summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
| * | usb: typec: tcpm: Fix SINK_DISCOVERY current limit for Rp-defaultBadhri Jagan Sridharan2021-05-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a regression introduced by 1373fefc6243 ("usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby") When Source advertises Rp-default, tcpm would request 500mA when in SINK_DISCOVERY, Type-C spec advises the sink to follow BC1.2 current limits when Rp-default is advertised. [12750.503381] Requesting mux state 1, usb-role 2, orientation 1 [12750.503837] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [12751.003891] state change SNK_STARTUP -> SNK_DISCOVERY [12751.003900] Setting voltage/current limit 5000 mV 500 mA This patch restores the behavior where the tcpm would request 0mA when Rp-default is advertised by the source. [   73.174252] Requesting mux state 1, usb-role 2, orientation 1 [   73.174749] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [   73.674800] state change SNK_STARTUP -> SNK_DISCOVERY [   73.674808] Setting voltage/current limit 5000 mV 0 mA During SNK_DISCOVERY, Cap the current limit to PD_P_SNK_STDBY_MW / 5 only for slow_charger_loop case. Fixes: 1373fefc6243 ("usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Link: https://lore.kernel.org/r/20210510211756.3346954-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci: Add reset resume quirk for AMD xhci controller.Sandeep Singh2021-05-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One of AMD xhci controller require reset on resume. Occasionally AMD xhci controller does not respond to Stop endpoint command. Once the issue happens controller goes into bad state and in that case controller needs to be reset. Cc: <stable@vger.kernel.org> Signed-off-by: Sandeep Singh <sandeep.singh@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: xhci: Increase timeout for HC haltMaximilian Luz2021-05-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some devices (specifically the SC8180x based Surface Pro X with QCOM04A6) HC halt / xhci_halt() times out during boot. Manually binding the xhci-hcd driver at some point later does not exhibit this behavior. To work around this, double XHCI_MAX_HALT_USEC, which also resolves this issue. Cc: <stable@vger.kernel.org> Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci: Do not use GFP_KERNEL in (potentially) atomic contextChristophe JAILLET2021-05-131-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'xhci_urb_enqueue()' is passed a 'mem_flags' argument, because "URBs may be submitted in interrupt context" (see comment related to 'usb_submit_urb()' in 'drivers/usb/core/urb.c') So this flag should be used in all the calling chain. Up to now, 'xhci_check_maxpacket()' which is only called from 'xhci_urb_enqueue()', uses GFP_KERNEL. Be safe and pass the mem_flags to this function as well. Fixes: ddba5cd0aeff ("xhci: Use command structures when queuing commands on the command ring") Cc: <stable@vger.kernel.org> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci: Fix giving back cancelled URBs even if halted endpoint can't resetMathias Nyman2021-05-131-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") in 5.12 changes how cancelled URBs are given back. To cancel a URB xhci driver needs to stop the endpoint first. To clear a halted endpoint xhci driver needs to reset the endpoint. In rare cases when an endpoint halt (error) races with a endpoint stop we need to clear the reset before removing, and giving back the cancelled URB. The above change in 5.12 takes care of this, but it also relies on the reset endpoint completion handler to give back the cancelled URBs. There are cases when driver refuses to queue reset endpoint commands, for example when a link suddenly goes to an inactive error state. In this case the cancelled URB is never given back. Fix this by giving back the URB in the stop endpoint if queuing a reset endpoint command fails. Fixes: 9ebf30007858 ("xhci: Fix halted endpoint at stop endpoint command completion") CC: <stable@vger.kernel.org> # 5.12 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | xhci-pci: Allow host runtime PM as default for Intel Alder Lake xHCIAbhijeet Rao2021-05-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the same way as Intel Tiger Lake TCSS (Type-C Subsystem) the Alder Lake TCSS xHCI needs to be runtime suspended whenever possible to allow the TCSS hardware block to enter D3cold and thus save energy. Cc: stable@vger.kernel.org Signed-off-by: Abhijeet Rao <abhijeet.rao@intel.com> Signed-off-by: Nikunj A. Dadhania <nikunj.dadhania@intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20210512080816.866037-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: musb: Fix an error messageChristophe JAILLET2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'ret' is known to be 0 here. Initialize 'ret' with the expected error code before using it. Fixes: 0990366bab3c ("usb: musb: Add support for MediaTek musb controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMSKyle Tso2021-05-101-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Not_Supported Message is acceptable in VDM AMS. Redirect the VDM state machine to VDM_STATE_DONE when receiving Not_Supported and finish the VDM AMS. Also, after the loop in vdm_state_machine_work, add more conditions of VDM states to clear the vdm_sm_running flag because those are all stopping states when leaving the loop. In addition, finish the VDM AMS if the port partner responds BUSY. Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Fixes: 8d3a0578ad1a ("usb: typec: tcpm: Respond Wait if VDM state machine is running") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-3-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated workKyle Tso2021-05-101-10/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current design, DISCOVER_IDENTITY is queued to VDM state machine immediately in Ready states and never retries if it fails in the AMS. Move the process to a delayed work so that when it fails for some reasons (e.g. Sink Tx No Go), it can be retried by queueing the work again. Also fix a problem that the vdm_state is not set to a proper state if it is blocked by Collision Avoidance mechanism. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210507062300.1945009-2-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4Jack Pham2021-05-102-11/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") introduced retrieval of the PDOs when connected to a PD-capable source. But only the first 4 PDOs are received since that is the maximum number that can be fetched at a time given the MESSAGE_IN length limitation (16 bytes). However, as per the PD spec a connected source may advertise up to a maximum of 7 PDOs. If such a source is connected it's possible the PPM could have negotiated a power contract with one of the PDOs at index greater than 4, and would be reflected in the request data object's (RDO) object position field. This would result in an out-of-bounds access when the rdo_index() is used to index into the src_pdos array in ucsi_psy_get_voltage_now(). With the help of the UBSAN -fsanitize=array-bounds checker enabled this exact issue is revealed when connecting to a PD source adapter that advertise 5 PDOs and the PPM enters a contract having selected the 5th one. [ 151.545106][ T70] Unexpected kernel BRK exception at EL1 [ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP ... [ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c [ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328 ... [ 151.545542][ T70] Call trace: [ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c [ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0 [ 151.545550][ T70] dev_uevent+0x200/0x384 [ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8 [ 151.545557][ T70] power_supply_changed_work+0x174/0x31c [ 151.545562][ T70] process_one_work+0x244/0x6f0 [ 151.545564][ T70] worker_thread+0x3e0/0xa64 We can resolve this by instead retrieving and storing up to the maximum of 7 PDOs in the con->src_pdos array. This would involve two calls to the GET_PDOS command. Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") Fixes: 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode") Cc: stable@vger.kernel.org Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: fotg210-hcd: Fix an error messageChristophe JAILLET2021-05-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'retval' is known to be -ENODEV here. This is a hard-coded default error code which is not useful in the error message. Moreover, another error message is printed at the end of the error handling path. The corresponding error code (-ENOMEM) is more informative. So remove simplify the first error message. While at it, also remove the useless initialization of 'retval'. Fixes: 7d50195f6c50 ("usb: host: Faraday fotg210-hcd driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | docs: usb: function: Modify path nameWei Ming Chen2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Original path does not exists, so changed to "Documentation/ABI/testing/configfs-usb-gadget" Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: omap: improve extcon initializationMarcel Hamer2021-05-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When extcon is used in combination with dwc3, it is assumed that the dwc3 registers are untouched and as such are only configured if VBUS is valid or ID is tied to ground. In case VBUS is not valid or ID is floating, the registers are not configured as such during driver initialization, causing a wrong default state during boot. If the registers are not in a default state, because they are for instance touched by a boot loader, this can cause for a kernel error. Signed-off-by: Marcel Hamer <marcel@solidxs.se> Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: ucsi: Put fwnode in any case during ->probe()Andy Shevchenko2021-05-101-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | device_for_each_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface") Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210504222337.3151726-1-andy.shevchenko@gmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: typec: tcpm: Fix wrong handling in GET_SINK_CAPKyle Tso2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After receiving Sink Capabilities Message in GET_SINK_CAP AMS, it is incorrect to call tcpm_pd_handle_state because the Message is expected and the current state is not Ready states. The result of this incorrect operation ends in Soft Reset which is definitely wrong. Simply forwarding to Ready States is enough to finish the AMS. Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210503171849.2605302-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc2: Remove obsolete MODULE_ constants from platform.cMatthijs Kooijman2021-05-101-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally, the core and platform drivers were separate modules, so each had its own module info. Since commit 2d1165a4b95e (usb: dwc2: remove dwc2_platform.ko) platform.c is included in the core module, which now contains duplicate module info (from core.c and platform.c). Due to the linking order and modinfo implementation, running `modinfo` on the resulting dwc2.ko shows just the info from platform.c, rather than that from core.c, suggesting that I am the author of the entire dwc2 module. Since platform.c is just a minor part of the entire module, this removes its module info in favor of the info from core.c. Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl> Link: https://lore.kernel.org/r/20210503180538.64423-1-matthijs@stdin.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()Zhen Lei2021-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 6dd2565989b4 ("usb: dwc3: add imx8mp dwc3 glue layer driver") Reported-by: Hulk Robot <hulkci@huawei.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210508015310.1627-1-thunder.leizhen@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: imx8mp: detect dwc3 core node via compatible stringLi Jun2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New schema of usb controller DT-node should be named with prefix "^usb(@.*)?", dt changed the node name, but missed counter part change in driver, fix it by switching to use compatible string as the dwc3 core compatible string keeps "snps,dwc3" in all dt. Fixes: d1689cd3c0f4 ("arm64: dts: imx8mp: Use the correct name for child node "snps, dwc3"") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/1619765836-20387-1-git-send-email-jun.li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: gadget: Return success always for kick transfer in ep queueWesley Cheng2021-05-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an error is received when issuing a start or update transfer command, the error handler will stop all active requests (including the current USB request), and call dwc3_gadget_giveback() to notify function drivers of the requests which have been stopped. Avoid returning an error for kick transfer during EP queue, to remove duplicate cleanup operations on the request being queued. Fixes: 8d99087c2db8 ("usb: dwc3: gadget: Properly handle failed kick_transfer") cc: stable@vger.kernel.org Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: gadget: Free gadget structure only after freeing endpointsJack Pham2021-05-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget(). Fixes: e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210501093558.7375-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc2: Fix gadget DMA unmap directionPhil Elwell2021-05-102-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dwc2 gadget support maps and unmaps DMA buffers as necessary. When mapping and unmapping it uses the direction of the endpoint to select the direction of the DMA transfer, but this fails for Control OUT transfers because the unmap occurs after the endpoint direction has been reversed for the status phase. A possible solution would be to unmap the buffer before the direction is changed, but a safer, less invasive fix is to remember the buffer direction independently of the endpoint direction. Fixes: fe0b94abcdf6 ("usb: dwc2: gadget: manage ep0 state in software") Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Link: https://lore.kernel.org/r/20210506112200.2893922-1-phil@raspberrypi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: gadget: Rename EOPF event macros to SuspendJack Pham2021-05-103-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device event corresponding to End of Periodic Frame is only found on older IP revisions (2.10a and prior, according to a cursory SNPS databook search). On revisions 2.30a and newer, including DWC3.1, the same event value and corresponding DEVTEN bit were repurposed to indicate that the link has gone into suspend state (U3 or L2/L1). EOPF events had never been enabled before in this driver, and going forward we expect current and future DWC3-based devices won't likely to be using such old DWC3 IP revisions either. Hence rather than keeping the deprecated EOPF macro names let's rename them to indicate their usage for suspend events. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210428090111.3370-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: gadget: Enable suspend eventsJack Pham2021-05-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") introduced (nearly 5 years ago!) an interrupt handler for U3/L1-L2 suspend events. The problem is that these events aren't currently enabled in the DEVTEN register so the handler is never even invoked. Fix this simply by enabling the corresponding bit in dwc3_gadget_enable_irq() using the same revision check as found in the handler. Fixes: 72704f876f50 ("dwc3: gadget: Implement the suspend entry event handler") Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210428090111.3370-1-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: Restore the reference to ch9.hFabio Estevam2021-05-101-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Keep the textual reference to ch9.h as it was prior to commit caa93d9bd2d7 ("usb: Fix up movement of USB core kerneldoc location"). As linux/usb/ch9.h does not contain comments anymore, explain that drivers/usb/common/common.c includes such header and provides declarations of a few utilities routines for manipulating the data types from ch9.h. Also mention that drivers/usb/common/debug.c contains some functions for creating debug output. Fixes: caa93d9bd2d7 ("usb: Fix up movement of USB core kerneldoc location") Reported-by: Alan Stern <stern@rowland.harvard.edu> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210425153253.2542816-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: core: Add missing GHWPARAMS9 docThinh Nguyen2021-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add missing documentation for struct dwc3_hwparams new field hwparams9 to avoid kernel doc build warning. Fixes: 16710380d3aa ("usb: dwc3: Capture new capability register GHWPARAMS9") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/f4c491f7614e623755fafe640b7e690e7c5634e2.1619471127.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: dwc3: pci: Enable usb2-gadget-lpm-disable for Intel MerrifieldFerry Toth2021-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On Intel Merrifield LPM is causing host to reset port after a timeout. By disabling LPM entirely this is prevented. Fixes: 066c09593454 ("usb: dwc3: pci: Enable extcon driver for Intel Merrifield") Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210425150947.5862-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | cdc-wdm: untangle a circular dependency between callback and softintOliver Neukum2021-05-101-8/+22
| |/ | | | | | | | | | | | | | | | | | | | | We have a cycle of callbacks scheduling works which submit URBs with those callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20210426092622.20433-1-oneukum@suse.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'timers-urgent-2021-05-16' of ↵Linus Torvalds2021-05-163-3/+5
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixes for timers: - Use the ALARM feature check in the alarmtimer core code insted of the old method of checking for the set_alarm() callback. Drivers can have that callback set but the feature bit cleared. If such a RTC device is selected then alarms wont work. - Use a proper define to let the preprocessor check whether Hyper-V VDSO clocksource should be active. The code used a constant in an enum with #ifdef, which evaluates to always false and disabled the clocksource for VDSO" * tag 'timers-urgent-2021-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86 alarmtimer: Check RTC features instead of ops
| * | clocksource/drivers/hyper-v: Re-enable VDSO_CLOCKMODE_HVCLOCK on X86Vitaly Kuznetsov2021-05-142-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mohammed reports (https://bugzilla.kernel.org/show_bug.cgi?id=213029) the commit e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") broke vDSO on x86. The problem appears to be that VDSO_CLOCKMODE_HVCLOCK is an enum value in 'enum vdso_clock_mode' and '#ifdef VDSO_CLOCKMODE_HVCLOCK' branch evaluates to false (it is not a define). Use a dedicated HAVE_VDSO_CLOCKMODE_HVCLOCK define instead. Fixes: e4ab4658f1cf ("clocksource/drivers/hyper-v: Handle vDSO differences inline") Reported-by: Mohammed Gamal <mgamal@redhat.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20210513073246.1715070-1-vkuznets@redhat.com
| * | alarmtimer: Check RTC features instead of opsAlexandre Belloni2021-05-111-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RTC drivers used to leave .set_alarm() NULL in order to signal the RTC device doesn't support alarms. The drivers are now clearing the RTC_FEATURE_ALARM bit for that purpose in order to keep the rtc_class_ops structure const. So now, .set_alarm() is set unconditionally and this possibly causes the alarmtimer code to select an RTC device that doesn't support alarms. Test RTC_FEATURE_ALARM instead of relying on ops->set_alarm to determine whether alarms are available. Fixes: 7ae41220ef58 ("rtc: introduce features bitfield") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210511014516.563031-1-alexandre.belloni@bootlin.com
* | Merge tag 'for-linus-5.13b-rc2-tag' of ↵Linus Torvalds2021-05-166-17/+34
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - two patches for error path fixes - a small series for fixing a regression with swiotlb with Xen on Arm * tag 'for-linus-5.13b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/swiotlb: check if the swiotlb has already been initialized arm64: do not set SWIOTLB_NO_FORCE when swiotlb is required xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.h xen/unpopulated-alloc: fix error return code in fill_list() xen/gntdev: fix gntdev_mmap() error exit path
| * | xen/swiotlb: check if the swiotlb has already been initializedStefano Stabellini2021-05-142-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xen_swiotlb_init calls swiotlb_late_init_with_tbl, which fails with -ENOMEM if the swiotlb has already been initialized. Add an explicit check io_tlb_default_mem != NULL at the beginning of xen_swiotlb_init. If the swiotlb is already initialized print a warning and return -EEXIST. On x86, the error propagates. On ARM, we don't actually need a special swiotlb buffer (yet), any buffer would do. So ignore the error and continue. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210512201823.1963-3-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
| * | arm64: do not set SWIOTLB_NO_FORCE when swiotlb is requiredChristoph Hellwig2021-05-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although SWIOTLB_NO_FORCE is meant to allow later calls to swiotlb_init, today dma_direct_map_page returns error if SWIOTLB_NO_FORCE. For now, without a larger overhaul of SWIOTLB_NO_FORCE, the best we can do is to avoid setting SWIOTLB_NO_FORCE in mem_init when we know that it is going to be required later (e.g. Xen requires it). CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: catalin.marinas@arm.com CC: will@kernel.org CC: linux-arm-kernel@lists.infradead.org Fixes: 2726bf3ff252 ("swiotlb: Make SWIOTLB_NO_FORCE perform no allocation") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210512201823.1963-2-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
| * | xen/arm: move xen_swiotlb_detect to arm/swiotlb-xen.hStefano Stabellini2021-05-142-13/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move xen_swiotlb_detect to a static inline function to make it available to !CONFIG_XEN builds. CC: boris.ostrovsky@oracle.com CC: jgross@suse.com Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210512201823.1963-1-sstabellini@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
| * | xen/unpopulated-alloc: fix error return code in fill_list()Zhen Lei2021-05-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a4574f63edc6 ("mm/memremap_pages: convert to 'struct range'") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210508021913.1727-1-thunder.leizhen@huawei.com Signed-off-by: Juergen Gross <jgross@suse.com>
| * | xen/gntdev: fix gntdev_mmap() error exit pathJuergen Gross2021-05-101-1/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d3eeb1d77c5d0af ("xen/gntdev: use mmu_interval_notifier_insert") introduced an error in gntdev_mmap(): in case the call of mmu_interval_notifier_insert_locked() fails the exit path should not call mmu_interval_notifier_remove(), as this might result in NULL dereferences. One reason for failure is e.g. a signal pending for the running process. Fixes: d3eeb1d77c5d0af ("xen/gntdev: use mmu_interval_notifier_insert") Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Luca Fancellu <luca.fancellu@arm.com> Link: https://lore.kernel.org/r/20210423054038.26696-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* | Merge tag 'x86_urgent_for_v5.13_rc2' of ↵Linus Torvalds2021-05-1629-113/+124
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The three SEV commits are not really urgent material. But we figured since getting them in now will avoid a huge amount of conflicts between future SEV changes touching tip, the kvm and probably other trees, sending them to you now would be best. The idea is that the tip, kvm etc branches for 5.14 will all base ontop of -rc2 and thus everything will be peachy. What is more, those changes are purely mechanical and defines movement so they should be fine to go now (famous last words). Summary: - Enable -Wundef for the compressed kernel build stage - Reorganize SEV code to streamline and simplify future development" * tag 'x86_urgent_for_v5.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/compressed: Enable -Wundef x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFG x86/sev: Move GHCB MSR protocol and NAE definitions in a common header x86/sev-es: Rename sev-es.{ch} to sev.{ch}
| * | x86/boot/compressed: Enable -WundefNick Desaulniers2021-05-123-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A discussion around -Wundef showed that there were still a few boolean Kconfigs where #if was used rather than #ifdef to guard different code. Kconfig doesn't define boolean configs, which can result in -Wundef warnings. arch/x86/boot/compressed/Makefile resets the CFLAGS used for this directory, and doesn't re-enable -Wundef as the top level Makefile does. If re-added, with RANDOMIZE_BASE and X86_NEED_RELOCS disabled, the following warnings are visible. arch/x86/boot/compressed/misc.h:82:5: warning: 'CONFIG_RANDOMIZE_BASE' is not defined, evaluates to 0 [-Wundef] ^ arch/x86/boot/compressed/misc.c:175:5: warning: 'CONFIG_X86_NEED_RELOCS' is not defined, evaluates to 0 [-Wundef] ^ Simply fix these and re-enable this warning for this directory. Suggested-by: Nathan Chancellor <nathan@kernel.org> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20210422190450.3903999-1-ndesaulniers@google.com
| * | x86/msr: Rename MSR_K8_SYSCFG to MSR_AMD64_SYSCFGBrijesh Singh2021-05-1014-26/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SYSCFG MSR continued being updated beyond the K8 family; drop the K8 name from it. Suggested-by: Borislav Petkov <bp@alien8.de> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20210427111636.1207-4-brijesh.singh@amd.com
| * | x86/sev: Move GHCB MSR protocol and NAE definitions in a common headerBrijesh Singh2021-05-104-70/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The guest and the hypervisor contain separate macros to get and set the GHCB MSR protocol and NAE event fields. Consolidate the GHCB protocol definitions and helper macros in one place. Leave the supported protocol version define in separate files to keep the guest and hypervisor flexibility to support different GHCB version in the same release. There is no functional change intended. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20210427111636.1207-3-brijesh.singh@amd.com
| * | x86/sev-es: Rename sev-es.{ch} to sev.{ch}Brijesh Singh2021-05-1011-15/+15
| |/ | | | | | | | | | | | | | | | | | | | | | | SEV-SNP builds upon the SEV-ES functionality while adding new hardware protection. Version 2 of the GHCB specification adds new NAE events that are SEV-SNP specific. Rename the sev-es.{ch} to sev.{ch} so that all SEV* functionality can be consolidated in one place. Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Joerg Roedel <jroedel@suse.de> Link: https://lkml.kernel.org/r/20210427111636.1207-2-brijesh.singh@amd.com
* | Merge tag 'powerpc-5.13-3' of ↵Linus Torvalds2021-05-1613-75/+175
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a regression in the conversion of the 64-bit BookE interrupt entry to C. - Fix KVM hosts running with the hash MMU since the recent KVM gfn changes. - Fix a deadlock in our paravirt spinlocks when hcall tracing is enabled. - Several fixes for oopses in our runtime code patching for security mitigations. - A couple of minor fixes for the recent conversion of 32-bit interrupt entry/exit to C. - Fix __get_user() causing spurious crashes in sigreturn due to a bad inline asm constraint, spotted with GCC 11. - A fix for the way we track IRQ masking state vs NMI interrupts when using the new scv system call entry path. - A couple more minor fixes. Thanks to Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Naveen N. Rao, Nicholas Piggin Paul Menzel, and Sean Christopherson. * tag 'powerpc-5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64e/interrupt: Fix nvgprs being clobbered powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabled powerpc/64s: Fix stf mitigation patching w/strict RWX & hash powerpc/64s: Fix entry flush patching w/strict RWX & hash powerpc/64s: Fix crashes when toggling entry flush barrier powerpc/64s: Fix crashes when toggling stf barrier KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMU powerpc/legacy_serial: Fix UBSAN: array-index-out-of-bounds powerpc/signal: Fix possible build failure with unsafe_copy_fpr_{to/from}_user powerpc/uaccess: Fix __get_user() with CONFIG_CC_HAS_ASM_GOTO_OUTPUT powerpc/pseries: warn if recursing into the hcall tracing code powerpc/pseries: use notrace hcall variant for H_CEDE idle powerpc/pseries: Don't trace hcall tracing wrapper powerpc/pseries: Fix hcall tracing recursion in pv queued spinlocks powerpc/syscall: Calling kuap_save_and_lock() is wrong powerpc/interrupts: Fix kuep_unlock() call
| * | powerpc/64e/interrupt: Fix nvgprs being clobberedNicholas Piggin2021-05-141-14/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some interrupt handlers have an "extra" that saves 1 or 2 registers (r14, r15) in the paca save area and makes them available to use by the handler. The change to always save nvgprs in exception handlers lead to some interrupt handlers saving those scratch r14 / r15 registers into the interrupt frame's GPR saves, which get restored on interrupt exit. Fix this by always reloading those scratch registers from paca before the EXCEPTION_COMMON that saves nvgprs. Fixes: 4228b2c3d20e ("powerpc/64e/interrupt: always save nvgprs on interrupt") Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210514044008.1955783-1-npiggin@gmail.com
| * | powerpc/64s: Make NMI record implicitly soft-masked code as irqs disabledNicholas Piggin2021-05-141-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | scv support introduced the notion of code that implicitly soft-masks irqs due to the instruction addresses. This is required because scv enters the kernel with MSR[EE]=1. If a NMI (including soft-NMI) interrupt hits when we are implicitly soft-masked then its regs->softe does not reflect this because it is derived from the explicit soft mask state (paca->irq_soft_mask). This makes arch_irq_disabled_regs(regs) return false. This can trigger a warning in the soft-NMI watchdog code (shown below). Fix it by having NMI interrupts set regs->softe to disabled in case of interrupting an implicit soft-masked region. ------------[ cut here ]------------ WARNING: CPU: 41 PID: 1103 at arch/powerpc/kernel/watchdog.c:259 soft_nmi_interrupt+0x3e4/0x5f0 CPU: 41 PID: 1103 Comm: (spawn) Not tainted NIP: c000000000039534 LR: c000000000039234 CTR: c000000000009a00 REGS: c000007fffbcf940 TRAP: 0700 Not tainted MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 22042482 XER: 200400ad CFAR: c000000000039260 IRQMASK: 3 GPR00: c000000000039204 c000007fffbcfbe0 c000000001d6c300 0000000000000003 GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020 GPR08: 0000007ffd4e0000 0000000000000000 c000007ffffceb00 7265677368657265 GPR12: 9000000000009033 c000007ffffceb00 00000f7075bf4480 000000000000002a GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000 GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040 GPR24: 0000000000000000 0000000000000029 c000000001dae058 0000000000000029 GPR28: 0000000000000000 0000000000000800 0000000000000009 c000007fffbcfd60 NIP [c000000000039534] soft_nmi_interrupt+0x3e4/0x5f0 LR [c000000000039234] soft_nmi_interrupt+0xe4/0x5f0 Call Trace: [c000007fffbcfbe0] [c000000000039204] soft_nmi_interrupt+0xb4/0x5f0 (unreliable) [c000007fffbcfcf0] [c00000000000c0e8] soft_nmi_common+0x138/0x1c4 --- interrupt: 900 at end_real_trampolines+0x0/0x1000 NIP: c000000000003000 LR: 00007ca426adb03c CTR: 900000000280f033 REGS: c000007fffbcfd60 TRAP: 0900 MSR: 9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 44042482 XER: 200400ad CFAR: 00007ca426946020 IRQMASK: 0 GPR00: 00000000000000ad 00007ffffa45d050 00007ca426b07f00 0000000000000035 GPR04: 00007ffffa45d078 0000000000000000 0000000000000008 0000000000000020 GPR08: 0000000000000000 0000000000100000 0000000010000000 00007ffffa45d110 GPR12: 0000000000000001 00007ca426d4e680 00000f7075bf4480 000000000000002a GPR16: 00000f705745a528 00007ffffa45ddd8 00000f70574d0008 0000000000000000 GPR20: 00000f7075c58d70 00000f7057459c38 0000000000000001 0000000000000040 GPR24: 0000000000000000 00000f7057473f68 0000000000000003 000000000000041b GPR28: 00007ffffa45d4c4 0000000000000035 0000000000000000 00000f7057473f68 NIP [c000000000003000] end_real_trampolines+0x0/0x1000 LR [00007ca426adb03c] 0x7ca426adb03c --- interrupt: 900 Instruction dump: 60000000 60000000 60420000 38600001 482b3ae5 60000000 e93f0138 a36d0008 7daa6b78 71290001 7f7907b4 4082fd34 <0fe00000> 4bfffd2c 60420000 ea6100a8 ---[ end trace dc75f67d819779da ]--- Fixes: 118178e62e2e ("powerpc: move NMI entry/exit code into wrapper") Reported-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210503111708.758261-1-npiggin@gmail.com
| * | powerpc/64s: Fix stf mitigation patching w/strict RWX & hashMichael Ellerman2021-05-141-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The stf entry barrier fallback is unsafe to execute in a semi-patched state, which can happen when enabling/disabling the mitigation with strict kernel RWX enabled and using the hash MMU. See the previous commit for more details. Fix it by changing the order in which we patch the instructions. Note the stf barrier fallback is only used on Power6 or earlier. Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210513140800.1391706-2-mpe@ellerman.id.au
| * | powerpc/64s: Fix entry flush patching w/strict RWX & hashMichael Ellerman2021-05-141-16/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entry flush mitigation can be enabled/disabled at runtime. When this happens it results in the kernel patching its own instructions to enable/disable the mitigation sequence. With strict kernel RWX enabled instruction patching happens via a secondary mapping of the kernel text, so that we don't have to make the primary mapping writable. With the hash MMU this leads to a hash fault, which causes us to execute the exception entry which contains the entry flush mitigation. This means we end up executing the entry flush in a semi-patched state, ie. after we have patched the first instruction but before we patch the second or third instruction of the sequence. On machines with updated firmware the entry flush is a series of special nops, and it's safe to to execute in a semi-patched state. However when using the fallback flush the sequence is mflr/branch/mtlr, and so it's not safe to execute if we have patched out the mflr but not the other two instructions. Doing so leads to us corrputing LR, leading to an oops, for example: # echo 0 > /sys/kernel/debug/powerpc/entry_flush kernel tried to execute exec-protected page (c000000002971000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel instruction fetch Faulting instruction address: 0xc000000002971000 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 0 PID: 2215 Comm: bash Not tainted 5.13.0-rc1-00010-gda3bb206c9ce #1 NIP: c000000002971000 LR: c000000002971000 CTR: c000000000120c40 REGS: c000000013243840 TRAP: 0400 Not tainted (5.13.0-rc1-00010-gda3bb206c9ce) MSR: 8000000010009033 <SF,EE,ME,IR,DR,RI,LE> CR: 48428482 XER: 00000000 ... NIP 0xc000000002971000 LR 0xc000000002971000 Call Trace: do_patch_instruction+0xc4/0x340 (unreliable) do_entry_flush_fixups+0x100/0x3b0 entry_flush_set+0x50/0xe0 simple_attr_write+0x160/0x1a0 full_proxy_write+0x8c/0x110 vfs_write+0xf0/0x340 ksys_write+0x84/0x140 system_call_exception+0x164/0x2d0 system_call_common+0xec/0x278 The simplest fix is to change the order in which we patch the instructions, so that the sequence is always safe to execute. For the non-fallback flushes it doesn't matter what order we patch in. Fixes: bd573a81312f ("powerpc/mm/64s: Allow STRICT_KERNEL_RWX again") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210513140800.1391706-1-mpe@ellerman.id.au
| * | powerpc/64s: Fix crashes when toggling entry flush barrierMichael Ellerman2021-05-141-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The entry flush mitigation can be enabled/disabled at runtime via a debugfs file (entry_flush), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20 Shows that we returned to userspace with a corrupted LR that points into the kernel, due to executing the partially patched call to the fallback entry flush (ie. we missed the LR restore). Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. Fixes: f79643787e0a ("powerpc/64s: flush L1D on kernel entry") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210506044959.1298123-2-mpe@ellerman.id.au
| * | powerpc/64s: Fix crashes when toggling stf barrierMichael Ellerman2021-05-141-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The STF (store-to-load forwarding) barrier mitigation can be enabled/disabled at runtime via a debugfs file (stf_barrier), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: User access of kernel address (c00000003fff5af0) - exploit attempt? (uid: 0) segfault (11) at c00000003fff5af0 nip 7fff8ad12198 lr 7fff8ad121f8 code 1 code: 40820128 e93c00d0 e9290058 7c292840 40810058 38600000 4bfd9a81 e8410018 code: 2c030006 41810154 3860ffb6 e9210098 <e94d8ff0> 7d295279 39400000 40820a3c Shows that we returned to userspace without restoring the user r13 value, due to executing the partially patched STF exit code. Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. Fixes: a048a07d7f45 ("powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210506044959.1298123-1-mpe@ellerman.id.au
| * | KVM: PPC: Book3S HV: Fix kvm_unmap_gfn_range_hv() for Hash MMUMichael Ellerman2021-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks") fixed kvm_unmap_gfn_range_hv() by adding a for loop over each gfn in the range. But for the Hash MMU it repeatedly calls kvm_unmap_rmapp() with the first gfn of the range, rather than iterating through the range. This exhibits as strange guest behaviour, sometimes crashing in firmare, or booting and then guest userspace crashing unexpectedly. Fix it by passing the iterator, gfn, to kvm_unmap_rmapp(). Fixes: 32b48bf8514c ("KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210511105459.800788-1-mpe@ellerman.id.au
| * | powerpc/legacy_serial: Fix UBSAN: array-index-out-of-boundsChristophe Leroy2021-05-121-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UBSAN complains when a pointer is calculated with invalid 'legacy_serial_console' index, allthough the index is verified before dereferencing the pointer. Fix it by checking 'legacy_serial_console' validity before calculating pointers. Fixes: 0bd3f9e953bd ("powerpc/legacy_serial: Use early_ioremap()") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210511010712.750096-1-mpe@ellerman.id.au
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 10:08:04 +0100