summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* genirq/irqdomain: Remove the param count restriction from select()Thomas Gleixner2024-02-151-1/+1
| | | | | | | | | | | | | | Now that the GIC-v3 callback can handle invocation with a fwspec parameter count of 0 lift the restriction in the core code and invoke select() unconditionally when the domain provides it. Preparatory change for per device MSI domains. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240127161753.114685-3-apatel@ventanamicro.com
* irqchip/gic-v3: Make gic_irq_domain_select() robust for zero parameter countThomas Gleixner2024-02-151-1/+5
| | | | | | | | | | | | | | | | | | | | Currently the irqdomain select callback is only invoked when the parameter count of the fwspec arguments is not zero. That makes sense because then the match is on the firmware node and eventually on the bus_token, which is already handled in the core code. The upcoming support for per device MSI domains requires to do real bus token specific checks in the MSI parent domains with a zero parameter count. Make the gic-v3 select() callback handle that case. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anup Patel <apatel@ventanamicro.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240127161753.114685-2-apatel@ventanamicro.com
* Linux 6.8-rc4v6.8-rc4Linus Torvalds2024-02-111-1/+1
|
* Merge tag 'timers_urgent_for_v6.8_rc4' of ↵Linus Torvalds2024-02-112-1/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Borislav Petkov: - Make sure a warning is issued when a hrtimer gets queued after the timers have been migrated on the CPU down path and thus said timer will get ignored * tag 'timers_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Report offline hrtimer enqueue
| * hrtimer: Report offline hrtimer enqueueFrederic Weisbecker2024-02-062-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hrtimers migration on CPU-down hotplug process has been moved earlier, before the CPU actually goes to die. This leaves a small window of opportunity to queue an hrtimer in a blind spot, leaving it ignored. For example a practical case has been reported with RCU waking up a SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that way a sched/rt timer to the local offline CPU. Make sure such situations never go unnoticed and warn when that happens. Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Reported-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
* | Merge tag 'x86_urgent_for_v6.8_rc4' of ↵Linus Torvalds2024-02-114-31/+28
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Correct the minimum CPU family for Transmeta Crusoe in Kconfig so that such hw can boot again - Do not take into accout XSTATE buffer size info supplied by userspace when constructing a sigreturn frame - Switch get_/put_user* to EX_TYPE_UACCESS exception handling when an MCE is encountered so that it can be properly recovered from instead of simply panicking * tag 'x86_urgent_for_v6.8_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6 x86/fpu: Stop relying on userspace for info to fault in xsave buffer x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixups
| * | x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6Aleksander Mazur2024-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows the following error message: This kernel requires an i686 CPU, but only detected an i586 CPU. Unable to boot - please use a kernel appropriate for your CPU. Remove MCRUSOE from the condition introduced in commit in Fixes, effectively changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the CPU family given by CPUID. [ bp: Massage commit message. ] Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig") Signed-off-by: Aleksander Mazur <deweloper@wp.pl> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl
| * | x86/fpu: Stop relying on userspace for info to fault in xsave bufferAndrei Vagin2024-01-301-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this change, the expected size of the user space buffer was taken from fx_sw->xstate_size. fx_sw->xstate_size can be changed from user-space, so it is possible construct a sigreturn frame where: * fx_sw->xstate_size is smaller than the size required by valid bits in fx_sw->xfeatures. * user-space unmaps parts of the sigrame fpu buffer so that not all of the buffer required by xrstor is accessible. In this case, xrstor tries to restore and accesses the unmapped area which results in a fault. But fault_in_readable succeeds because buf + fx_sw->xstate_size is within the still mapped area, so it goes back and tries xrstor again. It will spin in this loop forever. Instead, fault in the maximum size which can be touched by XRSTOR (taken from fpstate->user_size). [ dhansen: tweak subject / changelog ] Fixes: fcb3635f5018 ("x86/fpu/signal: Handle #PF in the direct restore path") Reported-by: Konstantin Bogomolov <bogomolov@google.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrei Vagin <avagin@google.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc:stable@vger.kernel.org Link: https://lore.kernel.org/all/20240130063603.3392627-1-avagin%40google.com
| * | x86/lib: Revert to _ASM_EXTABLE_UA() for {get,put}_user() fixupsQiuxu Zhuo2024-01-292-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During memory error injection test on kernels >= v6.4, the kernel panics like below. However, this issue couldn't be reproduced on kernels <= v6.3. mce: [Hardware Error]: CPU 296: Machine Check Exception: f Bank 1: bd80000000100134 mce: [Hardware Error]: RIP 10:<ffffffff821b9776> {__get_user_nocheck_4+0x6/0x20} mce: [Hardware Error]: TSC 411a93533ed ADDR 346a8730040 MISC 86 mce: [Hardware Error]: PROCESSOR 0:a06d0 TIME 1706000767 SOCKET 1 APIC 211 microcode 80001490 mce: [Hardware Error]: Run the above through 'mcelog --ascii' mce: [Hardware Error]: Machine check: Data load in unrecoverable area of kernel Kernel panic - not syncing: Fatal local machine check The MCA code can recover from an in-kernel #MC if the fixup type is EX_TYPE_UACCESS, explicitly indicating that the kernel is attempting to access userspace memory. However, if the fixup type is EX_TYPE_DEFAULT the only thing that is raised for an in-kernel #MC is a panic. ex_handler_uaccess() would warn if users gave a non-canonical addresses (with bit 63 clear) to {get, put}_user(), which was unexpected. Therefore, commit b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") replaced _ASM_EXTABLE_UA() with _ASM_EXTABLE() for {get, put}_user() fixups. However, the new fixup type EX_TYPE_DEFAULT results in a panic. Commit 6014bc27561f ("x86-64: make access_ok() independent of LAM") added the check gp_fault_address_ok() right before the WARN_ONCE() in ex_handler_uaccess() to not warn about non-canonical user addresses due to LAM. With that in place, revert back to _ASM_EXTABLE_UA() for {get,put}_user() exception fixups in order to be able to handle in-kernel MCEs correctly again. [ bp: Massage commit message. ] Fixes: b19b74bc99b1 ("x86/mm: Rework address range check in get_user() and put_user()") Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240129063842.61584-1-qiuxu.zhuo@intel.com
* | | Merge tag 'mm-hotfixes-stable-2024-02-10-11-16' of ↵Linus Torvalds2024-02-1117-101/+162
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "21 hotfixes. 12 are cc:stable and the remainder pertain to post-6.7 issues or aren't considered to be needed in earlier kernel versions" * tag 'mm-hotfixes-stable-2024-02-10-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits) nilfs2: fix potential bug in end_buffer_async_write mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setup nilfs2: fix hang in nilfs_lookup_dirty_data_buffers() MAINTAINERS: Leo Yan has moved mm/zswap: don't return LRU_SKIP if we have dropped lru lock fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_super mailmap: switch email address for John Moon mm: zswap: fix objcg use-after-free in entry destruction mm/madvise: don't forget to leave lazy MMU mode in madvise_cold_or_pageout_pte_range() arch/arm/mm: fix major fault accounting when retrying under per-VMA lock selftests: core: include linux/close_range.h for CLOSE_RANGE_* macros mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_page mm: memcg: optimize parent iteration in memcg_rstat_updated() nilfs2: fix data corruption in dsync block recovery for small block sizes mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get() exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock) fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children stats fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of lock_task_sighand() getrusage: use sig->stats_lock rather than lock_task_sighand() getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand() ...
| * | | nilfs2: fix potential bug in end_buffer_async_writeRyusuke Konishi2024-02-081-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer. Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm/damon/sysfs-schemes: fix wrong DAMOS tried regions update timeout setupSeongJae Park2024-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DAMON sysfs interface's update_schemes_tried_regions command has a timeout of two apply intervals of the DAMOS scheme. Having zero value DAMOS scheme apply interval means it will use the aggregation interval as the value. However, the timeout setup logic is mistakenly using the sampling interval insted of the aggregartion interval for the case. This could cause earlier-than-expected timeout of the command. Fix it. Link: https://lkml.kernel.org/r/20240202191956.88791-1-sj@kernel.org Fixes: 7d6fa31a2fd7 ("mm/damon/sysfs-schemes: add timeout for update_schemes_tried_regions") Signed-off-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> # 6.7.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()Ryusuke Konishi2024-02-081-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device. Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | MAINTAINERS: Leo Yan has movedLeo Yan2024-02-082-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I will lose access to my @linaro.org email address next week, update the MAINTAINERS file and map it in .mailmap with the new email address. Link: https://lkml.kernel.org/r/20240201021022.886-1-leo.yan@linux.dev Signed-off-by: Leo Yan <leo.yan@linux.dev> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm/zswap: don't return LRU_SKIP if we have dropped lru lockChengming Zhou2024-02-081-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LRU_SKIP can only be returned if we don't ever dropped lru lock, or we need to return LRU_RETRY to restart from the head of lru list. Otherwise, the iteration might continue from a cursor position that was freed while the locks were dropped. Actually we may need to introduce another LRU_STOP to really terminate the ongoing shrinking scan process, when we encounter a warm page already in the swap cache. The current list_lru implementation doesn't have this function to early break from __list_lru_walk_one. Link: https://lkml.kernel.org/r/20240126-zswap-writeback-race-v2-1-b10479847099@bytedance.com Fixes: b5ba474f3f51 ("zswap: shrink zswap pool based on memory pressure") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Cc: Chris Li <chriscli@google.com> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | fs,hugetlb: fix NULL pointer dereference in hugetlbs_fill_superOscar Salvador2024-02-081-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When configuring a hugetlb filesystem via the fsconfig() syscall, there is a possible NULL dereference in hugetlbfs_fill_super() caused by assigning NULL to ctx->hstate in hugetlbfs_parse_param() when the requested pagesize is non valid. E.g: Taking the following steps: fd = fsopen("hugetlbfs", FSOPEN_CLOEXEC); fsconfig(fd, FSCONFIG_SET_STRING, "pagesize", "1024", 0); fsconfig(fd, FSCONFIG_CMD_CREATE, NULL, NULL, 0); Given that the requested "pagesize" is invalid, ctxt->hstate will be replaced with NULL, losing its previous value, and we will print an error: ... ... case Opt_pagesize: ps = memparse(param->string, &rest); ctx->hstate = h; if (!ctx->hstate) { pr_err("Unsupported page size %lu MB\n", ps / SZ_1M); return -EINVAL; } return 0; ... ... This is a problem because later on, we will dereference ctxt->hstate in hugetlbfs_fill_super() ... ... sb->s_blocksize = huge_page_size(ctx->hstate); ... ... Causing below Oops. Fix this by replacing cxt->hstate value only when then pagesize is known to be valid. kernel: hugetlbfs: Unsupported page size 0 MB kernel: BUG: kernel NULL pointer dereference, address: 0000000000000028 kernel: #PF: supervisor read access in kernel mode kernel: #PF: error_code(0x0000) - not-present page kernel: PGD 800000010f66c067 P4D 800000010f66c067 PUD 1b22f8067 PMD 0 kernel: Oops: 0000 [#1] PREEMPT SMP PTI kernel: CPU: 4 PID: 5659 Comm: syscall Tainted: G E 6.8.0-rc2-default+ #22 5a47c3fef76212addcc6eb71344aabc35190ae8f kernel: Hardware name: Intel Corp. GROVEPORT/GROVEPORT, BIOS GVPRCRB1.86B.0016.D04.1705030402 05/03/2017 kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 kernel: Call Trace: kernel: <TASK> kernel: ? __die_body+0x1a/0x60 kernel: ? page_fault_oops+0x16f/0x4a0 kernel: ? search_bpf_extables+0x65/0x70 kernel: ? fixup_exception+0x22/0x310 kernel: ? exc_page_fault+0x69/0x150 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: ? hugetlbfs_fill_super+0xb4/0x1a0 kernel: ? hugetlbfs_fill_super+0x28/0x1a0 kernel: ? __pfx_hugetlbfs_fill_super+0x10/0x10 kernel: vfs_get_super+0x40/0xa0 kernel: ? __pfx_bpf_lsm_capable+0x10/0x10 kernel: vfs_get_tree+0x25/0xd0 kernel: vfs_cmd_create+0x64/0xe0 kernel: __x64_sys_fsconfig+0x395/0x410 kernel: do_syscall_64+0x80/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? syscall_exit_to_user_mode+0x82/0x240 kernel: ? do_syscall_64+0x8d/0x160 kernel: ? exc_page_fault+0x69/0x150 kernel: entry_SYSCALL_64_after_hwframe+0x6e/0x76 kernel: RIP: 0033:0x7ffbc0cb87c9 kernel: Code: 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 97 96 0d 00 f7 d8 64 89 01 48 kernel: RSP: 002b:00007ffc29d2f388 EFLAGS: 00000206 ORIG_RAX: 00000000000001af kernel: RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffbc0cb87c9 kernel: RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000003 kernel: RBP: 00007ffc29d2f3b0 R08: 0000000000000000 R09: 0000000000000000 kernel: R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000000 kernel: R13: 00007ffc29d2f4c0 R14: 0000000000000000 R15: 0000000000000000 kernel: </TASK> kernel: Modules linked in: rpcsec_gss_krb5(E) auth_rpcgss(E) nfsv4(E) dns_resolver(E) nfs(E) lockd(E) grace(E) sunrpc(E) netfs(E) af_packet(E) bridge(E) stp(E) llc(E) iscsi_ibft(E) iscsi_boot_sysfs(E) intel_rapl_msr(E) intel_rapl_common(E) iTCO_wdt(E) intel_pmc_bxt(E) sb_edac(E) iTCO_vendor_support(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) coretemp(E) kvm_intel(E) rfkill(E) ipmi_ssif(E) kvm(E) acpi_ipmi(E) irqbypass(E) pcspkr(E) igb(E) ipmi_si(E) mei_me(E) i2c_i801(E) joydev(E) intel_pch_thermal(E) i2c_smbus(E) dca(E) lpc_ich(E) mei(E) ipmi_devintf(E) ipmi_msghandler(E) acpi_pad(E) tiny_power_button(E) button(E) fuse(E) efi_pstore(E) configfs(E) ip_tables(E) x_tables(E) ext4(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) sd_mod(E) t10_pi(E) crct10dif_pclmul(E) crc32_pclmul(E) crc32c_intel(E) polyval_clmulni(E) ahci(E) xhci_pci(E) polyval_generic(E) gf128mul(E) ghash_clmulni_intel(E) sha512_ssse3(E) sha256_ssse3(E) xhci_pci_renesas(E) libahci(E) ehci_pci(E) sha1_ssse3(E) xhci_hcd(E) ehci_hcd(E) libata(E) kernel: mgag200(E) i2c_algo_bit(E) usbcore(E) wmi(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) scsi_common(E) aesni_intel(E) crypto_simd(E) cryptd(E) kernel: Unloaded tainted modules: acpi_cpufreq(E):1 fjes(E):1 kernel: CR2: 0000000000000028 kernel: ---[ end trace 0000000000000000 ]--- kernel: RIP: 0010:hugetlbfs_fill_super+0xb4/0x1a0 kernel: Code: 48 8b 3b e8 3e c6 ed ff 48 85 c0 48 89 45 20 0f 84 d6 00 00 00 48 b8 ff ff ff ff ff ff ff 7f 4c 89 e7 49 89 44 24 20 48 8b 03 <8b> 48 28 b8 00 10 00 00 48 d3 e0 49 89 44 24 18 48 8b 03 8b 40 28 kernel: RSP: 0018:ffffbe9960fcbd48 EFLAGS: 00010246 kernel: RAX: 0000000000000000 RBX: ffff9af5272ae780 RCX: 0000000000372004 kernel: RDX: ffffffffffffffff RSI: ffffffffffffffff RDI: ffff9af555e9b000 kernel: RBP: ffff9af52ee66b00 R08: 0000000000000040 R09: 0000000000370004 kernel: R10: ffffbe9960fcbd48 R11: 0000000000000040 R12: ffff9af555e9b000 kernel: R13: ffffffffa66b86c0 R14: ffff9af507d2f400 R15: ffff9af507d2f400 kernel: FS: 00007ffbc0ba4740(0000) GS:ffff9b0bd7000000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000000028 CR3: 00000001b1ee0000 CR4: 00000000001506f0 Link: https://lkml.kernel.org/r/20240130210418.3771-1-osalvador@suse.de Fixes: 32021982a324 ("hugetlbfs: Convert to fs_context") Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mailmap: switch email address for John MoonJohn Moon2024-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add current email address as QUIC email is no longer active. Link: https://lkml.kernel.org/r/20240131034311.46706-1-john@jmoon.dev Signed-off-by: John Moon <john@jmoon.dev> Acked-by: Trilok Soni <quic_tsoni@quicinc.com> Cc: Elliot Berman <quic_eberman@quicinc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm: zswap: fix objcg use-after-free in entry destructionJohannes Weiner2024-02-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the per-memcg LRU universe, LRU removal uses entry->objcg to determine which list count needs to be decreased. Drop the objcg reference after updating the LRU, to fix a possible use-after-free. Link: https://lkml.kernel.org/r/20240130013438.565167-1-hannes@cmpxchg.org Fixes: a65b0e7607cc ("zswap: make shrinking memcg-aware") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Yosry Ahmed <yosryahmed@google.com> Reviewed-by: Nhat Pham <nphamcs@gmail.com> Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm/madvise: don't forget to leave lazy MMU mode in ↵Sergey Senozhatsky2024-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | madvise_cold_or_pageout_pte_range() We need to leave lazy MMU mode before unlocking. Link: https://lkml.kernel.org/r/20240126032608.355899-1-senozhatsky@chromium.org Fixes: b2f557a21bc8 ("mm/madvise: add cond_resched() in madvise_cold_or_pageout_pte_range()") Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jiexun Wang <wangjiexun@tinylab.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | arch/arm/mm: fix major fault accounting when retrying under per-VMA lockSuren Baghdasaryan2024-02-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change [1] missed ARM architecture when fixing major fault accounting for page fault retry under per-VMA lock. The user-visible effects is that it restores correct major fault accounting that was broken after [2] was merged in 6.7 kernel. The more detailed description is in [3] and this patch simply adds the same fix to ARM architecture which I missed in [3]. Add missing code to fix ARM architecture fault accounting. [1] 46e714c729c8 ("arch/mm/fault: fix major fault accounting when retrying under per-VMA lock") [2] https://lore.kernel.org/all/20231006195318.4087158-6-willy@infradead.org/ [3] https://lore.kernel.org/all/20231226214610.109282-1-surenb@google.com/ Link: https://lkml.kernel.org/r/20240123064305.2829244-1-surenb@google.com Fixes: 12214eba1992 ("mm: handle read faults under the VMA lock") Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | selftests: core: include linux/close_range.h for CLOSE_RANGE_* macrosMuhammad Usama Anjum2024-02-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correct header file is needed for getting CLOSE_RANGE_* macros. Previously it was tested with newer glibc which didn't show the need to include the header which was a mistake. Link: https://lkml.kernel.org/r/20231024155137.219700-1-usama.anjum@collabora.com Fixes: ec54424923cf ("selftests: core: remove duplicate defines") Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Link: https://lore.kernel.org/all/7161219e-0223-d699-d6f3-81abd9abf13b@arm.com Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm/memory-failure: fix crash in split_huge_page_to_list from soft_offline_pageMiaohe Lin2024-02-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I did soft offline stress test, a machine was observed to crash with the following message: kernel BUG at include/linux/memcontrol.h:554! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 3837 Comm: hwpoison.sh Not tainted 6.7.0-next-20240112-00001-g8ecf3e7fb7c8-dirty #97 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:folio_memcg+0xaf/0xd0 Code: 10 5b 5d c3 cc cc cc cc 48 c7 c6 08 b1 f2 b2 48 89 ef e8 b4 c5 f8 ff 90 0f 0b 48 c7 c6 d0 b0 f2 b2 48 89 ef e8 a2 c5 f8 ff 90 <0f> 0b 48 c7 c6 08 b1 f2 b2 48 89 ef e8 90 c5 f8 ff 90 0f 0b 66 66 RSP: 0018:ffffb6c043657c98 EFLAGS: 00000296 RAX: 000000000000004b RBX: ffff932bc1d1e401 RCX: ffff933abfb5c908 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff933abfb5c900 RBP: ffffea6f04019080 R08: ffffffffb3338ce8 R09: 0000000000009ffb R10: 00000000000004dd R11: ffffffffb3308d00 R12: ffffea6f04019080 R13: ffffea6f04019080 R14: 0000000000000001 R15: ffffb6c043657da0 FS: 00007f6c60f6b740(0000) GS:ffff933abfb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559c3bc8b980 CR3: 0000000107f1c000 CR4: 00000000000006f0 Call Trace: <TASK> split_huge_page_to_list+0x4d/0x1380 try_to_split_thp_page+0x3a/0xf0 soft_offline_page+0x1ea/0x8a0 soft_offline_page_store+0x52/0x90 kernfs_fop_write_iter+0x118/0x1b0 vfs_write+0x30b/0x430 ksys_write+0x5e/0xe0 do_syscall_64+0xb0/0x1b0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f6c60d14697 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffe9b72b8d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f6c60d14697 RDX: 000000000000000c RSI: 0000559c3bc8b980 RDI: 0000000000000001 RBP: 0000559c3bc8b980 R08: 00007f6c60dd1460 R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c R13: 00007f6c60e1a780 R14: 00007f6c60e16600 R15: 00007f6c60e15a00 The problem is that page->mapping is overloaded with slab->slab_list or slabs fields now, so slab pages could be taken as non-LRU movable pages if field slabs contains PAGE_MAPPING_MOVABLE or slab_list->prev is set to LIST_POISON2. These slab pages will be treated as thp later leading to crash in split_huge_page_to_list(). Link: https://lkml.kernel.org/r/20240126065837.2100184-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20240124084014.1772906-1-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Fixes: 130d4df57390 ("mm/sl[au]b: rearrange struct slab fields to allow larger rcu_head") Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm: memcg: optimize parent iteration in memcg_rstat_updated()Yosry Ahmed2024-02-081-21/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In memcg_rstat_updated(), we iterate the memcg being updated and its parents to update memcg->vmstats_percpu->stats_updates in the fast path (i.e. no atomic updates). According to my math, this is 3 memory loads (and potentially 3 cache misses) per memcg: - Load the address of memcg->vmstats_percpu. - Load vmstats_percpu->stats_updates (based on some percpu calculation). - Load the address of the parent memcg. Avoid most of the cache misses by caching a pointer from each struct memcg_vmstats_percpu to its parent on the corresponding CPU. In this case, for the first memcg we have 2 memory loads (same as above): - Load the address of memcg->vmstats_percpu. - Load vmstats_percpu->stats_updates (based on some percpu calculation). Then for each additional memcg, we need a single load to get the parent's stats_updates directly. This reduces the number of loads from O(3N) to O(2+N) -- where N is the number of memcgs we need to iterate. Additionally, stash a pointer to memcg->vmstats in each struct memcg_vmstats_percpu such that we can access the atomic counter that all CPUs fold into, memcg->vmstats->stats_updates. memcg_should_flush_stats() is changed to memcg_vmstats_needs_flush() to accept a struct memcg_vmstats pointer accordingly. In struct memcg_vmstats_percpu, make sure both pointers together with stats_updates live on the same cacheline. Finally, update mem_cgroup_alloc() to take in a parent pointer and initialize the new cache pointers on each CPU. The percpu loop in mem_cgroup_alloc() may look concerning, but there are multiple similar loops in the cgroup creation path (e.g. cgroup_rstat_init()), most of which are hidden within alloc_percpu(). According to Oliver's testing [1], this fixes multiple 30-38% regressions in vm-scalability, will-it-scale-tlb_flush2, and will-it-scale-fallocate1. This comes at a cost of 2 more pointers per CPU (<2KB on a machine with 128 CPUs). [1] https://lore.kernel.org/lkml/ZbDJsfsZt2ITyo61@xsang-OptiPlex-9020/ [yosryahmed@google.com: fix struct memcg_vmstats_percpu size and alignment] Link: https://lkml.kernel.org/r/20240203044612.1234216-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20240124100023.660032-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Fixes: 8d59d2214c23 ("mm: memcg: make stats flushing threshold per-memcg") Tested-by: kernel test robot <oliver.sang@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401221624.cb53a8ca-oliver.sang@intel.com Acked-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Greg Thelen <gthelen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | nilfs2: fix data corruption in dsync block recovery for small block sizesRyusuke Konishi2024-02-081-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page. Link: https://lkml.kernel.org/r/20240124121936.10575-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm/userfaultfd: UFFDIO_MOVE implementation should use ptep_get()Ryan Roberts2024-02-081-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit c33c794828f2 ("mm: ptep_get() conversion") converted all (non-arch) call sites to use ptep_get() instead of doing a direct dereference of the pte. Full rationale can be found in that commit's log. Since then, UFFDIO_MOVE has been implemented which does 7 direct pte dereferences. Let's fix those up to use ptep_get(). I've asserted in the past that there is no reliable automated mechanism to catch these; I'm relying on a combination of Coccinelle (which throws up a lot of false positives) and some compiler magic to force a compiler error on dereference. But given the frequency with which new issues are coming up, I'll add it to my todo list to try to find an automated solution. Link: https://lkml.kernel.org/r/20240123141755.3836179-1-ryan.roberts@arm.com Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI") Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Suren Baghdasaryan <surenb@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | exit: wait_task_zombie: kill the no longer necessary spin_lock_irq(siglock)Oleg Nesterov2024-02-081-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After the recent changes nobody use siglock to read the values protected by stats_lock, we can kill spin_lock_irq(&current->sighand->siglock) and update the comment. With this patch only __exit_signal() and thread_group_start_cputime() take stats_lock under siglock. Link: https://lkml.kernel.org/r/20240123153359.GA21866@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Dylan Hatch <dylanbhatch@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | fs/proc: do_task_stat: use sig->stats_lock to gather the threads/children statsOleg Nesterov2024-02-081-26/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call do_task_stat() at the same time and the process has NR_THREADS, it will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change do_task_stat() to use sig->stats_lock to gather the statistics outside of ->siglock protected section, in the likely case this code will run lockless. Link: https://lkml.kernel.org/r/20240123153357.GA21857@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Dylan Hatch <dylanbhatch@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | fs/proc: do_task_stat: move thread_group_cputime_adjusted() outside of ↵Oleg Nesterov2024-02-081-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lock_task_sighand() Patch series "fs/proc: do_task_stat: use sig->stats_". do_task_stat() has the same problem as getrusage() had before "getrusage: use sig->stats_lock rather than lock_task_sighand()": a hard lockup. If NR_CPUS threads call lock_task_sighand() at the same time and the process has NR_THREADS, spin_lock_irq will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. This patch (of 3): thread_group_cputime() does its own locking, we can safely shift thread_group_cputime_adjusted() which does another for_each_thread loop outside of ->siglock protected section. Not only this removes for_each_thread() from the critical section with irqs disabled, this removes another case when stats_lock is taken with siglock held. We want to remove this dependency, then we can change the users of stats_lock to not disable irqs. Link: https://lkml.kernel.org/r/20240123153313.GA21832@redhat.com Link: https://lkml.kernel.org/r/20240123153355.GA21854@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Dylan Hatch <dylanbhatch@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | getrusage: use sig->stats_lock rather than lock_task_sighand()Oleg Nesterov2024-02-081-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lock_task_sighand() can trigger a hard lockup. If NR_CPUS threads call getrusage() at the same time and the process has NR_THREADS, spin_lock_irq will spin with irqs disabled O(NR_CPUS * NR_THREADS) time. Change getrusage() to use sig->stats_lock, it was specifically designed for this type of use. This way it runs lockless in the likely case. TODO: - Change do_task_stat() to use sig->stats_lock too, then we can remove spin_lock_irq(siglock) in wait_task_zombie(). - Turn sig->stats_lock into seqcount_rwlock_t, this way the readers in the slow mode won't exclude each other. See https://lore.kernel.org/all/20230913154907.GA26210@redhat.com/ - stats_lock has to disable irqs because ->siglock can be taken in irq context, it would be very nice to change __exit_signal() to avoid the siglock->stats_lock dependency. Link: https://lkml.kernel.org/r/20240122155053.GA26214@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dylan Hatch <dylanbhatch@google.com> Tested-by: Dylan Hatch <dylanbhatch@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | getrusage: move thread_group_cputime_adjusted() outside of lock_task_sighand()Oleg Nesterov2024-02-081-15/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "getrusage: use sig->stats_lock", v2. This patch (of 2): thread_group_cputime() does its own locking, we can safely shift thread_group_cputime_adjusted() which does another for_each_thread loop outside of ->siglock protected section. This is also preparation for the next patch which changes getrusage() to use stats_lock instead of siglock, thread_group_cputime() takes the same lock. With the current implementation recursive read_seqbegin_or_lock() is fine, thread_group_cputime() can't enter the slow mode if the caller holds stats_lock, yet this looks more safe and better performance-wise. Link: https://lkml.kernel.org/r/20240122155023.GA26169@redhat.com Link: https://lkml.kernel.org/r/20240122155050.GA26205@redhat.com Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reported-by: Dylan Hatch <dylanbhatch@google.com> Tested-by: Dylan Hatch <dylanbhatch@google.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | mm: hugetlb pages should not be reserved by shmat() if SHM_NORESERVEPrakash Sangappa2024-02-081-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For shared memory of type SHM_HUGETLB, hugetlb pages are reserved in shmget() call. If SHM_NORESERVE flags is specified then the hugetlb pages are not reserved. However when the shared memory is attached with the shmat() call the hugetlb pages are getting reserved incorrectly for SHM_HUGETLB shared memory created with SHM_NORESERVE which is a bug. ------------------------------- Following test shows the issue. $cat shmhtb.c int main() { int shmflags = 0660 | IPC_CREAT | SHM_HUGETLB | SHM_NORESERVE; int shmid; shmid = shmget(SKEY, SHMSZ, shmflags); if (shmid < 0) { printf("shmat: shmget() failed, %d\n", errno); return 1; } printf("After shmget()\n"); system("cat /proc/meminfo | grep -i hugepages_"); shmat(shmid, NULL, 0); printf("\nAfter shmat()\n"); system("cat /proc/meminfo | grep -i hugepages_"); shmctl(shmid, IPC_RMID, NULL); return 0; } #sysctl -w vm.nr_hugepages=20 #./shmhtb After shmget() HugePages_Total: 20 HugePages_Free: 20 HugePages_Rsvd: 0 HugePages_Surp: 0 After shmat() HugePages_Total: 20 HugePages_Free: 20 HugePages_Rsvd: 5 <-- HugePages_Surp: 0 -------------------------------- Fix is to ensure that hugetlb pages are not reserved for SHM_HUGETLB shared memory in the shmat() call. Link: https://lkml.kernel.org/r/1706040282-12388-1-git-send-email-prakash.sangappa@oracle.com Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com> Acked-by: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
| * | | Merge branch 'master' into mm-hotfixes-stableAndrew Morton2024-02-04426-3352/+5071
| |\ \ \ | | | |/ | | |/|
| * | | Merge branch 'master' into mm-hotfixes-stableAndrew Morton2024-02-02406-1910/+3811
| |\ \ \ | | | |/ | | |/|
* | | | Merge tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linuxLinus Torvalds2024-02-1010-32/+45
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Update a potentially stale firmware attribute (Maurizio) - Fixes for the recent verbose error logging (Keith, Chaitanya) - Protection information payload size fix for passthrough (Francis) - Fix for a queue freezing issue in virtblk (Yi) - blk-iocost underflow fix (Tejun) - blk-wbt task detection fix (Jan) * tag 'block-6.8-2024-02-10' of git://git.kernel.dk/linux: virtio-blk: Ensure no requests in virtqueues before deleting vqs. blk-iocost: Fix an UBSAN shift-out-of-bounds warning nvme: use ns->head->pi_size instead of t10_pi_tuple structure size nvme-core: fix comment to reflect right functions nvme: move passthrough logging attribute to head blk-wbt: Fix detection of dirty-throttled tasks nvme-host: fix the updating of the firmware version
| * \ \ \ Merge tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme into block-6.8Jens Axboe2024-02-084-23/+25
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NVMe fixes from Keith: "nvme fixes for Linux 6.8 - Update a potentially stale firmware attribute (Maurizio) - Fixes for the recent verbose error logging (Keith, Chaitanya) - Protection information payload size fix for passthrough (Francis)" * tag 'nvme-6.8-2023-02-08' of git://git.infradead.org/nvme: nvme: use ns->head->pi_size instead of t10_pi_tuple structure size nvme-core: fix comment to reflect right functions nvme: move passthrough logging attribute to head nvme-host: fix the updating of the firmware version
| | * | | | nvme: use ns->head->pi_size instead of t10_pi_tuple structure sizeFrancis Pravin2024-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently kernel supports 8 byte and 16 byte protection information. So, use ns->head->pi_size instead of sizeof(struct t10_pi_tuple). Signed-off-by: Francis Pravin <francis.p@samsung.com> Signed-off-by: Sathyavathi M <sathya.m@samsung.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
| | * | | | nvme-core: fix comment to reflect right functionsChaitanya Kulkarni2024-02-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions and the attribute listed in the comment doesn't exists in the code, (ns->logging_enabled, nvme_passthru_err_log_enabled_store() and nvme_passthru_err_log_enabled_show()) Update the comment with right function names and a comment ns->head->passthru_err_log_enabled, nvme_io_passthru_err_log_enabled_store() and nvme_io_passthru_err_log_enabled_show(). Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
| | * | | | nvme: move passthrough logging attribute to headKeith Busch2024-02-073-18/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The namespace does not have attributes, but the head does. Move the new logging attribute to that structure instead of dereferencing the wrong type. And while we're here, fix the reverse-tree coding style. Fixes: 9f079dda14339e ("nvme: allow passthru cmd error logging") Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com> Tested-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org>
| | * | | | nvme-host: fix the updating of the firmware versionMaurizio Lombardi2024-02-011-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original code didn't update the firmware version if the "next slot" of the AFI register isn't zero or if the "current slot" field is zero; in those cases it assumed that a reset was needed. However, the NVMe specification doesn't exclude the possibility that the "next slot" value is equal to the "current slot" value, meaning that the same firmware slot will be activated after performing a controller level reset; in this case a reset is clearly not necessary and we can safely update the firmware version. Modify the code so the kernel will report that a Controller Level Reset is needed only in the following cases: 1) If the "current slot" field is zero. This is invalid and means that something is wrong, a reset is needed. or 2) if the "next slot" field isn't zero AND it's not equal to the "current slot" value. This means that at the next reset a different firmware slot will be activated. Fixes: 983a338b96c8 ("nvme: update firmware version after commit") Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org>
| * | | | | virtio-blk: Ensure no requests in virtqueues before deleting vqs.Yi Sun2024-02-081-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure no remaining requests in virtqueues before resetting vdev and deleting virtqueues. Otherwise these requests will never be completed. It may cause the system to become unresponsive. Function blk_mq_quiesce_queue() can ensure that requests have become in_flight status, but it cannot guarantee that requests have been processed by the device. Virtqueues should never be deleted before all requests become complete status. Function blk_mq_freeze_queue() ensure that all requests in virtqueues become complete status. And no requests can enter in virtqueues. Signed-off-by: Yi Sun <yi.sun@unisoc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Link: https://lore.kernel.org/r/20240129085250.1550594-1-yi.sun@unisoc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | blk-iocost: Fix an UBSAN shift-out-of-bounds warningTejun Heo2024-02-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iocg_kick_delay() is called from a CPU different than the one which set the delay, @now may be in the past of @iocg->delay_at leading to the following warning: UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23 shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <TASK> dump_stack_lvl+0x79/0xc0 __ubsan_handle_shift_out_of_bounds+0x2ab/0x300 iocg_kick_delay+0x222/0x230 ioc_rqos_merge+0x1d7/0x2c0 __rq_qos_merge+0x2c/0x80 bio_attempt_back_merge+0x83/0x190 blk_attempt_plug_merge+0x101/0x150 blk_mq_submit_bio+0x2b1/0x720 submit_bio_noacct_nocheck+0x320/0x3e0 __swap_writepage+0x2ab/0x9d0 The underflow itself doesn't really affect the behavior in any meaningful way; however, the past timestamp may exaggerate the delay amount calculated later in the code, which shouldn't be a material problem given the nature of the delay mechanism. If @now is in the past, this CPU is racing another CPU which recently set up the delay and there's nothing this CPU can contribute w.r.t. the delay. Let's bail early from iocg_kick_delay() in such cases. Reported-by: Breno Leitão <leitao@debian.org> Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 5160a5a53c0c ("blk-iocost: implement delay adjustment hysteresis") Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | | blk-wbt: Fix detection of dirty-throttled tasksJan Kara2024-02-064-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The detection of dirty-throttled tasks in blk-wbt has been subtly broken since its beginning in 2016. Namely if we are doing cgroup writeback and the throttled task is not in the root cgroup, balance_dirty_pages() will set dirty_sleep for the non-root bdi_writeback structure. However blk-wbt checks dirty_sleep only in the root cgroup bdi_writeback structure. Thus detection of recently throttled tasks is not working in this case (we noticed this when we switched to cgroup v2 and suddently writeback was slow). Since blk-wbt has no easy way to get to proper bdi_writeback and furthermore its intention has always been to work on the whole device rather than on individual cgroups, just move the dirty_sleep timestamp from bdi_writeback to backing_dev_info. That fixes the checking for recently throttled task and saves memory for everybody as a bonus. CC: stable@vger.kernel.org Fixes: b57d74aff9ab ("writeback: track if we're sleeping on progress in balance_dirty_pages()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240123175826.21452-1-jack@suse.cz [axboe: fixup indentation errors] Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | | Merge tag 'firewire-fixes-6.8-rc4' of ↵Linus Torvalds2024-02-101-1/+17
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "A change to accelerate the device detection step in some cases. In the self-identification step after bus-reset, all nodes in the same bus broadcast selfID packet including the value of gap count. The value is related to the cable hops between nodes, and used to calculate the subaction gap and the arbitration reset gap. When each node has the different value of the gap count, the asynchronous communication between them is unreliable, since an asynchronous transaction could be interrupted by another asynchronous transaction before completion. The gap count inconsistency can be resolved by several ways; e.g. the transfer of PHY configuration packet and generation of bus-reset. The current implementation of firewire stack can correctly detect the gap count inconsistency, however the recovery action from the inconsistency tends to be delayed after reading configuration ROM of root node. This results in the long time to probe devices in some combinations of hardware. Here the stack is changed to schedule the action as soon as possible" * tag 'firewire-fixes-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: send bus reset promptly on gap count error
| * | | | | | firewire: core: send bus reset promptly on gap count errorTakashi Sakamoto2024-02-071-1/+17
| | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are bus manager and the bus has inconsistent gap counts, send a bus reset immediately instead of trying to read the root node's config ROM first. Otherwise, we could spend a lot of time trying to read the config ROM but never succeeding. This eliminates a 50+ second delay before the FireWire bus is usable after a newly connected device is powered on in certain circumstances. The delay occurs if a gap count inconsistency occurs, we are not the root node, and we become bus manager. One scenario that causes this is with a TI XIO2213B OHCI, the first time a Sony DSR-25 is powered on after being connected to the FireWire cable. In this configuration, the Linux box will not receive the initial PHY configuration packet sent by the DSR-25 as IRM, resulting in the DSR-25 having a gap count of 44 while the Linux box has a gap count of 63. FireWire devices have a gap count parameter, which is set to 63 on power-up and can be changed with a PHY configuration packet. This determines the duration of the subaction and arbitration gaps. For reliable communication, all nodes on a FireWire bus must have the same gap count. A node may have zero or more of the following roles: root node, bus manager (BM), isochronous resource manager (IRM), and cycle master. Unless a root node was forced with a PHY configuration packet, any node might become root node after a bus reset. Only the root node can become cycle master. If the root node is not cycle master capable, the BM or IRM should force a change of root node. After a bus reset, each node sends a self-ID packet, which contains its current gap count. A single bus reset does not change the gap count, but two bus resets in a row will set the gap count to 63. Because a consistent gap count is required for reliable communication, IEEE 1394a-2000 requires that the bus manager generate a bus reset if it detects that the gap count is inconsistent. When the gap count is inconsistent, build_tree() will notice this after the self identification process. It will set card->gap_count to the invalid value 0. If we become bus master, this will force bm_work() to send a bus reset when it performs gap count optimization. After a bus reset, there is no bus manager. We will almost always try to become bus manager. Once we become bus manager, we will first determine whether the root node is cycle master capable. Then, we will determine if the gap count should be changed. If either the root node or the gap count should be changed, we will generate a bus reset. To determine if the root node is cycle master capable, we read its configuration ROM. bm_work() will wait until we have finished trying to read the configuration ROM. However, an inconsistent gap count can make this take a long time. read_config_rom() will read the first few quadlets from the config ROM. Due to the gap count inconsistency, eventually one of the reads will time out. When read_config_rom() fails, fw_device_init() calls it again until MAX_RETRIES is reached. This takes 50+ seconds. Once we give up trying to read the configuration ROM, bm_work() will wake up, assume that the root node is not cycle master capable, and do a bus reset. Hopefully, this will resolve the gap count inconsistency. This change makes bm_work() check for an inconsistent gap count before waiting for the root node's configuration ROM. If the gap count is inconsistent, bm_work() will immediately do a bus reset. This eliminates the 50+ second delay and rapidly brings the bus to a working state. I considered that if the gap count is inconsistent, a PHY configuration packet might not be successful, so it could be desirable to skip the PHY configuration packet before the bus reset in this case. However, IEEE 1394a-2000 and IEEE 1394-2008 say that the bus manager may transmit a PHY configuration packet before a bus reset when correcting a gap count error. Since the standard endorses this, I decided it's safe to retain the PHY configuration packet transmission. Normally, after a topology change, we will reset the bus a maximum of 5 times to change the root node and perform gap count optimization. However, if there is a gap count inconsistency, we must always generate a bus reset. Otherwise the gap count inconsistency will persist and communication will be unreliable. For that reason, if there is a gap count inconstency, we generate a bus reset even if we already reached the 5 reset limit. Signed-off-by: Adam Goldman <adamg@pobox.com> Reference: https://sourceforge.net/p/linux1394/mailman/message/58727806/ Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
* | | | | | Merge tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds2024-02-102-2/+7
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull smb server fixes from Steve French: "Two ksmbd server fixes: - memory leak fix - a minor kernel-doc fix" * tag '6.8-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read fails ksmbd: Add kernel-doc for ksmbd_extract_sharename() function
| * | | | | | ksmbd: free aux buffer if ksmbd_iov_pin_rsp_read failsFedor Pchelkin2024-02-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ksmbd_iov_pin_rsp_read() doesn't free the provided aux buffer if it fails. Seems to be the caller's responsibility to clear the buffer in error case. Found by Linux Verification Center (linuxtesting.org). Fixes: e2b76ab8b5c9 ("ksmbd: add support for read compound") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
| * | | | | | ksmbd: Add kernel-doc for ksmbd_extract_sharename() functionYang Li2024-02-081-0/+1
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ksmbd_extract_sharename() function lacked a complete kernel-doc comment. This patch adds parameter descriptions and detailed function behavior to improve code readability and maintainability. Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
* | | | | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2024-02-104-10/+14
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three small driver fixes and one core fix. The core fix being a fixup to the one in the last pull request which didn't entirely move checking of scsi_host_busy() out from under the host lock" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare() scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd() scsi: lpfc: Use unsigned type for num_sge scsi: core: Move scsi_host_busy() out of host lock if it is for per-command
| * | | | | | scsi: ufs: core: Remove the ufshcd_release() in ufshcd_err_handling_prepare()SEO HOYOUNG2024-02-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If ufshcd_err_handler() is called in a suspend/resume situation, ufs_release() can be called twice and active_reqs end up going negative. This is because ufshcd_err_handling_prepare() and ufshcd_err_handling_unprepare() both call ufshcd_release(). Remove superfluous call to ufshcd_release(). Signed-off-by: SEO HOYOUNG <hy50.seo@samsung.com> Link: https://lore.kernel.org/r/20240122083324.11797-1-hy50.seo@samsung.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | scsi: ufs: core: Fix shift issue in ufshcd_clear_cmd()Alice Chao2024-02-051-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When task_tag >= 32 (in MCQ mode) and sizeof(unsigned int) == 4, 1U << task_tag will out of bounds for a u32 mask. Fix this up to prevent SHIFT_ISSUE (bitwise shifts that are out of bounds for their data type). [name:debug_monitors&]Unexpected kernel BRK exception at EL1 [name:traps&]Internal error: BRK handler: 00000000f2005514 [#1] PREEMPT SMP [name:mediatek_cpufreq_hw&]cpufreq stop DVFS log done [name:mrdump&]Kernel Offset: 0x1ba5800000 from 0xffffffc008000000 [name:mrdump&]PHYS_OFFSET: 0x80000000 [name:mrdump&]pstate: 22400005 (nzCv daif +PAN -UAO) [name:mrdump&]pc : [0xffffffdbaf52bb2c] ufshcd_clear_cmd+0x280/0x288 [name:mrdump&]lr : [0xffffffdbaf52a774] ufshcd_wait_for_dev_cmd+0x3e4/0x82c [name:mrdump&]sp : ffffffc0081471b0 <snip> Workqueue: ufs_eh_wq_0 ufshcd_err_handler Call trace: dump_backtrace+0xf8/0x144 show_stack+0x18/0x24 dump_stack_lvl+0x78/0x9c dump_stack+0x18/0x44 mrdump_common_die+0x254/0x480 [mrdump] ipanic_die+0x20/0x30 [mrdump] notify_die+0x15c/0x204 die+0x10c/0x5f8 arm64_notify_die+0x74/0x13c do_debug_exception+0x164/0x26c el1_dbg+0x64/0x80 el1h_64_sync_handler+0x3c/0x90 el1h_64_sync+0x68/0x6c ufshcd_clear_cmd+0x280/0x288 ufshcd_wait_for_dev_cmd+0x3e4/0x82c ufshcd_exec_dev_cmd+0x5bc/0x9ac ufshcd_verify_dev_init+0x84/0x1c8 ufshcd_probe_hba+0x724/0x1ce0 ufshcd_host_reset_and_restore+0x260/0x574 ufshcd_reset_and_restore+0x138/0xbd0 ufshcd_err_handler+0x1218/0x2f28 process_one_work+0x5fc/0x1140 worker_thread+0x7d8/0xe20 kthread+0x25c/0x468 ret_from_fork+0x10/0x20 Signed-off-by: Alice Chao <alice.chao@mediatek.com> Link: https://lore.kernel.org/r/20240205104905.24929-1-alice.chao@mediatek.com Reviewed-by: Stanley Jhu <chu.stanley@gmail.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 12:17:13 +0100