| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Problem: When using kdb via keyboard it does not react to control
characters which are supported in serial mode.
Example: Chords such as ctrl+a/e/d/p do not work in keyboard mode
Solution: Before disregarding non-printable key characters, check if they
are one of the supported control characters, I have took the control
characters from the switch case upwards in this function that translates
scan codes of arrow keys/backspace/home/.. to the control characters.
Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Nir Lichtman <nir@lichtman.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241111215622.GA161253@lichtman.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Going forward, I'll be using my kernel.org address for upstream work.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241108-new-maintainer-address-2-v1-2-47c9d71aac11@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Support for Tegra234 was added to the tegra186 driver in 1db9b241bb56 (
"gpio: tegra186: Add support for Tegra234"). But the driver is not
selectable on Tegra234. Update the Kconfig entry to allow the driver to be
enabled on Tegra234.
Enable the driver by default on Tegra 234 as well, similar to the other
platforms it supports.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241113162939.886242-1-lars@metafoo.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in grgpio_probe is not checked.
Add NULL check in grgpio_probe, to handle kernel NULL
pointer dereference error.
Cc: stable@vger.kernel.org
Fixes: 7eb6ce2f2723 ("gpio: Convert to using %pOF instead of full_name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20241114091822.78199-1-hanchunchao@inspur.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
|
|
io_create_region() jumps after a vmap failure without setting the return
code, it could be 0 or just uninitialised.
Fixes: dfbbfbf191878 ("io_uring: introduce concept of memory regions")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0abac19dbf81c061cffaa9534a2471ed5460ad3e.1731803848.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Revert d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()") as
suggested by Chuck [1]. It is causing deadlocks when accessing tmpfs over
NFS.
As Hugh commented, "added just to silence a syzbot sanitizer splat: added
where there has never been any practical problem".
Link: https://lkml.kernel.org/r/ZzdxKF39VEmXSSyN@tissot.1015granger.net [1]
Fixes: d949d1d14fa2 ("mm: shmem: fix data-race in shmem_getattr()")
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 74e1006430a5377228e49310f6d915628609929e.
This causes a regression in the workload selection.
A more extensive fix is being worked on.
For now, revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3618
Fixes: 74e1006430a5 ("drm/amd/pm: correct the workload setting")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the APLIC driver is probed before the IMSIC driver, the parent MSI
domain will be missing, which causes a NULL pointer dereference in
msi_create_device_irq_domain().
Avoid this by deferring probe until the parent MSI domain is available. Use
dev_err_probe() to avoid printing an error message when returning
-EPROBE_DEFER.
Fixes: ca8df97fe679 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241114200133.3069460-1-samuel.holland@sifive.com
|
|
The Code of Conduct committee's goal first and foremost is to bring about
change to ensure our community continues to foster respectful discussions.
In the interest of transparency, the CoC enforcement policy is formalized
for unacceptable behaviors.
Update the Code of Conduct Interpretation document with the enforcement
information.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20241114205649.44179-1-skhan@linuxfoundation.org
|
|
There are two places where WARN_ON_ONCE() is called two times
in the error paths. One which is encapsulated into if() condition
and another one, which is unnecessary, is placed in the brackets.
Remove an extra WARN_ON_ONCE() splat which is in brackets.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
A static analyzer for C, Smatch, reports and triggers below
warnings:
kernel/rcu/rcuscale.c:1215 rcu_scale_init()
warn: inconsistent returns 'global &fullstop_mutex'.
The checker complains about, we do not unlock the "fullstop_mutex"
mutex, in case of hitting below error path:
<snip>
...
if (WARN_ON_ONCE(jiffies_at_lazy_cb - jif_start < 2 * HZ)) {
pr_alert("ERROR: call_rcu() CBs are not being lazy as expected!\n");
WARN_ON_ONCE(1);
return -1;
^^^^^^^^^^
...
<snip>
it happens because "-1" is returned right away instead of
doing a proper unwinding.
Fix it by jumping to "unwind" label instead of returning -1.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Closes: https://lore.kernel.org/rcu/ZxfTrHuEGtgnOYWp@pc636/T/
Fixes: 084e04fff160 ("rcuscale: Add laziness and kfree tests")
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Currently, srcu_read_lock_lite() uses the SRCU_READ_FLAVOR_LITE bit in
->srcu_reader_flavor to communicate to the grace-period processing in
srcu_readers_active_idx_check() that the smp_mb() must be replaced by a
synchronize_rcu(). Unfortunately, ->srcu_reader_flavor is not updated
unless the kernel is built with CONFIG_PROVE_RCU=y. Therefore in all
kernels built with CONFIG_PROVE_RCU=n, srcu_readers_active_idx_check()
incorrectly uses smp_mb() instead of synchronize_rcu() for srcu_struct
structures whose readers use srcu_read_lock_lite().
This commit therefore causes Tree SRCU srcu_read_lock_lite()
to unconditionally update ->srcu_reader_flavor so that
srcu_readers_active_idx_check() can make the correct choice.
Reported-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Closes: https://lore.kernel.org/all/d07e8f4a-d5ff-4c8e-8e61-50db285c57e9@amd.com/
Fixes: c0f08d6b5a61 ("srcu: Add srcu_read_lock_lite() and srcu_read_unlock_lite()")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Now we've got a more generic region registration API, place
IORING_ENTER_EXT_ARG_REG and re-enable it.
First, the user has to register a region with the
IORING_MEM_REGION_REG_WAIT_ARG flag set. It can only be done for a
ring in a disabled state, aka IORING_SETUP_R_DISABLED, to avoid races
with already running waiters. With that we should have stable constant
values for ctx->cq_wait_{size,arg} in io_get_ext_arg_reg() and hence no
READ_ONCE required.
The other API difference is that we're now passing byte offsets instead
of indexes. The user _must_ align all offsets / pointers to the native
word size, failing to do so might but not necessarily has to lead to a
failure usually returned as -EFAULT. liburing will be hiding this
details from users.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/81822c1b4ffbe8ad391b4f9ad1564def0d26d990.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Moving the official git tree to the MDRAID Group account.
Signed-off-by: Song Liu <song@kernel.org>
|
|
Regions will serve multiple purposes. First, with it we can decouple
ring/etc. object creation from registration / mapping of the memory they
will be placed in. We already have hacks that allow to put both SQ and
CQ into the same huge page, in the future we should be able to:
region = create_region(io_ring);
create_pbuf_ring(io_uring, region, offset=0);
create_pbuf_ring(io_uring, region, offset=N);
The second use case is efficiently passing parameters. The following
patch enables back on top of regions IORING_ENTER_EXT_ARG_REG, which
optimises wait arguments. It'll also be useful for request arguments
replacing iovecs, msghdr, etc. pointers. Eventually it would also be
handy for BPF as well if it comes to fruition.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0798cf3a14fad19cfc96fc9feca5f3e11481691d.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We've got a good number of mappings we share with the userspace, that
includes the main rings, provided buffer rings, upcoming rings for
zerocopy rx and more. All of them duplicate user argument parsing and
some internal details as well (page pinnning, huge page optimisations,
mmap'ing, etc.)
Introduce a notion of regions. For userspace for now it's just a new
structure called struct io_uring_region_desc which is supposed to
parameterise all such mapping / queue creations. A region either
represents a user provided chunk of memory, in which case the user_addr
field should point to it, or a request for the kernel to allocate the
memory, in which case the user would need to mmap it after using the
offset returned in the mmap_offset field. With a uniform userspace API
we can avoid additional boiler plate code and apply future optimisation
to all of them at once.
Internally, there is a new structure struct io_mapped_region holding all
relevant runtime information and some helpers to work with it. This
patch limits it to user provided regions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0e6fe25818dfbaebd1bd90b870a6cac503fe1a24.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Disable wait argument registration as it'll be replaced with a more
generic feature. We'll still need IORING_ENTER_EXT_ARG_REG parsing
in a few commits so leave it be.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/70b1d1d218c41ba77a76d1789c8641dab0b0563e.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IOPOLL doesn't use the extended arguments, no need for it to support
IORING_ENTER_EXT_ARG_REG. Let's disable it for IOPOLL, if anything it
leaves more space for future extensions.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a35ecd919dbdc17bd5b7932273e317832c531b45.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're a bit too frivolous with types of nr_pages arguments, converting
it to long and back to int, passing an unsigned int pointer as an int
pointer and so on. Shouldn't cause any problem but should be carefully
reviewed, but until then let's add a WARN_ON_ONCE check to be more
confident callers don't pass poorely checked arguents.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d48e0c097cbd90fb47acaddb6c247596510d8cfc.1731689588.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use CLASS(fd) to get the file for sync message ring requests, rather
than open-code the file retrieval dance.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20241115034902.GP3387508@ZenIV
[axboe: make a more coherent commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For unbound workqueue, pwqs usually map to just a few pools. Most of
the time, pwqs will be linked sequentially to wq->pwqs list by cpu
index. Usually, consecutive CPUs have the same workqueue attribute
(e.g. belong to the same NUMA node). This makes pwqs with the same
pool cluster together in the pwq list.
Only do lock/unlock if the pool has changed in flush_workqueue_prep_pwqs().
This reduces the number of expensive lock operations.
The performance data shows this change boosts FIO by 65x in some cases
when multiple concurrent threads write to xfs mount points with fsync.
FIO Benchmark Details
- FIO version: v3.35
- FIO Options: ioengine=libaio,iodepth=64,norandommap=1,rw=write,
size=128M,bs=4k,fsync=1
- FIO Job Configs: 64 jobs in total writing to 4 mount points (ramdisks
formatted as xfs file system).
- Kernel Codebase: v6.12-rc5
- Test Platform: Xeon 8380 (2 sockets)
Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Wangyang Guo <wangyang.guo@intel.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
A previous commit changed how requests are linked in the plug structure,
but unlike the previous method, it uses a new type for it rather than
struct request. The latter is available even for !CONFIG_BLOCK, while
struct rq_list is now. Move it outside CONFIG_BLOCK.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: a3396b99990d ("block: add a rq_list type")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In cesa/cipher.c most declarations of struct mv_cesa_op_ctx are uninitialized.
This causes one of the values in the struct to be left unitialized in later
usages.
This patch fixes it by adding initializations in the same way it is done in
cesa/hash.c.
Fixes errors discovered in coverity: 1600942, 1600939, 1600935, 1600934, 1600929, 1600927,
1600925, 1600921, 1600920, 1600919, 1600915, 1600914
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If do_cpt_init() fails, a previous dma_alloc_coherent() call needs to be
undone.
Add the needed dma_free_coherent() before returning.
Fixes: 9e2c7d99941d ("crypto: cavium - Add Support for Octeon-tx CPT Engine")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch reverts commit 0fbafd06bdde938884f7326548d3df812b267c3c
("crypto: aesni - fix failing setkey for rfc4106-gcm-aesni") by
moving the aesni init function back to module_init from late_initcall.
The original patch was needed because tests were synchronous. This
is no longer the case so there is no need to postpone the registration.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This function is part of the exposed API and should be exported.
Otherwise a modular user would fail to build, e.g., crypto/rsa.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
A hwcap feature bit is passed to cpu_has_feature, resulting in testing
for CPU_FTR_MMCRA instead of the 3.1 platform revision.
Fixes: c954b252dee9 ("crypto: powerpc/p10-aes-gcm - Register modules as SIMD")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Commit 62f8f307c80e ("powerpc/64: Remove maple platform") removes the
PPC_MAPLE config as a consequence of the platform’s removal.
The config definition of HW_RANDOM_AMD refers to this removed config option
in its dependencies.
Remove the reference to the removed config option.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRC-T10DIF algorithm produces a 16-bit CRC, and this is reflected in
the folding coefficients, which are also only 16 bits wide.
This means that the polynomial multiplications involving these
coefficients can be performed using 8-bit long polynomial multiplication
(8x8 -> 16) in only a few steps, and this is an instruction that is part
of the base NEON ISA, which is all most real ARMv7 cores implement. (The
64-bit PMULL instruction is part of the crypto extensions, which are
only implemented by 64-bit cores)
The final reduction is a bit more involved, but we can delegate that to
the generic CRC-T10DIF implementation after folding the entire input
into a 16 byte vector.
This results in a speedup of around 6.6x on Cortex-A72 running in 32-bit
mode. On Cortex-A8 (BeagleBone White), the results are substantially
better than that, but not sufficiently reproducible (with tcrypt) to
quote a number here.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
To allow an alternative version to be created of the PMULL based
CRC-T10DIF algorithm, turn the bulk of it into a macro, except for the
final reduction, which will only be used by the existing version.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The only remaining user of the fallback implementation of 64x64
polynomial multiplication using 8x8 PMULL instructions is the final
reduction from a 16 byte vector to a 16-bit CRC.
The fallback code is complicated and messy, and this reduction has
little impact on the overall performance, so instead, let's calculate
the final CRC by passing the 16 byte vector to the generic CRC-T10DIF
implementation when running the fallback version.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The CRC-T10DIF implementation for arm64 has a version that uses 8x8
polynomial multiplication, for cores that lack the crypto extensions,
which cover the 64x64 polynomial multiplication instruction that the
algorithm was built around.
This fallback version rather naively adopted the 64x64 polynomial
multiplication algorithm that I ported from ARM for the GHASH driver,
which needs 8 PMULL8 instructions to implement one PMULL64. This is
reasonable, given that each 8-bit vector element needs to be multiplied
with each element in the other vector, producing 8 vectors with partial
results that need to be combined to yield the correct result.
However, most PMULL64 invocations in the CRC-T10DIF code involve
multiplication by a pair of 16-bit folding coefficients, and so all the
partial results from higher order bytes will be zero, and there is no
need to calculate them to begin with.
Then, the CRC-T10DIF algorithm always XORs the output values of the
PMULL64 instructions being issued in pairs, and so there is no need to
faithfully implement each individual PMULL64 instruction, as long as
XORing the results pairwise produces the expected result.
Implementing these improvements results in a speedup of 3.3x on low-end
platforms such as Raspberry Pi 4 (Cortex-A72)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is a partial revert of commit fc754c024a343b, which moved the logic
into C code which ensures that kernel mode NEON code does not hog the
CPU for too long.
This is no longer needed now that kernel mode NEON no longer disables
preemption, so we can drop this.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The caam_rsa_set_priv_key_form did not check for memory allocation errors.
Add the checks to the caam_rsa_set_priv_key_form functions.
Fixes: 52e26d77b8b3 ("crypto: caam - add support for RSA key form 2")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Syzbot has reported the following BUG:
kernel BUG at fs/ocfs2/uptodate.c:509!
...
Call Trace:
<TASK>
? __die_body+0x5f/0xb0
? die+0x9e/0xc0
? do_trap+0x15a/0x3a0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? do_error_trap+0x1dc/0x2c0
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? __pfx_do_error_trap+0x10/0x10
? handle_invalid_op+0x34/0x40
? ocfs2_set_new_buffer_uptodate+0x145/0x160
? exc_invalid_op+0x38/0x50
? asm_exc_invalid_op+0x1a/0x20
? ocfs2_set_new_buffer_uptodate+0x2e/0x160
? ocfs2_set_new_buffer_uptodate+0x144/0x160
? ocfs2_set_new_buffer_uptodate+0x145/0x160
ocfs2_group_add+0x39f/0x15a0
? __pfx_ocfs2_group_add+0x10/0x10
? __pfx_lock_acquire+0x10/0x10
? mnt_get_write_access+0x68/0x2b0
? __pfx_lock_release+0x10/0x10
? rcu_read_lock_any_held+0xb7/0x160
? __pfx_rcu_read_lock_any_held+0x10/0x10
? smack_log+0x123/0x540
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x68/0x2b0
? mnt_get_write_access+0x226/0x2b0
ocfs2_ioctl+0x65e/0x7d0
? __pfx_ocfs2_ioctl+0x10/0x10
? smack_file_ioctl+0x29e/0x3a0
? __pfx_smack_file_ioctl+0x10/0x10
? lockdep_hardirqs_on_prepare+0x43d/0x780
? __pfx_lockdep_hardirqs_on_prepare+0x10/0x10
? __pfx_ocfs2_ioctl+0x10/0x10
__se_sys_ioctl+0xfb/0x170
do_syscall_64+0xf3/0x230
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
When 'ioctl(OCFS2_IOC_GROUP_ADD, ...)' has failed for the particular
inode in 'ocfs2_verify_group_and_input()', corresponding buffer head
remains cached and subsequent call to the same 'ioctl()' for the same
inode issues the BUG() in 'ocfs2_set_new_buffer_uptodate()' (trying
to cache the same buffer head of that inode). Fix this by uncaching
the buffer head with 'ocfs2_remove_from_cache()' on error path in
'ocfs2_group_add()'.
Link: https://lkml.kernel.org/r/20241114043844.111847-1-dmantipov@yandex.ru
Fixes: 7909f2bf8353 ("[PATCH 2/2] ocfs2: Implement group add for online resize")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reported-by: syzbot+453873f1588c2d75b447@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=453873f1588c2d75b447
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We triggered a NULL pointer dereference for ac.preferred_zoneref->zone in
alloc_pages_bulk_noprof() when the task is migrated between cpusets.
When cpuset is enabled, in prepare_alloc_pages(), ac->nodemask may be
¤t->mems_allowed. when first_zones_zonelist() is called to find
preferred_zoneref, the ac->nodemask may be modified concurrently if the
task is migrated between different cpusets. Assuming we have 2 NUMA Node,
when traversing Node1 in ac->zonelist, the nodemask is 2, and when
traversing Node2 in ac->zonelist, the nodemask is 1. As a result, the
ac->preferred_zoneref points to NULL zone.
In alloc_pages_bulk_noprof(), for_each_zone_zonelist_nodemask() finds a
allowable zone and calls zonelist_node_idx(ac.preferred_zoneref), leading
to NULL pointer dereference.
__alloc_pages_noprof() fixes this issue by checking NULL pointer in commit
ea57485af8f4 ("mm, page_alloc: fix check for NULL preferred_zone") and
commit df76cee6bbeb ("mm, page_alloc: remove redundant checks from alloc
fastpath").
To fix it, check NULL pointer for preferred_zoneref->zone.
Link: https://lkml.kernel.org/r/20241113083235.166798-1-tujinjiang@huawei.com
Fixes: 387ba26fb1cb ("mm/page_alloc: add a bulk page allocator")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MADV_HUGEPAGE is a new addition to readahead with behavior distinct from
normal pages. To prevent confusion, we should update the documentation
accordingly.
Link: https://lkml.kernel.org/r/20241113150711.1685-1-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The "arg->vec_len" variable is a u64 that comes from the user at the start
of the function. The "arg->vec_len * sizeof(struct page_region))"
multiplication can lead to integer wrapping. Use size_mul() to avoid
that.
Also the size_add/mul() functions work on unsigned long so for 32bit
systems we need to ensure that "arg->vec_len" fits in an unsigned long.
Link: https://lkml.kernel.org/r/39d41335-dd4d-48ed-8a7f-402c57d8ea84@stanley.mountain
Fixes: 52526ca7fdb9 ("fs/proc/task_mmu: implement IOCTL to get and optionally clear info about PTEs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When CONFIG_KASAN_SW_TAGS and CONFIG_KASAN_STACK are enabled, the
object_is_on_stack() function may produce incorrect results due to the
presence of tags in the obj pointer, while the stack pointer does not have
tags. This discrepancy can lead to incorrect stack object detection and
subsequently trigger warnings if CONFIG_DEBUG_OBJECTS is also enabled.
Example of the warning:
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at lib/debugobjects.c:557 __debug_object_init+0x330/0x364
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-rc5 #4
Hardware name: linux,dummy-virt (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __debug_object_init+0x330/0x364
lr : __debug_object_init+0x330/0x364
sp : ffff800082ea7b40
x29: ffff800082ea7b40 x28: 98ff0000c0164518 x27: 98ff0000c0164534
x26: ffff800082d93ec8 x25: 0000000000000001 x24: 1cff0000c00172a0
x23: 0000000000000000 x22: ffff800082d93ed0 x21: ffff800081a24418
x20: 3eff800082ea7bb0 x19: efff800000000000 x18: 0000000000000000
x17: 00000000000000ff x16: 0000000000000047 x15: 206b63617473206e
x14: 0000000000000018 x13: ffff800082ea7780 x12: 0ffff800082ea78e
x11: 0ffff800082ea790 x10: 0ffff800082ea79d x9 : 34d77febe173e800
x8 : 34d77febe173e800 x7 : 0000000000000001 x6 : 0000000000000001
x5 : feff800082ea74b8 x4 : ffff800082870a90 x3 : ffff80008018d3c4
x2 : 0000000000000001 x1 : ffff800082858810 x0 : 0000000000000050
Call trace:
__debug_object_init+0x330/0x364
debug_object_init_on_stack+0x30/0x3c
schedule_hrtimeout_range_clock+0xac/0x26c
schedule_hrtimeout+0x1c/0x30
wait_task_inactive+0x1d4/0x25c
kthread_bind_mask+0x28/0x98
init_rescuer+0x1e8/0x280
workqueue_init+0x1a0/0x3cc
kernel_init_freeable+0x118/0x200
kernel_init+0x28/0x1f0
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ODEBUG: object 3eff800082ea7bb0 is NOT on stack ffff800082ea0000, but annotated.
------------[ cut here ]------------
Link: https://lkml.kernel.org/r/20241113042544.19095-1-qun-wei.lin@mediatek.com
Signed-off-by: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Cc: Andrew Yang <andrew.yang@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Casper Li <casper.li@mediatek.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fixes boot failures on 6.9 on PPC_BOOK3S_32 machines using Open Firmware.
On these machines, the kernel refuses to boot from non-zero
PHYSICAL_START, which occurs when CRASH_DUMP is on.
Since most PPC_BOOK3S_32 machines boot via Open Firmware, it should
default to off for them. Users booting via some other mechanism can still
turn it on explicitly.
Does not change the default on any other architectures for the
time being.
Link: https://lkml.kernel.org/r/20240917163720.1644584-1-dave@vasilevsky.ca
Fixes: 75bc255a7444 ("crash: clean up kdump related config items")
Signed-off-by: Dave Vasilevsky <dave@vasilevsky.ca>
Reported-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Closes: https://lists.debian.org/debian-powerpc/2024/07/msg00001.html
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On 32-bit platforms, it is possible for the expression `len + old_addr <
old_end` to be false-positive if `len + old_addr` wraps around.
`old_addr` is the cursor in the old range up to which page table entries
have been moved; so if the operation succeeded, `old_addr` is the *end* of
the old region, and adding `len` to it can wrap.
The overflow causes mremap() to mistakenly believe that PTEs have been
copied; the consequence is that mremap() bails out, but doesn't move the
PTEs back before the new VMA is unmapped, causing anonymous pages in the
region to be lost. So basically if userspace tries to mremap() a
private-anon region and hits this bug, mremap() will return an error and
the private-anon region's contents appear to have been zeroed.
The idea of this check is that `old_end - len` is the original start
address, and writing the check that way also makes it easier to read; so
fix the check by rearranging the comparison accordingly.
(An alternate fix would be to refactor this function by introducing an
"orig_old_start" variable or such.)
Tested in a VM with a 32-bit X86 kernel; without the patch:
```
user@horn:~/big_mremap$ cat test.c
#define _GNU_SOURCE
#include <stdlib.h>
#include <stdio.h>
#include <err.h>
#include <sys/mman.h>
#define ADDR1 ((void*)0x60000000)
#define ADDR2 ((void*)0x10000000)
#define SIZE 0x50000000uL
int main(void) {
unsigned char *p1 = mmap(ADDR1, SIZE, PROT_READ|PROT_WRITE,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0);
if (p1 == MAP_FAILED)
err(1, "mmap 1");
unsigned char *p2 = mmap(ADDR2, SIZE, PROT_NONE,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED_NOREPLACE, -1, 0);
if (p2 == MAP_FAILED)
err(1, "mmap 2");
*p1 = 0x41;
printf("first char is 0x%02hhx\n", *p1);
unsigned char *p3 = mremap(p1, SIZE, SIZE,
MREMAP_MAYMOVE|MREMAP_FIXED, p2);
if (p3 == MAP_FAILED) {
printf("mremap() failed; first char is 0x%02hhx\n", *p1);
} else {
printf("mremap() succeeded; first char is 0x%02hhx\n", *p3);
}
}
user@horn:~/big_mremap$ gcc -static -o test test.c
user@horn:~/big_mremap$ setarch -R ./test
first char is 0x41
mremap() failed; first char is 0x00
```
With the patch:
```
user@horn:~/big_mremap$ setarch -R ./test
first char is 0x41
mremap() succeeded; first char is 0x41
```
Link: https://lkml.kernel.org/r/20241111-fix-mremap-32bit-wrap-v1-1-61d6be73b722@google.com
Fixes: af8ca1c14906 ("mm/mremap: optimize the start addresses in move_page_tables()")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a missing semicolon.
Link: https://lkml.kernel.org/r/20241112171655.1662670-1-motiejus@jakstys.lt
Fixes: ece5897e5a10 ("tools/mm: -Werror fixes in page-types/slabinfo")
Signed-off-by: Motiejus JakÅ`tys <motiejus@jakstys.lt>
Closes: https://github.com/NixOS/nixpkgs/issues/355369
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Acked-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: Wladislav Wiebe <wladislav.kw@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
scx_next_task_picked() has been replaced with siwtch_class(), but comment
is still referencing old one, so replace it.
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Dan reported that after the rework the newly introduced
scf_add_to_free_list() may get a NULL pointer passed. This replaced
kfree() which was fine with a NULL pointer but scf_add_to_free_list()
isn't.
Let scf_add_to_free_list() handle NULL pointer.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/2375aa2c-3248-4ffa-b9b0-f0a24c50f237@stanley.mountain
Fixes: 4788c861ad7e9 ("scftorture: Use a lock-less list to free memory.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
There are two flags used to synchronize allocation and scanning with
swapoff: SWP_WRITEOK and SWP_SCANNING.
SWP_WRITEOK: Swapoff will first unset this flag, at this point any further
swap allocation or scanning on this device should just abort so no more
new entries will be referencing this device. Swapoff will then unuse all
existing swap entries.
SWP_SCANNING: This flag is set when device is being scanned. Swapoff will
wait for all scanner to stop before the final release of the swap device
structures to avoid UAF. Note this flag is the highest used bit of
si->flags so it could be added up arithmetically, if there are multiple
scanner.
commit 5f843a9a3a1e ("mm: swap: separate SSD allocation from
scan_swap_map_slots()") ignored SWP_SCANNING and SWP_WRITEOK flags while
separating cluster allocation path from the old allocation path. Add the
flags back to fix swapoff race. The race is hard to trigger as si->lock
prevents most parallel operations, but si->lock could be dropped for
reclaim or discard. This issue is found during code review.
This commit fixes this problem. For SWP_SCANNING, Just like before, set
the flag before scan and remove it afterwards.
For SWP_WRITEOK, there are several places where si->lock could be dropped,
it will be error-prone and make the code hard to follow if we try to cover
these places one by one. So just do one check before the real allocation,
which is also very similar like before. With new cluster allocator it may
waste a bit of time iterating the clusters but won't take long, and
swapoff is not performance sensitive.
Link: https://lkml.kernel.org/r/20241112083414.78174-1-ryncsn@gmail.com
Fixes: 5f843a9a3a1e ("mm: swap: separate SSD allocation from scan_swap_map_slots()")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/linux-mm/87a5es3f1f.fsf@yhuang6-desk2.ccr.corp.intel.com/
Signed-off-by: Kairui Song <kasong@tencent.com>
Cc: Barry Song <v-songbaohua@oppo.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ops.cpu_acquire() is currently called with 0 kf_maks which is interpreted as
SCX_KF_UNLOCKED which allows all unlocked kfuncs, but ops.cpu_acquire() is
called from balance_one() under the rq lock and should only be allowed call
kfuncs that are safe under the rq lock. Update it to use SCX_KF_REST.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Zhao Mengmeng <zhaomzhao@126.com>
Link: http://lkml.kernel.org/r/ZzYvf2L3rlmjuKzh@slm.duckdns.org
Fixes: 245254f7081d ("sched_ext: Implement sched_ext_ops.cpu_acquire/release()")
|
|
With some recent proposed changes [1] in the deadline server code,
it has caused a test failure in test_cpuset_prs.sh when a change
is being made to an isolated partition. This is due to failing
the cpuset_cpumask_can_shrink() check for SCHED_DEADLINE tasks at
validate_change().
This is actually a false positive as the failed test case involves an
isolated partition with load balancing disabled. The deadline check
is not meaningful in this case and the users should know what they
are doing.
Fix this by doing the cpuset_cpumask_can_shrink() check only when loading
balanced is enabled. Also change its arguments to use effective_cpus
for the current cpuset and user_xcpus() as an approiximation for the
target effective_cpus as the real effective_cpus hasn't been fully
computed yet as this early stage.
As the check isn't comprehensive, there may be false positives or
negatives. We may have to revise the code to do a more thorough check
in the future if this becomes a concern.
[1] https://lore.kernel.org/lkml/82be06c1-6d6d-4651-86c9-bcc828cbcb80@redhat.com/T/#t
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
