summaryrefslogtreecommitdiffstats
path: root/arch (follow)
Commit message (Collapse)AuthorAgeFilesLines
* perf: Fix Pentium4 raw event validationStephane Eranian2011-01-271-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes some issues with raw event validation on Pentium 4 (Netburst) based processors. As I was testing libpfm4 Netburst support, I ran into two problems in the p4_validate_raw_event() function: - the shared field must be checked ONLY when HT is on - the binding to ESCR register was missing The second item was causing raw events to not be encoded correctly compared to generic PMU events. With this patch, I can now pass Netburst events to libpfm4 examples and get meaningful results: $ task -e global_power_events:running:u noploop 1 noploop for 1 seconds 3,206,304,898 global_power_events:running Signed-off-by: Stephane Eranian <eranian@google.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: peterz@infradead.org Cc: paulus@samba.org Cc: davem@davemloft.net Cc: fweisbec@gmail.com Cc: perfmon2-devel@lists.sf.net Cc: eranian@gmail.com Cc: robert.richter@amd.com Cc: acme@redhat.com Cc: gorcunov@gmail.com Cc: ming.m.lin@intel.com LKML-Reference: <4d3efb2f.1252d80a.1a80.ffffc83f@mx.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'for-linus' of ↵Linus Torvalds2011-01-261-0/+61
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - pass touch resolution to clients through input_absinfo Input: wacom - add 2 Bamboo Pen and touch models Input: sysrq - ensure sysrq_enabled and __sysrq_enabled are consistent Input: sparse-keymap - fix KEY_VSW handling in sparse_keymap_setup Input: tegra-kbc - add tegra keyboard driver Input: gpio_keys - switch to using request_any_context_irq Input: serio - allow registered drivers to get status flag Input: ct82710c - return proper error code for ct82c710_open Input: bu21013_ts - added regulator support Input: bu21013_ts - remove duplicate resolution parameters Input: tnetv107x-ts - don't treat NULL clk as an error Input: tnetv107x-keypad - don't treat NULL clk as an error Fix up trivial conflicts in drivers/input/keyboard/Makefile due to additions of tc3589x/Tegra drivers
| * Input: tegra-kbc - add tegra keyboard driverRakesh Iyer2011-01-211-0/+61
| | | | | | | | | | | | | | | | | | This patch adds support for the internal matrix keyboard controller for Nvidia Tegra platforms. Signed-off-by: Rakesh Iyer <riyer@nvidia.com> Reviewed-by: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
* | console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn2011-01-264-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | thp: fix PARAVIRT x86 32bit noPAEAndrea Arcangeli2011-01-261-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes TRANSPARENT_HUGEPAGE=y with PARAVIRT=y and HIGHMEM64=n. The #ifdef that this patch removes was erratically introduced to fix a build error for noPAE (where pmd.pmd doesn't exist). So then the kernel built but it failed at runtime because set_pmd_at was a noop. This will correct it by enabling set_pmd_at for noPAE mode too. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: werner <w.landgraf@ru.ru> Reported-by: Minchan Kim <minchan.kim@gmail.com> Tested-by: Minchan Kim <minchan.kim@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-01-269-34/+60
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ALSA: AACI: fix timeout duration ALSA: AACI: fix timeout condition checking ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode ARM: 6637/1: Make the argument to virt_to_phys() "const volatile" ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode ARM: 6635/2: Configure reference clock for Versatile Express timers ARM: versatile: name configuration options after actual board names ARM: realview: name configuration options after actual board names ARM: realview,vexpress: fix section mismatch warning for pen_release ARM: 6632/3: mmci: stop using the blockend interrupts
| * | ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio modeHartley Sweeten2011-01-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The EP93xx C and D GPIO ports are multiplexed with the Keypad Interface peripheral.  At power-up they default into non-GPIO mode with the Key Matrix controller enabled so these ports are unusable for GPIO.  Note that the Keypad Interface peripheral is only available in the EP9307, EP9312, and EP9315 processor variants. The keypad support will clear the DeviceConfig bits appropriately to enable the Keypad Interface when the driver is loaded.  And, when the driver is unloaded it will set the bits to return the ports to GPIO mode. To make these ports available for GPIO after power-up on all EP93xx processor variants, set the KEYS and GONK bits in the DeviceConfig register. Similarly, the E, G, and H ports are multiplexed with the IDE Interface peripheral.  At power-up these also default into non-GPIO mode.  Note that the IDE peripheral is only available in the EP9312 and EP9315 processor variants. Since an IDE driver is not even available in mainline, set the EONIDE, GONIDE, and HONIDE bits in the DeviceConfig register so that these ports will be available for GPIO use after power-up. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6637/1: Make the argument to virt_to_phys() "const volatile"Catalin Marinas2011-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changing the virt_to_phys() argument to "const volatile void *" avoids compiler warnings in some situations where this function is used. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: twd: ensure timer reload is reprogrammed on entry to periodic modeRussell King2011-01-251-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that the twd timer reload value is reprogrammed each time we enter periodic mode. This ensures that the reload value is always reset correctly. Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6635/2: Configure reference clock for Versatile Express timersPawel Moll2011-01-252-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Timers on Versatile Express mainboard are used as system clock/event sources. Driver assumes that they are clocked with 1MHz signal. Old V2M firmware apparently configured it by default, but on newer boards one can observe that "sleep 1" command takes over 30 seconds to finish, as the timers are fed with 32kHz instead... This patch performs required magic and also removes code clearing timer's control registers, as exactly the same operations are performed by the timer driver few jiffies later. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: versatile: name configuration options after actual board namesRussell King2011-01-251-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update the option text to those which appear on the front of the appropriate board user guides. This gives consistent board naming, and makes it obvious which option is for which platform. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: realview: name configuration options after actual board namesRussell King2011-01-251-22/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As no one seems to really know which configuration options tie up with which boards, I thought I'd do some investigation and try to work it out. After discussion with some folk in linaro, I think I have this nailed. The names are updated to use the name on the front of the appropriate board user guide for the various baseboards, which I've taken to be the official name for each board. I haven't significantly updated the descriptions for the tiles as that is even less clear - as far as I can see on ARMs website, there is no Cortex-A9 tile for Realview EB - only ARM11MPCore, ARM1156T2F-S, ARM1176TZF-S and Cortex-R4F. So exactly what this 'Multicore Cortex-A9 Tile' is... Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: realview,vexpress: fix section mismatch warning for pen_releaseRussell King2011-01-252-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix two section mismatch warnings in the platform SMP bringup code for Realview and Versatile Express: WARNING: arch/arm/mach-realview/built-in.o(.text+0x8ac): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. WARNING: arch/arm/mach-vexpress/built-in.o(.text+0x7b4): Section mismatch in reference from the function write_pen_release() to the variable .cpuinit.data:pen_release The function write_pen_release() references the variable __cpuinitdata pen_release. This is often because write_pen_release lacks a __cpuinitdata annotation or the annotation of pen_release is wrong. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2011-01-266-32/+18
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/amiga: Fix "debug=mem" m68k/atari: Rename "scc" to "atari_scc" m68k: Uninline strchr()
| * | | m68k/amiga: Fix "debug=mem"Geert Uytterhoeven2011-01-231-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `debug=mem' on Amiga has been broken for a while. early_param() processing is done very/too early, i.e. before amiga_identify() / amiga_chip_init(), causing amiga_savekmsg_setup() not to find any Chip RAM. As we don't plan to free this memory anyway, just steal it from the initial Chip RAM memory block instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | | m68k/atari: Rename "scc" to "atari_scc"Geert Uytterhoeven2011-01-234-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's a way too generic name for a global #define and conflicts with a variable with the same name, causing build errors like: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary | | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary & | make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1 Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
| * | | m68k: Uninline strchr()Geert Uytterhoeven2011-01-221-12/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some versions of gcc replace calls to strstr() with single-character "needle" string parameters by calls to strchr() behind our back. If strchr() is defined as an inline function, this causes linking errors like ERROR: "strchr" [drivers/target/target_core_mod.ko] undefined! As m68k is the only architecture that has an inline strchr() and this inline version is not an optimized asm version, uninline strchr() and use the standard out-of-line C version in lib/string.c instead. This also decreases the defconfig/allmodconfig kernel image sizes by a few hundred bytes. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
* | | Merge branch 'rmobile-fixes-for-linus' of ↵Linus Torvalds2011-01-268-17/+220
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform data ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bit ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settings ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTP ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3 ARM: mach-shmobile: remove sh7367 on-chip set_irq_type() ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt update ARM: mach-shmobile: ag5evm: Add IrDA support ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rate mmc: sh_mmcif: Convert to __raw_xxx() I/O accessors. ARM: mach-shmobile: ag5evm requires GPIOLIB ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0
| * | | ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform dataMagnus Damm2011-01-203-3/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: sh73a0 CPGA fix for PLL CFG bitMagnus Damm2011-01-201-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PLL1 and PLL2 in the sh73a0 CPGA has a CFG bit that must be taken into account to correctly calculate the frequency. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: mackerel: clarify shdi/mmcif switch settingsSimon Horman2011-01-191-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Pins 2 and 4 of switch 33 are documented as don't care on the PCB, my testing seems to confirm this. * I have been unable to do anything sensible with S1 set to on. Am I missing something with regards to MMC1? * Clarify which driver is needed for each switch setting. * Should the AP4 board code be updated to allow the SHDI driver to access SHDI1 as the mackerel code does? Signed-off-by: Simon Horman <horms@verge.net.au> Acked-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: sh73a0 CPGA fix for IrDA MSTPMagnus Damm2011-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a typo for the sh73a0 CPGA code dealing with the IrDA hardware block on the AG5EVM board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: sh73a0 CPGA fix for FRQCRA M3Magnus Damm2011-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the M3 field offset for the FRQCRA register in the sh73a0 CPGA. It should be 12, not 8. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: remove sh7367 on-chip set_irq_type()Magnus Damm2011-01-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | set_irq_type() should only be used for external IRQ pins, so update the G3EVM board code to remove low level request. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: sh7372 INTCS MFIS2 interrupt updateMagnus Damm2011-01-181-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the MFIS2 interrupt source in the INTCS interrupt controller included in the sh7372 processor. The priority field is constantly enabled to let the interrupt through to both the ARM side and the SH side. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: ag5evm: Add IrDA supportKuninori Morimoto2011-01-182-1/+29
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | ARM: mach-shmobile: clock-sh7372: fixup pllc2 set_rateKuninori Morimoto2011-01-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixup 421b446abeec55bed1251fab80cb5c12be58b773 - Care clk->rate - Don't over write PLLC2 enable bit Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | Merge branch 'common/mmcif' into rmobile-latestPaul Mundt2011-01-1457-598/+1222
| |\ \ \
| * | | | ARM: mach-shmobile: ag5evm requires GPIOLIBYoshii Takashi2011-01-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | ARM: mach-shmobile: fix cpu_base of gic_init() on sh73a0Yoshii Takashi2011-01-131-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest rmobile-latest doesn't run on ag5evm because of a small mistake on initialization. Though, I don't have any idea to write them smart. anyway, On sh73a0, GIC cpu_base is 0xf0000100 but 0xf0001000. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | | Merge branch 'sh-fixes-for-linus' of ↵Linus Torvalds2011-01-269-7/+26
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Fix build of sh7750 base boards sh: update INTC to clear IRQ sense valid flag sh: Fix sh build failure when CONFIG_SFC=m sh: fix MSIOF0 SPI on ecovec: it conflicts with VOU sh: support XZ-compressed kernel. sh: Fix up breakage from asm-generic/pgtable.h changes.
| * | | | | sh: Fix build of sh7750 base boardsNobuhiro Iwamatsu2011-01-251-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Renamed platform_register_device to platform_device_register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | | sh: Fix sh build failure when CONFIG_SFC=mAurelien Jarno2011-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SFC=m uses topology_core_cpumask() which, for sh, expects cpu_core_map to be exported. It is not. This patch exports the needed symbol. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | | sh: fix MSIOF0 SPI on ecovec: it conflicts with VOUGuennadi Liakhovetski2011-01-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MSIOF0 and VOU share pins on sh7724, make MSIOF0 available again, as long as VOU is not configured. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | | sh: support XZ-compressed kernel.Paul Mundt2011-01-145-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Follow the x86 change and wire up support for the XZ decompressor. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
| * | | | | sh: Fix up breakage from asm-generic/pgtable.h changes.Paul Mundt2011-01-141-0/+1
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We require a forward declaration for mm_struct: In file included from arch/sh/include/asm/pgtable.h:163, from arch/sh/include/asm/io.h:21, from arch/sh/kernel/machvec.c:20: include/asm-generic/pgtable.h:104: error: 'struct mm_struct' declared inside parameter list include/asm-generic/pgtable.h: In function 'ptep_get_and_clear_full': include/asm-generic/pgtable.h:107: error: passing argument 1 of 'ptep_get_and_clear' from incompatible pointer type include/asm-generic/pgtable.h:70: note: expected 'struct mm_struct *' but argument is of type 'struct mm_struct *' Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | | | | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2011-01-2415-51/+184
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: DMA: clear interrupt status correctly OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration arm: omap3: cm-t3517: minor comment fix arm: omap3: cm-t3517: rtc fix omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used omap1: Fix booting for 15xx and 730 with omap1_defconfig omap1: Fix sched_clock for the MPU timer OMAP: PRCM: remove duplicated headers OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4 OMAP: counter_32k: init clocksource as part of machine timer init
| * | | | | omap: DMA: clear interrupt status correctlyAdrian Hunter2011-01-191-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When clearing the DMA channel, clear all status bits. When handling a DMA interrupt, clear only the interrupt status bits that have been read and are passed to the channel's interrupt handler, not every status bit. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: G, Manjunath Kondaiah <manjugk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configurationDaniel Morsing2011-01-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpio7 on the tps65930 is used as an output on the devkit8000 and gpio1 is not connected. Remove gpio7 and change gpio1 to pulldown Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | arm: omap3: cm-t3517: minor comment fixIgor Grinberg2011-01-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | offsets in the comment were wrong - fix this. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | arm: omap3: cm-t3517: rtc fixIgor Grinberg2011-01-191-3/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix rtc gpios and mux Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap1: Fix sched_clock implementation when both MPU timer and 32K timer are usedTony Lindgren2011-01-193-2/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier patches select HAVE_SCHED_CLOCK for omaps. To have working sched_clock also for MPU timer, we need to implement it in a way where the right one gets selected during the runtime. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap1: Fix booting for 15xx and 730 with omap1_defconfigTony Lindgren2011-01-197-33/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For omap15xx and 730 we need to use the MPU timer as the 32K timer is not available. For omap16xx we want to use the 32K timer because of PM. Fix this by allowing to build in both timers. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | omap1: Fix sched_clock for the MPU timerTony Lindgren2011-01-181-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise systems using the MPU timer will hang. Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | | Merge branch 'fixes_a_2.6.38rc' of git://git.pwsan.com/linux-2.6 into omap-fixesTony Lindgren2011-01-188-12/+43
| |\ \ \ \ \
| | * | | | | OMAP: PRCM: remove duplicated headersFelipe Balbi2011-01-183-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few headers are included twice, remove them. Found the following errors using make includecheck: arch/arm/mach-omap2/clock44xx_data.c: prm44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm1_44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm2_44xx.h is included more than once. arch/arm/mach-omap2/powerdomain2xxx_3xxx.c: prm-regbits-34xx.h is included more than once. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> [paul@pwsan.com: dropped lists from patch cc:s; tweaked subject line] Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * | | | | OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4Paul Walmsley2011-01-181-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 56a6a19dffda6b75cef8d4183c7c6ff650025cbd ("omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'") generates a lot of warnings on boot since clockdomain functions that manipulate wake-up dependencies are not implemented yet on OMAP4 for 2.6.38. This patch bypasses the OMAP2/3 functions on OMAP4, which in turn avoids the warnings when the functions would attempt to call the underlying OMAP2/3 PRCM functions. A one-line warning is still logged from the clockdomain code that the OMAP4 wake-up dependency code is not yet implemented. A clockdomain wake-up and sleep dependency implementation for OMAP4 from Rajendra should be possible to merge during the 2.6.39 merge window: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg41748.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42222.html Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
| | * | | | | OMAP: counter_32k: init clocksource as part of machine timer initPaul Walmsley2011-01-184-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit dc548fbbd2ecd0fc3b02301d551e5f8e19ae58fd ("ARM: omap: convert sched_clock() to use new infrastructure"), OMAPs that use the 32KiHz "synchronization timer" as their clocksource crash during boot: [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Tainted: G W (2.6.37-07734-g2467802 #7) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c [ 0.000000] pc : [<00000000>] lr : [<c0060b74>] psr: 600001d3 [ 0.000000] sp : c058bfd0 ip : c058a000 fp : 00000000 [ 0.000000] r10: 00000000 r9 : 411fc092 r8 : 800330c8 [ 0.000000] r7 : c05a08e0 r6 : c0034c48 r5 : c05ffc40 r4 : c0034c4c [ 0.000000] r3 : c05ffe6c r2 : c05a0bc0 r1 : c059f098 r0 : 00000000 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7f Table: 8000404a DAC: 00000017 This is due to the recent ARM init_sched_clock() changes and the late initialization of the counter_32k clock source. More information here: http://marc.info/?l=linux-omap&m=129513468605208&w=2 Fix by initializing the counter_32k clocksource during the machine timer initialization. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Thomas Weber <weber@corscience.de> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | | | | | | Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds2011-01-241-0/+1
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Fix time function double declaration with glibc perf tools: Fix build by checking if extra warnings are supported perf tools: Fix build when using gcc 3.4.6 perf tools: Add missing header, fixes build perf tools: Fix 64 bit integer format strings perf test: Fix build on older glibcs perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/ perf test: Use cpu_map->[cpu] when setting affinity perf symbols: Fix annotation of thumb code perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat powerpc, perf: Fix frequency calculation for overflowing counters (FSL version) perf: Fix perf_event_init_task()/perf_event_free_task() interaction perf: Fix find_get_context() vs perf_event_exit_task() race
| * | | | | | | powerpc, perf: Fix frequency calculation for overflowing counters (FSL version)Anton Blanchard2011-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When fixing the frequency calculations for perf on powerpc I forgot to fix the FSL version. If we dont set event->hw.last_period the frequency to period calculations in perf go haywire and we continually throttle/unthrottle the PMU. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Scott Wood <scottwood@freescale.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: linuxppc-dev@lists.ozlabs.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <20110118214404.2f42e634@kryten> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-24 15:54:09 +0100