| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Tariq Toukan says:
====================
mlx5e use TLS TX pool to improve connection rate
To offload encryption operations, the mlx5 device maintains state and
keeps track of every kTLS device-offloaded connection. Two HW objects
are used per TX context of a kTLS offloaded connection: a. Transport
interface send (TIS) object, to reach the HW context. b. Data Encryption
Key (DEK) to perform the crypto operations.
These two objects are created and destroyed per TLS TX context, via FW
commands. In total, 4 FW commands are issued per TLS TX context, which
seriously limits the connection rate.
In this series, we aim to save creation and destroy of TIS objects by
recycling them. Upon recycling of a TIS, the HW still needs to be
notified for the re-mapping between a TIS and a context. This is done by
posting WQEs via an SQ, significantly faster API than the FW command
interface.
A pool is used for recycling. The pool dynamically interacts to the load
and connection rate, growing and shrinking accordingly.
Saving the TIS FW commands per context increases connection rate by ~42%,
from 11.6K to 16.5K connections per sec.
Connection rate is still limited by FW bottleneck due to the remaining
per context FW commands (DEK create/destroy). This will soon be addressed
in a followup series. By combining the two series, the FW bottleneck
will be released, and a significantly higher (about 100K connections per
sec) kTLS TX device-offloaded connection rate is reached.
====================
Link: https://lore.kernel.org/r/20220727094346.10540-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Let the TLS TX recycle pool be more flexible in size, by continuously
and dynamically allocating and releasing HW resources in response to
changes in the connections rate and load.
Allocate and release pool entries in bulks (16). Use a workqueue to
release/allocate in the background. Allocate a new bulk when the pool
size goes lower than the low threshold (1K). Symmetric operation is done
when the pool size gets greater than the upper threshold (4K).
Every idle pool entry holds: 1 TIS, 1 DEK (HW resources), in addition to
~100 bytes in host memory.
Start with an empty pool to minimize memory and HW resources waste for
non-TLS users that have the device-offload TLS enabled.
Upon a new request, in case the pool is empty, do not wait for a whole bulk
allocation to complete. Instead, trigger an instant allocation of a single
resource to reduce latency.
Performance tests:
Before: 11,684 CPS
After: 16,556 CPS
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The transport interface send (TIS) object is responsible for performing
all transport related operations of the transmit side. The ConnectX HW
uses a TIS object to save and access the TLS crypto information and state
of an offloaded TX kTLS connection.
Before this patch, we used to create a new TIS per connection and destroy
it once it’s closed. Every create and destroy of a TIS is a FW command.
Same applies for the private TLS context, where we used to dynamically
allocate and free it per connection.
Resources recycling reduce the impact of the allocation/free operations
and helps speeding up the connection rate.
In this feature we maintain a pool of TX objects and use it to recycle
the resources instead of re-creating them per connection.
A cached TIS popped from the pool is updated to serve the new connection
via the fast-path HW interface, updating the tls static and progress
params. This is a very fast operation, significantly faster than FW
commands.
On recycling, a WQE fence is required after the context params change.
This guarantees that the data is sent after the context has been
successfully updated in hardware, and that the context modification
doesn't interfere with existing traffic.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Let the caller of mlx5e_ktls_tx_handle_ooo() take care of updating the
stats, according to the returned value. As the switch/case blocks are
already there, this change saves unnecessary branches in the handler.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
TLS TIS objects have a defined role in mapping and reaching the HW TLS
contexts. Some standard TIS attributes (like LAG port affinity) are
not relevant for them.
Use a dedicated TLS TIS create function instead of the generic
mlx5e_create_tis.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Multiple TLS device-offloaded contexts can be added in parallel via
concurrent calls to .tls_dev_add, while calls to .tls_dev_del are
sequential in tls_device_gc_task.
This is not a sustainable behavior. This creates a rate gap between add
and del operations (addition rate outperforms the deletion rate). When
running for enough time, the TLS device resources could get exhausted,
failing to offload new connections.
Replace the single-threaded garbage collector work with a per-context
alternative, so they can be handled on several cores in parallel. Use
a new dedicated destruct workqueue for this.
Tested with mlx5 device:
Before: 22141 add/sec, 103 del/sec
After: 11684 add/sec, 11684 del/sec
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |/
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
TLS context destructor can be run in atomic context. Cleanup operations
for device-offloaded contexts could require access and interaction with
the device callbacks, which might sleep. Hence, the cleanup of such
contexts must be deferred and completed inside an async work.
For all others, this is not necessary, as cleanup is atomic. Invoke
cleanup immediately for them, avoiding queueing redundant gc work.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
The return from the call to tls_rx_msg_size() is int, it can be
a negative error code, however this is being assigned to an
unsigned long variable 'sz', so making 'sz' an int.
Eliminate the following coccicheck warning:
./net/tls/tls_strp.c:211:6-8: WARNING: Unsigned expression compared with zero: sz < 0
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220728031019.32838-1-yang.lee@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Jakub Kicinski says:
====================
tls: rx: follow ups to rx work
A selection of unrelated changes. First some selftest polishing.
Next a change to rcvtimeo handling for locking based on an exchange
with Eric. Follow up to Paolo's comments from yesterday. Last but
not least a fix to a false positive warning, turns out I've been
testing with DEBUG_NET=n this whole time.
====================
Link: https://lore.kernel.org/r/20220727031524.358216-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
I went too far in the accessor conversion, we can't use tls_strp_msg()
after decryption because the message may not be ready. What we care
about on this path is that the output skb is detached, i.e. we didn't
somehow just turn around and used the input skb with its TCP data
still attached. So look at the anchor directly.
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Paolo points out that there seems to be no strong reason strparser
users a single threaded workqueue. Perhaps there were some performance
or pinning considerations? Since we don't know (and it's the slow path)
let's default to the most natural, multi-threaded choice.
Also rename the workqueue to "tls-".
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Eric indicates that restarting rcvtimeo on every wait may be fine.
I thought that we should consider it cumulative, and made
tls_rx_reader_lock() return the remaining timeo after acquiring
the reader lock.
tls_rx_rec_wait() gets its timeout passed in by value so it
does not keep track of time previously spent.
Make the lock waiting consistent with tls_rx_rec_wait() - don't
keep track of time spent.
Read the timeo fresh in tls_rx_rec_wait().
It's unclear to me why callers are supposed to cache the value.
Link: https://lore.kernel.org/all/CANn89iKcmSfWgvZjzNGbsrndmCch2HC_EPZ7qmGboDNaWoviNQ@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |/
|
|
|
|
|
|
|
|
|
| |
Add a handful of memory randomizations and precise length checks.
Nothing is really broken here, I did this to increase confidence
when debugging. It does fix a GCC warning, tho. Apparently GCC
recognizes that memory needs to be initialized for send() but
does not recognize that for write().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |
|
|
|
|
|
|
| |
delete extra space and tab in blank line, there is no functional change.
Signed-off-by: Xie Shaowen <studentxswpy@163.com>
Link: https://lore.kernel.org/r/20220727081253.3043941-1-studentxswpy@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| |\
| |
| |
| |
| |
| | |
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |\
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter, no known blockers for
the release.
Current release - regressions:
- wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop(), fix
taking the lock before its initialized
- Bluetooth: mgmt: fix double free on error path
Current release - new code bugs:
- eth: ice: fix tunnel checksum offload with fragmented traffic
Previous releases - regressions:
- tcp: md5: fix IPv4-mapped support after refactoring, don't take the
pure v6 path
- Revert "tcp: change pingpong threshold to 3", improving detection
of interactive sessions
- mld: fix netdev refcount leak in mld_{query | report}_work() due to
a race
- Bluetooth:
- always set event mask on suspend, avoid early wake ups
- L2CAP: fix use-after-free caused by l2cap_chan_put
- bridge: do not send empty IFLA_AF_SPEC attribute
Previous releases - always broken:
- ping6: fix memleak in ipv6_renew_options()
- sctp: prevent null-deref caused by over-eager error paths
- virtio-net: fix the race between refill work and close, resulting
in NAPI scheduled after close and a BUG()
- macsec:
- fix three netlink parsing bugs
- avoid breaking the device state on invalid change requests
- fix a memleak in another error path
Misc:
- dt-bindings: net: ethernet-controller: rework 'fixed-link' schema
- two more batches of sysctl data race adornment"
* tag 'net-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
stmmac: dwmac-mediatek: fix resource leak in probe
ipv6/addrconf: fix a null-ptr-deref bug for ip6_ptr
net: ping6: Fix memleak in ipv6_renew_options().
net/funeth: Fix fun_xdp_tx() and XDP packet reclaim
sctp: leave the err path free in sctp_stream_init to sctp_stream_free
sfc: disable softirqs for ptp TX
ptp: ocp: Select CRC16 in the Kconfig.
tcp: md5: fix IPv4-mapped support
virtio-net: fix the race between refill work and close
mptcp: Do not return EINPROGRESS when subflow creation succeeds
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
Bluetooth: Always set event mask on suspend
Bluetooth: mgmt: Fix double free on error path
wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
netfilter: nft_queue: only allow supported familes and hooks
...
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
If mediatek_dwmac_clks_config() fails, then call stmmac_remove_config_dt()
before returning. Otherwise it is a resource leak.
Fixes: fa4b3ca60e80 ("stmmac: dwmac-mediatek: fix clock issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YuJ4aZyMUlG6yGGa@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Change net device's MTU to smaller than IPV6_MIN_MTU or unregister
device while matching route. That may trigger null-ptr-deref bug
for ip6_ptr probability as following.
=========================================================
BUG: KASAN: null-ptr-deref in find_match.part.0+0x70/0x134
Read of size 4 at addr 0000000000000308 by task ping6/263
CPU: 2 PID: 263 Comm: ping6 Not tainted 5.19.0-rc7+ #14
Call trace:
dump_backtrace+0x1a8/0x230
show_stack+0x20/0x70
dump_stack_lvl+0x68/0x84
print_report+0xc4/0x120
kasan_report+0x84/0x120
__asan_load4+0x94/0xd0
find_match.part.0+0x70/0x134
__find_rr_leaf+0x408/0x470
fib6_table_lookup+0x264/0x540
ip6_pol_route+0xf4/0x260
ip6_pol_route_output+0x58/0x70
fib6_rule_lookup+0x1a8/0x330
ip6_route_output_flags_noref+0xd8/0x1a0
ip6_route_output_flags+0x58/0x160
ip6_dst_lookup_tail+0x5b4/0x85c
ip6_dst_lookup_flow+0x98/0x120
rawv6_sendmsg+0x49c/0xc70
inet_sendmsg+0x68/0x94
Reproducer as following:
Firstly, prepare conditions:
$ip netns add ns1
$ip netns add ns2
$ip link add veth1 type veth peer name veth2
$ip link set veth1 netns ns1
$ip link set veth2 netns ns2
$ip netns exec ns1 ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1
$ip netns exec ns2 ip -6 addr add 2001:0db8:0:f101::2/64 dev veth2
$ip netns exec ns1 ifconfig veth1 up
$ip netns exec ns2 ifconfig veth2 up
$ip netns exec ns1 ip -6 route add 2000::/64 dev veth1 metric 1
$ip netns exec ns2 ip -6 route add 2001::/64 dev veth2 metric 1
Secondly, execute the following two commands in two ssh windows
respectively:
$ip netns exec ns1 sh
$while true; do ip -6 addr add 2001:0db8:0:f101::1/64 dev veth1; ip -6 route add 2000::/64 dev veth1 metric 1; ping6 2000::2; done
$ip netns exec ns1 sh
$while true; do ip link set veth1 mtu 1000; ip link set veth1 mtu 1500; sleep 5; done
It is because ip6_ptr has been assigned to NULL in addrconf_ifdown() firstly,
then ip6_ignore_linkdown() accesses ip6_ptr directly without NULL check.
cpu0 cpu1
fib6_table_lookup
__find_rr_leaf
addrconf_notify [ NETDEV_CHANGEMTU ]
addrconf_ifdown
RCU_INIT_POINTER(dev->ip6_ptr, NULL)
find_match
ip6_ignore_linkdown
So we can add NULL check for ip6_ptr before using in ip6_ignore_linkdown() to
fix the null-ptr-deref bug.
Fixes: dcd1f572954f ("net/ipv6: Remove fib6_idev")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220728013307.656257-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
When we close ping6 sockets, some resources are left unfreed because
pingv6_prot is missing sk->sk_prot->destroy(). As reported by
syzbot [0], just three syscalls leak 96 bytes and easily cause OOM.
struct ipv6_sr_hdr *hdr;
char data[24] = {0};
int fd;
hdr = (struct ipv6_sr_hdr *)data;
hdr->hdrlen = 2;
hdr->type = IPV6_SRCRT_TYPE_4;
fd = socket(AF_INET6, SOCK_DGRAM, NEXTHDR_ICMP);
setsockopt(fd, IPPROTO_IPV6, IPV6_RTHDR, data, 24);
close(fd);
To fix memory leaks, let's add a destroy function.
Note the socket() syscall checks if the GID is within the range of
net.ipv4.ping_group_range. The default value is [1, 0] so that no
GID meets the condition (1 <= GID <= 0). Thus, the local DoS does
not succeed until we change the default value. However, at least
Ubuntu/Fedora/RHEL loosen it.
$ cat /usr/lib/sysctl.d/50-default.conf
...
-net.ipv4.ping_group_range = 0 2147483647
Also, there could be another path reported with these options, and
some of them require CAP_NET_RAW.
setsockopt
IPV6_ADDRFORM (inet6_sk(sk)->pktoptions)
IPV6_RECVPATHMTU (inet6_sk(sk)->rxpmtu)
IPV6_HOPOPTS (inet6_sk(sk)->opt)
IPV6_RTHDRDSTOPTS (inet6_sk(sk)->opt)
IPV6_RTHDR (inet6_sk(sk)->opt)
IPV6_DSTOPTS (inet6_sk(sk)->opt)
IPV6_2292PKTOPTIONS (inet6_sk(sk)->opt)
getsockopt
IPV6_FLOWLABEL_MGR (inet6_sk(sk)->ipv6_fl_list)
For the record, I left a different splat with syzbot's one.
unreferenced object 0xffff888006270c60 (size 96):
comm "repro2", pid 231, jiffies 4294696626 (age 13.118s)
hex dump (first 32 bytes):
01 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 ....D...........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000f6bc7ea9>] sock_kmalloc (net/core/sock.c:2564 net/core/sock.c:2554)
[<000000006d699550>] do_ipv6_setsockopt.constprop.0 (net/ipv6/ipv6_sockglue.c:715)
[<00000000c3c3b1f5>] ipv6_setsockopt (net/ipv6/ipv6_sockglue.c:1024)
[<000000007096a025>] __sys_setsockopt (net/socket.c:2254)
[<000000003a8ff47b>] __x64_sys_setsockopt (net/socket.c:2265 net/socket.c:2262 net/socket.c:2262)
[<000000007c409dcb>] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[<00000000e939c4a9>] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[0]: https://syzkaller.appspot.com/bug?extid=a8430774139ec3ab7176
Fixes: 6d0bfe226116 ("net: ipv6: Add IPv6 support to the ping socket.")
Reported-by: syzbot+a8430774139ec3ab7176@syzkaller.appspotmail.com
Reported-by: Ayushman Dutta <ayudutta@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220728012220.46918-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The current implementation of fun_xdp_tx(), used for XPD_TX, is
incorrect in that it takes an address/length pair and later releases it
with page_frag_free(). It is OK for XDP_TX but the same code is used by
ndo_xdp_xmit. In that case it loses the XDP memory type and releases the
packet incorrectly for some of the types. Assorted breakage follows.
Change fun_xdp_tx() to take xdp_frame and rely on xdp_return_frame() in
reclaim.
Fixes: db37bc177dae ("net/funeth: add the data path")
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Link: https://lore.kernel.org/r/20220726215923.7887-1-dmichail@fungible.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | |\
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-26
This series contains updates to ice driver only.
Przemyslaw corrects accounting for VF VLANs to allow for correct number
of VLANs for untrusted VF. He also correct issue with checksum offload
on VXLAN tunnels.
Ani allows for two VSIs to share the same MAC address.
Maciej corrects checked bits for descriptor completion of loopback
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not setup vlan for loopback VSI
ice: check (DD | EOF) bits on Rx descriptor rather than (EOP | RS)
ice: Fix VSIs unable to share unicast MAC
ice: Fix tunnel checksum offload with fragmented traffic
ice: Fix max VLANs available for VF
====================
Link: https://lore.kernel.org/r/20220726204646.2171589-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Currently loopback test is failiing due to the error returned from
ice_vsi_vlan_setup(). Skip calling it when preparing loopback VSI.
Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Tx side sets EOP and RS bits on descriptors to indicate that a
particular descriptor is the last one and needs to generate an irq when
it was sent. These bits should not be checked on completion path
regardless whether it's the Tx or the Rx. DD bit serves this purpose and
it indicates that a particular descriptor is either for Rx or was
successfully Txed. EOF is also set as loopback test does not xmit
fragmented frames.
Look at (DD | EOF) bits setting in ice_lbtest_receive_frames() instead
of EOP and RS pair.
Fixes: 0e674aeb0b77 ("ice: Add handler for ethtool selftest")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The driver currently does not allow two VSIs in the same PF domain
to have the same unicast MAC address. This is incorrect in the sense
that a policy decision is being made in the driver when it must be
left to the user. This approach was causing issues when rebooting
the system with VFs spawned not being able to change their MAC addresses.
Such errors were present in dmesg:
[ 7921.068237] ice 0000:b6:00.2 ens2f2: Unicast MAC 6a:0d:e4:70:ca:d1 already
exists on this PF. Preventing setting VF 7 unicast MAC address to 6a:0d:e4:70:ca:d1
Fix that by removing this restriction. Doing this also allows
us to remove some additional code that's checking if a unicast MAC
filter already exists.
Fixes: 47ebc7b02485 ("ice: Check if unicast MAC exists before setting VF MAC")
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Fix checksum offload on VXLAN tunnels.
In case, when mpls protocol is not used, set l4 header to transport
header of skb. This fixes case, when user tries to offload checksums
of VXLAN tunneled traffic.
Steps for reproduction (requires link partner with tunnels):
ip l s enp130s0f0 up
ip a f enp130s0f0
ip a a 10.10.110.2/24 dev enp130s0f0
ip l s enp130s0f0 mtu 1600
ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev enp130s0f0 dstport 4789
ip l s vxlan12_sut up
ip a a 20.10.110.2/24 dev vxlan12_sut
iperf3 -c 20.10.110.1 #should connect
Offload params: td_offset, cd_tunnel_params were
corrupted, due to l4 header pointing wrong address. NIC would then drop
those packets internally, due to incorrect TX descriptor data,
which increased GLV_TEPC register.
Fixes: 69e66c04c672 ("ice: Add mpls+tso support")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Legacy VLAN implementation allows for untrusted VF to have 8 VLAN
filters, not counting VLAN 0 filters. Current VLAN_V2 implementation
lowers available filters for VF, by counting in VLAN 0 filter for both
TPIDs.
Fix this by counting only non zero VLAN filters.
Without this patch, untrusted VF would not be able to access 8 VLAN
filters.
Fixes: cc71de8fa133 ("ice: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
A NULL pointer dereference was reported by Wei Chen:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:__list_del_entry_valid+0x26/0x80
Call Trace:
<TASK>
sctp_sched_dequeue_common+0x1c/0x90
sctp_sched_prio_dequeue+0x67/0x80
__sctp_outq_teardown+0x299/0x380
sctp_outq_free+0x15/0x20
sctp_association_free+0xc3/0x440
sctp_do_sm+0x1ca7/0x2210
sctp_assoc_bh_rcv+0x1f6/0x340
This happens when calling sctp_sendmsg without connecting to server first.
In this case, a data chunk already queues up in send queue of client side
when processing the INIT_ACK from server in sctp_process_init() where it
calls sctp_stream_init() to alloc stream_in. If it fails to alloc stream_in
all stream_out will be freed in sctp_stream_init's err path. Then in the
asoc freeing it will crash when dequeuing this data chunk as stream_out
is missing.
As we can't free stream out before dequeuing all data from send queue, and
this patch is to fix it by moving the err path stream_out/in freeing in
sctp_stream_init() to sctp_stream_free() which is eventually called when
freeing the asoc in sctp_association_free(). This fix also makes the code
in sctp_process_init() more clear.
Note that in sctp_association_init() when it fails in sctp_stream_init(),
sctp_association_free() will not be called, and in that case it should
go to 'stream_free' err path to free stream instead of 'fail_init'.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/831a3dc100c4908ff76e5bcc363be97f2778bc0b.1658787066.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Sending a PTP packet can imply to use the normal TX driver datapath but
invoked from the driver's ptp worker. The kernel generic TX code
disables softirqs and preemption before calling specific driver TX code,
but the ptp worker does not. Although current ptp driver functionality
does not require it, there are several reasons for doing so:
1) The invoked code is always executed with softirqs disabled for non
PTP packets.
2) Better if a ptp packet transmission is not interrupted by softirq
handling which could lead to high latencies.
3) netdev_xmit_more used by the TX code requires preemption to be
disabled.
Indeed a solution for dealing with kernel preemption state based on static
kernel configuration is not possible since the introduction of dynamic
preemption level configuration at boot time using the static calls
functionality.
Fixes: f79c957a0b537 ("drivers: net: sfc: use netdev_xmit_more helper")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Link: https://lore.kernel.org/r/20220726064504.49613-1-alejandro.lucero-palau@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The crc16() function is used to check the firmware validity, but
the library was not explicitly selected.
Fixes: 3c3673bde50c ("ptp: ocp: Add firmware header checks")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Vadim Fedorenko <vadfed@fb.com>
Link: https://lore.kernel.org/r/20220726220604.1339972-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
After the blamed commit, IPv4 SYN packets handled
by a dual stack IPv6 socket are dropped, even if
perfectly valid.
$ nstat | grep MD5
TcpExtTCPMD5Failure 5 0.0
For a dual stack listener, an incoming IPv4 SYN packet
would call tcp_inbound_md5_hash() with @family == AF_INET,
while tp->af_specific is pointing to tcp_sock_ipv6_specific.
Only later when an IPv4-mapped child is created, tp->af_specific
is changed to tcp_sock_ipv6_mapped_specific.
Fixes: 7bbb765b7349 ("net/tcp: Merge TCP-MD5 inbound callbacks")
Reported-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Tested-by: Leonard Crestez <cdleonard@gmail.com>
Link: https://lore.kernel.org/r/20220726115743.2759832-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
We try using cancel_delayed_work_sync() to prevent the work from
enabling NAPI. This is insufficient since we don't disable the source
of the refill work scheduling. This means an NAPI poll callback after
cancel_delayed_work_sync() can schedule the refill work then can
re-enable the NAPI that leads to use-after-free [1].
Since the work can enable NAPI, we can't simply disable NAPI before
calling cancel_delayed_work_sync(). So fix this by introducing a
dedicated boolean to control whether or not the work could be
scheduled from NAPI.
[1]
==================================================================
BUG: KASAN: use-after-free in refill_work+0x43/0xd4
Read of size 2 at addr ffff88810562c92e by task kworker/2:1/42
CPU: 2 PID: 42 Comm: kworker/2:1 Not tainted 5.19.0-rc1+ #480
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: events refill_work
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0xbb/0x6ac
? _printk+0xad/0xde
? refill_work+0x43/0xd4
kasan_report+0xa8/0x130
? refill_work+0x43/0xd4
refill_work+0x43/0xd4
process_one_work+0x43d/0x780
worker_thread+0x2a0/0x6f0
? process_one_work+0x780/0x780
kthread+0x167/0x1a0
? kthread_exit+0x50/0x50
ret_from_fork+0x22/0x30
</TASK>
...
Fixes: b2baed69e605c ("virtio_net: set/cancel work on ndo_open/ndo_stop")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
New subflows are created within the kernel using O_NONBLOCK, so
EINPROGRESS is the expected return value from kernel_connect().
__mptcp_subflow_connect() has the correct logic to consider EINPROGRESS
to be a successful case, but it has also used that error code as its
return value.
Before v5.19 this was benign: all the callers ignored the return
value. Starting in v5.19 there is a MPTCP_PM_CMD_SUBFLOW_CREATE generic
netlink command that does use the return value, so the EINPROGRESS gets
propagated to userspace.
Make __mptcp_subflow_connect() always return 0 on success instead.
Fixes: ec3edaa7ca6c ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: 702c2f646d42 ("mptcp: netlink: allow userspace-driven subflow establishment")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220725205231.87529-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |\ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Florian Westphal says:
====================
netfilter updates for net
Three late fixes for netfilter:
1) If nf_queue user requests packet truncation below size of l3 header,
we corrupt the skb, then crash. Reject such requests.
2) add cond_resched() calls when doing cycle detection in the
nf_tables graph. This avoids softlockup warning with certain
rulesets.
3) Reject rulesets that use nftables 'queue' expression in family/chain
combinations other than those that are supported. Currently the ruleset
will load, but when userspace attempts to reinject you get WARN splat +
packet drops.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_queue: only allow supported familes and hooks
netfilter: nf_tables: add rescheduling points during loop detection walks
netfilter: nf_queue: do not allow packet truncation below transport header offset
====================
Link: https://lore.kernel.org/r/20220726192056.13497-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Trying to use 'queue' statement in ingress (for example)
triggers a splat on reinject:
WARNING: CPU: 3 PID: 1345 at net/netfilter/nf_queue.c:291
... because nf_reinject cannot find the ruleset head.
The netdev family doesn't support async resume at the moment anyway,
so disallow loading such rulesets with a more appropriate
error message.
v2: add 'validate' callback and also check hook points, v1 did
allow ingress use in 'table inet', but that doesn't work either. (Pablo)
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Add explicit rescheduling points during ruleset walk.
Switching to a faster algorithm is possible but this is a much
smaller change, suitable for nf tree.
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1460
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
| | | | |/
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
offset
Domingo Dirutigliano and Nicola Guerrera report kernel panic when
sending nf_queue verdict with 1-byte nfta_payload attribute.
The IP/IPv6 stack pulls the IP(v6) header from the packet after the
input hook.
If user truncates the packet below the header size, this skb_pull() will
result in a malformed skb (skb->len < 0).
Fixes: 7af4cc3fa158 ("[NETFILTER]: Add "nfnetlink_queue" netfilter queue handler over nfnetlink")
Reported-by: Domingo Dirutigliano <pwnzer0tt1@proton.me>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
| | | |\ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix early wakeup after suspend
- Fix double free on error
- Fix use-after-free on l2cap_chan_put
* tag 'for-net-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
Bluetooth: Always set event mask on suspend
Bluetooth: mgmt: Fix double free on error path
====================
Link: https://lore.kernel.org/r/20220726221328.423714-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
This fixes the following trace which is caused by hci_rx_work starting up
*after* the final channel reference has been put() during sock_close() but
*before* the references to the channel have been destroyed, so instead
the code now rely on kref_get_unless_zero/l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.
refcount_t: increment on 0; use-after-free.
BUG: KASAN: use-after-free in refcount_dec_and_test+0x20/0xd0
Read of size 4 at addr ffffffc114f5bf18 by task kworker/u17:14/705
CPU: 4 PID: 705 Comm: kworker/u17:14 Tainted: G S W
4.14.234-00003-g1fb6d0bd49a4-dirty #28
Hardware name: Qualcomm Technologies, Inc. SM8150 V2 PM8150
Google Inc. MSM sm8150 Flame DVT (DT)
Workqueue: hci0 hci_rx_work
Call trace:
dump_backtrace+0x0/0x378
show_stack+0x20/0x2c
dump_stack+0x124/0x148
print_address_description+0x80/0x2e8
__kasan_report+0x168/0x188
kasan_report+0x10/0x18
__asan_load4+0x84/0x8c
refcount_dec_and_test+0x20/0xd0
l2cap_chan_put+0x48/0x12c
l2cap_recv_frame+0x4770/0x6550
l2cap_recv_acldata+0x44c/0x7a4
hci_acldata_packet+0x100/0x188
hci_rx_work+0x178/0x23c
process_one_work+0x35c/0x95c
worker_thread+0x4cc/0x960
kthread+0x1a8/0x1c4
ret_from_fork+0x10/0x18
Cc: stable@kernel.org
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
When suspending, always set the event mask once disconnects are
successful. Otherwise, if wakeup is disallowed, the event mask is not
set before suspend continues and can result in an early wakeup.
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Cc: stable@vger.kernel.org
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
| | | | |/
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Don't call mgmt_pending_remove() twice (double free).
Fixes: 6b88eff43704 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
lockdep complains use of uninitialized spinlock at ieee80211_do_stop() [1],
for commit f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif
that is being stopped") guards clear_bit() using fq.lock even before
fq_init() from ieee80211_txq_setup_flows() initializes this spinlock.
According to discussion [2], Toke was not happy with expanding usage of
fq.lock. Since __ieee80211_wake_txqs() is called under RCU read lock, we
can instead use synchronize_rcu() for flushing ieee80211_wake_txqs().
Link: https://syzkaller.appspot.com/bug?extid=eceab52db7c4b961e9d6 [1]
Link: https://lkml.kernel.org/r/874k0zowh2.fsf@toke.dk [2]
Reported-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: f856373e2f31ffd3 ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Tested-by: syzbot <syzbot+eceab52db7c4b961e9d6@syzkaller.appspotmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/9cc9b81d-75a3-3925-b612-9d0ad3cab82b@I-love.SAKURA.ne.jp
[ pick up commit 3598cb6e1862 ("wifi: mac80211: do not abuse fq.lock in ieee80211_do_stop()") from -next]
Link: https://lore.kernel.org/all/87o7xcq6qt.fsf@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
After commit b6c02ef54913 ("bridge: Netlink interface fix."),
br_fill_ifinfo() started to send an empty IFLA_AF_SPEC attribute when a
bridge vlan dump is requested but an interface does not have any vlans
configured.
iproute2 ignores such an empty attribute since commit b262a9becbcb
("bridge: Fix output with empty vlan lists") but older iproute2 versions as
well as other utilities have their output changed by the cited kernel
commit, resulting in failed test cases. Regardless, emitting an empty
attribute is pointless and inefficient.
Avoid this change by canceling the attribute if no AF_SPEC data was added.
Fixes: b6c02ef54913 ("bridge: Netlink interface fix.")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220725001236.95062-1-bpoirier@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | |\
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Subbaraya Sundeep says:
====================
Octeontx2 minor tc fixes
This patch set fixes two problems found in tc code
wrt to ratelimiting and when installing UDP/TCP filters.
Patch 1: CN10K has different register format compared to
CN9xx hence fixes that.
Patch 2: Check flow mask also before installing a src/dst
port filter, otherwise installing for one port installs for other one too.
====================
Link: https://lore.kernel.org/r/1658650874-16459-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Check the mask for non-zero value before installing tc filters
for L4 source and destination ports. Otherwise installing a
filter for source port installs destination port too and
vice-versa.
Fixes: 1d4d9e42c240 ("octeontx2-pf: Add tc flower hardware offload on ingress traffic")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | |/
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
NIX_AF_TLXX_PIR/CIR register format has changed from OcteonTx2
to CN10K. CN10K supports larger burst size. Fix burst exponent
and burst mantissa configuration for CN10K.
Also fixed 'maxrate' from u32 to u64 since 'police.rate_bytes_ps'
passed by stack is also u64.
Fixes: e638a83f167e ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There are sleep in atomic context bugs in timer handlers of sctp
such as sctp_generate_t3_rtx_event(), sctp_generate_probe_event(),
sctp_generate_t1_init_event(), sctp_generate_timeout_event(),
sctp_generate_t3_rtx_event() and so on.
The root cause is sctp_sched_prio_init_sid() with GFP_KERNEL parameter
that may sleep could be called by different timer handlers which is in
interrupt context.
One of the call paths that could trigger bug is shown below:
(interrupt context)
sctp_generate_probe_event
sctp_do_sm
sctp_side_effects
sctp_cmd_interpreter
sctp_outq_teardown
sctp_outq_init
sctp_sched_set_sched
n->init_sid(..,GFP_KERNEL)
sctp_sched_prio_init_sid //may sleep
This patch changes gfp_t parameter of init_sid in sctp_sched_set_sched()
from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic
context bugs.
Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/20220723015809.11553-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Due to an invalid conflict resolution on my side while working on 2
different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add()
does not store the database associated with a dsa_mac_addr structure.
So after adding an FDB entry associated with a LAG, dsa_mac_addr_find()
fails to find it while deleting it, because &a->db is zeroized memory
for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del()
returns -ENOENT rather than deleting the entry.
Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Fix the inability to bring an interface up on a setup with
only MSI interrupts enabled (no MSI-X).
Solution is to add a default number of QPs = 1. This is enough,
since without MSI-X support driver enables only a basic feature set.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | |\
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Kuniyuki Iwashima says:
====================
sysctl: Fix data-races around ipv4_net_table (Round 6, Final).
This series fixes data-races around 11 knobs after tcp_pacing_ss_ratio
ipv4_net_table, and this is the final round for ipv4_net_table.
While at it, other data-races around these related knobs are fixed.
- decnet_mem
- decnet_rmem
- tipc_rmem
There are still 58 tables possibly missing some fixes under net/.
$ grep -rnE "struct ctl_table.*?\[\] =" net/ | wc -l
60
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
While reading sysctl_fib_notify_on_flag_change, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
