summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sun7i-a20-cubietruck.dts (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: sunxi: Add mdio bus sub-node to GMACChen-Yu Tsai2019-08-231-4/+6
| | | | | | | | | | | | | | | | | | | | | | The DWMAC binding never supported having the Ethernet PHY node as a direct child to the controller, nor did it support the "phy" property as a way to specify which Ethernet PHY to use. What seemed to work was simply the implementation ignoring the "phy" property and instead probing all addresses on the MDIO bus and using the first available one. The recent switch from "phy" to "phy-handle" breaks the assumptions of the implementation, and does not match what the binding requires. The binding requires that if an MDIO bus is described, it shall be a sub-node with the "snps,dwmac-mdio" compatible string. Add a device node for the MDIO bus, and move the Ethernet PHY node under it. Also fix up the #address-cells and #size-cells properties where needed. Fixes: de332de26d19 ("ARM: dts: sunxi: Switch from phy to phy-handle") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: dts: sunxi: Switch from phy to phy-handleMaxime Ripard2019-07-221-1/+1
| | | | | | | | The phy device tree property has been deprecated in favor of phy-handle, let's replace it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boardsChen-Yu Tsai2018-12-191-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the Bluetooth node, and the underlying UART node if it's missing, to the board device tree file for several boards. The LPO clock is also added to the WiFi side's power sequencing node if it's missing, to correctly represent the shared connections. There is also a PCM connection for Bluetooth, but this is not covered in this patch. These boards all have a WiFi+BT module from AMPAK, which contains one or two Broadcom chips, depending on the model. The older AP6210 contains two, while the newer AP6212 and AP6330 contain just one, as they use two-in-one combo chips. The Bluetooth side of the module is always connected to a UART on the same pingroup as the SDIO pins for the WiFi side, in a 4 wire configuration. Power to the VBAT and VDDIO pins are provided either by the PMIC, using one or several of its regulator outputs, or other fixed regulators on the board. The VBAT and VDDIO pins are shared with the WiFi side, which would correspond to vmmc-supply and vqmmc-supply in the mmc host node. A clock output from the SoC or the external X-Powers RTC provides the LPO low power clock at 32.768 kHz. All the boards covered in this patch are ones that do not require extra changes to the SoC's dtsi file. For the remaining boards that I have worked on, properties or device nodes for the LPO clock's source are missing. For the Cubietruck, the LPO clock is fed from CLK_OUT_A, which needs to be muxed on pin PI12. This can be represented in multiple ways. This patch puts the pinctrl property in the pin controller node. This is due to limitations in Linux, where pinmux settings, even the same one, can not be shared by multiple devices. Thus we cannot put it in both the WiFi and Bluetooth device nodes. Putting it the CCU node is another option, but Linux's CCU driver does not handle pinctrl. Also the pin controller is guaranteed to be initialized after the CCU, when clocks are available. And any other devices that use muxed pins are guaranteed to be initialized after the pin controller. Thus having the CLK_OUT_A pinmux reference be in the pin controller node is a good choice without having to deal with implementation issues. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Remove redundant MMC pinmux tuningMaxime Ripard2018-11-281-5/+0
| | | | | | | | | | | | Some boards override the MMC pin muxing settings in order to enable the pull-ups and change the drive strength to a value higher than the default. While this was needed in the earlier days, this is now the default setting for those pins, and therefore we don't need those board-specific settings anymore. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Provide default muxing for relevant controllersMaxime Ripard2018-11-281-9/+0
| | | | | | | | | The I2C and MMC controllers have only one muxing option in the SoC. In such a case, we can just move the muxing into the DTSI, and remove it from the DTS. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Change pinctrl nodes to avoid warningMaxime Ripard2018-11-281-11/+11
| | | | | | | | | | | | | All our pinctrl nodes were using a node name convention with a unit-address to differentiate the different muxing options. However, since those nodes didn't have a reg property, they were generating warnings in DTC. In order to accomodate for this, convert the old nodes to the syntax we've been using for the new SoCs, including removing the letter suffix of the node labels to the bank of those pins to make things more readable. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Remove all useless pinctrl nodesMaxime Ripard2018-11-281-40/+0
| | | | | | | | | The gpio pinctrl nodes are redundant and as such useless most of the times. Since they will also generate warnings in DTC, we can simply remove most of them. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sunxi: Switch MMC nodes away from cd-inverted propertyTuomas Tynkkynen2018-02-131-2/+1
| | | | | | | | | | Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted. Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
* ARM: dts: sun7i: Enable HDMI support on some A20 devicesChen-Yu Tsai2017-10-181-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | All the A20 devices I own have standard HDMI connectors wired to the dedicated HDMI pins on the SoC: - Bananapi M1+ - Cubieboard 2 - Cubietruck - Lamobo R1 (or Bananapi R1) Development boards from Olimex also have standard HDMI connectors. Schematics for them are publicly available. Enable HDMI on them as well. - Olimex A20-OLinuXino-LIME - Olimex A20-OLinuXino-LIME2 - Olimex A20-OLinuXino-MICRO Enable the display pipeline and HDMI output for them. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Priit Laes <plaes@plaes.org> # Cubietruck, A20-OLinuXino-MICRO Tested-by: Olliver Schinagl <oliver@schinagl.nl> # A20-OLinuXino-LIME2 Tested-by: Jonathan Liu <net147@gmail.com> # A20-OLinuXino-LIME Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: enable battery power supply subnode on cubietruckAlexander Syring2017-08-051-0/+4
| | | | | | | | | | | The Cubietruck has an AXP209 PMIC with battery connector. This enables the battery power supply subnode. Signed-off-by: Alexander Syring <alex@asyring.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: Correct subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
* ARM: sun7i: a20: cubietruck: Tie AXP209's USB power supply to USB PHYChen-Yu Tsai2017-05-291-0/+1
| | | | | | | | | | | | The USB PHY can use either a GPIO pin or the PMIC's USB power supply to sense VBUS. Since both options are available on the Cubietruck, add the missing property for the USB power supply to the USB PHY node. The device tree provides all usable options. Ultimately, which method is used is up to the driver implementation. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sunxi: Fix BCM43xx node nameFabio Estevam2017-05-221-1/+1
| | | | | | | | | | "bcrmf" is a typo and "wifi" is the preferred form to describe such node, so change it accordingly. Reported-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Drop mmc0_cd_pin_reference_design pinmux settingChen-Yu Tsai2017-05-141-1/+1
| | | | | | | | | | As part of our effort to move pinctrl/GPIO interlocking into the driver where it belongs, this patch drops the definition and usage of the mmc0_cd_pin_reference_design pinmux setting for the default mmc0 card detect GPIO pin. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: cubietruck: enable ACIN und USB power supply subnodeAlexander Syring2017-04-031-0/+8
| | | | | | | | | | The Cubietruck has an AXP209 PMIC and can be power-supplied by ACIN via the CHG-IN pin or by USB. This enables the ACIN and the USB power supply subnode in the DT. Signed-off-by: Alexander Syring <alex@asyring.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sunxi: Remove no longer used pinctrl/sun4i-a10.h headerChen-Yu Tsai2017-03-271-1/+0
| | | | | | | | | | | | | | | | | All dts files for the sunxi platform have been switched to the generic pinconf bindings. As a result, the sunxi specific pinctrl macros are no longer used. Remove the #include entry with the following command: sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \ arch/arm/boot/dts/sun?i*.* arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra empty line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Convert pinctrl nodes to generic bindingsMaxime Ripard2016-12-261-13/+13
| | | | | | | | Now that we can handle the generic pinctrl bindings, convert our DT to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: sunxi: Remove useless allwinner,pull propertyMaxime Ripard2016-12-261-6/+0
| | | | | | | | | | | | The allwinner,pull property set to NO_PULL was really considered our default (and wasn't even changing the default value in the code). Remove these properties to make it obvious that we do not set anything in such a case. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: sunxi: Remove useless allwinner,drive propertyMaxime Ripard2016-12-261-6/+0
| | | | | | | | | The allwinner,drive property set to 10mA was really considered as our default. Remove all those properties entirely to make that obvious. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: dts: sun7i: Enable S/PDIF on the CubietruckChristopher Spinrath2016-04-251-0/+24
| | | | | | | Enable the S/PDIF transmitter present on the Cubietruck. Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: dt: enable audio codec on CubietruckEmilio López2015-10-221-0/+4
| | | | | | | | | | This commit enables the on-chip audio codec present on the A20 SoC for the Cubietruck. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
* ARM: dts: sun7i: Change cubietruck wifi enable pin to use mmc-pwrseqHans de Goede2015-08-011-15/+12
| | | | | | | | | | The wifi-enable pin of the ap6210 module is not really a regulator, switch to the mmc-pwrseq framework for controlling it. This more accurately reflects how the hardware actually works. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [maxime: Changed the name of the pinctrl node and re-ordered it] Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dt: Convert users to the PIO interrupts bindingMaxime Ripard2015-07-281-1/+1
| | | | | | | | | | | | | | | | | | | The current DTs were setting the cell size to 2, but used the default xlate function that was assuming an interrupt cell size of 1, leading to the second part of the cell (the flags) being ignored, while we were having an inconsistent binding between the interrupts and gpio (that could also be used as interrupts). That "binding" doesn't work either with newer SoCs that have multiple irq banks. Now that we fixed the pinctrl driver to handle this like it should always have been handled, convert the DT users, and while we're at it, remove the size-cells property of PIO that is completely useless. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* ARM: dts: sun7i: Enable USB DRC on CubietruckRoman Byshko2015-07-061-0/+27
| | | | | | | Enable the otg/drc usb controller on the cubietruck. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dt: Remove the FSF addressMaxime Ripard2015-05-101-5/+0
| | | | | | | | | | The FSF address triggers a warning on checkpatch, saying that the FSF license is already present in the Linux source code, and that it has already changed in the past. Remove it from our DT, as suggested. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dts: split IR pins for A10 and A20Marcus Cooper2015-05-021-1/+1
| | | | | | | | | | Currently none of the target boards nor the driver supports IR TX. However this pin is used in a few instances as a GPIO. Split the pin ctrl descriptions so that only the IR RX is configured to be used. Signed-off-by: Marcus Cooper <codekipper@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: Add stdout-path propertyMaxime Ripard2015-04-271-0/+8
| | | | | | | | | | | | Add UART aliases and stdout-path property for all the Allwinner boards so that we won't have to rely on the bootargs' console= value, while working with legacy bootloaders. While we're at it, also remove the mentions of earlyprintk in the bootargs, that will remove our default bootargs entirely, and allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add OOB irq support to boards with broadcom sdio wifiHans de Goede2015-04-271-0/+8
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: cubietruck: Convert to DT label based syntaxMaxime Ripard2015-04-271-159/+157
| | | | | | | | In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: cubietruck: Relicense the device tree under GPLv2/X11Maxime Ripard2015-01-211-5/+41
| | | | | | | | | | | | | | | | The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Alexander Bersenev <bay@hackerdom.ru> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Carlo Caione <carlo@caione.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Olliver Schinagl <oliver@schinagl.nl>
* ARM: dts: sun7i: cubietruck: add axp209 regulator nodesChen-Yu Tsai2015-01-211-4/+31
| | | | | | | | | | | | | | | | | | | This patch adds the regulator nodes for the axp209 by including the axp209 dtsi. As the inputs of these regulators are from the axp209's PS output, which is basically just a mux over the 2 inputs, it is considered to be unregulated. Thus we do not provide input supply properties for them. The regulator names and constraints are based on the board schematics and the SoC datasheet. DCDC2 is used as the cpu power supply. This patch also references it from the cpu node. Also get rid of axp209 properties already set in axp209.dtsi. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: Convert the DTs to use the generic interrupt headerMaxime Ripard2015-01-211-1/+2
| | | | | | | | | The NMI IRQ controller uses the standard flags definition for the IRQ level and edges. Use the common header to use defines instead of opaque numbers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard2015-01-211-9/+10
| | | | | | | | | | The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard2015-01-211-8/+10
| | | | | | | Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: DT: Convert to device tree includesMaxime Ripard2015-01-211-2/+2
| | | | | | Prepare the device trees to use the C preprocessor. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Cubietruck: add power supply regulator for USB OTG VBUSRoman Byshko2014-11-121-0/+1
| | | | | Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Cubietruck: override regulator pinRoman Byshko2014-11-121-0/+13
| | | | | | | | Cubietruck uses different pin for the USB OTG VBUS that is why we override the one defined in sunxi-common-regulators.dtsi Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add AXP209 support to various boardsCarlo Caione2014-07-011-0/+10
| | | | | | | | | | | | | | | At a node for the axp209, and where necessary the i2c controller to the dts for various boards. Note the axp209 regulators are omitted as we don't have any use for them yet, and on some boards were not sure how exactly they are wired up. Adding support for just the axp209 without the regulators is still useful, as it will give us power-button and poweroff support. Signed-off-by: Carlo Caione <carlo@caione.org> [hdegoede@redhat.com: Drop the regulator bits for now] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: Enable IR controller on cubieboard 2 and cubietruck in dtsAlexander Bersenev2014-06-161-0/+6
| | | | | | | | | | This patch enables two IR devices in dts: - One IR device physically found on Cubieboard 2 - One IR device physically found on Cubietruck Signed-off-by: Alexander Bersenev <bay@hackerdom.ru> Signed-off-by: Alexsey Shestacov <wingrime@linux-sunxi.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: cubietruck: set mmc3 bus-width propertyHans de Goede2014-05-221-0/+1
| | | | | | | | bus-width defaults to 1, and all 4 lines are hooked up at the cubietruck, properly set bus-width to 4. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodesHans de Goede2014-05-111-0/+1
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Add basic support for the Cubietruck WiFi moduleChen-Yu Tsai2014-05-061-0/+31
| | | | | | | | | | | | | The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO. The IC also takes a power enable signal via GPIO. The WiFi module supports out-of-band interrupt signaling via GPIO, but this is not supported in this patch. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: Enable mmc controller on various A20 boardsHans de Goede2014-05-051-0/+9
| | | | | | | | The cd pin settings have been taken from the original firmware fex files, and have been confirmed to work on the actual boards. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dt: add PWM support for the cubietruckAlexandre Belloni2014-04-281-0/+6
| | | | | | | | Enable the PWM for both PWM channels on the cubietruck. They can be found on connector CN8. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: dt: Add USB host nodes to cubietruck dtsHans de Goede2014-03-041-0/+30
| | | | | | | Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sun7i: dt: Add ahci / sata supportHans de Goede2014-03-041-0/+19
| | | | | | | | | | This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: dts: sun7i: cubietruck: Enable the GMACChen-Yu Tsai2014-02-101-0/+12
| | | | | | | The CubieTruck uses the GMAC with an RGMII phy. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* arm: sun7i: cubietruck: Enable the i2c controllersChen-Yu Tsai2014-01-071-0/+18
| | | | | | | | | | The Cubietruck makes use of the first three i2c controllers found on the Allwinner A20; i2c-0 is used internally for the PMIC, i2c-1 is exposed on the board headers, and i2c-2 is used for DDC on the VGA connector. This patch enables them in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruckOliver Schinagl2013-10-081-0/+63
Cubietech introduced a new cubieboard, the CubieTruck. This board added more output connectors and features 2 GiB of RAM and a Gigabit PHY. Tested are are uart0 and LEDS which both work as expected. Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-20 12:28:42 +0100