summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* jffs2: Correct some typos in commentsShen Lichuan2024-11-142-2/+2
| | | | | | | | | | | | Fixed some confusing spelling errors, the details are as follows: -in the code comments: wating -> waiting succefully -> successfully Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* jffs2: fix use of uninitialized variableQingfang Deng2024-11-141-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | When building the kernel with -Wmaybe-uninitialized, the compiler reports this warning: In function 'jffs2_mark_erased_block', inlined from 'jffs2_erase_pending_blocks' at fs/jffs2/erase.c:116:4: fs/jffs2/erase.c:474:9: warning: 'bad_offset' may be used uninitialized [-Wmaybe-uninitialized] 474 | jffs2_erase_failed(c, jeb, bad_offset); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/jffs2/erase.c: In function 'jffs2_erase_pending_blocks': fs/jffs2/erase.c:402:18: note: 'bad_offset' was declared here 402 | uint32_t bad_offset; | ^~~~~~~~~~ When mtd->point() is used, jffs2_erase_pending_blocks can return -EIO without initializing bad_offset, which is later used at the filebad label in jffs2_mark_erased_block. Fix it by initializing this variable. Fixes: 8a0f572397ca ("[JFFS2] Return values of jffs2_block_check_erase error paths") Signed-off-by: Qingfang Deng <qingfang.deng@siflower.com.cn> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* jffs2: Use str_yes_no() helper functionThorsten Blum2024-11-141-4/+5
| | | | | | | | Remove hard-coded strings by using the str_yes_no() helper function. Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: ubi: remove redundant check on bytes_left at end of functionColin Ian King2024-11-141-1/+1
| | | | | | | | | | | | | In function ubi_nvmem_reg_read the while-loop can only be exiting of bytes_left is zero or an error has occurred. There is an exit return path if an error occurs, so the bytes_left can only be zero after that point. Hence the check for a non-zero bytes_left at the end of the function is redundant and can be removed. Remove the check and just return 0. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: ubi: fix unreleased fwnode_handle in find_volume_fwnode()Javier Carrasco2024-11-141-0/+2
| | | | | | | | | | | | | | | The 'fw_vols' fwnode_handle initialized via device_get_named_child_node() requires explicit calls to fwnode_handle_put() when the variable is no longer required. Add the missing calls to fwnode_handle_put() before the function returns. Cc: stable@vger.kernel.org Fixes: 51932f9fc487 ("mtd: ubi: populate ubi volume fwnode") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: authentication: Fix use-after-free in ubifs_tnc_end_commitWaqar Hameed2024-11-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After an insertion in TNC, the tree might split and cause a node to change its `znode->parent`. A further deletion of other nodes in the tree (which also could free the nodes), the aforementioned node's `znode->cparent` could still point to a freed node. This `znode->cparent` may not be updated when getting nodes to commit in `ubifs_tnc_start_commit()`. This could then trigger a use-after-free when accessing the `znode->cparent` in `write_index()` in `ubifs_tnc_end_commit()`. This can be triggered by running rm -f /etc/test-file.bin dd if=/dev/urandom of=/etc/test-file.bin bs=1M count=60 conv=fsync in a loop, and with `CONFIG_UBIFS_FS_AUTHENTICATION`. KASAN then reports: BUG: KASAN: use-after-free in ubifs_tnc_end_commit+0xa5c/0x1950 Write of size 32 at addr ffffff800a3af86c by task ubifs_bgt0_20/153 Call trace: dump_backtrace+0x0/0x340 show_stack+0x18/0x24 dump_stack_lvl+0x9c/0xbc print_address_description.constprop.0+0x74/0x2b0 kasan_report+0x1d8/0x1f0 kasan_check_range+0xf8/0x1a0 memcpy+0x84/0xf4 ubifs_tnc_end_commit+0xa5c/0x1950 do_commit+0x4e0/0x1340 ubifs_bg_thread+0x234/0x2e0 kthread+0x36c/0x410 ret_from_fork+0x10/0x20 Allocated by task 401: kasan_save_stack+0x38/0x70 __kasan_kmalloc+0x8c/0xd0 __kmalloc+0x34c/0x5bc tnc_insert+0x140/0x16a4 ubifs_tnc_add+0x370/0x52c ubifs_jnl_write_data+0x5d8/0x870 do_writepage+0x36c/0x510 ubifs_writepage+0x190/0x4dc __writepage+0x58/0x154 write_cache_pages+0x394/0x830 do_writepages+0x1f0/0x5b0 filemap_fdatawrite_wbc+0x170/0x25c file_write_and_wait_range+0x140/0x190 ubifs_fsync+0xe8/0x290 vfs_fsync_range+0xc0/0x1e4 do_fsync+0x40/0x90 __arm64_sys_fsync+0x34/0x50 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 Freed by task 403: kasan_save_stack+0x38/0x70 kasan_set_track+0x28/0x40 kasan_set_free_info+0x28/0x4c __kasan_slab_free+0xd4/0x13c kfree+0xc4/0x3a0 tnc_delete+0x3f4/0xe40 ubifs_tnc_remove_range+0x368/0x73c ubifs_tnc_remove_ino+0x29c/0x2e0 ubifs_jnl_delete_inode+0x150/0x260 ubifs_evict_inode+0x1d4/0x2e4 evict+0x1c8/0x450 iput+0x2a0/0x3c4 do_unlinkat+0x2cc/0x490 __arm64_sys_unlinkat+0x90/0x100 invoke_syscall.constprop.0+0xa8/0x260 do_el0_svc+0xc8/0x1f0 el0_svc+0x34/0x70 el0t_64_sync_handler+0x108/0x114 el0t_64_sync+0x1a4/0x1a8 The offending `memcpy()` in `ubifs_copy_hash()` has a use-after-free when a node becomes root in TNC but still has a `cparent` to an already freed node. More specifically, consider the following TNC: zroot / / zp1 / / zn Inserting a new node `zn_new` with a key smaller then `zn` will trigger a split in `tnc_insert()` if `zp1` is full: zroot / \ / \ zp1 zp2 / \ / \ zn_new zn `zn->parent` has now been moved to `zp2`, *but* `zn->cparent` still points to `zp1`. Now, consider a removal of all the nodes _except_ `zn`. Just when `tnc_delete()` is about to delete `zroot` and `zp2`: zroot \ \ zp2 \ \ zn `zroot` and `zp2` get freed and the tree collapses: zn `zn` now becomes the new `zroot`. `get_znodes_to_commit()` will now only find `zn`, the new `zroot`, and `write_index()` will check its `znode->cparent` that wrongly points to the already freed `zp1`. `ubifs_copy_hash()` thus gets wrongly called with `znode->cparent->zbranch[znode->iip].hash` that triggers the use-after-free! Fix this by explicitly setting `znode->cparent` to `NULL` in `get_znodes_to_commit()` for the root node. The search for the dirty nodes is bottom-up in the tree. Thus, when `find_next_dirty(znode)` returns NULL, the current `znode` _is_ the root node. Add an assert for this. Fixes: 16a26b20d2af ("ubifs: authentication: Add hashes to index nodes") Tested-by: Waqar Hameed <waqar.hameed@axis.com> Co-developed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Waqar Hameed <waqar.hameed@axis.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubi: fastmap: Fix duplicate slab cache names while attachingZhihao Cheng2024-11-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y"), the duplicate slab cache names can be detected and a kernel WARNING is thrown out. In UBI fast attaching process, alloc_ai() could be invoked twice with the same slab cache name 'ubi_aeb_slab_cache', which will trigger following warning messages: kmem_cache of name 'ubi_aeb_slab_cache' already exists WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107 __kmem_cache_create_args+0x100/0x5f0 Modules linked in: ubi(+) nandsim [last unloaded: nandsim] CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2 RIP: 0010:__kmem_cache_create_args+0x100/0x5f0 Call Trace: __kmem_cache_create_args+0x100/0x5f0 alloc_ai+0x295/0x3f0 [ubi] ubi_attach+0x3c3/0xcc0 [ubi] ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi] ubi_init+0x3fb/0x800 [ubi] do_init_module+0x265/0x7d0 __x64_sys_finit_module+0x7a/0xc0 The problem could be easily reproduced by loading UBI device by fastmap with CONFIG_DEBUG_VM=y. Fix it by using different slab names for alloc_ai() callers. Fixes: d2158f69a7d4 ("UBI: Remove alloc_ai() slab name from parameter list") Fixes: fdf10ed710c0 ("ubi: Rework Fastmap attach base code") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: xattr: remove unused anonymous enumPascal Eberhard2024-11-141-13/+0
| | | | | | | | | commit 2b88fc21cae9 ("ubifs: Switch to generic xattr handlers") removes usage of this anonymous enum. Delete the enum as well. Signed-off-by: Pascal Eberhard <pascal.eberhard@se.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Reduce kfree() calls in ubifs_purge_xattrs()Markus Elfring2024-11-141-4/+2
| | | | | | | | | | Move a pair of kfree() calls behind the label “out_err” so that two statements can be better reused at the end of this function implementation. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Call iput(xino) only once in ubifs_purge_xattrs()Markus Elfring2024-11-141-3/+1
| | | | | | | | | | | | An iput(xino) call was immediately used after a return value check for a remove_xattr() call in this function implementation. Thus call such a function only once instead directly before the check. This issue was transformed by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubi: wl: Close down wear-leveling before nand is suspendedMårten Lindahl2024-11-142-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a reboot/shutdown signal with double force (-ff) is triggered when the erase worker or wear-leveling worker function runs we may end up in a race condition since the MTD device gets a reboot notification and suspends the nand flash before the erase or wear-leveling is done. This will reject all accesses to the flash with -EBUSY. Sequence for the erase worker function: systemctl reboot -ff ubi_thread do_work __do_sys_reboot blocking_notifier_call_chain mtd_reboot_notifier nand_shutdown nand_suspend __erase_worker ubi_sync_erase mtd_erase nand_erase_nand # Blocked by suspended chip nand_get_device => EBUSY Similar sequence for the wear-leveling function: systemctl reboot -ff ubi_thread do_work __do_sys_reboot blocking_notifier_call_chain mtd_reboot_notifier nand_shutdown nand_suspend wear_leveling_worker ubi_eba_copy_leb ubi_io_write mtd_write nand_write_oob # Blocked by suspended chip nand_get_device => EBUSY systemd-shutdown[1]: Rebooting. ubi0 error: ubi_io_write: error -16 while writing 2048 bytes to PEB CPU: 1 PID: 82 Comm: ubi_bgt0d Kdump: loaded Tainted: G O (unwind_backtrace) from [<80107b9f>] (show_stack+0xb/0xc) (show_stack) from [<8033641f>] (dump_stack_lvl+0x2b/0x34) (dump_stack_lvl) from [<803b7f3f>] (ubi_io_write+0x3ab/0x4a8) (ubi_io_write) from [<803b817d>] (ubi_io_write_vid_hdr+0x71/0xb4) (ubi_io_write_vid_hdr) from [<803b6971>] (ubi_eba_copy_leb+0x195/0x2f0) (ubi_eba_copy_leb) from [<803b939b>] (wear_leveling_worker+0x2ff/0x738) (wear_leveling_worker) from [<803b86ef>] (do_work+0x5b/0xb0) (do_work) from [<803b9ee1>] (ubi_thread+0xb1/0x11c) (ubi_thread) from [<8012c113>] (kthread+0x11b/0x134) (kthread) from [<80100139>] (ret_from_fork+0x11/0x38) Exception stack(0x80c43fb0 to 0x80c43ff8) ... ubi0 error: ubi_dump_flash: err -16 while reading 2048 bytes from PEB ubi0 error: wear_leveling_worker: error -16 while moving PEB 246 to PEB ubi0 warning: ubi_ro_mode.part.0: switch to read-only mode ... ubi0 error: do_work: work failed with error code -16 ubi0 error: ubi_thread: ubi_bgt0d: work failed with error code -16 ... Kernel panic - not syncing: Software Watchdog Timer expired Add a reboot notification for the ubi/wear-leveling to shutdown any potential flash work actions before the nand is suspended. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* mtd: ubi: Rmove unused declaration in header fileZhang Zekun2024-11-141-1/+0
| | | | | | | | | | The definition of ubi_destroy_ai() has been removed since commit dac6e2087a41 ("UBI: Add fastmap stuff to attach.c"). Remove the empty declaration in header file. Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Correct the total block count by deducting journal reservationZhihao Cheng2024-11-141-3/+3
| | | | | | | | | | | | | | Since commit e874dcde1cbf ("ubifs: Reserve one leb for each journal head while doing budget"), available space is calulated by deducting reservation for all journal heads. However, the total block count ( which is only used by statfs) is not updated yet, which will cause the wrong displaying for used space(total - available). Fix it by deducting reservation for all journal heads from total block count. Fixes: e874dcde1cbf ("ubifs: Reserve one leb for each journal head while doing budget") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Convert to use ERR_CAST()Shen Lichuan2024-11-141-2/+2
| | | | | | | | | As opposed to open-code, using the ERR_CAST macro clearly indicates that this is a pointer to an error value and a type conversion was performed. Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: add support for FS_IOC_GETFSSYSFSPATHHongbo Li2024-11-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit ae8c51175730 ("fs: add FS_IOC_GETFSSYSFSPATH"), a new fs ioctl was introduced to standardize exporting data from sysfs across filesystems. The returned path will always be of the form "$FSTYP/$SYSFS_IDENTIFIER", where the sysfs identifier may be a UUID or a device name. The ubifs is a file system based on char device, and the common method to fill s_sysfs_name (super_set_sysfs_name_bdev) is unavialable. So in order to support FS_IOC_GETFSSYSFSPATH ioctl, we fill the s_sysfs_name with ubi_volume_info member which keeps the format defined in macro UBIFS_DFS_DIR_NAME by using super_set_sysfs_name_generic. That's for ubifs, it will output "ubifs/<dev>". ``` $ ./ioctl_getfssysfs_path /mnt/ubifs/testfile path: ubifs/ubi0_0 $ ls /sys/fs/ubifs/ubi0_0/ errors_crc errors_magic errors_node ``` Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: remove unused ioctl flags GETFLAGS/SETFLAGSHongbo Li2024-11-141-6/+0
| | | | | | | | | | | | In the ubifs, ubifs_fileattr_get and ubifs_fileattr_set have been implemented, GETFLAGS and SETFLAGS ioctl are not handled in filesystem's own ioctl helper. Additionally, these flags' cases are not handled in ubifs's ioctl helper, so we can remove them. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Display the inode number when orphan twice happensLiu Mingrui2024-11-141-1/+1
| | | | | | | | | Display the inode number in error message when the same orphan inode is added twice, which could provide more information for debugging. Signed-off-by: Liu Mingrui <liumingrui@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubi: fastmap: wl: Schedule fm_work if wear-leveling pool is emptyZhihao Cheng2024-11-143-5/+19
| | | | | | | | | | | | Since commit 14072ee33d5a ("ubi: fastmap: Check wl_pool for free peb before wear leveling"), wear_leveling_worker() won't schedule fm_work if wear-leveling pool is empty, which could temporarily disable the wear-leveling until the fastmap is updated(eg. pool becomes empty). Fix it by scheduling fm_work if wl_pool is empty during wear-leveing. Fixes: 14072ee33d5a ("ubi: fastmap: Check wl_pool for free peb before wear leveling") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubi: wl: Put source PEB into correct list if trying locking LEB failedZhihao Cheng2024-11-141-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During wear-leveing work, the source PEB will be moved into scrub list when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong for non-scrub type source PEB. The problem could bring extra and ineffective wear-leveing jobs, which makes more or less negative effects for the life time of flash. Specifically, the process is divided 2 steps: 1. wear_leveling_worker // generate false scrub type PEB ubi_eba_copy_leb // MOVE_RETRY is returned leb_write_trylock // trylock failed scrubbing = 1; e1 is put into ubi->scrub 2. wear_leveling_worker // schedule false scrub type PEB for wl scrubbing = 1 e1 = rb_entry(rb_first(&ubi->scrub)) The problem can be reproduced easily by running fsstress on a small UBIFS partition(<64M, simulated by nandsim) for 5~10mins (CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following message is shown: ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165 Since scrub type source PEB has set variable scrubbing as '1', and variable scrubbing is checked before variable keep, so the problem can be fixed by setting keep variable as 1 directly if the source LEB cannot be locked. Fixes: e801e128b220 ("UBI: fix missing scrub when there is a bit-flip") CC: stable@vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: Remove ineffective function ubifs_evict_xattr_inode()Zhihao Cheng2024-11-143-27/+0
| | | | | | | | | | | | | Function ubifs_evict_xattr_inode() is imported by commit 272eda8298dc ("ubifs: Correctly evict xattr inodes") to reclaim xattr inode when the host inode is deleted. The xattr inode is evicted in the host inode deleting process since commit 7959cf3a7506 ("ubifs: journal: Handle xattrs like files"). So the ineffective function ubifs_evict_xattr_inode() can be deleted safely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* ubifs: ubifs_jnl_write_inode: Only check once for the limitation of xattr countZhihao Cheng2024-11-141-6/+6
| | | | | | | | | No need to check the limitation of xattr count every time in function ubifs_jnl_write_inode(), because the 'ui->xattr_cnt' won't be modified by others in the inode evicting process. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
* Linux 6.12-rc7v6.12-rc7Linus Torvalds2024-11-101-1/+1
|
* Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2024-11-103-9/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of Qualcomm clk driver fixes: - Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks - Fix alpha PLL post_div mask for the cases where width is not specified - Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL trigger feature on the video clocks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
| * Merge tag 'qcom-clk-fixes-for-6.12' of ↵Stephen Boyd2024-11-063-9/+9
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes Pull Qualcomm clk driver fixes from Bjorn Andersson: - Correct flags for X Elite USB MP GDSC and pcie pipediv2 clocks - Fix alpha PLL post_div mask for the cases where width is not specified - Avoid hangs in the SM8350 video driver (venus) by setting HW_CTRL trigger feature on the video clocks * tag 'qcom-clk-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flags clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not set clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCs
| | * clk: qcom: gcc-x1e80100: Fix USB MP SS1 PHY GDSC pwrsts flagsAbel Vesa2024-10-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allowing these GDSCs to collapse makes the QMP combo PHYs lose their configuration on machine suspend. Currently, the QMP combo PHY driver doesn't reinitialise the HW on resume. Under such conditions, the USB SuperSpeed support is broken. To avoid this, mark the pwrsts flags with RET_ON. This has been already done for USB 0 and 1 SS PHY GDSCs, Do this also for the USB MP SS1 PHY GDSC config. The USB MP SS0 PHY GDSC already has it. Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Link: https://lore.kernel.org/r/20241021-x1e80100-clk-gcc-fix-usb-mp-phy-gdsc-pwrsts-flags-v2-1-0bfd64556238@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| | * clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocksQiang Yu2024-10-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pipediv2_clk's source from the same mux as pipe clock. So they have same limitation, which is that the PHY sequence requires to enable these local CBCs before the PHY is actually outputting a clock to them. This means the clock won't actually turn on when we vote them. Hence, let's skip the halt bit check of the pipediv2_clk, otherwise pipediv2_clk may stuck at off state during bootup. Cc: stable@vger.kernel.org Fixes: 161b7c401f4b ("clk: qcom: Add Global Clock controller (GCC) driver for X1E80100") Suggested-by: Mike Tipton <quic_mdtipton@quicinc.com> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com> Reviewed-by: Konrad Dybcio <konradybcio@kernel.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20241011104142.1181773-6-quic_qianyu@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| | * clk: qcom: clk-alpha-pll: Fix pll post div mask when width is not setBarnabás Czémán2024-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Many qcom clock drivers do not have .width set. In that case value of (p)->width - 1 will be negative which breaks clock tree. Fix this by checking if width is zero, and pass 3 to GENMASK if that's the case. Fixes: 1c3541145cbf ("clk: qcom: support for 2 bit PLL post divider") Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Christopher Obbard <christopher.obbard@linaro.org> Tested-by: Christopher Obbard <christopher.obbard@linaro.org> Link: https://lore.kernel.org/r/20241006-fix-postdiv-mask-v3-1-160354980433@mainlining.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
| | * clk: qcom: videocc-sm8350: use HW_CTRL_TRIGGER for vcodec GDSCsJohan Hovold2024-10-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent change in the venus driver results in a stuck clock on the Lenovo ThinkPad X13s, for example, when streaming video in firefox: video_cc_mvs0_clk status stuck at 'off' WARNING: CPU: 6 PID: 2885 at drivers/clk/qcom/clk-branch.c:87 clk_branch_wait+0x144/0x15c ... Call trace: clk_branch_wait+0x144/0x15c clk_branch2_enable+0x30/0x40 clk_core_enable+0xd8/0x29c clk_enable+0x2c/0x4c vcodec_clks_enable.isra.0+0x94/0xd8 [venus_core] coreid_power_v4+0x464/0x628 [venus_core] vdec_start_streaming+0xc4/0x510 [venus_dec] vb2_start_streaming+0x6c/0x180 [videobuf2_common] vb2_core_streamon+0x120/0x1dc [videobuf2_common] vb2_streamon+0x1c/0x6c [videobuf2_v4l2] v4l2_m2m_ioctl_streamon+0x30/0x80 [v4l2_mem2mem] v4l_streamon+0x24/0x30 [videodev] using the out-of-tree sm8350/sc8280xp venus support. [1] Update also the sm8350/sc8280xp GDSC definitions so that the hw control mode can be changed at runtime as the venus driver now requires. Fixes: ec9a652e5149 ("venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6") Link: https://lore.kernel.org/lkml/20230731-topic-8280_venus-v1-0-8c8bbe1983a5@linaro.org/ # [1] Cc: Jagadeesh Kona <quic_jkona@quicinc.com> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Abel Vesa <abel.vesa@linaro.org> Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Steev Klimaszewski <steev@kali.org> Link: https://lore.kernel.org/r/20240901093024.18841-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
* | | Merge tag 'i2c-for-6.12-rc7' of ↵Linus Torvalds2024-11-103-4/+7
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "i2c-host fixes for v6.12-rc7 (from Andi): - Fix designware incorrect behavior when concluding a transmission - Fix Mule multiplexer error value evaluation" * tag 'i2c-for-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not set i2c: muxes: Fix return value check in mule_i2c_mux_probe()
| * \ \ Merge tag 'i2c-host-fixes-6.12-rc7' of ↵Wolfram Sang2024-11-093-4/+7
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current i2c-host fixes for v6.12-rc7 In designware an incorrect behavior has been fixes when concluding a transmission. Fixed return error value evaluation in the Mule multiplexer.
| | * | | i2c: designware: do not hold SCL low when I2C_DYNAMIC_TAR_UPDATE is not setLiu Peibao2024-11-082-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the Tx FIFO is empty and the last command has no STOP bit set, the master holds SCL low. If I2C_DYNAMIC_TAR_UPDATE is not set, BIT(13) MST_ON_HOLD of IC_RAW_INTR_STAT is not enabled, causing the __i2c_dw_disable() timeout. This is quite similar to commit 2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low"). Also check BIT(7) MST_HOLD_TX_FIFO_EMPTY in IC_STATUS, which is available when IC_STAT_FOR_CLK_STRETCH is set. Fixes: 2409205acd3c ("i2c: designware: fix __i2c_dw_disable() in case master is holding SCL low") Co-developed-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com> Signed-off-by: Xiaowu Ding <xiaowu.ding@jaguarmicro.com> Co-developed-by: Angus Chen <angus.chen@jaguarmicro.com> Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com> Signed-off-by: Liu Peibao <loven.liu@jaguarmicro.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
| | * | | i2c: muxes: Fix return value check in mule_i2c_mux_probe()Yang Yingliang2024-11-051-2/+2
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If dev_get_regmap() fails, it returns NULL pointer not ERR_PTR(), replace IS_ERR() with NULL pointer check, and return -ENODEV. Fixes: d0f8e97866bf ("i2c: muxes: add support for tsd,mule-i2c multiplexer") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
* | | | filemap: Fix bounds checking in filemap_read()Trond Myklebust2024-11-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the caller supplies an iocb->ki_pos value that is close to the filesystem upper limit, and an iterator with a count that causes us to overflow that limit, then filemap_read() enters an infinite loop. This behaviour was discovered when testing xfstests generic/525 with the "localio" optimisation for loopback NFS mounts. Reported-by: Mike Snitzer <snitzer@kernel.org> Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Tested-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge tag 'irq_urgent_for_v6.12_rc7' of ↵Linus Torvalds2024-11-101-0/+7
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Make sure GICv3 controller interrupt activation doesn't race with a concurrent deactivation due to propagation delays of the register write * tag 'irq_urgent_for_v6.12_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Force propagation of the active state with a read-back
| * | | | irqchip/gic-v3: Force propagation of the active state with a read-backMarc Zyngier2024-11-071-0/+7
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Christoffer reports that on some implementations, writing to GICR_ISACTIVER0 (and similar GICD registers) can race badly with a guest issuing a deactivation of that interrupt via the system register interface. There are multiple reasons to this: - this uses an early write-acknoledgement memory type (nGnRE), meaning that the write may only have made it as far as some interconnect by the time the store is considered "done" - the GIC itself is allowed to buffer the write until it decides to take it into account (as long as it is in finite time) The effects are that the activation may not have taken effect by the time the kernel enters the guest, forcing an immediate exit, or that a guest deactivation occurs before the interrupt is active, doing nothing. In order to guarantee that the write to the ISACTIVER register has taken effect, read back from it, forcing the interconnect to propagate the write, and the GIC to process the write before returning the read. Reported-by: Christoffer Dall <christoffer.dall@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Christoffer Dall <christoffer.dall@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20241106084418.3794612-1-maz@kernel.org
* | | | Merge tag 'mm-hotfixes-stable-2024-11-09-22-40' of ↵Linus Torvalds2024-11-1030-172/+329
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "20 hotfixes, 14 of which are cc:stable. Three affect DAMON. Lorenzo's five-patch series to address the mmap_region error handling is here also. Apart from that, various singletons" * tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Thorsten Blum ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove() signal: restore the override_rlimit logic fs/proc: fix compile warning about variable 'vmcore_mmap_ops' ucounts: fix counter leak in inc_rlimit_get_ucounts() selftests: hugetlb_dio: check for initial conditions to skip in the start mm: fix docs for the kernel parameter ``thp_anon=`` mm/damon/core: avoid overflow in damon_feed_loop_next_input() mm/damon/core: handle zero schemes apply interval mm/damon/core: handle zero {aggregation,ops_update} intervals mm/mlock: set the correct prev on failure objpool: fix to make percpu slot allocation more robust mm/page_alloc: keep track of free highatomic mm: resolve faulty mmap_region() error path behaviour mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling mm: refactor map_deny_write_exec() mm: unconditionally close VMAs on error mm: avoid unsafe VMA hook invocation when error arises on mmap hook mm/thp: fix deferred split unqueue naming and locking mm/thp: fix deferred split queue not partially_mapped
| * | | | mailmap: add entry for Thorsten BlumThorsten Blum2024-11-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Map my previously used email address to my @linux.dev address. Link: https://lkml.kernel.org/r/20241103234411.2522-2-thorsten.blum@linux.dev Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Cc: Alex Elder <elder@kernel.org> Cc: David S. Miller <davem@davemloft.net> Cc: Geliang Tang <geliang@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Mathieu Othacehe <m.othacehe@gmail.com> Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org> Cc: Matt Ranostay <matt@ranostay.sg> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: Neeraj Upadhyay <neeraj.upadhyay@kernel.org> Cc: Quentin Monnet <qmo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()Andrew Kanner2024-11-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syzkaller is able to provoke null-ptr-dereference in ocfs2_xa_remove(): [ 57.319872] (a.out,1161,7):ocfs2_xa_remove:2028 ERROR: status = -12 [ 57.320420] (a.out,1161,7):ocfs2_xa_cleanup_value_truncate:1999 ERROR: Partial truncate while removing xattr overlay.upper. Leaking 1 clusters and removing the entry [ 57.321727] BUG: kernel NULL pointer dereference, address: 0000000000000004 [...] [ 57.325727] RIP: 0010:ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [...] [ 57.331328] Call Trace: [ 57.331477] <TASK> [...] [ 57.333511] ? do_user_addr_fault+0x3e5/0x740 [ 57.333778] ? exc_page_fault+0x70/0x170 [ 57.334016] ? asm_exc_page_fault+0x2b/0x30 [ 57.334263] ? __pfx_ocfs2_xa_block_wipe_namevalue+0x10/0x10 [ 57.334596] ? ocfs2_xa_block_wipe_namevalue+0x2a/0xc0 [ 57.334913] ocfs2_xa_remove_entry+0x23/0xc0 [ 57.335164] ocfs2_xa_set+0x704/0xcf0 [ 57.335381] ? _raw_spin_unlock+0x1a/0x40 [ 57.335620] ? ocfs2_inode_cache_unlock+0x16/0x20 [ 57.335915] ? trace_preempt_on+0x1e/0x70 [ 57.336153] ? start_this_handle+0x16c/0x500 [ 57.336410] ? preempt_count_sub+0x50/0x80 [ 57.336656] ? _raw_read_unlock+0x20/0x40 [ 57.336906] ? start_this_handle+0x16c/0x500 [ 57.337162] ocfs2_xattr_block_set+0xa6/0x1e0 [ 57.337424] __ocfs2_xattr_set_handle+0x1fd/0x5d0 [ 57.337706] ? ocfs2_start_trans+0x13d/0x290 [ 57.337971] ocfs2_xattr_set+0xb13/0xfb0 [ 57.338207] ? dput+0x46/0x1c0 [ 57.338393] ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338665] ? ocfs2_xattr_trusted_set+0x28/0x30 [ 57.338948] __vfs_removexattr+0x92/0xc0 [ 57.339182] __vfs_removexattr_locked+0xd5/0x190 [ 57.339456] ? preempt_count_sub+0x50/0x80 [ 57.339705] vfs_removexattr+0x5f/0x100 [...] Reproducer uses faultinject facility to fail ocfs2_xa_remove() -> ocfs2_xa_value_truncate() with -ENOMEM. In this case the comment mentions that we can return 0 if ocfs2_xa_cleanup_value_truncate() is going to wipe the entry anyway. But the following 'rc' check is wrong and execution flow do 'ocfs2_xa_remove_entry(loc);' twice: * 1st: in ocfs2_xa_cleanup_value_truncate(); * 2nd: returning back to ocfs2_xa_remove() instead of going to 'out'. Fix this by skipping the 2nd removal of the same entry and making syzkaller repro happy. Link: https://lkml.kernel.org/r/20241103193845.2940988-1-andrew.kanner@gmail.com Fixes: 399ff3a748cf ("ocfs2: Handle errors while setting external xattr values.") Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com> Reported-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/671e13ab.050a0220.2b8c0f.01d0.GAE@google.com/T/ Tested-by: syzbot+386ce9e60fa1b18aac5b@syzkaller.appspotmail.com Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | signal: restore the override_rlimit logicRoman Gushchin2024-11-073-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of signals. However now it's enforced unconditionally, even if override_rlimit is set. This behavior change caused production issues. For example, if the limit is reached and a process receives a SIGSEGV signal, sigqueue_alloc fails to allocate the necessary resources for the signal delivery, preventing the signal from being delivered with siginfo. This prevents the process from correctly identifying the fault address and handling the error. From the user-space perspective, applications are unaware that the limit has been reached and that the siginfo is effectively 'corrupted'. This can lead to unpredictable behavior and crashes, as we observed with java applications. Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip the comparison to max there if override_rlimit is set. This effectively restores the old behavior. Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts") Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Co-developed-by: Andrei Vagin <avagin@google.com> Signed-off-by: Andrei Vagin <avagin@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Alexey Gladkov <legion@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | fs/proc: fix compile warning about variable 'vmcore_mmap_ops'Qi Xi2024-11-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When build with !CONFIG_MMU, the variable 'vmcore_mmap_ops' is defined but not used: >> fs/proc/vmcore.c:458:42: warning: unused variable 'vmcore_mmap_ops' 458 | static const struct vm_operations_struct vmcore_mmap_ops = { Fix this by only defining it when CONFIG_MMU is enabled. Link: https://lkml.kernel.org/r/20241101034803.9298-1-xiqi2@huawei.com Fixes: 9cb218131de1 ("vmcore: introduce remap_oldmem_pfn_range()") Signed-off-by: Qi Xi <xiqi2@huawei.com> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/lkml/202410301936.GcE8yUos-lkp@intel.com/ Cc: Baoquan He <bhe@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | ucounts: fix counter leak in inc_rlimit_get_ucounts()Andrei Vagin2024-11-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The inc_rlimit_get_ucounts() increments the specified rlimit counter and then checks its limit. If the value exceeds the limit, the function returns an error without decrementing the counter. Link: https://lkml.kernel.org/r/20241101191940.3211128-1-roman.gushchin@linux.dev Fixes: 15bc01effefe ("ucounts: Fix signal ucount refcounting") Signed-off-by: Andrei Vagin <avagin@google.com> Co-developed-by: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Tested-by: Roman Gushchin <roman.gushchin@linux.dev> Acked-by: Alexey Gladkov <legion@kernel.org> Cc: Kees Cook <kees@kernel.org> Cc: Andrei Vagin <avagin@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Alexey Gladkov <legion@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | selftests: hugetlb_dio: check for initial conditions to skip in the startMuhammad Usama Anjum2024-11-071-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test should be skipped if initial conditions aren't fulfilled in the start instead of failing and outputting non-compliant TAP logs. This kind of failure pollutes the results. The initial conditions are: - The test should only execute if /tmp file can be allocated. - The test should only execute if huge pages are free. Before: TAP version 13 1..4 Bail out! Error opening file : Read-only file system (30) # Planned tests != run tests (4 != 0) # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 After: TAP version 13 1..0 # SKIP Unable to allocate file: Read-only file system Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()") Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Donet Tom <donettom@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm: fix docs for the kernel parameter ``thp_anon=``Maíra Canal2024-11-072-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we add ``thp_anon=32,64K:always`` to the kernel command line, we will see the following error: [ 0.000000] huge_memory: thp_anon=32,64K:always: error parsing string, ignoring setting This happens because the correct format isn't ``thp_anon=<size>,<size>[KMG]:<state>```, as [KMG] must follow each number to especify its unit. So, the correct format is ``thp_anon=<size>[KMG],<size>[KMG]:<state>```. Therefore, adjust the documentation to reflect the correct format of the parameter ``thp_anon=``. Link: https://lkml.kernel.org/r/20241101165719.1074234-3-mcanal@igalia.com Fixes: dd4d30d1cdbe ("mm: override mTHP "enabled" defaults at kernel cmdline") Signed-off-by: Maíra Canal <mcanal@igalia.com> Acked-by: Barry Song <baohua@kernel.org> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lance Yang <ioworker0@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm/damon/core: avoid overflow in damon_feed_loop_next_input()SeongJae Park2024-11-071-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | damon_feed_loop_next_input() is inefficient and fragile to overflows. Specifically, 'score_goal_diff_bp' calculation can overflow when 'score' is high. The calculation is actually unnecessary at all because 'goal' is a constant of value 10,000. Calculation of 'compensation' is again fragile to overflow. Final calculation of return value for under-achiving case is again fragile to overflow when the current score is under-achieving the target. Add two corner cases handling at the beginning of the function to make the body easier to read, and rewrite the body of the function to avoid overflows and the unnecessary bp value calcuation. Link: https://lkml.kernel.org/r/20241031161203.47751-1-sj@kernel.org Fixes: 9294a037c015 ("mm/damon/core: implement goal-oriented feedback-driven quota auto-tuning") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/944f3d5b-9177-48e7-8ec9-7f1331a3fea3@roeck-us.net Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: <stable@vger.kernel.org> [6.8.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm/damon/core: handle zero schemes apply intervalSeongJae Park2024-11-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DAMON's logics to determine if this is the time to apply damos schemes assumes next_apply_sis is always set larger than current passed_sample_intervals. And therefore assume continuously incrementing passed_sample_intervals will make it reaches to the next_apply_sis in future. The logic hence does apply the scheme and update next_apply_sis only if passed_sample_intervals is same to next_apply_sis. If Schemes apply interval is set as zero, however, next_apply_sis is set same to current passed_sample_intervals, respectively. And passed_sample_intervals is incremented before doing the next_apply_sis check. Hence, next_apply_sis becomes larger than next_apply_sis, and the logic says it is not the time to apply schemes and update next_apply_sis. In other words, DAMON stops applying schemes until passed_sample_intervals overflows. Based on the documents and the common sense, a reasonable behavior for such inputs would be applying the schemes for every sampling interval. Handle the case by removing the assumption. Link: https://lkml.kernel.org/r/20241031183757.49610-3-sj@kernel.org Fixes: 42f994b71404 ("mm/damon/core: implement scheme-specific apply interval") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.7.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm/damon/core: handle zero {aggregation,ops_update} intervalsSeongJae Park2024-11-071-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "mm/damon/core: fix handling of zero non-sampling intervals". DAMON's internal intervals accounting logic is not correctly handling non-sampling intervals of zero values for a wrong assumption. This could cause unexpected monitoring behavior, and even result in infinite hang of DAMON sysfs interface user threads in case of zero aggregation interval. Fix those by updating the intervals accounting logic. For details of the root case and solutions, please refer to commit messages of fixes. This patch (of 2): DAMON's logics to determine if this is the time to do aggregation and ops update assumes next_{aggregation,ops_update}_sis are always set larger than current passed_sample_intervals. And therefore it further assumes continuously incrementing passed_sample_intervals every sampling interval will make it reaches to the next_{aggregation,ops_update}_sis in future. The logic therefore make the action and update next_{aggregation,ops_updaste}_sis only if passed_sample_intervals is same to the counts, respectively. If Aggregation interval or Ops update interval are zero, however, next_aggregation_sis or next_ops_update_sis are set same to current passed_sample_intervals, respectively. And passed_sample_intervals is incremented before doing the next_{aggregation,ops_update}_sis check. Hence, passed_sample_intervals becomes larger than next_{aggregation,ops_update}_sis, and the logic says it is not the time to do the action and update next_{aggregation,ops_update}_sis forever, until an overflow happens. In other words, DAMON stops doing aggregations or ops updates effectively forever, and users cannot get monitoring results. Based on the documents and the common sense, a reasonable behavior for such inputs is doing an aggregation and an ops update for every sampling interval. Handle the case by removing the assumption. Note that this could incur particular real issue for DAMON sysfs interface users, in case of zero Aggregation interval. When user starts DAMON with zero Aggregation interval and asks online DAMON parameter tuning via DAMON sysfs interface, the request is handled by the aggregation callback. Until the callback finishes the work, the user who requested the online tuning just waits. Hence, the user will be stuck until the passed_sample_intervals overflows. Link: https://lkml.kernel.org/r/20241031183757.49610-1-sj@kernel.org Link: https://lkml.kernel.org/r/20241031183757.49610-2-sj@kernel.org Fixes: 4472edf63d66 ("mm/damon/core: use number of passed access sampling as a timer") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> [6.7.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm/mlock: set the correct prev on failureWei Yang2024-11-071-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 94d7d9233951 ("mm: abstract the vma_merge()/split_vma() pattern for mprotect() et al."), if vma_modify_flags() return error, the vma is set to an error code. This will lead to an invalid prev be returned. Generally this shouldn't matter as the caller should treat an error as indicating state is now invalidated, however unfortunately apply_mlockall_flags() does not check for errors and assumes that mlock_fixup() correctly maintains prev even if an error were to occur. This patch fixes that assumption. [lorenzo.stoakes@oracle.com: provide a better fix and rephrase the log] Link: https://lkml.kernel.org/r/20241027123321.19511-1-richard.weiyang@gmail.com Fixes: 94d7d9233951 ("mm: abstract the vma_merge()/split_vma() pattern for mprotect() et al.") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | objpool: fix to make percpu slot allocation more robustMasami Hiramatsu (Google)2024-11-071-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since gfp & GFP_ATOMIC == GFP_ATOMIC is true for GFP_KERNEL | GFP_HIGH, it will use kmalloc if user specifies that combination. Here the reason why combining the __vmalloc_node() and kmalloc_node() is that the vmalloc does not support all GFP flag, especially GFP_ATOMIC. So we should check if gfp & (GFP_ATOMIC | GFP_KERNEL) != GFP_ATOMIC for vmalloc first. This ensures caller can sleep. And for the robustness, even if vmalloc fails, it should retry with kmalloc to allocate it. Link: https://lkml.kernel.org/r/173008598713.1262174.2959179484209897252.stgit@mhiramat.roam.corp.google.com Fixes: aff1871bfc81 ("objpool: fix choosing allocation for percpu slots") Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Closes: https://lore.kernel.org/all/CAHk-=whO+vSH+XVRio8byJU8idAWES0SPGVZ7KAVdc4qrV0VUA@mail.gmail.com/ Cc: Leo Yan <leo.yan@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Wu <wuqiang.matt@bytedance.com> Cc: Mikel Rychliski <mikel@mikelr.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Viktor Malik <vmalik@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm/page_alloc: keep track of free highatomicYu Zhao2024-11-072-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OOM kills due to vastly overestimated free highatomic reserves were observed: ... invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0 ... Node 0 Normal free:1482936kB boost:0kB min:410416kB low:739404kB high:1068392kB reserved_highatomic:1073152KB ... Node 0 Normal: 1292*4kB (ME) 1920*8kB (E) 383*16kB (UE) 220*32kB (ME) 340*64kB (E) 2155*128kB (UE) 3243*256kB (UE) 615*512kB (U) 1*1024kB (M) 0*2048kB 0*4096kB = 1477408kB The second line above shows that the OOM kill was due to the following condition: free (1482936kB) - reserved_highatomic (1073152kB) = 409784KB < min (410416kB) And the third line shows there were no free pages in any MIGRATE_HIGHATOMIC pageblocks, which otherwise would show up as type 'H'. Therefore __zone_watermark_unusable_free() underestimated the usable free memory by over 1GB, which resulted in the unnecessary OOM kill above. The comments in __zone_watermark_unusable_free() warns about the potential risk, i.e., If the caller does not have rights to reserves below the min watermark then subtract the high-atomic reserves. This will over-estimate the size of the atomic reserve but it avoids a search. However, it is possible to keep track of free pages in reserved highatomic pageblocks with a new per-zone counter nr_free_highatomic protected by the zone lock, to avoid a search when calculating the usable free memory. And the cost would be minimal, i.e., simple arithmetics in the highatomic alloc/free/move paths. Note that since nr_free_highatomic can be relatively small, using a per-cpu counter might cause too much drift and defeat its purpose, in addition to the extra memory overhead. Dependson e0932b6c1f94 ("mm: page_alloc: consolidate free page accounting") - see [1] [akpm@linux-foundation.org: s/if/else if/, per Johannes, stealth whitespace tweak] Link: https://lkml.kernel.org/r/20241028182653.3420139-1-yuzhao@google.com Link: https://lkml.kernel.org/r/0d0ddb33-fcdc-43e2-801f-0c1df2031afb@suse.cz [1] Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand") Signed-off-by: Yu Zhao <yuzhao@google.com> Reported-by: Link Lin <linkl@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | | mm: resolve faulty mmap_region() error path behaviourLorenzo Stoakes2024-11-061-54/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mmap_region() function is somewhat terrifying, with spaghetti-like control flow and numerous means by which issues can arise and incomplete state, memory leaks and other unpleasantness can occur. A large amount of the complexity arises from trying to handle errors late in the process of mapping a VMA, which forms the basis of recently observed issues with resource leaks and observable inconsistent state. Taking advantage of previous patches in this series we move a number of checks earlier in the code, simplifying things by moving the core of the logic into a static internal function __mmap_region(). Doing this allows us to perform a number of checks up front before we do any real work, and allows us to unwind the writable unmap check unconditionally as required and to perform a CONFIG_DEBUG_VM_MAPLE_TREE validation unconditionally also. We move a number of things here: 1. We preallocate memory for the iterator before we call the file-backed memory hook, allowing us to exit early and avoid having to perform complicated and error-prone close/free logic. We carefully free iterator state on both success and error paths. 2. The enclosing mmap_region() function handles the mapping_map_writable() logic early. Previously the logic had the mapping_map_writable() at the point of mapping a newly allocated file-backed VMA, and a matching mapping_unmap_writable() on success and error paths. We now do this unconditionally if this is a file-backed, shared writable mapping. If a driver changes the flags to eliminate VM_MAYWRITE, however doing so does not invalidate the seal check we just performed, and we in any case always decrement the counter in the wrapper. We perform a debug assert to ensure a driver does not attempt to do the opposite. 3. We also move arch_validate_flags() up into the mmap_region() function. This is only relevant on arm64 and sparc64, and the check is only meaningful for SPARC with ADI enabled. We explicitly add a warning for this arch if a driver invalidates this check, though the code ought eventually to be fixed to eliminate the need for this. With all of these measures in place, we no longer need to explicitly close the VMA on error paths, as we place all checks which might fail prior to a call to any driver mmap hook. This eliminates an entire class of errors, makes the code easier to reason about and more robust. Link: https://lkml.kernel.org/r/6e0becb36d2f5472053ac5d544c0edfe9b899e25.1730224667.git.lorenzo.stoakes@oracle.com Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails") Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reported-by: Jann Horn <jannh@google.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Mark Brown <broonie@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Xu <peterx@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 04:17:10 +0100