summaryrefslogtreecommitdiffstats
path: root/arch/x86/include/asm/xen (follow)
Commit message (Collapse)AuthorAgeFilesLines
* x86/xen: fix memblock_reserve() usage on PVHRoger Pau Monne2024-07-251-5/+0
| | | | | | | | | | | | | | | | | | | The current usage of memblock_reserve() in init_pvh_bootparams() is done before the .bss is zeroed, and that used to be fine when memblock_reserved_init_regions implicitly ended up in the .meminit.data section. However after commit 73db3abdca58c memblock_reserved_init_regions ends up in the .bss section, thus breaking it's usage before the .bss is cleared. Move and rename the call to xen_reserve_extra_memory() so it's done in the x86_init.oem.arch_setup hook, which gets executed after the .bss has been zeroed, but before calling e820__memory_setup(). Fixes: 73db3abdca58c ("init/modpost: conditionally check section mismatch to __meminit*") Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20240725073116.14626-3-roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* x86/xen: attempt to inflate the memory balloon on PVHRoger Pau Monne2024-03-131-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running as PVH or HVM Linux will use holes in the memory map as scratch space to map grants, foreign domain pages and possibly miscellaneous other stuff. However the usage of such memory map holes for Xen purposes can be problematic. The request of holesby Xen happen quite early in the kernel boot process (grant table setup already uses scratch map space), and it's possible that by then not all devices have reclaimed their MMIO space. It's not unlikely for chunks of Xen scratch map space to end up using PCI bridge MMIO window memory, which (as expected) causes quite a lot of issues in the system. At least for PVH dom0 we have the possibility of using regions marked as UNUSABLE in the e820 memory map. Either if the region is UNUSABLE in the native memory map, or it has been converted into UNUSABLE in order to hide RAM regions from dom0, the second stage translation page-tables can populate those areas without issues. PV already has this kind of logic, where the balloon driver is inflated at boot. Re-use the current logic in order to also inflate it when running as PVH. onvert UNUSABLE regions up to the ratio specified in EXTRA_MEM_RATIO to RAM, while reserving them using xen_add_extra_mem() (which is also moved so it's no longer tied to CONFIG_PV). [jgross: fixed build for CONFIG_PVH without CONFIG_XEN_PVH] Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240220174341.56131-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'x86-cleanups-2024-01-08' of ↵Linus Torvalds2024-01-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: - Change global variables to local - Add missing kernel-doc function parameter descriptions - Remove unused parameter from a macro - Remove obsolete Kconfig entry - Fix comments - Fix typos, mostly scripted, manually reviewed and a micro-optimization got misplaced as a cleanup: - Micro-optimize the asm code in secondary_startup_64_no_verify() * tag 'x86-cleanups-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86: Fix typos x86/head_64: Use TESTB instead of TESTL in secondary_startup_64_no_verify() x86/docs: Remove reference to syscall trampoline in PTI x86/Kconfig: Remove obsolete config X86_32_SMP x86/io: Remove the unused 'bw' parameter from the BUILDIO() macro x86/mtrr: Document missing function parameters in kernel-doc x86/setup: Make relocated_ramdisk a local variable of relocate_initrd()
| * arch/x86: Fix typosBjorn Helgaas2024-01-031-1/+1
| | | | | | | | | | | | | | | | | | | | Fix typos, most reported by "codespell arch/x86". Only touches comments, no code changes. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240103004011.1758650-1-helgaas@kernel.org
* | acpi/processor: sanitize _OSC/_PDC capabilities for Xen dom0Roger Pau Monne2023-11-131-0/+9
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Processor capability bits notify ACPI of the OS capabilities, and so ACPI can adjust the return of other Processor methods taking the OS capabilities into account. When Linux is running as a Xen dom0, the hypervisor is the entity in charge of processor power management, and hence Xen needs to make sure the capabilities reported by _OSC/_PDC match the capabilities of the driver in Xen. Introduce a small helper to sanitize the buffer when running as Xen dom0. When Xen supports HWP, this serves as the equivalent of commit a21211672c9a ("ACPI / processor: Request native thermal interrupt handling via _OSC") to avoid SMM crashes. Xen will set bit ACPI_PROC_CAP_COLLAB_PROC_PERF (bit 12) in the capability bits and the _OSC/_PDC call will apply it. [ jandryuk: Mention Xen HWP's need. Support _OSC & _PDC ] Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20231108212517.72279-1-jandryuk@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
* x86/xen: allow nesting of same lazy modeJuergen Gross2023-09-191-2/+13
| | | | | | | | | | | | | | | | | | | | | | | When running as a paravirtualized guest under Xen, Linux is using "lazy mode" for issuing hypercalls which don't need to take immediate effect in order to improve performance (examples are e.g. multiple PTE changes). There are two different lazy modes defined: MMU and CPU lazy mode. Today it is not possible to nest multiple lazy mode sections, even if they are of the same kind. A recent change in memory management added nesting of MMU lazy mode sections, resulting in a regression when running as Xen PV guest. Technically there is no reason why nesting of multiple sections of the same kind of lazy mode shouldn't be allowed. So add support for that for fixing the regression. Fixes: bcc6cc832573 ("mm: add default definition of set_ptes()") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20230913113828.18421-4-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* x86/xen: move paravirt lazy codeJuergen Gross2023-09-191-0/+26
| | | | | | | | | | | | | | | | | | Only Xen is using the paravirt lazy mode code, so it can be moved to Xen specific sources. This allows to make some of the functions static or to merge them into their only call sites. While at it do a rename from "paravirt" to "xen" for all moved specifiers. No functional change. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20230913113828.18421-3-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'dma-mapping-6.6-2023-08-29' of ↵Linus Torvalds2023-08-301-6/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/hch/dma-mapping Pull dma-maping updates from Christoph Hellwig: - allow dynamic sizing of the swiotlb buffer, to cater for secure virtualization workloads that require all I/O to be bounce buffered (Petr Tesarik) - move a declaration to a header (Arnd Bergmann) - check for memory region overlap in dma-contiguous (Binglei Wang) - remove the somewhat dangerous runtime swiotlb-xen enablement and unexport is_swiotlb_active (Christoph Hellwig, Juergen Gross) - per-node CMA improvements (Yajun Deng) * tag 'dma-mapping-6.6-2023-08-29' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: optimize get_max_slots() swiotlb: move slot allocation explanation comment where it belongs swiotlb: search the software IO TLB only if the device makes use of it swiotlb: allocate a new memory pool when existing pools are full swiotlb: determine potential physical address limit swiotlb: if swiotlb is full, fall back to a transient memory pool swiotlb: add a flag whether SWIOTLB is allowed to grow swiotlb: separate memory pool data from other allocator data swiotlb: add documentation and rename swiotlb_do_find_slots() swiotlb: make io_tlb_default_mem local to swiotlb.c swiotlb: bail out of swiotlb_init_late() if swiotlb is already allocated dma-contiguous: check for memory region overlap dma-contiguous: support numa CMA for specified node dma-contiguous: support per-numa CMA for all architectures dma-mapping: move arch_dma_set_mask() declaration to header swiotlb: unexport is_swiotlb_active x86: always initialize xen-swiotlb when xen-pcifront is enabling xen/pci: add flag for PCI passthrough being possible
| * x86: always initialize xen-swiotlb when xen-pcifront is enablingChristoph Hellwig2023-07-311-6/+0
| | | | | | | | | | | | | | | | | | | | Remove the dangerous late initialization of xen-swiotlb in pci_xen_swiotlb_init_late and instead just always initialize xen-swiotlb in the boot code if CONFIG_XEN_PCIDEV_FRONTEND is enabled and Xen PV PCI is possible. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Juergen Gross <jgross@suse.com>
* | x86/xen: Make virt_to_pfn() a static inlineLinus Walleij2023-08-211-1/+4
|/ | | | | | | | | | | | | | | | | | | Making virt_to_pfn() a static inline taking a strongly typed (const void *) makes the contract of a passing a pointer of that type to the function explicit and exposes any misuse of the macro virt_to_pfn() acting polymorphic and accepting many types such as (void *), (unitptr_t) or (unsigned long) as arguments without warnings. Also fix all offending call sites to pass a (void *) rather than an unsigned long. Since virt_to_mfn() is wrapping virt_to_pfn() this function has become polymorphic as well so the usage need to be fixed up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20230810-virt-to-phys-x86-xen-v1-1-9e966d333e7a@linaro.org Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'for-linus-6.3-rc3-tag' of ↵Linus Torvalds2023-03-171-4/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - cleanup for xen time handling - enable the VGA console in a Xen PVH dom0 - cleanup in the xenfs driver * tag 'for-linus-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: remove unnecessary (void*) conversions x86/PVH: obtain VGA console info in Dom0 x86/xen/time: cleanup xen_tsc_safe_clocksource xen: update arch/x86/include/asm/xen/cpuid.h
| * xen: update arch/x86/include/asm/xen/cpuid.hKrister Johansen2023-02-231-4/+18
| | | | | | | | | | | | | | | | | | | | | | Update arch/x86/include/asm/xen/cpuid.h from the Xen tree to get newest definitions. This picks up some TSC mode definitions and comment formatting changes. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/94b9046dd0db3794f0633d134b7108508957758d.1677038165.git.kjlx@templeofstupid.com Signed-off-by: Juergen Gross <jgross@suse.com>
* | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2023-02-251-1/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull kvm updates from Paolo Bonzini: "ARM: - Provide a virtual cache topology to the guest to avoid inconsistencies with migration on heterogenous systems. Non secure software has no practical need to traverse the caches by set/way in the first place - Add support for taking stage-2 access faults in parallel. This was an accidental omission in the original parallel faults implementation, but should provide a marginal improvement to machines w/o FEAT_HAFDBS (such as hardware from the fruit company) - A preamble to adding support for nested virtualization to KVM, including vEL2 register state, rudimentary nested exception handling and masking unsupported features for nested guests - Fixes to the PSCI relay that avoid an unexpected host SVE trap when resuming a CPU when running pKVM - VGIC maintenance interrupt support for the AIC - Improvements to the arch timer emulation, primarily aimed at reducing the trap overhead of running nested - Add CONFIG_USERFAULTFD to the KVM selftests config fragment in the interest of CI systems - Avoid VM-wide stop-the-world operations when a vCPU accesses its own redistributor - Serialize when toggling CPACR_EL1.SMEN to avoid unexpected exceptions in the host - Aesthetic and comment/kerneldoc fixes - Drop the vestiges of the old Columbia mailing list and add [Oliver] as co-maintainer RISC-V: - Fix wrong usage of PGDIR_SIZE instead of PUD_SIZE - Correctly place the guest in S-mode after redirecting a trap to the guest - Redirect illegal instruction traps to guest - SBI PMU support for guest s390: - Sort out confusion between virtual and physical addresses, which currently are the same on s390 - A new ioctl that performs cmpxchg on guest memory - A few fixes x86: - Change tdp_mmu to a read-only parameter - Separate TDP and shadow MMU page fault paths - Enable Hyper-V invariant TSC control - Fix a variety of APICv and AVIC bugs, some of them real-world, some of them affecting architecurally legal but unlikely to happen in practice - Mark APIC timer as expired if its in one-shot mode and the count underflows while the vCPU task was being migrated - Advertise support for Intel's new fast REP string features - Fix a double-shootdown issue in the emergency reboot code - Ensure GIF=1 and disable SVM during an emergency reboot, i.e. give SVM similar treatment to VMX - Update Xen's TSC info CPUID sub-leaves as appropriate - Add support for Hyper-V's extended hypercalls, where "support" at this point is just forwarding the hypercalls to userspace - Clean up the kvm->lock vs. kvm->srcu sequences when updating the PMU and MSR filters - One-off fixes and cleanups - Fix and cleanup the range-based TLB flushing code, used when KVM is running on Hyper-V - Add support for filtering PMU events using a mask. If userspace wants to restrict heavily what events the guest can use, it can now do so without needing an absurd number of filter entries - Clean up KVM's handling of "PMU MSRs to save", especially when vPMU support is disabled - Add PEBS support for Intel Sapphire Rapids - Fix a mostly benign overflow bug in SEV's send|receive_update_data() - Move several SVM-specific flags into vcpu_svm x86 Intel: - Handle NMI VM-Exits before leaving the noinstr region - A few trivial cleanups in the VM-Enter flows - Stop enabling VMFUNC for L1 purely to document that KVM doesn't support EPTP switching (or any other VM function) for L1 - Fix a crash when using eVMCS's enlighted MSR bitmaps Generic: - Clean up the hardware enable and initialization flow, which was scattered around multiple arch-specific hooks. Instead, just let the arch code call into generic code. Both x86 and ARM should benefit from not having to fight common KVM code's notion of how to do initialization - Account allocations in generic kvm_arch_alloc_vm() - Fix a memory leak if coalesced MMIO unregistration fails selftests: - On x86, cache the CPU vendor (AMD vs. Intel) and use the info to emit the correct hypercall instruction instead of relying on KVM to patch in VMMCALL - Use TAP interface for kvm_binary_stats_test and tsc_msrs_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (325 commits) KVM: SVM: hyper-v: placate modpost section mismatch error KVM: x86/mmu: Make tdp_mmu_allowed static KVM: arm64: nv: Use reg_to_encoding() to get sysreg ID KVM: arm64: nv: Only toggle cache for virtual EL2 when SCTLR_EL2 changes KVM: arm64: nv: Filter out unsupported features from ID regs KVM: arm64: nv: Emulate EL12 register accesses from the virtual EL2 KVM: arm64: nv: Allow a sysreg to be hidden from userspace only KVM: arm64: nv: Emulate PSTATE.M for a guest hypervisor KVM: arm64: nv: Add accessors for SPSR_EL1, ELR_EL1 and VBAR_EL1 from virtual EL2 KVM: arm64: nv: Handle SMCs taken from virtual EL2 KVM: arm64: nv: Handle trapped ERET from virtual EL2 KVM: arm64: nv: Inject HVC exceptions to the virtual EL2 KVM: arm64: nv: Support virtual EL2 exceptions KVM: arm64: nv: Handle HCR_EL2.NV system register traps KVM: arm64: nv: Add nested virt VCPU primitives for vEL2 VCPU state KVM: arm64: nv: Add EL2 system registers to vcpu context KVM: arm64: nv: Allow userspace to set PSR_MODE_EL2x KVM: arm64: nv: Reset VCPU to EL2 registers if VCPU nested virt is set KVM: arm64: nv: Introduce nested virtualization VCPU feature KVM: arm64: Use the S2 MMU context to iterate over S2 table ...
| * | KVM: x86/xen: update Xen CPUID Leaf 4 (tsc info) sub-leaves, if presentPaul Durrant2023-01-241-1/+3
| |/ | | | | | | | | | | | | | | | | | | | | | | | | The scaling information in subleaf 1 should match the values set by KVM in the 'vcpu_info' sub-structure 'time_info' (a.k.a. pvclock_vcpu_time_info) which is shared with the guest, but is not directly available to the VMM. The offset values are not set since a TSC offset is already applied. The TSC frequency should also be set in sub-leaf 2. Signed-off-by: Paul Durrant <pdurrant@amazon.com> Reviewed-by: David Woodhouse <dwmw@amazon.co.uk> Link: https://lore.kernel.org/r/20230106103600.528-3-pdurrant@amazon.com Signed-off-by: Sean Christopherson <seanjc@google.com>
* / cpuidle, xenpv: Make more PARAVIRT_XXL noinstr cleanPeter Zijlstra2023-01-131-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | objtool found a few cases where this code called out into instrumented code: vmlinux.o: warning: objtool: acpi_idle_enter_s2idle+0xde: call to wbinvd() leaves .noinstr.text section vmlinux.o: warning: objtool: default_idle+0x4: call to arch_safe_halt() leaves .noinstr.text section vmlinux.o: warning: objtool: xen_safe_halt+0xa: call to HYPERVISOR_sched_op.constprop.0() leaves .noinstr.text section Solve this by: - marking arch_safe_halt(), wbinvd(), native_wbinvd() and HYPERVISOR_sched_op() as __always_inline(). - Explicitly uninlining xen_safe_halt() and pv_native_wbinvd() [they were already uninlined by the compiler on use as function pointers] and annotating them as 'noinstr'. - Annotating pv_native_safe_halt() as 'noinstr'. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20230112195541.171918174@infradead.org
* x86/xen: Add support for HVMOP_set_evtchn_upcall_vectorJane Malalane2022-08-122-1/+4
| | | | | | | | | | | | | | | | | | Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in order to set the per-vCPU event channel vector callback on Linux and use it in preference of HVM_PARAM_CALLBACK_IRQ. If the per-VCPU vector setup is successful on BSP, use this method for the APs. If not, fallback to the global vector-type callback. Also register callback_irq at per-vCPU event channel setup to trick toolstack to think the domain is enlightened. Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com> Signed-off-by: Jane Malalane <jane.malalane@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'for-linus-5.19-rc1b-tag' of ↵Linus Torvalds2022-06-041-3/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: "Two cleanup patches for Xen related code and (more important) an update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step down" * tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: replace xen_remap() with memremap() MAINTAINERS: Update Xen maintainership xen: switch gnttab_end_foreign_access() to take a struct page pointer
| * xen: replace xen_remap() with memremap()Juergen Gross2022-06-011-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xen_remap() is used to establish mappings for frames not under direct control of the kernel: for Xenstore and console ring pages, and for grant pages of non-PV guests. Today xen_remap() is defined to use ioremap() on x86 (doing uncached mappings), and ioremap_cache() on Arm (doing cached mappings). Uncached mappings for those use cases are bad for performance, so they should be avoided if possible. As all use cases of xen_remap() don't require uncached mappings (the mapped area is always physical RAM), a mapping using the standard WB cache mode is fine. As sparse is flagging some of the xen_remap() use cases to be not appropriate for iomem(), as the result is not annotated with the __iomem modifier, eliminate xen_remap() completely and replace all use cases with memremap() specifying the MEMREMAP_WB caching mode. xen_unmap() can be replaced with memunmap(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* | swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on armChristoph Hellwig2022-05-112-24/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | swiotlb-xen uses very different ways to allocate coherent memory on x86 vs arm. On the former it allocates memory from the page allocator, while on the later it reuses the dma-direct allocator the handles the complexities of non-coherent DMA on arm platforms. Unfortunately the complexities of trying to deal with the two cases in the swiotlb-xen.c code lead to a bug in the handling of DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING flag the coherent memory allocator does not actually allocate coherent memory, but just a DMA handle for some memory that is DMA addressable by the device, but which does not have to have a kernel mapping. Thus dereferencing the return value will lead to kernel crashed and memory corruption. Fix this by using the dma-direct allocator directly for arm, which works perfectly fine because on arm swiotlb-xen is only used when the domain is 1:1 mapped, and then simplifying the remaining code to only cater for the x86 case with DMA coherent device. Reported-by: Rahul Singh <Rahul.Singh@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Rahul Singh <rahul.singh@arm.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Tested-by: Rahul Singh <rahul.singh@arm.com>
* | swiotlb: merge swiotlb-xen initialization into swiotlbChristoph Hellwig2022-04-181-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse the generic swiotlb initialization for xen-swiotlb. For ARM/ARM64 this works trivially, while for x86 xen_swiotlb_fixup needs to be passed as the remap argument to swiotlb_init_remap/swiotlb_init_late. Note that the lower bound of the swiotlb size is changed to the smaller IO_TLB_MIN_SLABS based value with this patch, but that is fine as the 2MB value used in Xen before was just an optimization and is not the hard lower bound. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* | x86: remove the IOMMU table infrastructureChristoph Hellwig2022-04-181-2/+0
|/ | | | | | | | | | | | The IOMMU table tries to separate the different IOMMUs into different backends, but actually requires various cross calls. Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly in pci-dma.c and then just call into the IOMMU drivers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen/x86: detect support for extended destination IDRoger Pau Monne2022-02-101-0/+7
| | | | | | | | | | | | | Xen allows the usage of some previously reserved bits in the IO-APIC RTE and the MSI address fields in order to store high bits for the target APIC ID. Such feature is already implemented by QEMU/KVM and HyperV, so in order to enable it just add the handler that checks for it's presence. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220120152527.7524-3-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
* xen/x2apic: enable x2apic mode when supported for HVMRoger Pau Monne2022-01-281-14/+0
| | | | | | | | | | | | | | There's no point in disabling x2APIC mode when running as a Xen HVM guest, just enable it when available. Remove some unneeded wrapping around the detection functions, and simply provide a xen_x2apic_available helper that's a wrapper around x2apic_supported. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220121090146.13697-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Merge tag 'irq-msi-2022-01-13' of ↵Linus Torvalds2022-01-131-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull MSI irq updates from Thomas Gleixner: "Rework of the MSI interrupt infrastructure. This is a treewide cleanup and consolidation of MSI interrupt handling in preparation for further changes in this area which are necessary to: - address existing shortcomings in the VFIO area - support the upcoming Interrupt Message Store functionality which decouples the message store from the PCI config/MMIO space" * tag 'irq-msi-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (94 commits) genirq/msi: Populate sysfs entry only once PCI/MSI: Unbreak pci_irq_get_affinity() genirq/msi: Convert storage to xarray genirq/msi: Simplify sysfs handling genirq/msi: Add abuse prevention comment to msi header genirq/msi: Mop up old interfaces genirq/msi: Convert to new functions genirq/msi: Make interrupt allocation less convoluted platform-msi: Simplify platform device MSI code platform-msi: Let core code handle MSI descriptors bus: fsl-mc-msi: Simplify MSI descriptor handling soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs() soc: ti: ti_sci_inta_msi: Rework MSI descriptor allocation NTB/msi: Convert to msi_on_each_desc() PCI: hv: Rework MSI handling powerpc/mpic_u3msi: Use msi_for_each-desc() powerpc/fsl_msi: Use msi_for_each_desc() powerpc/pasemi/msi: Convert to msi_on_each_dec() powerpc/cell/axon_msi: Convert to msi_on_each_desc() powerpc/4xx/hsta: Rework MSI handling ...
| * x86/xen: Use correct #ifdef guard for xen_initdom_restore_msi()Arnd Bergmann2021-12-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The #ifdef check around the definition doesn't match the one around the declaration, leading to a link failure when CONFIG_XEN_DOM0 is enabled but CONFIG_XEN_PV_DOM0 is not: x86_64-linux-ld: arch/x86/kernel/apic/msi.o: in function `arch_restore_msi_irqs': msi.c:(.text+0x29a): undefined reference to `xen_initdom_restore_msi' Change the declaration to use the same check that was already present around the function definition. Fixes: ae72f3156729 ("PCI/MSI: Make arch_restore_msi_irqs() less horrible.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20211215140209.451379-1-arnd@kernel.org
| * PCI/MSI: Make arch_restore_msi_irqs() less horrible.Thomas Gleixner2021-12-091-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Make arch_restore_msi_irqs() return a boolean which indicates whether the core code should restore the MSI message or not. Get rid of the indirection in x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI Link: https://lore.kernel.org/r/20211206210224.485668098@linutronix.de
* | x86/xen: Remove .fixup usagePeter Zijlstra2021-12-111-11/+3
|/ | | | | | | | | | | | | Employ the fancy new EX_TYPE_IMM_REG to store -EFAULT in the return register and use this to remove some Xen .fixup usage. All callers of these functions only test for 0 return, so the actual return value change from -1 to -EFAULT is immaterial. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20211110101325.545019822@infradead.org
* xen: make HYPERVISOR_set_debugreg() always_inlineJuergen Gross2021-11-251-1/+1
| | | | | | | | | | | | HYPERVISOR_set_debugreg() is being called from noinstr code, so it should be attributed "always_inline". Fixes: 7361fac0465ba96ec8f ("x86/xen: Make set_debugreg() noinstr") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20211125092056.24758-3-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen: make HYPERVISOR_get_debugreg() always_inlineJuergen Gross2021-11-251-1/+1
| | | | | | | | | | | | HYPERVISOR_get_debugreg() is being called from noinstr code, so it should be attributed "always_inline". Fixes: f4afb713e5c3a4419ba ("x86/xen: Make get_debugreg() noinstr") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20211125092056.24758-2-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen/pvh: add missing prototype to headerJuergen Gross2021-11-191-0/+1
| | | | | | | | | | | | The prototype of mem_map_via_hcall() is missing in its header, so add it. Reported-by: kernel test robot <lkp@intel.com> Fixes: a43fb7da53007e67ad ("xen/pvh: Move Xen code for getting mem map via hcall out of common file") Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211119153913.21678-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen: allow pv-only hypercalls only with CONFIG_XEN_PVJuergen Gross2021-11-021-109/+102
| | | | | | | | | | | | | | Put the definitions of the hypercalls usable only by pv guests inside CONFIG_XEN_PV sections. On Arm two dummy functions related to pv hypercalls can be removed. While at it remove the no longer supported tmem hypercall definition. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028081221.2475-3-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* x86/xen: remove 32-bit pv leftoversJuergen Gross2021-11-021-31/+9
| | | | | | | | | | There are some remaining 32-bit pv-guest support leftovers in the Xen hypercall interface. Remove them. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028081221.2475-2-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen-pciback: allow compiling on other archs than x86Oleksandr Andrushchenko2021-11-021-19/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xen-pciback driver was designed to be built for x86 only. But it can also be used by other architectures, e.g. Arm. Currently PCI backend implements multiple functionalities at a time, such as: 1. It is used as a database for assignable PCI devices, e.g. xl pci-assignable-{add|remove|list} manipulates that list. So, whenever the toolstack needs to know which PCI devices can be passed through it reads that from the relevant sysfs entries of the pciback. 2. It is used to hold the unbound PCI devices list, e.g. when passing through a PCI device it needs to be unbound from the relevant device driver and bound to pciback (strictly speaking it is not required that the device is bound to pciback, but pciback is again used as a database of the passed through PCI devices, so we can re-bind the devices back to their original drivers when guest domain shuts down) 3. Device reset for the devices being passed through 4. Para-virtualised use-cases support The para-virtualised part of the driver is not always needed as some architectures, e.g. Arm or x86 PVH Dom0, are not using backend-frontend model for PCI device passthrough. For such use-cases make the very first step in splitting the xen-pciback driver into two parts: Xen PCI stub and PCI PV backend drivers. For that add new configuration options CONFIG_XEN_PCI_STUB and CONFIG_XEN_PCIDEV_STUB, so the driver can be limited in its functionality, e.g. no support for para-virtualised scenario. x86 platform will continue using CONFIG_XEN_PCIDEV_BACKEND for the fully featured backend driver. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211028143620.144936-1-andr2000@gmail.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* x86/pvh: add prototype for xen_pvh_init()Juergen Gross2021-11-021-0/+4
| | | | | | | | | | xen_pvh_init() is lacking a prototype in a header, add it. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20211006061950.9227-1-jgross@suse.com Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* Merge tag 'objtool-core-2021-10-31' of ↵Linus Torvalds2021-11-011-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Thomas Gleixner: - Improve retpoline code patching by separating it from alternatives which reduces memory footprint and allows to do better optimizations in the actual runtime patching. - Add proper retpoline support for x86/BPF - Address noinstr warnings in x86/kvm, lockdep and paravirtualization code - Add support to handle pv_opsindirect calls in the noinstr analysis - Classify symbols upfront and cache the result to avoid redundant str*cmp() invocations. - Add a CFI hash to reduce memory consumption which also reduces runtime on a allyesconfig by ~50% - Adjust XEN code to make objtool handling more robust and as a side effect to prevent text fragmentation due to placement of the hypercall page. * tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) bpf,x86: Respect X86_FEATURE_RETPOLINE* bpf,x86: Simplify computing label offsets x86,bugs: Unconditionally allow spectre_v2=retpoline,amd x86/alternative: Add debug prints to apply_retpolines() x86/alternative: Try inline spectre_v2=retpoline,amd x86/alternative: Handle Jcc __x86_indirect_thunk_\reg x86/alternative: Implement .retpoline_sites support x86/retpoline: Create a retpoline thunk array x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h x86/asm: Fixup odd GEN-for-each-reg.h usage x86/asm: Fix register order x86/retpoline: Remove unused replacement symbols objtool,x86: Replace alternatives with .retpoline_sites objtool: Shrink struct instruction objtool: Explicitly avoid self modifying code in .altinstr_replacement objtool: Classify symbols objtool: Support pv_opsindirect calls for noinstr x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays x86/xen: Mark xen_force_evtchn_callback() noinstr x86/xen: Make irq_disable() noinstr ...
| * Merge branch 'objtool/urgent'Peter Zijlstra2021-10-071-5/+1
| |\ | | | | | | | | | | | | | | | | | | Fixup conflicts. # Conflicts: # tools/objtool/check.c
| * | x86/xen: Mark xen_force_evtchn_callback() noinstrPeter Zijlstra2021-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | vmlinux.o: warning: objtool: check_events()+0xd: call to xen_force_evtchn_callback() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210624095148.996055323@infradead.org
| * | x86/xen: Make set_debugreg() noinstrPeter Zijlstra2021-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmlinux.o: warning: objtool: pv_ops[2]: xen_set_debugreg vmlinux.o: warning: objtool: pv_ops[2]: native_set_debugreg vmlinux.o: warning: objtool: exc_debug()+0x3b: call to pv_ops[2]() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210624095148.687755639@infradead.org
| * | x86/xen: Make get_debugreg() noinstrPeter Zijlstra2021-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vmlinux.o: warning: objtool: pv_ops[1]: xen_get_debugreg vmlinux.o: warning: objtool: pv_ops[1]: native_get_debugreg vmlinux.o: warning: objtool: exc_debug()+0x25: call to pv_ops[1]() leaves .noinstr.text section Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20210624095148.625523645@infradead.org
* | | xen/x86: allow PVH Dom0 without XEN_PV=yJan Beulich2021-10-051-4/+7
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0 to a new XEN_PV_DOM0. (I'm not convinced all are really / should really be PV-specific, but for starters I've tried to be conservative.) For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so without x2APIC support enabled in the kernel things aren't going to work very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT as of now.) Note that this then requires PVH Dom0 to be 64-bit, as X86_X2APIC depends on X86_64. In the course of this xen_running_on_version_or_later() needs to be available more broadly. Move it from a PV-specific to a generic file, considering that what it does isn't really PV-specific at all anyway. Note that xen/interface/version.h cannot be included on its own; in enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h first to resolve the apparently sole missing type (xen_ulong_t). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/983bb72f-53df-b6af-14bd-5e088bd06a08@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* | xen/pci-swiotlb: reduce visibility of symbolsJan Beulich2021-09-201-5/+1
|/ | | | | | | | | | | | | xen_swiotlb and pci_xen_swiotlb_init() are only used within the file defining them, so make them static and remove the stubs. Otoh pci_xen_swiotlb_detect() has a use (as function pointer) from the main pci-swiotlb.c file - convert its stub to a #define to NULL. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
* Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"Roger Pau Monne2021-03-251-12/+0
| | | | | | | | | | | | | | | | | | | | | | | This partially reverts commit 882213990d32 ("xen: fix p2m size in dom0 for disabled memory hotplug case") There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order to correctly size the p2m. The generic memory hotplug option has already been tied together with the Xen hotplug limit, so enabling memory hotplug should already trigger a properly sized p2m on Xen PV. Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in MEMORY_HOTPLUG. Leave the check added to __set_phys_to_machine and the adjusted comment about EXTRA_MEM_RATIO. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com [boris: fixed formatting issues] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* xen: fix p2m size in dom0 for disabled memory hotplug caseJuergen Gross2021-03-031-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") foreign mappings are using guest physical addresses allocated via ZONE_DEVICE functionality. This will result in problems for the case of no balloon memory hotplug being configured, as the p2m list will only cover the initial memory size of the domain. Any ZONE_DEVICE allocated address will be outside the p2m range and thus a mapping can't be established with that memory address. Fix that by extending the p2m size for that case. At the same time add a check for a to be created mapping to be within the p2m limits in order to detect errors early. While changing a comment, remove some 32-bit leftovers. This is XSA-369. Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory") Cc: <stable@vger.kernel.org> # 5.9 Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
* xen: add wc_sec_hi to struct shared_infoDavid Woodhouse2021-02-041-0/+3
| | | | | | | | Xen added this in 2015 (Xen 4.6). On x86_64 and Arm it fills what was previously a 32-bit hole in the generic shared_info structure; on i386 it had to go at the end of struct arch_shared_info. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
* xen: remove trailing semicolon in macro definitionTom Rix2020-12-161-1/+1
| | | | | | | | | The macro use will already have a semicolon. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20201127160707.2622061-1-trix@redhat.com Signed-off-by: Juergen Gross <jgross@suse.com>
* xen: hypercall.h: fix duplicated wordRandy Dunlap2020-08-031-1/+1
| | | | | | | | | | | | Change the repeated word "as" to "as a". Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: xen-devel@lists.xenproject.org Link: https://lore.kernel.org/r/20200726001731.19540-1-rdunlap@infradead.org Signed-off-by: Juergen Gross <jgross@suse.com>
* mm: reorder includes after introduction of linux/pgtable.hMike Rapoport2020-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: introduce include/linux/pgtable.hMike Rapoport2020-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport2020-06-091-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2019-11-271-7/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main kernel side changes in this cycle were: - Various Intel-PT updates and optimizations (Alexander Shishkin) - Prohibit kprobes on Xen/KVM emulate prefixes (Masami Hiramatsu) - Add support for LSM and SELinux checks to control access to the perf syscall (Joel Fernandes) - Misc other changes, optimizations, fixes and cleanups - see the shortlog for details. There were numerous tooling changes as well - 254 non-merge commits. Here are the main changes - too many to list in detail: - Enhancements to core tooling infrastructure, perf.data, libperf, libtraceevent, event parsing, vendor events, Intel PT, callchains, BPF support and instruction decoding. - There were updates to the following tools: perf annotate perf diff perf inject perf kvm perf list perf maps perf parse perf probe perf record perf report perf script perf stat perf test perf trace - And a lot of other changes: please see the shortlog and Git log for more details" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (279 commits) perf parse: Fix potential memory leak when handling tracepoint errors perf probe: Fix spelling mistake "addrees" -> "address" libtraceevent: Fix memory leakage in copy_filter_type libtraceevent: Fix header installation perf intel-bts: Does not support AUX area sampling perf intel-pt: Add support for decoding AUX area samples perf intel-pt: Add support for recording AUX area samples perf pmu: When using default config, record which bits of config were changed by the user perf auxtrace: Add support for queuing AUX area samples perf session: Add facility to peek at all events perf auxtrace: Add support for dumping AUX area samples perf inject: Cut AUX area samples perf record: Add aux-sample-size config term perf record: Add support for AUX area sampling perf auxtrace: Add support for AUX area sample recording perf auxtrace: Move perf_evsel__find_pmu() perf record: Add a function to test for kernel support for AUX area sampling perf tools: Add kernel AUX area sampling definitions perf/core: Make the mlock accounting simple again perf report: Jump to symbol source view from total cycles view ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-30 09:27:38 +0100