summaryrefslogtreecommitdiffstats
path: root/arch/arm (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: rockchip: move the public part to rk3288-evb commonChris Zhong2015-12-113-36/+32
| | | | | | | | | | Rk3288-evb-act8846 and rk3288-evb-rk808 are the power boards of rk3288-evb, they provide the same power supply interface to the motherboard. Sort out them, put the public part to rk3288-evb.dtsi, such as gmac and cpu-supply, leaving only the power section. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846Chris Zhong2015-12-111-0/+34
| | | | | | | vcc_wl and vcc_lcd are 2 gpio switches for rk3288-evb-act8846 board. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846Chris Zhong2015-12-111-1/+1
| | | | | | | | According to the schematic, the name of REG8 should be vcc_tp, rather than vcca_tp. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add gpio-ir-receiver to the R89 boardHeiko Stuebner2015-12-041-0/+13
| | | | | | Add support for the IR receiver present on the R89 board. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add touchscreen node to veyron minnieHeiko Stuebner2015-12-031-0/+12
| | | | | | | Minnie provides an elan,ekth3500 touchscreen over the display, so add the necessary node to enable it. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
* ARM: dts: rockchip: add veyron-mickey boardChris Zhong2015-12-032-0/+251
| | | | | | | | | | Also known as the Asus Chromebit. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Tested-by: Caesar Wang <wxt@rock-chips.com> For the license change: Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add veyron-brain boardHeiko Stuebner2015-12-032-0/+140
| | | | | | | | | | | Similar to pinky, brain is a development model and probably also nearing extinction. But to keep pinky from being lonely I'll keep the two brain boards around as well, especially as they as well have easily accessible dut-connectors. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> For the license change: Acked-by: Brian Norris <briannorris@chromium.org>
* ARM: dts: rockchip: make sure edp_24m is associated to xin24m on veyronHeiko Stuebner2015-12-031-0/+5
| | | | | | | | | | | | | | | | | | | The edp-24m clock has two possible sources: the 24MHz oscillator as well as an external 27MHz input. The power-on-default is the 27MHz clock which is not supplied on all Rockchip boards. While on all current boards and also all Veyron Chromebooks the bootloader seems to adapt the muxing to the internal source, this doesn't seem to be the case on headless veyron devices like brain and mickey making the edp-24m clock an orphan. On the hardware side the 27m input also is not connected at all. With the upcoming deferral of orphan-clocks this results in the power- domain code deferring, as it cannot request the needed clock and if the synchronous reset is sucessfullat all in this case is also unknown. So fix that by making sure, the edp-24m clock is muxed to the internal 24MHz oscillator at all times. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
* ARM: dts: rockchip: override thermal settings on veyron-speedyHeiko Stuebner2015-12-011-0/+8
| | | | | | | | | According to a commit on the ChromeOS kernel, the temperature of the Speedy surface is over skin temperature spec. So adjust the thermal settings to mimic the ChromeOS tree to stay within these spec limits. Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Reviewed-by: Caesar Wang <wxt@rock-chips.com>
* ARM: dts: rockchip: update the thermal management on rk3288Caesar Wang2015-12-011-2/+12
| | | | | | | | | In some cases the machine radiating is very poor,sometime the temperature is rising very quickly on heavy loading.So we need have more frequent polling and better granularity. Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com>
* ARM: dts: rockchip: Add Crypto node for rk3288Zain Wang2015-11-271-0/+12
| | | | | | | | Add Crypto node for rk3288 including crypto controller and dma clk. Signed-off-by: Zain Wang <zain.wang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add rk3036-evb boardXing Zheng2015-11-242-0/+65
| | | | | | | Initial release for rk3036 sdk board. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add core rk3036 dtsiXing Zheng2015-11-241-0/+554
| | | | | | | Initial release for rk3036 shared dtsi. Signed-off-by: Xing Zheng <zhengxing@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: Add IR receiver to RK3288 Radxa Rock 2 SquareSjoerd Simons2015-11-231-0/+13
| | | | | | | | Add support for the IR receiver as present on the Radxa Rock 2 Square board. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: add channels properties for i2sSugar Zhang2015-11-203-0/+10
| | | | | | | add playback and capture properties to compatible various chips. Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: set system-power-controller property on rk3288-rock2John Keeping2015-11-191-0/+1
| | | | | | | | The act8846 on rock2 boards controls the system power, so add the appropriate property to allow turning off the board. Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: Setup rk3066/rk3188 ethernet0 alias for u-bootHeiko Stuebner2015-11-191-0/+1
| | | | | | | | Add an ethernet0 alias for the RK3066/RK3188 mac interface so that u-boot can find the device-node and fill in the mac address on boards that support a wired network interface. Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* ARM: dts: rockchip: Setup rk3288 ethernet0 alias for u-bootSjoerd Simons2015-11-191-0/+1
| | | | | | | | | Add an ethernet0 alias for the RK3288 mac interface so that u-boot can find the device-node and fill in the mac address on boards that support a wired network interface. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* Merge tag 'armsoc-defconfig' of ↵Linus Torvalds2015-11-1113-69/+147
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "Defconfig updates are kept separate from other branches mostly to avoid conflicts between the different categories (driver branch enabling something that has context conflict with SoC options, etc). A lot of this again is scattered across the various hardware platforms. multi_v7_defconfig, our "generic" config for most 32-bit platforms has been gone through by Marvell Berlin maintainers and added most options they need to run on their hardware. Broadcom NSP is also added there, and the new Atmel SAMA5D2 (added last release). Rockchip also has display and other devices supported in that config. In addition to that, the usual small churn of new options being added here and there" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (45 commits) ARM: multi_v7_defconfig: enable UniPhier I2C drivers ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in ARM: exynos_defconfig: Disable simplefb support ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4 ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget ARM: exynos_defconfig: Enable USB Video Class support ARM: multi_v7_defconfig: improve multi_v7_defconfig support for Berlin ARM: tegra: Update multi_v7_defconfig ARM: multi_v7_defconfig: Add Atmel SDHCI device ARM: multi_v7_defconfig: Add Atmel Flexcom device ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig ARM: at91/defconfig: update at91_dt defconfig ARM: at91/defconfig: update sama5 defconfig ARM: configs: Enable FIXED_PHY in multi_v7 defconfig ARM: configs: update lpc18xx defconfig ARM: socfpga_defconfig: enable fpga manager ...
| * ARM: multi_v7_defconfig: enable UniPhier I2C driversMasahiro Yamada2015-10-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | These two drivers were merged into the I2C sub-system by commit dd6fd4a32793 ("i2c: uniphier: add UniPhier FIFO-less I2C driver") and commit 6a62974b667f ("i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver"). Enable them from arch/arm/configs/multi_v7_defconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * Merge tag 'samsung-defconfig' of ↵Olof Johansson2015-10-262-3/+18
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/defconfig Samsung defconfig udpates for v4.4 - exynos_defconfig : enable USB Video Class for Peach boards. : enable DWC2 USB and USB ethernet gadget : enable LEDs (LEGS_GPIO and LEDS_PWM)for Odroid-XU3/XU4 : enable RTL8152 for Odroid-XU4 : enable WiFi-Ex as a module instead of build-in : disable temporal simplefb support (FB_SIMPLE) because exynos DRM driver can support it now - multi_v7_defconfig : enable DWC2 USB and USB ethernet gadget : enable RTL8152 for Odroid-XU4 * tag 'samsung-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4 ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-in ARM: exynos_defconfig: Disable simplefb support ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4 ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadget ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadget ARM: exynos_defconfig: Enable USB Video Class support Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: multi_v7_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4Anand Moon2015-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Odroid XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over USB 3.0. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Enable rtl8152 ethernet driver for Odroid-XU4Anand Moon2015-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Odroid-XU4 has a RTL8153-CG gigabit Ethernet adapter, connected over USB 3.0. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Enable WiFi-Ex as a module instead built-inJavier Martinez Canillas2015-10-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Marvell WiFi-Ex driver tries to load a firmware on probe. So if the driver is built-in and probed before a firmware is available, this is not loaded and the chip does not work. This happens for example if an initramfs isn't used since the driver is probed before the root filesystem is mounted. Change the default config since the driver isn't needed for machines to boot and is more convenient to have it enabled as a module to avoid requiring an initramfs or to have the firmware built into the kernel. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Disable simplefb supportJavier Martinez Canillas2015-10-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The simplefb driver allows the kernel to render on a pre-allocated buffer that's been initialized by firmware before the kernel boots. This option was enabled to have display working on the Exynos5250 Snow Chromebook by commit da9d0fbf5e9a ("ARM: exynos: defconfig update") since proper DRM/KMS support did not exist at that time. But now that the Exynos DRM driver has support for this hardware, there is no need to have simplefb enabled. In fact, if a user has a u-boot that injects the simplefb dev node to the FDT before pass it to the kernel, display won't be properly initialized and only a blank screen will be shown since there isn't a proper handoff from the simplefb driver to the Exynos DRM driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Michael Turquette <mturquette@baylibre.com> Tested-by: Michael Turquette <mturquette@baylibre.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Enable LEDS for Odroid-XU3/XU4Anand Moon2015-10-231-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Odroid XU3 family boards come with RGB LEDs. Enabling LEDS_GPIO and LEDS_PWM allows monitoring the board alive state (heartbeat) and MMC/SDcard IO usage. Signed-off-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> [k.kozlowski: Rewritten the commit message] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: multi_v7_defconfig: Enable DWC2 USB driver and USB ethernet gadgetMarek Szyprowski2015-10-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Enable DWC2 USB driver and USB ethernet gadgetMarek Szyprowski2015-10-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | DWC2 (s3c-hsotg) hardware module is available on many Exynos based boards, so enable DWC2 driver as well as the most common USB Ethernet gadget. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * ARM: exynos_defconfig: Enable USB Video Class supportJavier Martinez Canillas2015-10-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos5420 Peach Pit and Exynos5800 Peach Pi boards have a built-in Silicon Motion USB UVC WebCam. Enable support for the USB Video Class driver and its needed media Kconfig symbols so the camera is supported. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| * | Merge tag 'tegra-for-4.4-defconfig' of ↵Olof Johansson2015-10-262-3/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig ARM: tegra: Default configuration updates for v4.4-rc1 Enable touchscreen and audio support on Toradex Colibri platforms. * tag 'tegra-for-4.4-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Update multi_v7_defconfig ARM: tegra: Update default configuration ARM: tegra: Rebuild default configuration on v4.3-rc1 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: tegra: Update multi_v7_defconfigThierry Reding2015-10-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable some options that have recently been enabled on Tegra platforms: * TOUCHSCREEN_WM97XX: touchscreen support on Toradex Colibri * SND_SOC_TEGRA_WM9712: audio support on Toradex Colibri Signed-off-by: Thierry Reding <treding@nvidia.com>
| | * | ARM: tegra: Update default configurationMarcel Ziswiler2015-09-151-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the Tegra default configuration for the following features: - expose hardware/virtual IRQ mapping via debugfs - WM9712 audio/touch controller as found on Colibri T20 - sysfs interface for GPIOs - NFS client support for NFS version 4 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| | * | ARM: tegra: Rebuild default configuration on v4.3-rc1Thierry Reding2015-09-151-3/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As a result of rebuilding the configuration the following symbols are removed: - EXT4_FS: ext3 has finally been removed from the kernel. ext4 provides feature parity and can be used to mount ext3 filesystems. EXT3_FS selects EXT4_FS. - EXT3_DEFAULTS_TO_ORDERED: Removed as part of the ext3 filesystem removal. - IPV6: IPv6 is now built-in by default Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | Merge tag 'at91-ab-defconfig' of ↵Olof Johansson2015-10-263-25/+9
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig defconfig update for 4.4: - Add sama5d2 and its peripherals to sama5_defconfig and multi_v7_defconfig - Trivial savedefconfig updates to at91_dt_defconfig and sama5_defconfig * tag 'at91-ab-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: multi_v7_defconfig: Add Atmel SDHCI device ARM: multi_v7_defconfig: Add Atmel Flexcom device ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoC ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfig ARM: at91/defconfig: update at91_dt defconfig ARM: at91/defconfig: update sama5 defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: multi_v7_defconfig: Add Atmel SDHCI deviceLudovic Desroches2015-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT91 SDHCI device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: multi_v7_defconfig: Add Atmel Flexcom deviceLudovic Desroches2015-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Flexcom device has been introduced with Atmel SAMA5D2 SoC. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: multi_v7_defconfig: Add Atmel SAMA5D2 SoCLudovic Desroches2015-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Atmel SAMA5D2 SoC family to multi_v7 image. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: at91/defconfig: add sama5d2 and its new devices to sama5 defconfigLudovic Desroches2015-10-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add SAMA5D2 SoC plus Atmel flexcom and Atmel sdhci devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: at91/defconfig: update at91_dt defconfigLudovic Desroches2015-10-191-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Trivial savedefconfig update. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| | * | ARM: at91/defconfig: update sama5 defconfigLudovic Desroches2015-10-191-10/+1
| | |/ | | | | | | | | | | | | | | | | | | Trivial savedefconfig update. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
| * | Merge tag 'imx-defconfig-4.4' of ↵Olof Johansson2015-10-231-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig The i.MX defconfig updates for 4.4: - Enable i.MX6UL touchscreen controller support. - Remove CONFIG_VMSPLIT_2G option since we already enabled CONFIG_HIGHMEM support. * tag 'imx-defconfig-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Remove CONFIG_VMSPLIT_2G ARM: imx_v6_v7_defconfig: enable imx6ul_tsc Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: imx_v6_v7_defconfig: Remove CONFIG_VMSPLIT_2GFabio Estevam2015-09-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_VMSPLIT_2G was added to mx5_defconfig by commit 06965c39b4c639 ("ARM i.MX5: update defconfig") to fix an issue where mx53 was not detecting the full 1GiB memory range. However, as explained by Russell King [1] the correct fix is to select CONFIG_HIGHMEM. imx_v6_v7_deconfig inherited such option from mx5_defconfig. As imx_v6_v7_deconfig has CONFIG_HIGHMEM=y, we should no longer select such non-standard CONFIG_VMSPLIT_2G option. [1] http://www.spinics.net/lists/arm-kernel/msg137839.html Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | ARM: imx_v6_v7_defconfig: enable imx6ul_tscHaibo Chen2015-09-171-0/+1
| | |/ | | | | | | | | | | | | | | | | | | Enable imx6ul touchscreen controller Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | Merge tag 'sunxi-defconfig-for-4.4' of ↵Olof Johansson2015-10-232-0/+5
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig Allwinner defconfig changes for 4.4 A bunch of defconfig changes to enable support for new drivers. * tag 'sunxi-defconfig-for-4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sunxi_defconfig: enable MODULE_UNLOAD can: Allwinner A10/A20 CAN Controller support - Defconfig can: Allwinner A10/A20 CAN Controller support - Defconfig ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC) Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: sunxi_defconfig: enable MODULE_UNLOADJonathan Liu2015-09-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loadable module support is enabled so we should allow unloading modules too. This also allows lsmod to show values other than "-2" in the "Used by" column. Signed-off-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | can: Allwinner A10/A20 CAN Controller support - DefconfigGerhard Bertelsmann2015-09-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Defconfig multi_v7 for Allwinner A10/A20 CAN driver Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | can: Allwinner A10/A20 CAN Controller support - DefconfigGerhard Bertelsmann2015-09-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Defconfig sunxi for Allwinner A10/A20 CAN driver Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: sunxi_defconfig: Enable LRADC keys (KEYBOARD_SUN4I_LRADC)Priit Laes2015-09-161-0/+1
| | |/ | | | | | | | | | | | | Signed-off-by: Priit Laes <plaes@plaes.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | Merge tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson2015-10-231-1/+8
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | next/defconfig mvebu config for 4.4 (part 1) Update the v7 defconfig witth usefull config for the Seagate NAS * tag 'mvebu-config-4.4-1' of git://git.infradead.org/linux-mvebu: ARM: mvebu: enable options for Seagate NAS in mvebu_v7_defconfig Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: mvebu: enable options for Seagate NAS in mvebu_v7_defconfigSimon Guinot2015-10-121-1/+8
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the following options needed by the Seagate Personal Cloud 1 and 2-Bay and the Seagate NAS 2 and 4-Bay: SATA_AHCI POWER_RESET_GPIO RTC_DRV_DS1307 RTC_DRV_PCF8563 Additionnally this patch also enables NEW_LEDS which was missing for some reasons. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-21 07:15:35 +0100