| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Sanitize user pointer given to __copy_to_user, both for standard version
and memcopy version of the user accessor.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Introduce C and asm helpers to sanitize user address, taking the
address range they target into account.
Use asm helper for existing sanitization in __copy_from_user().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When Spectre mitigation is required, __put_user() needs to include
check_uaccess. This is already the case for put_user(), so just make
__put_user() an alias of put_user().
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
A mispredicted conditional call to set_fs could result in the wrong
addr_limit being forwarded under speculation to a subsequent access_ok
check, potentially forming part of a spectre-v1 attack using uaccess
routines.
This patch prevents this forwarding from taking place, but putting heavy
barriers in set_fs after writing the addr_limit.
Porting commit c2f0ad4fc089cff8 ("arm64: uaccess: Prevent speculative use
of the current addr_limit").
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
With Spectre-v1.1 mitigations, __put_user_error is pointless. In an attempt
to remove it, replace its references in frame setups with __put_user.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Copy events to user using __copy_to_user() rather than copy members of
individually with __put_user_error().
This has the benefit of disabling/enabling PAN once per event intead of
once per event member.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Use __copy_to_user() rather than __put_user_error() for individual
members when saving VFP state.
This has the benefit of disabling/enabling PAN once per copied struct
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When setting a dummy iwmmxt context, create a local instance and
use __copy_to_user both cases whether iwmmxt is being used or not.
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
When saving the ARM integer registers, use __copy_to_user() to
copy them into user signal frame, rather than __put_user_error().
This has the benefit of disabling/enabling PAN once for the whole copy
intead of once per write.
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Spectre variant 1 attacks are about this sequence of pseudo-code:
index = load(user-manipulated pointer);
access(base + index * stride);
In order for the cache side-channel to work, the access() must me made
to memory which userspace can detect whether cache lines have been
loaded. On 32-bit ARM, this must be either user accessible memory, or
a kernel mapping of that same user accessible memory.
The problem occurs when the load() speculatively loads privileged data,
and the subsequent access() is made to user accessible memory.
Any load() which makes use of a user-maniplated pointer is a potential
problem if the data it has loaded is used in a subsequent access. This
also applies for the access() if the data loaded by that access is used
by a subsequent access.
Harden the get_user() accessors against Spectre attacks by forcing out
of bounds addresses to a NULL pointer. This prevents get_user() being
used as the load() step above. As a side effect, put_user() will also
be affected even though it isn't implicated.
Also harden copy_from_user() by redoing the bounds check within the
arm_copy_from_user() code, and NULLing the pointer if out of bounds.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Fixing __get_user() for spectre variant 1 is not sane: we would have to
add address space bounds checking in order to validate that the location
should be accessed, and then zero the address if found to be invalid.
Since __get_user() is supposed to avoid the bounds check, and this is
exactly what get_user() does, there's no point having two different
implementations that are doing the same thing. So, when the Spectre
workarounds are required, make __get_user() an alias of get_user().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Borrow the x86 implementation of __inttype() to use in get_user() to
select an integer type suitable to temporarily hold the result value.
This is necessary to avoid propagating the volatile nature of the
result argument, which can cause the following warning:
lib/iov_iter.c:413:5: warning: optimization may eliminate reads and/or writes to register variables [-Wvolatile-register-var]
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
__get_user_error() is used as a fast accessor to make copying structure
members as efficient as possible. However, with software PAN and the
recent Spectre variant 1, the efficiency is reduced as these are no
longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
Rather than using __get_user_error() to copy each semops element member,
copy each semops element in full using __copy_from_user().
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible. However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
Use __copy_from_user() rather than __get_user_err() for individual
members when restoring VFP state.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
__get_user_error() is used as a fast accessor to make copying structure
members in the signal handling path as efficient as possible. However,
with software PAN and the recent Spectre variant 1, the efficiency is
reduced as these are no longer fast accessors.
In the case of software PAN, it has to switch the domain register around
each access, and with Spectre variant 1, it would have to repeat the
access_ok() check for each access.
It becomes much more efficient to use __copy_from_user() instead, so
let's use this for the ARM integer registers.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Prevent speculation at the syscall table decoding by clamping the index
used to zero on invalid system call numbers, and using the csdb
speculative barrier.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
Add an implementation of the array_index_mask_nospec() function for
mitigating Spectre variant 1 throughout the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
Add assembly and C macros for the new CSDB instruction.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
Report support for SMCCC_ARCH_WORKAROUND_1 to KVM guests for affected
CPUs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible.
So let's intercept it as early as we can by testing for the
function call number as soon as we've identified a HVC call
coming from the guest.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Include Brahma B15 in the Spectre v2 KVM workarounds.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
In order to avoid aliasing attacks against the branch predictor
on Cortex-A15, let's invalidate the BTB on guest exit, which can
only be done by invalidating the icache (with ACTLR[0] being set).
We use the same hack as for A12/A17 to perform the vector decoding.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
In order to avoid aliasing attacks against the branch predictor,
let's invalidate the BTB on guest exit. This is made complicated
by the fact that we cannot take a branch before invalidating the
BTB.
We only apply this to A12 and A17, which are the only two ARM
cores on which this useful.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
Warn at error level if the context switching function is not what we
are expecting. This can happen with big.Little systems, which we
currently do not support.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add firmware based hardening for cores that require more complex
handling in firmware.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
In order to prevent aliasing attacks on the branch predictor,
invalidate the BTB or instruction cache on CPUs that are known to be
affected when taking an abort on a address that is outside of a user
task limit:
Cortex A8, A9, A12, A17, A73, A75: flush BTB.
Cortex A15, Brahma B15: invalidate icache.
If the IBE bit is not set, then there is little point to enabling the
workaround.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
When the branch predictor hardening is enabled, firmware must have set
the IBE bit in the auxiliary control register. If this bit has not
been set, the Spectre workarounds will not be functional.
Add validation that this bit is set, and print a warning at alert level
if this is not the case.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
|
|
Harden the branch predictor against Spectre v2 attacks on context
switches for ARMv7 and later CPUs. We do this by:
Cortex A9, A12, A17, A73, A75: invalidating the BTB.
Cortex A15, Brahma B15: invalidating the instruction cache.
Cortex A57 and Cortex A72 are not addressed in this patch.
Cortex R7 and Cortex R8 are also not addressed as we do not enforce
memory protection on these cores.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add a Kconfig symbol for CPUs which are vulnerable to the Spectre
attacks.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add support for per-processor bug checking - each processor function
descriptor gains a function pointer for this check, which must not be
an __init function. If non-NULL, this will be called whenever a CPU
enters the kernel via which ever path (boot CPU, secondary CPU startup,
CPU resuming, etc.)
This allows processor specific bug checks to validate that workaround
bits are properly enabled by firmware via all entry paths to the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Check for CPU bugs when secondary processors are being brought online,
and also when CPUs are resuming from a low power mode. This gives an
opportunity to check that processor specific bug workarounds are
correctly enabled for all paths that a CPU re-enters the kernel.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Prepare the processor bug infrastructure so that it can be expanded to
check for per-processor bugs.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Add CPU part numbers for Cortex A53, A57, A72, A73, A75 and the
Broadcom Brahma B15 CPU.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Boot-tested-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
|
|
In mvneta_port_up() we enable relevant RX and TX port queues by write
queues bit map to an appropriate register.
q_map must be ZERO in the beginning of this process.
Signed-off-by: Yelena Krivosheev <yelena@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald reported that IPv6 route leaking between VRFs is not working.
The root cause is the strict argument in the call to rt6_lookup when
validating the nexthop spec.
ip6_route_check_nh validates the gateway and device (if given) of a
route spec. It in turn could call rt6_lookup (e.g., lookup in a given
table did not succeed so it falls back to a full lookup) and if so
sets the strict argument to 1. That means if the egress device is given,
the route lookup needs to return a result with the same device. This
strict requirement does not work with VRFs (IPv4 or IPv6) because the
oif in the flow struct is overridden with the index of the VRF device
to trigger a match on the l3mdev rule and force the lookup to its table.
The right long term solution is to add an l3mdev index to the flow
struct such that the oif is not overridden. That solution will not
backport well, so this patch aims for a simpler solution to relax the
strict argument if the route spec device is an l3mdev slave. As done
in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the
RT6_LOOKUP_F_IFACE flag needs to be removed.
Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack")
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Miguel reported an skb use after free / double free in vrf_finish_output
when neigh_output returns an error. The vrf driver should return after
the call to neigh_output as it takes over the skb on error path as well.
Patch is a simplified version of Miguel's patch which was written for 4.9,
and updated to top of tree.
Fixes: 8f58336d3f78a ("net: Add ethernet header for pass through VRF device")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enabling TSO can lead to abysmal performances when using seg6 in
encap mode, such as with the ixgbe driver. This patch adds a call to
iptunnel_handle_offloads() to remove the encapsulation bit if needed.
Before:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 36592 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 196 KBytes 1.60 Mbits/sec 47 6.66 KBytes
[ 4] 1.00-2.00 sec 304 KBytes 2.49 Mbits/sec 100 5.33 KBytes
[ 4] 2.00-3.00 sec 284 KBytes 2.32 Mbits/sec 92 5.33 KBytes
After:
root@comp4-seg6bpf:~# iperf3 -c fc00::55
Connecting to host fc00::55, port 5201
[ 4] local fc45::4 port 43062 connected to fc00::55 port 5201
[ ID] Interval Transfer Bandwidth Retr Cwnd
[ 4] 0.00-1.00 sec 1.03 GBytes 8.89 Gbits/sec 0 743 KBytes
[ 4] 1.00-2.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
[ 4] 2.00-3.00 sec 1.03 GBytes 8.87 Gbits/sec 0 743 KBytes
Reported-by: Tom Herbert <tom@quantonium.net>
Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When calculating difference between samples, the values
are multiplied by 100. Large values may cause int overflow
when multiplied (usually on first iteration).
Fixed by forcing 100 to be of type unsigned long.
Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol. When we have a vlan device with reorder_hdr
disabled on top of the tun device, such packets from tun devices are
untagged in skb_vlan_untag() and vlan headers will be inserted back in
vlan_insert_inner_tag().
vlan_insert_inner_tag() however did not expect packets without ethernet
headers, so in such a case size argument for memmove() underflowed.
We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Also don't write vlan protocol in skb->data when it does not have enough
room for it.
Fixes: cbe7128c4b92 ("vlan: Fix out of order vlan headers with reorder header off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In some situation vlan packets do not have ethernet headers. One example
is packets from tun devices. Users can specify vlan protocol in tun_pi
field instead of IP protocol, and skb_vlan_untag() attempts to untag such
packets.
skb_vlan_untag() (more precisely, skb_reorder_vlan_header() called by it)
however did not expect packets without ethernet headers, so in such a case
size argument for memmove() underflowed and triggered crash.
====
BUG: unable to handle kernel paging request at ffff8801cccb8000
IP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
PGD 9cee067 P4D 9cee067 PUD 1d9401063 PMD 1cccb7063 PTE 2810100028101
Oops: 000b [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 17663 Comm: syz-executor2 Not tainted 4.16.0-rc7+ #368
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43
RSP: 0018:ffff8801cc046e28 EFLAGS: 00010287
RAX: ffff8801ccc244c4 RBX: fffffffffffffffe RCX: fffffffffff6c4c2
RDX: fffffffffffffffe RSI: ffff8801cccb7ffc RDI: ffff8801cccb8000
RBP: ffff8801cc046e48 R08: ffff8801ccc244be R09: ffffed0039984899
R10: 0000000000000001 R11: ffffed0039984898 R12: ffff8801ccc244c4
R13: ffff8801ccc244c0 R14: ffff8801d96b7c06 R15: ffff8801d96b7b40
FS: 00007febd562d700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff8801cccb8000 CR3: 00000001ccb2f006 CR4: 00000000001606e0
DR0: 0000000020000000 DR1: 0000000020000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
memmove include/linux/string.h:360 [inline]
skb_reorder_vlan_header net/core/skbuff.c:5031 [inline]
skb_vlan_untag+0x470/0xc40 net/core/skbuff.c:5061
__netif_receive_skb_core+0x119c/0x3460 net/core/dev.c:4460
__netif_receive_skb+0x2c/0x1b0 net/core/dev.c:4627
netif_receive_skb_internal+0x10b/0x670 net/core/dev.c:4701
netif_receive_skb+0xae/0x390 net/core/dev.c:4725
tun_rx_batched.isra.50+0x5ee/0x870 drivers/net/tun.c:1555
tun_get_user+0x299e/0x3c20 drivers/net/tun.c:1962
tun_chr_write_iter+0xb9/0x160 drivers/net/tun.c:1990
call_write_iter include/linux/fs.h:1782 [inline]
new_sync_write fs/read_write.c:469 [inline]
__vfs_write+0x684/0x970 fs/read_write.c:482
vfs_write+0x189/0x510 fs/read_write.c:544
SYSC_write fs/read_write.c:589 [inline]
SyS_write+0xef/0x220 fs/read_write.c:581
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x454879
RSP: 002b:00007febd562cc68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007febd562d6d4 RCX: 0000000000454879
RDX: 0000000000000157 RSI: 0000000020000180 RDI: 0000000000000014
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000006b0 R14: 00000000006fc120 R15: 0000000000000000
Code: 90 90 90 90 90 90 90 48 89 f8 48 83 fa 20 0f 82 03 01 00 00 48 39 fe 7d 0f 49 89 f0 49 01 d0 49 39 f8 0f 8f 9f 00 00 00 48 89 d1 <f3> a4 c3 48 81 fa a8 02 00 00 72 05 40 38 fe 74 3b 48 83 ea 20
RIP: __memmove+0x24/0x1a0 arch/x86/lib/memmove_64.S:43 RSP: ffff8801cc046e28
CR2: ffff8801cccb8000
====
We don't need to copy headers for packets which do not have preceding
headers of vlan headers, so skip memmove() in that case.
Fixes: 4bbb3e0e8239 ("net: Fix vlan untag for bridge and vlan_dev with reorder_hdr off")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Trivial fix to spelling mistake in message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If a page is already locked, attempting to dirty it leads to a deadlock
in lock_page(). This is what currently happens to ITER_BVEC pages when
a dio-enabled loop device is backed by ceph:
$ losetup --direct-io /dev/loop0 /mnt/cephfs/img
$ xfs_io -c 'pread 0 4k' /dev/loop0
Follow other file systems and only dirty ITER_IOVEC pages.
Cc: stable@kernel.org
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't). Unfortunately commit 519049afea ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.
This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.
Fix this by using a different variable to store blkdev_get()'s return.
Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
The ability to have multipath dynamically attach a scsi_dh, that the user
specified in the multipath table, was broken by commit e8f74a0f00 ("dm
mpath: eliminate need to use scsi_device_from_queue").
Restore the ability to load, and attach, a particular scsi_dh module if
one is specified (as noticed by checking m->hw_handler_name).
Fixes: e8f74a0f00 ("dm mpath: eliminate need to use scsi_device_from_queue")
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
Vq log_base is the userspace address of bitmap which has nothing to do
with IOTLB. So it needs to be validated unconditionally otherwise we
may try use 0 as log_base which may lead to pin pages that will lead
unexpected result (e.g trigger BUG_ON() in set_bit_to_user()).
Fixes: 6b1e6cc7855b0 ("vhost: new device IOTLB API")
Reported-by: syzbot+6304bf97ef436580fede@syzkaller.appspotmail.com
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Today, driver drops received packets which are indicated as
invalid checksum by the device. Instead of dropping such packets,
pass them to the stack with CHECKSUM_NONE indication in skb.
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turns out that the loop where we read manufacturer
jedec_read_mfd() can under some circumstances get a
CFI_MFR_CONTINUATION repeatedly, making the loop go
over all banks and eventually hit the end of the
map and crash because of an access violation:
Unable to handle kernel paging request at virtual address c4980000
pgd = (ptrval)
[c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000
Internal error: Oops: 7 [#1] PREEMPT ARM
CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150
Hardware name: Gemini (Device Tree)
PC is at jedec_probe_chip+0x6ec/0xcd0
LR is at 0x4
pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013
sp : c382dd18 ip : 0000ffff fp : 00000000
r10: c0626388 r9 : 00020000 r8 : c0626340
r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70
r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
Control: 0000397f Table: 00004000 DAC: 00000053
Process swapper (pid: 1, stack limit = 0x(ptrval))
Fix this by breaking the loop with a return 0 if
the offset exceeds the map size.
Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0")
Cc: <stable@vger.kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
get_sectorsize() was not using the appropriate macro to extract the
ECC sector size from the config cache, which led to buggy ECC when
using 1024 byte sectors.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Cc: <stable@vger.kernel.org>
Reported-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Olivier Schonken <olivier.schonken@gmail.com>
|
|
My recent change to netvsc drive in how receive flags are handled
broke multicast. The Hyper-v/Azure virtual interface there is not a
multicast filter list, filtering is only all or none. The driver must
enable all multicast if any multicast address is present.
Fixes: 009f766ca238 ("hv_netvsc: filter multicast/broadcast")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
