1 on Neponset). The default configuration selects - * Assabet, so any address in bank 1 is necessarily invalid. - */ - return (machine_is_assabet() || machine_is_pfs168()) && - (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); -} - -static int sa1111_notifier_call(struct notifier_block *n, unsigned long action, - void *data) -{ - struct sa1111_dev *dev = to_sa1111_device(data); - - switch (action) { - case BUS_NOTIFY_ADD_DEVICE: - if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) { - int ret = dmabounce_register_dev(&dev->dev, 1024, 4096, - sa1111_needs_bounce); - if (ret) - dev_err(&dev->dev, "failed to register with dmabounce: %d\n", ret); - } - break; - - case BUS_NOTIFY_DEL_DEVICE: - if (dev->dev.dma_mask && dev->dma_mask < 0xffffffffUL) - dmabounce_unregister_dev(&dev->dev); - break; - } - return NOTIFY_OK; -} - -static struct notifier_block sa1111_bus_notifier = { - .notifier_call = sa1111_notifier_call, -}; -#endif - static int __init sa1111_init(void) { int ret = bus_register(&sa1111_bus_type); -#ifdef CONFIG_DMABOUNCE - if (ret == 0) - bus_register_notifier(&sa1111_bus_type, &sa1111_bus_notifier); -#endif if (ret == 0) platform_driver_register(&sa1111_device_driver); return ret; @@ -1461,9 +1400,6 @@ static int __init sa1111_init(void) static void __exit sa1111_exit(void) { platform_driver_unregister(&sa1111_device_driver); -#ifdef CONFIG_DMABOUNCE - bus_unregister_notifier(&sa1111_bus_type, &sa1111_bus_notifier); -#endif bus_unregister(&sa1111_bus_type); } |