| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Follow the convention already in use by other platforms on naming the
sof_dev_desc struct by dropping the underscore between adl and n
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240603072544.5215-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| |
|
|
|
|
|
|
|
|
| |
The "ADC2_BCS Disable Switch" control does basically nothing: sets field
in driver's private data structure which is never read again to
configure hardware. Drop the control as it has no effect.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523124808.42923-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| |
|
|
|
|
|
|
|
|
| |
All four microphone bias registers have similar layout: VOUT control
mask is exactly the same. Use one define, just like older driver
wcd938x is doing, to make the code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240523125049.43713-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
| |\
| |
| |
| | |
We need this to get the i.MX platforms working in CI again.
|
| | | |
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Niklas Cassel:
- Add a quirk for three different devices that have shown issues with
LPM (link power management). These devices appear to not implement
LPM properly, since we see command timeouts when enabling LPM. The
quirk disables LPM for these problematic devices. (Me)
- Do not apply the Intel PCS quirk on Alder Lake. The quirk is not
needed and was originally added by mistake when LPM support was
enabled for this AHCI controller. Enabling the quirk when not needed
causes the the controller to not be able to detect the connected
devices on some platforms.
* tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340
ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD
ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1
ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Apacer AS340 drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Tim Teichmann <teichmanntim@outlook.de>
Closes: https://lore.kernel.org/linux-ide/87bk4pbve8.ffs@tglx/
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that AMD Radeon S3 SSD drives do not handle low power modes
correctly. The problem was most likely not seen before because no one
had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support both
HIPM and DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Doru Iorgulescu <doru.iorgulescu1@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit 7627a0edef54 ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Aarrayy <lp610mh@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Commit b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller
to low power chipsets list") added Intel Alder Lake to the ahci_pci_tbl.
Because of the way that the Intel PCS quirk was implemented, having
an explicit entry in the ahci_pci_tbl caused the Intel PCS quirk to
be applied. (The quirk was not being applied if there was no explict
entry.)
Thus, entries that were added to the ahci_pci_tbl also got the Intel
PCS quirk applied.
The quirk was cleaned up in commit 7edbb6059274 ("ahci: clean up
intel_pcs_quirk"), such that it is clear which entries that actually
applies the Intel PCS quirk.
Newer Intel AHCI controllers do not need the Intel PCS quirk,
and applying it when not needed actually breaks some platforms.
Do not apply the Intel PCS quirk for Intel Alder Lake.
This is in line with how things worked before commit b8b8b4e0c052 ("ata:
ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list"),
such that certain platforms using Intel Alder Lake will work once again.
Cc: stable@vger.kernel.org # 6.7
Fixes: b8b8b4e0c052 ("ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list")
Signed-off-by: Jason Nader <dev@kayoway.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Miscellaneous topology parsing fixes:
- Fix topology parsing regression on older CPUs in the new AMD/Hygon
parser
- Fix boot crash on odd Intel Quark and similar CPUs that do not fill
out cpuinfo_x86::x86_clflush_size and zero out
cpuinfo_x86::x86_cache_alignment as a result.
Provide 32 bytes as a general fallback value.
- Fix topology enumeration on certain rare CPUs where the BIOS locks
certain CPUID leaves and the kernel unlocked them late, which broke
with the new topology parsing code. Factor out this unlocking logic
and move it earlier in the parsing sequence"
* tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/intel: Unlock CPUID before evaluating anything
x86/cpu: Provide default cache line size if not enumerated
x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c35e ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
will end up reporting cache_line_size()==0 and bad things happen.
Fill in a default on those to avoid the problem.
Long Story:
The kernel dies a horrible death if c->x86_cache_alignment (aka.
cache_line_size() is 0. Normally, this value is populated from
c->x86_clflush_size.
Right now the code is set up to get c->x86_clflush_size from two
places. First, modern CPUs get it from CPUID. Old CPUs that don't
have leaf 0x80000008 (or CPUID at all) just get some sane defaults
from the kernel in get_cpu_address_sizes().
The vast majority of CPUs that have leaf 0x80000008 also get
->x86_clflush_size from CPUID. But there are oddballs.
Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
if (cap0 & (1<<19))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
So they: land in get_cpu_address_sizes() and see that CPUID has level
0x80000008 and jump into the side of the if() that does not fill in
c->x86_clflush_size. That assigns a 0 to c->x86_cache_alignment, and
hilarity ensues in code like:
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
GFP_KERNEL);
To fix this, always provide a sane value for ->x86_clflush_size.
Big thanks to Andy Shevchenko for finding and reporting this and also
providing a first pass at a fix. But his fix was only partial and only
worked on the Quark CPUs. It would not, for instance, have worked on
the QEMU config.
1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
2. You can also get this behavior if you use "-cpu 486,+clzero"
in QEMU.
[ dhansen: remove 'vp_bits_from_cpuid' reference in changelog
because bpetkov brutally murdered it recently. ]
Fixes: fbf6449f84bf ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Jörn Heusipp <osmanx@heusipp.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240516173928.3960193-1-andriy.shevchenko@linux.intel.com/
Link: https://lore.kernel.org/lkml/5e31cad3-ad4d-493e-ab07-724cfbfaba44@heusipp.de/
Link: https://lore.kernel.org/all/20240517200534.8EC5F33E%40davehans-spike.ostc.intel.com
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
and greater
The new AMD/HYGON topology parser evaluates the SMT information in CPUID leaf
0x8000001e unconditionally while the original code restricted it to CPUs with
family 0x17 and greater.
This breaks family 0x15 CPUs which advertise that leaf and have a non-zero
value in the SMT section. The machine boots, but the scheduler complains loudly
about the mismatch of the core IDs:
WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6482 sched_cpu_starting+0x183/0x250
WARNING: CPU: 0 PID: 1 at kernel/sched/topology.c:2408 build_sched_domains+0x76b/0x12b0
Add the condition back to cure it.
[ bp: Make it actually build because grandpa is not concerned with
trivial stuff. :-P ]
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Closes: https://gitlab.archlinux.org/archlinux/packaging/packages/linux/-/issues/56
Reported-by: Tim Teichmann <teichmanntim@outlook.de>
Reported-by: Christian Heusel <christian@heusel.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Tim Teichmann <teichmanntim@outlook.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/7skhx6mwe4hxiul64v6azhlxnokheorksqsdbp7qw6g2jduf6c@7b5pvomauugk
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"Export a symbol to make life easier for instrumentation/debugging"
* tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/x86: Export 'percpu arch_freq_scale'
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Commit:
7bc263840bc3 ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240530181548.2039216-1-pauld@redhat.com
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Add missing MODULE_DESCRIPTION() lines"
* tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add missing MODULE_DESCRIPTION() lines
perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Fix the 'make W=1 C=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/intel/intel-uncore.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/intel/intel-cstate.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-intel-v1-1-8252194ed20a@quicinc.com
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-v1-1-e45ffa8af99f@quicinc.com
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- scsi: mpt3sas: Avoid possible run-time warning with long manufacturer
strings
- mailmap: update entry for Kees Cook
- kunit/fortify: Remove __kmalloc_node() test
* tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kunit/fortify: Remove __kmalloc_node() test
mailmap: update entry for Kees Cook
scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
__kmalloc_node() is considered an "internal" function to the Slab, so
drop it from explicit testing.
Link: https://lore.kernel.org/r/20240531185703.work.588-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
I'm tired of gmail breaking DKIM. Switch everything over to my
@kernel.org alias instead.
Signed-off-by: Kees Cook <kees@kernel.org>
|
| | | | |_|/
| | |/| |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The prior strscpy() replacement of strncpy() here expected the
manufacture_reply strings to be NUL-terminated, but it is possible
they are not, as the code pattern here shows, e.g., edev->vendor_id
being exactly 1 character larger than manufacture_reply->vendor_id,
and the replaced strncpy() was copying only up to the size of the
source character array. Replace this with memtostr(), which is the
unambiguous way to convert a maybe not-NUL-terminated character array
into a NUL-terminated string.
Fixes: b7e9712a02e8 ("scsi: mpt3sas: Replace deprecated strncpy() with strscpy()")
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Marco Patalano <mpatalan@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240410023155.2100422-3-keescook@chromium.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Enforce full ordering for ATOMIC operations with BPF_FETCH
- Fix uaccess build errors seen with GCC 13/14
- Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT
- Drop error message from lparcfg guest name lookup
Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao,
Puranjay Mohan, and Samuel Holland.
* tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64
powerpc/uaccess: Use YZ asm constraint for ld
powerpc/uaccess: Fix build errors seen with GCC 13/14
powerpc/pseries/lparcfg: drop error message from guest name lookup
powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When building a 32-bit kernel, some toolchains do not allow mixing soft
float and hard float object files:
LD vmlinux.o
powerpc64le-unknown-linux-musl-ld: lib/test_fpu_impl.o uses hard float, arch/powerpc/kernel/udbg.o uses soft float
powerpc64le-unknown-linux-musl-ld: failed to merge target specific data of file lib/test_fpu_impl.o
make[2]: *** [scripts/Makefile.vmlinux_o:62: vmlinux.o] Error 1
make[1]: *** [Makefile:1152: vmlinux_o] Error 2
make: *** [Makefile:240: __sub-make] Error 2
This is not an issue when building a 64-bit kernel. To unbreak the
build, limit ARCH_HAS_KERNEL_FPU_SUPPORT to 64-bit kernels. This is okay
because the only real user of this option, amdgpu, was previously
limited to PPC64 anyway; see commit a28e4b672f04 ("drm/amd/display: use
ARCH_HAS_KERNEL_FPU_SUPPORT").
Fixes: 01db473e1aa3 ("powerpc: implement ARCH_HAS_KERNEL_FPU_SUPPORT")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405250851.Z4daYSWG-lkp@intel.com/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/eeffaec3-df63-4e55-ab7a-064a65c00efa@roeck-us.net/
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529162852.1209-1-samuel.holland@sifive.com
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The 'ld' instruction requires a 4-byte aligned displacement because it
is a DS-form instruction. But the "m" asm constraint doesn't enforce
that.
Add a special case of __get_user_asm2_goto() so that the "YZ" constraint
can be used for "ld".
The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "ld" or X-form "ldx" as appropriate.
The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.
No build errors have been reported due to this, but the possibility is
there depending on compiler code generation decisions.
Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529123029.146953-2-mpe@ellerman.id.au
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Building ppc64le_defconfig with GCC 14 fails with assembler errors:
CC fs/readdir.o
/tmp/ccdQn0mD.s: Assembler messages:
/tmp/ccdQn0mD.s:212: Error: operand out of domain (18 is not a multiple of 4)
/tmp/ccdQn0mD.s:226: Error: operand out of domain (18 is not a multiple of 4)
... [6 lines]
/tmp/ccdQn0mD.s:1699: Error: operand out of domain (18 is not a multiple of 4)
A snippet of the asm shows:
# ../fs/readdir.c:210: unsafe_copy_dirent_name(dirent->d_name, name, namlen, efault_end);
ld 9,0(29) # MEM[(u64 *)name_38(D) + _88 * 1], MEM[(u64 *)name_38(D) + _88 * 1]
# 210 "../fs/readdir.c" 1
1: std 9,18(8) # put_user # *__pus_addr_52, MEM[(u64 *)name_38(D) + _88 * 1]
The 'std' instruction requires a 4-byte aligned displacement because
it is a DS-form instruction, and as the assembler says, 18 is not a
multiple of 4.
A similar error is seen with GCC 13 and CONFIG_UBSAN_SIGNED_WRAP=y.
The fix is to change the constraint on the memory operand to put_user(),
from "m" which is a general memory reference to "YZ".
The "Z" constraint is documented in the GCC manual PowerPC machine
constraints, and specifies a "memory operand accessed with indexed or
indirect addressing". "Y" is not documented in the manual but specifies
a "memory operand for a DS-form instruction". Using both allows the
compiler to generate a DS-form "std" or X-form "stdx" as appropriate.
The change has to be conditional on CONFIG_PPC_KERNEL_PREFIXED because
the "Y" constraint does not guarantee 4-byte alignment when prefixed
instructions are enabled.
Unfortunately clang doesn't support the "Y" constraint so that has to be
behind an ifdef.
Although the build error is only seen with GCC 13/14, that appears
to just be luck. The constraint has been incorrect since it was first
added.
Fixes: c20beffeec3c ("powerpc/uaccess: Use flexible addressing with __put_user()/__get_user()")
Cc: stable@vger.kernel.org # v5.10+
Suggested-by: Kewen Lin <linkw@gcc.gnu.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240529123029.146953-1-mpe@ellerman.id.au
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
It's not an error or exceptional situation when the hosting
environment does not expose a name for the LP/guest via RTAS or the
device tree. This happens with qemu when run without the '-name'
option. The message also lacks a newline. Remove it.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: eddaa9a40275 ("powerpc/pseries: read the lpar name from the firmware")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240524-lparcfg-updates-v2-1-62e2e9d28724@linux.ibm.com
|
| | | |/ / /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The Linux Kernel Memory Model [1][2] requires RMW operations that have a
return value to be fully ordered.
BPF atomic operations with BPF_FETCH (including BPF_XCHG and
BPF_CMPXCHG) return a value back so they need to be JITed to fully
ordered operations. POWERPC currently emits relaxed operations for
these.
We can show this by running the following litmus-test:
PPC SB+atomic_add+fetch
{
0:r0=x; (* dst reg assuming offset is 0 *)
0:r1=2; (* src reg *)
0:r2=1;
0:r4=y; (* P0 writes to this, P1 reads this *)
0:r5=z; (* P1 writes to this, P0 reads this *)
0:r6=0;
1:r2=1;
1:r4=y;
1:r5=z;
}
P0 | P1 ;
stw r2, 0(r4) | stw r2,0(r5) ;
| ;
loop:lwarx r3, r6, r0 | ;
mr r8, r3 | ;
add r3, r3, r1 | sync ;
stwcx. r3, r6, r0 | ;
bne loop | ;
mr r1, r8 | ;
| ;
lwa r7, 0(r5) | lwa r7,0(r4) ;
~exists(0:r7=0 /\ 1:r7=0)
Witnesses
Positive: 9 Negative: 3
Condition ~exists (0:r7=0 /\ 1:r7=0)
Observation SB+atomic_add+fetch Sometimes 3 9
This test shows that the older store in P0 is reordered with a newer
load to a different address. Although there is a RMW operation with
fetch between them. Adding a sync before and after RMW fixes the issue:
Witnesses
Positive: 9 Negative: 0
Condition ~exists (0:r7=0 /\ 1:r7=0)
Observation SB+atomic_add+fetch Never 0 9
[1] https://www.kernel.org/doc/Documentation/memory-barriers.txt
[2] https://www.kernel.org/doc/Documentation/atomic_t.txt
Fixes: aea7ef8a82c0 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations")
Fixes: 2d9206b22743 ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg")
Fixes: dbe6e2456fb0 ("powerpc/bpf/64: add support for atomic fetch operations")
Fixes: 1e82dfaa7819 ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240513100248.110535-1-puranjay@kernel.org
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"After merging a commit 1fffe7a34c89 ("script: modpost: emit a warning
when the description is missing"), MODULE_DESCRIPTOR seems to be
mandatory for kernel modules. In FireWire subsystem, the most of
practical kernel modules have the field, while KUnit test modules do
not. A single patch is applied to fix them"
* tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: add missing MODULE_DESCRIPTION() to test modules
|
| | | |/ / /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firewire/uapi-test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/firewire/packet-serdes-test.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240523-md-firewire-uapi-test-v1-1-6be5adcc3aed@quicinc.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Pull smb client fixes from Steve French:
"Two small smb3 fixes:
- Fix socket creation with sfu mount option (spotted by test generic/423)
- Minor cleanup: fix missing description in two files"
* tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix creating sockets when using sfu mount options
fs: smb: common: add missing MODULE_DESCRIPTION() macros
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
When running fstest generic/423 with sfu mount option, it
was being skipped due to inability to create sockets:
generic/423 [not run] cifs does not support mknod/mkfifo
which can also be easily reproduced with their af_unix tool:
./src/af_unix /mnt1/socket-two bind: Operation not permitted
Fix sfu mount option to allow creating and reporting sockets.
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
| | | |/ / /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_arc4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/smb/common/cifs_md4.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a Kconfig bug regarding comparisons to 'm' or 'n'
- Replace missed $(srctree)/$(src)
- Fix unneeded kallsyms step 3
- Remove incorrect "compatible" properties from image nodes in
image.fit
- Improve gen_kheaders.sh
- Fix 'make dt_binding_check'
- Clean up unnecessary code
* tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
dt-bindings: kbuild: Fix dt_binding_check on unconfigured build
kheaders: use `command -v` to test for existence of `cpio`
kheaders: explicitly define file modes for archived headers
scripts/make_fit: Drop fdt image entry compatible string
kbuild: remove a stale comment about cleaning in link-vmlinux.sh
kbuild: fix short log for AS in link-vmlinux.sh
kbuild: change scripts/mksysmap into sed script
kbuild: avoid unneeded kallsyms step 3
kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src)
kconfig: remove redundant check in expr_join_or()
kconfig: fix comparison to constant symbols, 'm', 'n'
kconfig: remove unused expr_is_no()
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The 'dt_binding_check' target shouldn't depend on the kernel
configuration, but it has since commit 604a57ba9781 ("dt-bindings:
kbuild: Add separate target/dependency for processed-schema.json").
That is because CHECK_DT_BINDING make variable was dropped, but
scripts/dtc/Makefile was missed. The CHECK_DTBS variable can be used
instead.
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Commit 13e1df09284d ("kheaders: explicitly validate existence of cpio
command") added an explicit check for `cpio` using `type`.
However, `type` in `dash` (which is used in some popular distributions
and base images as the shell script runner) prints the missing message
to standard output, and thus no error is printed:
$ bash -c 'type missing >/dev/null'
bash: line 1: type: missing: not found
$ dash -c 'type missing >/dev/null'
$
For instance, this issue may be seen by loongarch builders, given its
defconfig enables CONFIG_IKHEADERS since commit 9cc1df421f00 ("LoongArch:
Update Loongson-3 default config file").
Therefore, use `command -v` instead to have consistent behavior, and
take the chance to provide a more explicit error.
Fixes: 13e1df09284d ("kheaders: explicitly validate existence of cpio command")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
According to the FIT image source file format document found in U-boot [1]
and the split-out FIT image specification [2], under "'/images' node" ->
"Conditionally mandatory property", the "compatible" property is described
as "compatible method for loading image", i.e., not the compatible string
embedded in the FDT or used for matching.
Drop the compatible string from the fdt image entry node.
While at it also fix up a typo in the document section of output_dtb.
[1] U-boot source "doc/usage/fit/source_file_format.rst", or on the website:
https://docs.u-boot.org/en/latest/usage/fit/source_file_format.html
[2] https://github.com/open-source-firmware/flat-image-tree/blob/main/source/chapter2-source-file-format.rst
Fixes: 7a23b027ec17 ("arm64: boot: Support Flat Image Tree")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Remove the left-over of commit 51eb95e2da41 ("kbuild: Don't remove
link-vmlinux temporary files on exit/signal").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
In convention, short logs print the output file, not the input file.
Let's change the suffix for 'AS' since it assembles *.S into *.o.
[Before]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.o
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.o
LD vmlinux
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The previous commit removed the subshell execution from scripts/mksysmap,
which is now simple enough to become a sed script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Since commit 951bcae6c5a0 ("kallsyms: Avoid weak references for kallsyms
symbols"), the kallsyms step 3 always occurs.
You can compare the build logs.
[Before 951bcae6c5a0]
$ git checkout 951bcae6c5a0^
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD vmlinux
[After 951bcae6c5a0]
$ git checkout 951bcae6c5a0
$ make defconfig all
[ snip ]
LD .tmp_vmlinux.kallsyms1
NM .tmp_vmlinux.kallsyms1.syms
KSYMS .tmp_vmlinux.kallsyms1.S
AS .tmp_vmlinux.kallsyms1.S
LD .tmp_vmlinux.kallsyms2
NM .tmp_vmlinux.kallsyms2.syms
KSYMS .tmp_vmlinux.kallsyms2.S
AS .tmp_vmlinux.kallsyms2.S
LD .tmp_vmlinux.kallsyms3 # should not happen
NM .tmp_vmlinux.kallsyms3.syms # should not happen
KSYMS .tmp_vmlinux.kallsyms3.S # should not happen
AS .tmp_vmlinux.kallsyms3.S # should not happen
LD vmlinux
The resulting vmlinux is correct, but it always requires an additional
linking step.
The symbols produced by kallsyms are excluded from kallsyms itself
because they were previously missing in step 1. With those symbols
excluded, the symbol lists matched between step 1 and step 2,
eliminating the need for step 3. Now, this has a negative effect.
Since 951bcae6c5a0, the PROVIDE() directives provide the fallback
definitions, which are not trimmed from the sysbol list in step 1
because ${kallsymso_prev} is empty at this point.
In step 2, ${kallsymso_prev} is set, and the kallsyms_* symbols are
trimmed from the symbol list.
Due to the table size difference between step 1 and step 2 (the former
is larger due to the presence of kallsyms_*), step 3 is triggered.
Now that the kallsyms_* symbols are always linked, let's stop omitting
them from kallsyms. This avoids unnecessary step 3.
Fixes: 951bcae6c5a0 ("kallsyms: Avoid weak references for kallsyms symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Recently we went through the source tree and replaced
$(srctree)/$(src) w/ $(src). However, the gdb scripts Makefile had a
hidden $(srctree)/$(src) that looked like this:
$(abspath $(srctree))/$(src)
Because we missed that then my installed kernel had symlinks that
looked like this:
__init__.py ->
${INSTALL_DIR}/$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Let's also replace the midden $(abspath $(srctree))/$(src) with
$(src). Now:
__init__.py ->
$(INSTALL_DIR}/scripts/gdb/linux/__init__.py
Fixes: b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
The check for 'sym1 == sym2' is redundant here because it has already
been done a few lines above:
if (sym1 != sym2)
return NULL;
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Currently, comparisons to 'm' or 'n' result in incorrect output.
[Test Code]
config MODULES
def_bool y
modules
config A
def_tristate m
config B
def_bool A > n
CONFIG_B is unset, while CONFIG_B=y is expected.
The reason for the issue is because Kconfig compares the tristate values
as strings.
Currently, the .type fields in the constant symbol definitions,
symbol_{yes,mod,no} are unspecified, i.e., S_UNKNOWN.
When expr_calc_value() evaluates 'A > n', it checks the types of 'A' and
'n' to determine how to compare them.
The left-hand side, 'A', is a tristate symbol with a value of 'm', which
corresponds to a numeric value of 1. (Internally, 'y', 'm', and 'n' are
represented as 2, 1, and 0, respectively.)
The right-hand side, 'n', has an unknown type, so it is treated as the
string "n" during the comparison.
expr_calc_value() compares two values numerically only when both can
have numeric values. Otherwise, they are compared as strings.
symbol numeric value ASCII code
-------------------------------------
y 2 0x79
m 1 0x6d
n 0 0x6e
'm' is greater than 'n' if compared numerically (since 1 is greater
than 0), but smaller than 'n' if compared as strings (since the ASCII
code 0x6d is smaller than 0x6e).
Specifying .type=S_TRISTATE for symbol_{yes,mod,no} fixes the above
test code.
Doing so, however, would cause a regression to the following test code.
[Test Code 2]
config MODULES
def_bool n
modules
config A
def_tristate n
config B
def_bool A = m
You would get CONFIG_B=y, while CONFIG_B should not be set.
The reason is because sym_get_string_value() turns 'm' into 'n' when the
module feature is disabled. Consequently, expr_calc_value() evaluates
'A = n' instead of 'A = m'. This oddity has been hidden because the type
of 'm' was previously S_UNKNOWN instead of S_TRISTATE.
sym_get_string_value() should not tweak the string because the tristate
value has already been correctly calculated. There is no reason to
return the string "n" where its tristate value is mod.
Fixes: 31847b67bec0 ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | | |/ / /
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This has not been used since commit e911503085ae ("Kconfig: Remove
bad inference rules expr_eliminate_dups2()").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Pull xfs fixes from Chandan Babu:
- Fix a livelock by dropping an xfarray sortinfo folio when an error
is encountered
- During extended attribute operations, Initialize transaction
reservation computation based on attribute operation code
- Relax symbolic link's ondisk verification code to allow symbolic
links with short remote targets
- Prevent soft lockups when unmapping file ranges and also during
remapping blocks during a reflink operation
- Fix compilation warnings when XFS is built with W=1 option
* tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Add cond_resched to block unmap range and reflink remap path
xfs: don't open-code u64_to_user_ptr
xfs: allow symlinks with short remote targets
xfs: fix xfs_init_attr_trans not handling explicit operation codes
xfs: drop xfarray sortinfo folio on error
xfs: Stop using __maybe_unused in xfs_alloc.c
xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
An async dio write to a sparse file can generate a lot of extents
and when we unlink this file (using rm), the kernel can be busy in umapping
and freeing those extents as part of transaction processing.
Similarly xfs reflink remapping path can also iterate over a million
extent entries in xfs_reflink_remap_blocks().
Since we can busy loop in these two functions, so let's add cond_resched()
to avoid softlockup messages like these.
watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/1:0:82435]
CPU: 1 PID: 82435 Comm: kworker/1:0 Tainted: G S L 6.9.0-rc5-0-default #1
Workqueue: xfs-inodegc/sda2 xfs_inodegc_worker
NIP [c000000000beea10] xfs_extent_busy_trim+0x100/0x290
LR [c000000000bee958] xfs_extent_busy_trim+0x48/0x290
Call Trace:
xfs_alloc_get_rec+0x54/0x1b0 (unreliable)
xfs_alloc_compute_aligned+0x5c/0x144
xfs_alloc_ag_vextent_size+0x238/0x8d4
xfs_alloc_fix_freelist+0x540/0x694
xfs_free_extent_fix_freelist+0x84/0xe0
__xfs_free_extent+0x74/0x1ec
xfs_extent_free_finish_item+0xcc/0x214
xfs_defer_finish_one+0x194/0x388
xfs_defer_finish_noroll+0x1b4/0x5c8
xfs_defer_finish+0x2c/0xc4
xfs_bunmapi_range+0xa4/0x100
xfs_itruncate_extents_flags+0x1b8/0x2f4
xfs_inactive_truncate+0xe0/0x124
xfs_inactive+0x30c/0x3e0
xfs_inodegc_worker+0x140/0x234
process_scheduled_works+0x240/0x57c
worker_thread+0x198/0x468
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
run fstests generic/175 at 2024-02-02 04:40:21
[ C17] watchdog: BUG: soft lockup - CPU#17 stuck for 23s! [xfs_io:7679]
watchdog: BUG: soft lockup - CPU#17 stuck for 23s! [xfs_io:7679]
CPU: 17 PID: 7679 Comm: xfs_io Kdump: loaded Tainted: G X 6.4.0
NIP [c008000005e3ec94] xfs_rmapbt_diff_two_keys+0x54/0xe0 [xfs]
LR [c008000005e08798] xfs_btree_get_leaf_keys+0x110/0x1e0 [xfs]
Call Trace:
0xc000000014107c00 (unreliable)
__xfs_btree_updkeys+0x8c/0x2c0 [xfs]
xfs_btree_update_keys+0x150/0x170 [xfs]
xfs_btree_lshift+0x534/0x660 [xfs]
xfs_btree_make_block_unfull+0x19c/0x240 [xfs]
xfs_btree_insrec+0x4e4/0x630 [xfs]
xfs_btree_insert+0x104/0x2d0 [xfs]
xfs_rmap_insert+0xc4/0x260 [xfs]
xfs_rmap_map_shared+0x228/0x630 [xfs]
xfs_rmap_finish_one+0x2d4/0x350 [xfs]
xfs_rmap_update_finish_item+0x44/0xc0 [xfs]
xfs_defer_finish_noroll+0x2e4/0x740 [xfs]
__xfs_trans_commit+0x1f4/0x400 [xfs]
xfs_reflink_remap_extent+0x2d8/0x650 [xfs]
xfs_reflink_remap_blocks+0x154/0x320 [xfs]
xfs_file_remap_range+0x138/0x3a0 [xfs]
do_clone_file_range+0x11c/0x2f0
vfs_clone_file_range+0x60/0x1c0
ioctl_file_clone+0x78/0x140
sys_ioctl+0x934/0x1270
system_call_exception+0x158/0x320
system_call_vectored_common+0x15c/0x2ec
Cc: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Disha Goel<disgoel@linux.ibm.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Don't open-code what the kernel already provides.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
