diff options
Diffstat (limited to 'arch/x86/boot/compressed/head_64.S')
| -rw-r--r-- | arch/x86/boot/compressed/head_64.S | 311 |
1 files changed, 26 insertions, 285 deletions
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index d33f060900d2..a75712991df3 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -38,6 +38,14 @@ #include "pgtable.h" /* + * Fix alignment at 16 bytes. Following CONFIG_FUNCTION_ALIGNMENT will result + * in assembly errors due to trying to move .org backward due to the excessive + * alignment. + */ +#undef __ALIGN +#define __ALIGN .balign 16, 0x90 + +/* * Locally defined symbols should be marked hidden: */ .hidden _bss @@ -118,7 +126,9 @@ SYM_FUNC_START(startup_32) 1: /* Setup Exception handling for SEV-ES */ +#ifdef CONFIG_AMD_MEM_ENCRYPT call startup32_load_idt +#endif /* Make sure cpu supports long mode. */ call verify_cpu @@ -178,12 +188,13 @@ SYM_FUNC_START(startup_32) */ /* * If SEV is active then set the encryption mask in the page tables. - * This will insure that when the kernel is copied and decompressed + * This will ensure that when the kernel is copied and decompressed * it will be done so encrypted. */ - call get_sev_encryption_bit xorl %edx, %edx #ifdef CONFIG_AMD_MEM_ENCRYPT + call get_sev_encryption_bit + xorl %edx, %edx testl %eax, %eax jz 1f subl $32, %eax /* Encryption bit is always above bit 31 */ @@ -249,6 +260,11 @@ SYM_FUNC_START(startup_32) movl $__BOOT_TSS, %eax ltr %ax +#ifdef CONFIG_AMD_MEM_ENCRYPT + /* Check if the C-bit position is correct when SEV is active */ + call startup32_check_sev_cbit +#endif + /* * Setup for the jump to 64bit mode * @@ -261,29 +277,11 @@ SYM_FUNC_START(startup_32) */ leal rva(startup_64)(%ebp), %eax #ifdef CONFIG_EFI_MIXED - movl rva(efi32_boot_args)(%ebp), %edi - testl %edi, %edi - jz 1f - leal rva(efi64_stub_entry)(%ebp), %eax - movl rva(efi32_boot_args+4)(%ebp), %esi - movl rva(efi32_boot_args+8)(%ebp), %edx // saved bootparams pointer - testl %edx, %edx - jnz 1f - /* - * efi_pe_entry uses MS calling convention, which requires 32 bytes of - * shadow space on the stack even if all arguments are passed in - * registers. We also need an additional 8 bytes for the space that - * would be occupied by the return address, and this also results in - * the correct stack alignment for entry. - */ - subl $40, %esp - leal rva(efi_pe_entry)(%ebp), %eax - movl %edi, %ecx // MS calling convention - movl %esi, %edx + cmpb $1, rva(efi_is64)(%ebp) + je 1f + leal rva(startup_64_mixed_mode)(%ebp), %eax 1: #endif - /* Check if the C-bit position is correct when SEV is active */ - call startup32_check_sev_cbit pushl $__KERNEL_CS pushl %eax @@ -296,38 +294,14 @@ SYM_FUNC_START(startup_32) lret SYM_FUNC_END(startup_32) -#ifdef CONFIG_EFI_MIXED +#if IS_ENABLED(CONFIG_EFI_MIXED) && IS_ENABLED(CONFIG_EFI_HANDOVER_PROTOCOL) .org 0x190 SYM_FUNC_START(efi32_stub_entry) add $0x4, %esp /* Discard return address */ popl %ecx popl %edx popl %esi - - call 1f -1: pop %ebp - subl $ rva(1b), %ebp - - movl %esi, rva(efi32_boot_args+8)(%ebp) -SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL) - movl %ecx, rva(efi32_boot_args)(%ebp) - movl %edx, rva(efi32_boot_args+4)(%ebp) - movb $0, rva(efi_is64)(%ebp) - - /* Save firmware GDTR and code/data selectors */ - sgdtl rva(efi32_boot_gdt)(%ebp) - movw %cs, rva(efi32_boot_cs)(%ebp) - movw %ds, rva(efi32_boot_ds)(%ebp) - - /* Store firmware IDT descriptor */ - sidtl rva(efi32_boot_idt)(%ebp) - - /* Disable paging */ - movl %cr0, %eax - btrl $X86_CR0_PG_BIT, %eax - movl %eax, %cr0 - - jmp startup_32 + jmp efi32_entry SYM_FUNC_END(efi32_stub_entry) #endif @@ -550,7 +524,9 @@ trampoline_return: SYM_CODE_END(startup_64) #ifdef CONFIG_EFI_STUB +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL .org 0x390 +#endif SYM_FUNC_START(efi64_stub_entry) and $~0xf, %rsp /* realign the stack */ movq %rdx, %rbx /* save boot_params pointer */ @@ -713,6 +689,7 @@ SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode) jmp 1b SYM_FUNC_END(.Lno_longmode) + .globl verify_cpu #include "../../kernel/verify_cpu.S" .data @@ -744,242 +721,6 @@ SYM_DATA_START(boot_idt) .endr SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end) -#ifdef CONFIG_AMD_MEM_ENCRYPT -SYM_DATA_START(boot32_idt_desc) - .word boot32_idt_end - boot32_idt - 1 - .long 0 -SYM_DATA_END(boot32_idt_desc) - .balign 8 -SYM_DATA_START(boot32_idt) - .rept 32 - .quad 0 - .endr -SYM_DATA_END_LABEL(boot32_idt, SYM_L_GLOBAL, boot32_idt_end) -#endif - -#ifdef CONFIG_EFI_STUB -SYM_DATA(image_offset, .long 0) -#endif -#ifdef CONFIG_EFI_MIXED -SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0) -SYM_DATA(efi_is64, .byte 1) - -#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime) -#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol) -#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base) - - __HEAD - .code32 -SYM_FUNC_START(efi32_pe_entry) -/* - * efi_status_t efi32_pe_entry(efi_handle_t image_handle, - * efi_system_table_32_t *sys_table) - */ - - pushl %ebp - movl %esp, %ebp - pushl %eax // dummy push to allocate loaded_image - - pushl %ebx // save callee-save registers - pushl %edi - - call verify_cpu // check for long mode support - testl %eax, %eax - movl $0x80000003, %eax // EFI_UNSUPPORTED - jnz 2f - - call 1f -1: pop %ebx - subl $ rva(1b), %ebx - - /* Get the loaded image protocol pointer from the image handle */ - leal -4(%ebp), %eax - pushl %eax // &loaded_image - leal rva(loaded_image_proto)(%ebx), %eax - pushl %eax // pass the GUID address - pushl 8(%ebp) // pass the image handle - - /* - * Note the alignment of the stack frame. - * sys_table - * handle <-- 16-byte aligned on entry by ABI - * return address - * frame pointer - * loaded_image <-- local variable - * saved %ebx <-- 16-byte aligned here - * saved %edi - * &loaded_image - * &loaded_image_proto - * handle <-- 16-byte aligned for call to handle_protocol - */ - - movl 12(%ebp), %eax // sys_table - movl ST32_boottime(%eax), %eax // sys_table->boottime - call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol - addl $12, %esp // restore argument space - testl %eax, %eax - jnz 2f - - movl 8(%ebp), %ecx // image_handle - movl 12(%ebp), %edx // sys_table - movl -4(%ebp), %esi // loaded_image - movl LI32_image_base(%esi), %esi // loaded_image->image_base - movl %ebx, %ebp // startup_32 for efi32_pe_stub_entry - /* - * We need to set the image_offset variable here since startup_32() will - * use it before we get to the 64-bit efi_pe_entry() in C code. - */ - subl %esi, %ebx - movl %ebx, rva(image_offset)(%ebp) // save image_offset - jmp efi32_pe_stub_entry - -2: popl %edi // restore callee-save registers - popl %ebx - leave - RET -SYM_FUNC_END(efi32_pe_entry) - - .section ".rodata" - /* EFI loaded image protocol GUID */ - .balign 4 -SYM_DATA_START_LOCAL(loaded_image_proto) - .long 0x5b1b31a1 - .word 0x9562, 0x11d2 - .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b -SYM_DATA_END(loaded_image_proto) -#endif - -#ifdef CONFIG_AMD_MEM_ENCRYPT - __HEAD - .code32 -/* - * Write an IDT entry into boot32_idt - * - * Parameters: - * - * %eax: Handler address - * %edx: Vector number - * - * Physical offset is expected in %ebp - */ -SYM_FUNC_START(startup32_set_idt_entry) - push %ebx - push %ecx - - /* IDT entry address to %ebx */ - leal rva(boot32_idt)(%ebp), %ebx - shl $3, %edx - addl %edx, %ebx - - /* Build IDT entry, lower 4 bytes */ - movl %eax, %edx - andl $0x0000ffff, %edx # Target code segment offset [15:0] - movl $__KERNEL32_CS, %ecx # Target code segment selector - shl $16, %ecx - orl %ecx, %edx - - /* Store lower 4 bytes to IDT */ - movl %edx, (%ebx) - - /* Build IDT entry, upper 4 bytes */ - movl %eax, %edx - andl $0xffff0000, %edx # Target code segment offset [31:16] - orl $0x00008e00, %edx # Present, Type 32-bit Interrupt Gate - - /* Store upper 4 bytes to IDT */ - movl %edx, 4(%ebx) - - pop %ecx - pop %ebx - RET -SYM_FUNC_END(startup32_set_idt_entry) -#endif - -SYM_FUNC_START(startup32_load_idt) -#ifdef CONFIG_AMD_MEM_ENCRYPT - /* #VC handler */ - leal rva(startup32_vc_handler)(%ebp), %eax - movl $X86_TRAP_VC, %edx - call startup32_set_idt_entry - - /* Load IDT */ - leal rva(boot32_idt)(%ebp), %eax - movl %eax, rva(boot32_idt_desc+2)(%ebp) - lidt rva(boot32_idt_desc)(%ebp) -#endif - RET -SYM_FUNC_END(startup32_load_idt) - -/* - * Check for the correct C-bit position when the startup_32 boot-path is used. - * - * The check makes use of the fact that all memory is encrypted when paging is - * disabled. The function creates 64 bits of random data using the RDRAND - * instruction. RDRAND is mandatory for SEV guests, so always available. If the - * hypervisor violates that the kernel will crash right here. - * - * The 64 bits of random data are stored to a memory location and at the same - * time kept in the %eax and %ebx registers. Since encryption is always active - * when paging is off the random data will be stored encrypted in main memory. - * - * Then paging is enabled. When the C-bit position is correct all memory is - * still mapped encrypted and comparing the register values with memory will - * succeed. An incorrect C-bit position will map all memory unencrypted, so that - * the compare will use the encrypted random data and fail. - */ -SYM_FUNC_START(startup32_check_sev_cbit) -#ifdef CONFIG_AMD_MEM_ENCRYPT - pushl %eax - pushl %ebx - pushl %ecx - pushl %edx - - /* Check for non-zero sev_status */ - movl rva(sev_status)(%ebp), %eax - testl %eax, %eax - jz 4f - - /* - * Get two 32-bit random values - Don't bail out if RDRAND fails - * because it is better to prevent forward progress if no random value - * can be gathered. - */ -1: rdrand %eax - jnc 1b -2: rdrand %ebx - jnc 2b - - /* Store to memory and keep it in the registers */ - movl %eax, rva(sev_check_data)(%ebp) - movl %ebx, rva(sev_check_data+4)(%ebp) - - /* Enable paging to see if encryption is active */ - movl %cr0, %edx /* Backup %cr0 in %edx */ - movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */ - movl %ecx, %cr0 - - cmpl %eax, rva(sev_check_data)(%ebp) - jne 3f - cmpl %ebx, rva(sev_check_data+4)(%ebp) - jne 3f - - movl %edx, %cr0 /* Restore previous %cr0 */ - - jmp 4f - -3: /* Check failed - hlt the machine */ - hlt - jmp 3b - -4: - popl %edx - popl %ecx - popl %ebx - popl %eax -#endif - RET -SYM_FUNC_END(startup32_check_sev_cbit) - /* * Stack and heap for uncompression */ |