diff options
Diffstat (limited to '')
-rw-r--r-- | drivers/media/cec/cec-adap.c | 141 |
1 files changed, 101 insertions, 40 deletions
diff --git a/drivers/media/cec/cec-adap.c b/drivers/media/cec/cec-adap.c index f1261cc2b6fa..451c61bde4d4 100644 --- a/drivers/media/cec/cec-adap.c +++ b/drivers/media/cec/cec-adap.c @@ -16,7 +16,10 @@ #include <linux/string.h> #include <linux/types.h> +#include <drm/drm_connector.h> +#include <drm/drm_device.h> #include <drm/drm_edid.h> +#include <drm/drm_file.h> #include "cec-priv.h" @@ -75,6 +78,16 @@ u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, } EXPORT_SYMBOL_GPL(cec_get_edid_phys_addr); +void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, + const struct drm_connector *connector) +{ + memset(conn_info, 0, sizeof(*conn_info)); + conn_info->type = CEC_CONNECTOR_TYPE_DRM; + conn_info->drm.card_no = connector->dev->primary->index; + conn_info->drm.connector_id = connector->base.id; +} +EXPORT_SYMBOL_GPL(cec_fill_conn_info_from_drm); + /* * Queue a new event for this filehandle. If ts == 0, then set it * to the current time. @@ -720,6 +733,7 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, struct cec_fh *fh, bool block) { struct cec_data *data; + bool is_raw = msg_is_raw(msg); msg->rx_ts = 0; msg->tx_ts = 0; @@ -735,15 +749,10 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, /* Make sure the timeout isn't 0. */ msg->timeout = 1000; } - if (msg->timeout) - msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS; - else - msg->flags = 0; + msg->flags &= CEC_MSG_FL_REPLY_TO_FOLLOWERS | CEC_MSG_FL_RAW; - if (msg->len > 1 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) { - msg->msg[2] = adap->phys_addr >> 8; - msg->msg[3] = adap->phys_addr & 0xff; - } + if (!msg->timeout) + msg->flags &= ~CEC_MSG_FL_REPLY_TO_FOLLOWERS; /* Sanity checks */ if (msg->len == 0 || msg->len > CEC_MAX_MSG_SIZE) { @@ -765,44 +774,80 @@ int cec_transmit_msg_fh(struct cec_adapter *adap, struct cec_msg *msg, dprintk(1, "%s: can't reply to poll msg\n", __func__); return -EINVAL; } - if (msg->len == 1) { - if (cec_msg_destination(msg) == 0xf) { - dprintk(1, "%s: invalid poll message\n", __func__); + + if (is_raw) { + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + } else { + /* A CDC-Only device can only send CDC messages */ + if ((adap->log_addrs.flags & CEC_LOG_ADDRS_FL_CDC_ONLY) && + (msg->len == 1 || msg->msg[1] != CEC_MSG_CDC_MESSAGE)) { + dprintk(1, "%s: not a CDC message\n", __func__); return -EINVAL; } - if (cec_has_log_addr(adap, cec_msg_destination(msg))) { - /* - * If the destination is a logical address our adapter - * has already claimed, then just NACK this. - * It depends on the hardware what it will do with a - * POLL to itself (some OK this), so it is just as - * easy to handle it here so the behavior will be - * consistent. - */ - msg->tx_ts = ktime_get_ns(); - msg->tx_status = CEC_TX_STATUS_NACK | - CEC_TX_STATUS_MAX_RETRIES; - msg->tx_nack_cnt = 1; - msg->sequence = ++adap->sequence; - if (!msg->sequence) + + if (msg->len >= 4 && msg->msg[1] == CEC_MSG_CDC_MESSAGE) { + msg->msg[2] = adap->phys_addr >> 8; + msg->msg[3] = adap->phys_addr & 0xff; + } + + if (msg->len == 1) { + if (cec_msg_destination(msg) == 0xf) { + dprintk(1, "%s: invalid poll message\n", + __func__); + return -EINVAL; + } + if (cec_has_log_addr(adap, cec_msg_destination(msg))) { + /* + * If the destination is a logical address our + * adapter has already claimed, then just NACK + * this. It depends on the hardware what it will + * do with a POLL to itself (some OK this), so + * it is just as easy to handle it here so the + * behavior will be consistent. + */ + msg->tx_ts = ktime_get_ns(); + msg->tx_status = CEC_TX_STATUS_NACK | + CEC_TX_STATUS_MAX_RETRIES; + msg->tx_nack_cnt = 1; msg->sequence = ++adap->sequence; - return 0; + if (!msg->sequence) + msg->sequence = ++adap->sequence; + return 0; + } + } + if (msg->len > 1 && !cec_msg_is_broadcast(msg) && + cec_has_log_addr(adap, cec_msg_destination(msg))) { + dprintk(1, "%s: destination is the adapter itself\n", + __func__); + return -EINVAL; + } + if (msg->len > 1 && adap->is_configured && + !cec_has_log_addr(adap, cec_msg_initiator(msg))) { + dprintk(1, "%s: initiator has unknown logical address %d\n", + __func__, cec_msg_initiator(msg)); + return -EINVAL; + } + /* + * Special case: allow Ping and IMAGE/TEXT_VIEW_ON to be + * transmitted to a TV, even if the adapter is unconfigured. + * This makes it possible to detect or wake up displays that + * pull down the HPD when in standby. + */ + if (!adap->is_configured && !adap->is_configuring && + (msg->len > 2 || + cec_msg_destination(msg) != CEC_LOG_ADDR_TV || + (msg->len == 2 && msg->msg[1] != CEC_MSG_IMAGE_VIEW_ON && + msg->msg[1] != CEC_MSG_TEXT_VIEW_ON))) { + dprintk(1, "%s: adapter is unconfigured\n", __func__); + return -ENONET; } } - if (msg->len > 1 && !cec_msg_is_broadcast(msg) && - cec_has_log_addr(adap, cec_msg_destination(msg))) { - dprintk(1, "%s: destination is the adapter itself\n", __func__); - return -EINVAL; - } - if (msg->len > 1 && adap->is_configured && - !cec_has_log_addr(adap, cec_msg_initiator(msg))) { - dprintk(1, "%s: initiator has unknown logical address %d\n", - __func__, cec_msg_initiator(msg)); - return -EINVAL; - } + if (!adap->is_configured && !adap->is_configuring) { - if (adap->needs_hpd || msg->msg[0] != 0xf0) { - dprintk(1, "%s: adapter is unconfigured\n", __func__); + if (adap->needs_hpd) { + dprintk(1, "%s: adapter is unconfigured and needs HPD\n", + __func__); return -ENONET; } if (msg->reply) { @@ -1566,6 +1611,22 @@ void cec_s_phys_addr_from_edid(struct cec_adapter *adap, } EXPORT_SYMBOL_GPL(cec_s_phys_addr_from_edid); +void cec_s_conn_info(struct cec_adapter *adap, + const struct cec_connector_info *conn_info) +{ + if (!(adap->capabilities & CEC_CAP_CONNECTOR_INFO)) + return; + + mutex_lock(&adap->lock); + if (conn_info) + adap->conn_info = *conn_info; + else + memset(&adap->conn_info, 0, sizeof(adap->conn_info)); + cec_post_state_event(adap); + mutex_unlock(&adap->lock); +} +EXPORT_SYMBOL_GPL(cec_s_conn_info); + /* * Called from either the ioctl or a driver to set the logical addresses. * |