summaryrefslogtreecommitdiffstats
path: root/Documentation/admin-guide (unfollow)
Commit message (Collapse)AuthorFilesLines
2019-01-11ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAMMiquel Raynal1-9/+18
A3700 comphy initialization is done in the firmware (TF-A). Looking at the SATA PHY initialization routine, there is a comment about "vendor specific" registers. Two registers are mentioned. They are not initialized there in the firmware because they are AHCI related, while the firmware at this location does only PHY configuration. The solution to avoid doing such initialization is relying on U-Boot. While this work at boot time, U-Boot is definitely not going to run during a resume after suspending to RAM. Two possible solutions were considered: * Fixing the firmware. * Fixing the kernel driver. The first solution would take ages to propagate, while the second solution is easy to implement as the driver as been a little bit reworked to prepare for such platform configuration. Hence, this patch adds an Armada 3700 configuration function to set these two registers both at boot time (in the probe) and after a suspend (in the resume path). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCsMiquel Raynal1-17/+51
At the beginning, only Armada 38x SoCs where supported by the ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") introduced Armada 3700 support. As opposed to Armada 38x SoCs, the 3700 variants do not have to configure mbus and the regret option. This patch took care of avoiding such configuration when not needed in the probe function, but failed to do the same in the resume path. While doing so looks harmless by experience, let's clean the driver logic and avoid doing this useless configuration with Armada 3700 SoCs. Because the logic is very similar between these two places, it has been decided to factorize this code and put it in a "Armada 38x configuration function". This function is part of a new (per-compatible) platform data structure, so that the addition of such configuration function for Armada 3700 will be eased. Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: ahci: mvebu: remove stale commentMiquel Raynal1-5/+0
For Armada-38x (32-bit) SoCs, PM platform support has been added since: commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the introduction of Armada 38x support") commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support") For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM platform support has always existed. There are even suspend/resume hooks in this driver since: commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Remove the stale comment at the end of this driver stating that all the above does not exist yet. Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-11ata: libahci_platform: comply to PHY frameworkMiquel Raynal2-0/+15
Current implementation of the libahci does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). PHYs should also be handled at suspend/resume time. For this, call ahci_platform_enable/disable_phys() at suspend/resume_host() time. These calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of the libahci driver must set manually in hpriv->flags at probe time. This is to avoid breaking users that have not been tested with this change. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-10loop: drop caches if offset or block_size are changedJaegeuk Kim1-2/+33
If we don't drop caches used in old offset or block_size, we can get old data from new offset/block_size, which gives unexpected data to user. For example, Martijn found a loopback bug in the below scenario. 1) LOOP_SET_FD loads first two pages on loop file 2) LOOP_SET_STATUS64 changes the offset on the loop file 3) mount is failed due to the cached pages having wrong superblock Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-block@vger.kernel.org Reported-by: Martijn Coenen <maco@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09block: fix kerneldoc comment for blk_attempt_plug_merge()Jonathan Corbet1-1/+0
Commit 5f0ed774ed29 ("block: sum requests in the plug structure") removed the request_count parameter from block_attempt_plug_merge(), but did not remove the associated kerneldoc comment, introducing this warning to the docs build: ./block/blk-core.c:685: warning: Excess function parameter 'request_count' description in 'blk_attempt_plug_merge' Remove the obsolete description and make things a little quieter. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09nvme: don't initlialize ctrl->cntlid twiceAndrey Smirnov1-1/+0
ctrl->cntlid will already be initialized from id->cntlid for non-NVME_F_FABRICS controllers few lines below. For NVME_F_FABRICS controllers this field should already be initialized, otherwise the check if (ctrl->cntlid != le16_to_cpu(id->cntlid)) below will always be a no-op. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQNJames Dingwall3-7/+16
If a device provides an NQN it is expected to be globally unique. Unfortunately some firmware revisions for Intel 760p/Pro 7600p devices did not satisfy this requirement. In these circumstances if a system has >1 affected device then only one device is enabled. If this quirk is enabled then the device supplied subnqn is ignored and we fallback to generating one as if the field was empty. In this case we also suppress the version check so we don't print a warning when the quirk is enabled. Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: James Dingwall <james@dingwall.me.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme: pad fake subsys NQN vid and ssvid with zerosKeith Busch1-1/+1
We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-multipath: zero out ANA log bufferHannes Reinecke1-0/+2
When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-fabrics: unset write/poll queues for discovery controllersSagi Grimberg1-0/+2
Even if user-space sent it to us, it got it wrong so lets help by disallowing it. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: don't ask if controller is fabricsSagi Grimberg1-9/+6
For sure we are a fabric driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-tcp: remove dead codeSagi Grimberg1-1/+0
We should never touch the opal device from the transport driver. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix out of bounds access in nvme_cqe_pendingHongbo Yao1-1/+3
There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by: Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: rerun irq setup on IO queue init errorsKeith Busch1-14/+36
If the driver is unable to create a subset of IO queues for any reason, the read/write and polled queue sets will not match the actual allocated hardware contexts. This leaves gaps in the CPU affinity mappings and causes the following kernel panic after blk_mq_map_queue_type() returns a NULL hctx. BUG: unable to handle kernel NULL pointer dereference at 0000000000000198 #PF error: [normal kernel read fault] PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 64 PID: 1171 Comm: kworker/u259:1 Not tainted 4.20.0+ #241 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:blk_mq_init_allocated_queue+0x2d9/0x440 RSP: 0018:ffffb1bf0abc3cd0 EFLAGS: 00010286 RAX: 000000000000001f RBX: ffff8ea744cf0718 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 000000000000007c RDI: ffffffff9109a820 RBP: ffff8ea7565f7008 R08: 000000000000001f R09: 000000000000003f R10: ffffb1bf0abc3c00 R11: 0000000000000000 R12: 000000000001d008 R13: ffff8ea7565f7008 R14: 000000000000003f R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8ea757200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000198 CR3: 0000000013058000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_init_queue+0x35/0x60 nvme_validate_ns+0xc6/0x7c0 [nvme_core] ? nvme_identify_ctrl.isra.56+0x7e/0xc0 [nvme_core] nvme_scan_work+0xc8/0x340 [nvme_core] ? __wake_up_common+0x6d/0x120 ? try_to_wake_up+0x55/0x410 process_one_work+0x1e9/0x3d0 worker_thread+0x2d/0x3d0 ? process_one_work+0x3d0/0x3d0 kthread+0x111/0x130 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 Modules linked in: nvme nvme_core serio_raw CR2: 0000000000000198 Fix by re-running the interrupt vector setup from scratch using a reduced count that may be successful until the created queues matches the irq affinity plus polling queue sets. Signed-off-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: use the same attributes when freeing host_mem_desc_bufs.Liviu Dudau1-4/+6
When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by: Liviu Dudau <liviu@dudau.co.uk> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09nvme-pci: fix the wrong setting of nr_mapsJianchao Wang1-1/+0
We only set the nr_maps to 3 if poll queues are supported. Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-09block: doc: add slice_idle_us to bfq documentationJohn Pittman1-0/+7
Of the tunables available for the bfq I/O scheduler, the only one missing from the documentation in 'Documentation/block/bfq-iosched.txt' is slice_idle_us. Add this tunable to the documentation and a short explanation of its purpose. Acked-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-09block: clarify documentation for blk_{start|finish}_plugJeff Moyer1-0/+19
There was some confusion about what these functions did. Make it clear that this is a hint for upper layers to pass to the block layer, and that it does not guarantee that I/O will not be submitted between a start and finish plug. Reported-by: "Darrick J. Wong" <darrick.wong@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-06null_blk: add zoned config support informationJohn Pittman2-1/+3
If the kernel is built without CONFIG_BLK_DEV_ZONED, a modprobe of the null_blk driver with zoned=1 fails with 'Invalid argument'. This can be confusing to users, prompting a search as to why the parameter is invalid. To assist in that search, add a bit more information to the failure, additionally adding to the documentation that CONFIG_BLK_DEV_ZONED is needed for zoned=1. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: John Pittman <jpittman@redhat.com> Added null_blk prefix to error message. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-05block: add documentation for io_timeoutWeiping Zhang2-0/+16
Add documentation for /sys/block/<disk>/queue/io_timeout. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Weiping Zhang <zhangweiping@didiglobal.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-04Add CREDITS entry for Shaohua LiJens Axboe1-0/+6
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-03block: sunvdc: don't run hw queue synchronously from irq contextMing Lei1-1/+1
vdc_blk_queue_start() may be called from irq context, so we can't run queue via blk_mq_start_hw_queues() since we never allow to run queue from irq context. Use blk_mq_start_stopped_hw_queues(q, true) to fix this issue. Fixes: fa182a1fa97dff56cd ("sunvdc: convert to blk-mq") Reported-by: Anatoly Pugachev <matorola@gmail.com> Tested-by: Anatoly Pugachev <matorola@gmail.com> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: sparclinux@vger.kernel.org Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-02block: don't use un-ordered __set_current_state(TASK_UNINTERRUPTIBLE)Linus Torvalds3-9/+4
This mostly reverts commit 849a370016a5 ("block: avoid ordered task state change for polled IO"). It was wrongly claiming that the ordering wasn't necessary. The memory barrier _is_ necessary. If something is truly polling and not going to sleep, it's the whole state setting that is unnecessary, not the memory barrier. Whenever you set your state to a sleeping state, you absolutely need the memory barrier. Note that sometimes the memory barrier can be elsewhere. For example, the ordering might be provided by an external lock, or by setting the process state to sleeping before adding yourself to the wait queue list that is used for waking up (where the wait queue lock itself will guarantee that any wakeup will correctly see the sleeping state). But none of those cases were true here. NOTE! Some of the polling paths may indeed be able to drop the state setting entirely, at which point the memory barrier also goes away. (Also note that this doesn't revert the TASK_RUNNING cases: there is no race between a wakeup and setting the process state to TASK_RUNNING, since the end result doesn't depend on ordering). Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-02sunrpc: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li1-16/+3
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: Add xprt after nfs4_test_session_trunk()Santosh kumar pradhan5-9/+15
Multipathing: In case of NFSv3, rpc_clnt_test_and_add_xprt() adds the xprt to xprt switch (i.e. xps) if rpc_call_null_helper() returns success. But in case of NFSv4.1, it needs to do EXCHANGEID to verify the path along with check for session trunking. Add the xprt in nfs4_test_session_trunk() only when nfs4_detect_session_trunking() returns success. Also release refcount hold by rpc_clnt_setup_test_and_add_xprt(). Signed-off-by: Santosh kumar pradhan <santoshkumar.pradhan@wdc.com> Tested-by: Suresh Jayaraman <suresh.jayaraman@wdc.com> Reported-by: Aditya Agnihotri <aditya.agnihotri@wdc.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFSJ. Bruce Fields1-2/+2
It's OK to sleep here, we just don't want to recurse into the filesystem as a writeout could be waiting on this. Future work: the documentation for GFP_NOFS says "Please try to avoid using this flag directly and instead use memalloc_nofs_{save,restore} to mark the whole scope which cannot/shouldn't recurse into the FS layer with a short explanation why. All allocation requests will inherit GFP_NOFS implicitly." But I'm not sure where to do this. Should the workqueue be arranging that for us in the case of workqueues created with WQ_MEM_RECLAIM? Reported-by: Trond Myklebust <trondmy@hammer.space> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02sunrpc: handle ENOMEM in rpcb_getport_asyncJ. Bruce Fields1-0/+8
If we ignore the error we'll hit a null dereference a little later. Reported-by: syzbot+4b98281f2401ab849f4b@syzkaller.appspotmail.com Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02NFS: remove unnecessary test for IS_ERR(cred)NeilBrown1-5/+0
As gte_current_cred() cannot return an error, this test is not necessary. It hasn't been necessary for years, but it wasn't so obvious before. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Prevent leak of rpcrdma_rep objectsChuck Lever2-0/+32
If a reply has been processed but the RPC is later retransmitted anyway, the req->rl_reply field still contains the only pointer to the old rpcrdma rep. When the next reply comes in, the reply handler will stomp on the rl_reply field, leaking the old rep. A trace event is added to capture such leaks. This problem seems to be worsened by the restructuring of the RPC Call path in v4.20. Fully addressing this issue will require at least a re-architecture of the disconnect logic, which is not appropriate during -rc. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02NFSv4.2 fix async copy reboot recoveryOlga Kornievskaia1-1/+1
Original commit (e4648aa4f98a "NFS recover from destination server reboot for copies") used memcmp() and then it was changed to use nfs4_stateid_match_other() but that function returns opposite of memcmp. As the result, recovery can't find the copy leading to copy hanging. Fixes: 80f42368868e ("NFSv4: Split out NFS v4.2 copy completion functions") Fixes: cb7a8384dc02 ("NFS: Split out the body of nfs4_reclaim_open_state") Signed-of-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Don't leak freed MRsChuck Lever1-12/+15
Defensive clean up. Don't set frwr->fr_mr until we know that the scatterlist allocation has succeeded. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Add documenting comment for rpcrdma_buffer_destroyChuck Lever1-0/+8
Make a note of the function's dependency on an earlier ib_drain_qp. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Replace outdated comment for rpcrdma_ep_postChuck Lever1-3/+7
Since commit 7c8d9e7c8863 ("xprtrdma: Move Receive posting to Receive handler"), rpcrdma_ep_post is no longer responsible for posting Receive buffers. Update the documenting comment to reflect this change. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Update comments in frwr_op_sendChuck Lever1-2/+2
Commit f2877623082b ("xprtrdma: Chain Send to FastReg WRs") was written before commit ce5b37178283 ("xprtrdma: Replace all usage of "frmr" with "frwr""), but was merged afterwards. Thus it still refers to FRMR and MWs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02SUNRPC: Fix some kernel doc complaintsChuck Lever4-4/+6
Clean up some warnings observed when building with "make W=1". Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02SUNRPC: Simplify defining common RPC trace eventsChuck Lever1-103/+69
Clean up, no functional change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02NFS: Fix NFSv4 symbolic trace point outputChuck Lever1-143/+313
These symbolic values were not being displayed in string form. TRACE_DEFINE_ENUM was missing in many cases. It also turns out that __print_symbolic wants an unsigned long in the first field... Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Trace mapping, alloc, and dereg failuresChuck Lever4-10/+144
These are rare, but can be helpful at tracking down DMAR and other problems. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Add trace points for calls to transport switch methodsChuck Lever2-11/+17
Name them "trace_xprtrdma_op_*" so they can be easily enabled as a group. No trace point is added where the generic layer already has observability. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Relocate the xprtrdma_mr_map trace pointsChuck Lever1-1/+1
The mr_map trace points were capturing information about the previous use of the MR rather than about the segment that was just mapped. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Clean up of xprtrdma chunk trace pointsChuck Lever2-19/+29
The chunk-related trace points capture nearly the same information as the MR-related trace points. Also, rename them so globbing can be used to enable or disable these trace points more easily. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove unused fields from rpcrdma_iaChuck Lever1-2/+0
Clean up. The last use of these fields was in commit 173b8f49b3af ("xprtrdma: Demote "connect" log messages") . Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Cull dprintk() call sitesChuck Lever4-68/+19
Clean up: Remove dprintk() call sites that report rare or impossible errors. Leave a few that display high-value low noise status information. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Simplify locking that protects the rl_allreqs listChuck Lever3-35/+23
Clean up: There's little chance of contention between the use of rb_lock and rb_reqslock, so merge the two. This avoids having to take both in some (possibly future) cases. Transport tear-down is already serialized, thus there is no need for locking at all when destroying rpcrdma_reqs. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Expose transport header errorsChuck Lever1-1/+0
For better observability of parsing errors, return the error code generated in the decoders to the upper layer consumer. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Remove request_module from backchannelChuck Lever1-2/+0
Since commit ffe1f0df5862 ("rpcrdma: Merge svcrdma and xprtrdma modules into one"), the forward and backchannel components are part of the same kernel module. A separate request_module() call in the backchannel code is no longer necessary. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Recognize XDRBUF_SPARSE_PAGESChuck Lever1-5/+6
Commit 431f6eb3570f ("SUNRPC: Add a label for RPC calls that require allocation on receive") didn't update similar logic in rpc_rdma.c. I don't think this is a bug, per-se; the commit just adds more careful checking for broken upper layer behavior. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02NFS: Make "port=" mount option optional for RDMA mountsChuck Lever1-2/+8
Having to specify "proto=rdma,port=20049" is cumbersome. RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative well-known port number", which is 20049. Make the use of the well- known port number automatic, just as it is for NFS/TCP and port 2049. For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as the default or use rpcbind. I don't know of an NFS/RDMA server implementation that registers it's NFS/RDMA service with rpcbind, so automatically choosing 20049 seems like the better choice. The other widely-deployed NFS/RDMA client, Solaris, also uses 20049 as the default port. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-01-02xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR)Chuck Lever3-5/+8
Place the associated RPC transaction's XID in the upper 32 bits of each RDMA segment's rdma_offset field. There are two reasons to do this: - The R_key only has 8 bits that are different from registration to registration. The XID adds more uniqueness to each RDMA segment to reduce the likelihood of a software bug on the server reading from or writing into memory it's not supposed to. - On-the-wire RDMA Read and Write requests do not otherwise carry any identifier that matches them up to an RPC. The XID in the upper 32 bits will act as an eye-catcher in network captures. Suggested-by: Tom Talpey <ttalpey@microsoft.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-22 16:59:40 +0100