7 files changed, 394 insertions, 45 deletions

diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index ba420e484787..9c2d9bf8f100 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -53,6 +53,18 @@ config IIO_CROS_EC_BARO
 	  To compile this driver as a module, choose M here: the module
 	  will be called cros_ec_baro.
 
+config DLHL60D
+	tristate "All Sensors DLHL60D and DLHL60G low voltage digital pressure sensors"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for the All Sensors DLH series
+	  pressure sensors driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called dlhl60d.
+
 config DPS310
 	tristate "Infineon DPS310 pressure and temperature sensor"
 	depends on I2C
diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile
index d8f5ace1f25d..5a79192d8cb5 100644
--- a/drivers/iio/pressure/Makefile
+++ b/drivers/iio/pressure/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_BMP280) += bmp280.o
 bmp280-objs := bmp280-core.o bmp280-regmap.o
 obj-$(CONFIG_BMP280_I2C) += bmp280-i2c.o
 obj-$(CONFIG_BMP280_SPI) += bmp280-spi.o
+obj-$(CONFIG_DLHL60D) += dlhl60d.o
 obj-$(CONFIG_DPS310) += dps310.o
 obj-$(CONFIG_IIO_CROS_EC_BARO) += cros_ec_baro.o
 obj-$(CONFIG_HID_SENSOR_PRESS)   += hid-sensor-press.o
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 3109c8e2cc11..8b03ea15c0d0 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -1,8 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 #include <linux/module.h>
 #include <linux/i2c.h>
-#include <linux/acpi.h>
-#include <linux/of.h>
 #include <linux/regmap.h>
 
 #include "bmp280.h"
@@ -38,16 +36,6 @@ static int bmp280_i2c_probe(struct i2c_client *client,
 				   client->irq);
 }
 
-static const struct acpi_device_id bmp280_acpi_i2c_match[] = {
-	{"BMP0280", BMP280_CHIP_ID },
-	{"BMP0180", BMP180_CHIP_ID },
-	{"BMP0085", BMP180_CHIP_ID },
-	{"BME0280", BME280_CHIP_ID },
-	{ },
-};
-MODULE_DEVICE_TABLE(acpi, bmp280_acpi_i2c_match);
-
-#ifdef CONFIG_OF
 static const struct of_device_id bmp280_of_i2c_match[] = {
 	{ .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
 	{ .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
@@ -56,9 +44,6 @@ static const struct of_device_id bmp280_of_i2c_match[] = {
 	{ },
 };
 MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
-#else
-#define bmp280_of_i2c_match NULL
-#endif
 
 static const struct i2c_device_id bmp280_i2c_id[] = {
 	{"bmp280", BMP280_CHIP_ID },
@@ -72,8 +57,7 @@ MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
 static struct i2c_driver bmp280_i2c_driver = {
 	.driver = {
 		.name	= "bmp280",
-		.acpi_match_table = ACPI_PTR(bmp280_acpi_i2c_match),
-		.of_match_table = of_match_ptr(bmp280_of_i2c_match),
+		.of_match_table = bmp280_of_i2c_match,
 		.pm = &bmp280_dev_pm_ops,
 	},
 	.probe		= bmp280_i2c_probe,
diff --git a/drivers/iio/pressure/dlhl60d.c b/drivers/iio/pressure/dlhl60d.c
new file mode 100644
index 000000000000..b8c99e7bd6cf
--- /dev/null
+++ b/drivers/iio/pressure/dlhl60d.c
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * All Sensors DLH series low voltage digital pressure sensors
+ *
+ * Copyright (c) 2019 AVL DiTEST GmbH
+ *   Tomislav Denis <tomislav.denis@avl.com>
+ *
+ * Datasheet: http://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <asm/unaligned.h>
+
+/* Commands */
+#define DLH_START_SINGLE    0xAA
+
+/* Status bits */
+#define DLH_STATUS_OK       0x40
+
+/* DLH  data format */
+#define DLH_NUM_READ_BYTES  7
+#define DLH_NUM_DATA_BYTES  3
+#define DLH_NUM_PR_BITS     24
+#define DLH_NUM_TEMP_BITS   24
+
+/* DLH  timings */
+#define DLH_SINGLE_DUT_MS   5
+
+enum dhl_ids {
+	dlhl60d,
+	dlhl60g,
+};
+
+struct dlh_info {
+	u8 osdig;           /* digital offset factor */
+	unsigned int fss;   /* full scale span (inch H2O) */
+};
+
+struct dlh_state {
+	struct i2c_client *client;
+	struct dlh_info info;
+	bool use_interrupt;
+	struct completion completion;
+	u8 rx_buf[DLH_NUM_READ_BYTES] ____cacheline_aligned;
+};
+
+static struct dlh_info dlh_info_tbl[] = {
+	[dlhl60d] = {
+		.osdig = 2,
+		.fss = 120,
+	},
+	[dlhl60g] = {
+		.osdig = 10,
+		.fss = 60,
+	},
+};
+
+
+static int dlh_cmd_start_single(struct dlh_state *st)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte(st->client, DLH_START_SINGLE);
+	if (ret)
+		dev_err(&st->client->dev,
+			"%s: I2C write byte failed\n", __func__);
+
+	return ret;
+}
+
+static int dlh_cmd_read_data(struct dlh_state *st)
+{
+	int ret;
+
+	ret = i2c_master_recv(st->client, st->rx_buf, DLH_NUM_READ_BYTES);
+	if (ret < 0) {
+		dev_err(&st->client->dev,
+			"%s: I2C read block failed\n", __func__);
+		return ret;
+	}
+
+	if (st->rx_buf[0] != DLH_STATUS_OK) {
+		dev_err(&st->client->dev,
+			"%s: invalid status 0x%02x\n", __func__, st->rx_buf[0]);
+		return -EBUSY;
+	}
+
+	return 0;
+}
+
+static int dlh_start_capture_and_read(struct dlh_state *st)
+{
+	int ret;
+
+	if (st->use_interrupt)
+		reinit_completion(&st->completion);
+
+	ret = dlh_cmd_start_single(st);
+	if (ret)
+		return ret;
+
+	if (st->use_interrupt) {
+		ret = wait_for_completion_timeout(&st->completion,
+			msecs_to_jiffies(DLH_SINGLE_DUT_MS));
+		if (!ret) {
+			dev_err(&st->client->dev,
+				"%s: conversion timed out\n", __func__);
+			return -ETIMEDOUT;
+		}
+	} else {
+		mdelay(DLH_SINGLE_DUT_MS);
+	}
+
+	return dlh_cmd_read_data(st);
+}
+
+static int dlh_read_direct(struct dlh_state *st,
+	unsigned int *pressure, unsigned int *temperature)
+{
+	int ret;
+
+	ret = dlh_start_capture_and_read(st);
+	if (ret)
+		return ret;
+
+	*pressure = get_unaligned_be32(&st->rx_buf[1]) >> 8;
+	*temperature = get_unaligned_be32(&st->rx_buf[3]) &
+		GENMASK(DLH_NUM_TEMP_BITS - 1, 0);
+
+	return 0;
+}
+
+static int dlh_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *channel, int *value,
+	int *value2, long mask)
+{
+	struct dlh_state *st = iio_priv(indio_dev);
+	unsigned int pressure, temperature;
+	int ret;
+	s64 tmp;
+	s32 rem;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = dlh_read_direct(st, &pressure, &temperature);
+		iio_device_release_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		switch (channel->type) {
+		case IIO_PRESSURE:
+			*value = pressure;
+			return IIO_VAL_INT;
+
+		case IIO_TEMP:
+			*value = temperature;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (channel->type) {
+		case IIO_PRESSURE:
+			tmp = div_s64(125LL * st->info.fss * 24909 * 100,
+				1 << DLH_NUM_PR_BITS);
+			tmp = div_s64_rem(tmp, 1000000000LL, &rem);
+			*value = tmp;
+			*value2 = rem;
+			return IIO_VAL_INT_PLUS_NANO;
+
+		case IIO_TEMP:
+			*value = 125 * 1000;
+			*value2 = DLH_NUM_TEMP_BITS;
+			return IIO_VAL_FRACTIONAL_LOG2;
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		switch (channel->type) {
+		case IIO_PRESSURE:
+			*value = -125 * st->info.fss * 24909;
+			*value2 = 100 * st->info.osdig * 100000;
+			return IIO_VAL_FRACTIONAL;
+
+		case IIO_TEMP:
+			*value = -40 * 1000;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info dlh_info = {
+	.read_raw = dlh_read_raw,
+};
+
+static const struct iio_chan_spec dlh_channels[] = {
+	{
+		.type = IIO_PRESSURE,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = DLH_NUM_PR_BITS,
+			.storagebits = 32,
+			.shift = 8,
+			.endianness = IIO_BE,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type =
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = DLH_NUM_TEMP_BITS,
+			.storagebits = 32,
+			.shift = 8,
+			.endianness = IIO_BE,
+		},
+	}
+};
+
+static irqreturn_t dlh_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct dlh_state *st = iio_priv(indio_dev);
+	int ret;
+	unsigned int chn, i = 0;
+	__be32 tmp_buf[2];
+
+	ret = dlh_start_capture_and_read(st);
+	if (ret)
+		goto out;
+
+	for_each_set_bit(chn, indio_dev->active_scan_mask,
+		indio_dev->masklength) {
+		memcpy(tmp_buf + i,
+			&st->rx_buf[1] + chn * DLH_NUM_DATA_BYTES,
+			DLH_NUM_DATA_BYTES);
+		i++;
+	}
+
+	iio_push_to_buffers(indio_dev, tmp_buf);
+
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t dlh_interrupt(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct dlh_state *st = iio_priv(indio_dev);
+
+	complete(&st->completion);
+
+	return IRQ_HANDLED;
+};
+
+static int dlh_probe(struct i2c_client *client,
+	const struct i2c_device_id *id)
+{
+	struct dlh_state *st;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+		I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE)) {
+		dev_err(&client->dev,
+			"adapter doesn't support required i2c functionality\n");
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+	if (!indio_dev) {
+		dev_err(&client->dev, "failed to allocate iio device\n");
+		return -ENOMEM;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+
+	st = iio_priv(indio_dev);
+	st->info = dlh_info_tbl[id->driver_data];
+	st->client = client;
+	st->use_interrupt = false;
+
+	indio_dev->name = id->name;
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->dev.of_node = client->dev.of_node;
+	indio_dev->info = &dlh_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels =  dlh_channels;
+	indio_dev->num_channels = ARRAY_SIZE(dlh_channels);
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+			dlh_interrupt, NULL,
+			IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+			id->name, indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "failed to allocate threaded irq");
+			return ret;
+		}
+
+		st->use_interrupt = true;
+		init_completion(&st->completion);
+	}
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+		NULL, &dlh_trigger_handler, NULL);
+	if (ret) {
+		dev_err(&client->dev, "failed to setup iio buffer\n");
+		return ret;
+	}
+
+	ret = devm_iio_device_register(&client->dev, indio_dev);
+	if (ret)
+		dev_err(&client->dev, "failed to register iio device\n");
+
+	return ret;
+}
+
+static const struct of_device_id dlh_of_match[] = {
+	{ .compatible = "asc,dlhl60d" },
+	{ .compatible = "asc,dlhl60g" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, dlh_of_match);
+
+static const struct i2c_device_id dlh_id[] = {
+	{ "dlhl60d",    dlhl60d },
+	{ "dlhl60g",    dlhl60g },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, dlh_id);
+
+static struct i2c_driver dlh_driver = {
+	.driver = {
+		.name = "dlhl60d",
+		.of_match_table = dlh_of_match,
+	},
+	.probe = dlh_probe,
+	.id_table = dlh_id,
+};
+module_i2c_driver(dlh_driver);
+
+MODULE_AUTHOR("Tomislav Denis <tomislav.denis@avl.com>");
+MODULE_DESCRIPTION("Driver for All Sensors DLH series pressure sensors");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/pressure/st_pressure.h b/drivers/iio/pressure/st_pressure.h
index c2e47a6c3118..5c746ff6087e 100644
--- a/drivers/iio/pressure/st_pressure.h
+++ b/drivers/iio/pressure/st_pressure.h
@@ -37,7 +37,7 @@ enum st_press_type {
  * struct st_sensors_platform_data - default press platform data
  * @drdy_int_pin: default press DRDY is available on INT1 pin.
  */
-static const struct st_sensors_platform_data default_press_pdata = {
+static __maybe_unused const struct st_sensors_platform_data default_press_pdata = {
 	.drdy_int_pin = 1,
 };
 
diff --git a/drivers/iio/pressure/st_pressure_i2c.c b/drivers/iio/pressure/st_pressure_i2c.c
index 71d2ed6b4948..09c6903f99b8 100644
--- a/drivers/iio/pressure/st_pressure_i2c.c
+++ b/drivers/iio/pressure/st_pressure_i2c.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <linux/acpi.h>
 #include <linux/i2c.h>
 #include <linux/iio/iio.h>
 
@@ -18,7 +17,6 @@
 #include <linux/iio/common/st_sensors_i2c.h>
 #include "st_pressure.h"
 
-#ifdef CONFIG_OF
 static const struct of_device_id st_press_of_match[] = {
 	{
 		.compatible = "st,lps001wp-press",
@@ -51,9 +49,6 @@ static const struct of_device_id st_press_of_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
-#else
-#define st_press_of_match NULL
-#endif
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id st_press_acpi_match[] = {
@@ -61,8 +56,6 @@ static const struct acpi_device_id st_press_acpi_match[] = {
 	{ },
 };
 MODULE_DEVICE_TABLE(acpi, st_press_acpi_match);
-#else
-#define st_press_acpi_match NULL
 #endif
 
 static const struct i2c_device_id st_press_id_table[] = {
@@ -85,18 +78,7 @@ static int st_press_i2c_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int ret;
 
-	if (client->dev.of_node) {
-		st_sensors_of_name_probe(&client->dev, st_press_of_match,
-					 client->name, sizeof(client->name));
-	} else if (ACPI_HANDLE(&client->dev)) {
-		ret = st_sensors_match_acpi_device(&client->dev);
-		if ((ret < 0) || (ret >= ST_PRESS_MAX))
-			return -ENODEV;
-
-		strlcpy(client->name, st_press_id_table[ret].name,
-			sizeof(client->name));
-	} else if (!id)
-		return -ENODEV;
+	st_sensors_dev_name_probe(&client->dev, client->name, sizeof(client->name));
 
 	settings = st_press_get_settings(client->name);
 	if (!settings) {
@@ -133,7 +115,7 @@ static int st_press_i2c_remove(struct i2c_client *client)
 static struct i2c_driver st_press_driver = {
 	.driver = {
 		.name = "st-press-i2c",
-		.of_match_table = of_match_ptr(st_press_of_match),
+		.of_match_table = st_press_of_match,
 		.acpi_match_table = ACPI_PTR(st_press_acpi_match),
 	},
 	.probe = st_press_i2c_probe,
diff --git a/drivers/iio/pressure/st_pressure_spi.c b/drivers/iio/pressure/st_pressure_spi.c
index 7c8b70221e70..b5ee3ec2764f 100644
--- a/drivers/iio/pressure/st_pressure_spi.c
+++ b/drivers/iio/pressure/st_pressure_spi.c
@@ -17,7 +17,6 @@
 #include <linux/iio/common/st_sensors_spi.h>
 #include "st_pressure.h"
 
-#ifdef CONFIG_OF
 /*
  * For new single-chip sensors use <device_name> as compatible string.
  * For old single-chip devices keep <device_name>-press to maintain
@@ -55,9 +54,6 @@ static const struct of_device_id st_press_of_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_press_of_match);
-#else
-#define st_press_of_match	NULL
-#endif
 
 static int st_press_spi_probe(struct spi_device *spi)
 {
@@ -66,8 +62,7 @@ static int st_press_spi_probe(struct spi_device *spi)
 	struct iio_dev *indio_dev;
 	int err;
 
-	st_sensors_of_name_probe(&spi->dev, st_press_of_match,
-				 spi->modalias, sizeof(spi->modalias));
+	st_sensors_dev_name_probe(&spi->dev, spi->modalias, sizeof(spi->modalias));
 
 	settings = st_press_get_settings(spi->modalias);
 	if (!settings) {
@@ -116,7 +111,7 @@ MODULE_DEVICE_TABLE(spi, st_press_id_table);
 static struct spi_driver st_press_driver = {
 	.driver = {
 		.name = "st-press-spi",
-		.of_match_table = of_match_ptr(st_press_of_match),
+		.of_match_table = st_press_of_match,
 	},
 	.probe = st_press_spi_probe,
 	.remove = st_press_spi_remove,