summaryrefslogtreecommitdiffstats
path: root/arch (follow)
Commit message (Collapse)AuthorAgeFilesLines
* KVM: fix spectrev1 gadgetsPaolo Bonzini2019-04-161-1/+3
| | | | | | These were found with smatch, and then generalized when applicable. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: fix warning Using plain integer as NULL pointerHariprasad Kelam2019-04-161-1/+1
| | | | | | | | | Changed passing argument as "0 to NULL" which resolves below sparse warning arch/x86/kvm/x86.c:3096:61: warning: Using plain integer as NULL pointer Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: Always use 32-bit SMRAM save state for 32-bit kernelsSean Christopherson2019-04-162-4/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Invoking the 64-bit variation on a 32-bit kenrel will crash the guest, trigger a WARN, and/or lead to a buffer overrun in the host, e.g. rsm_load_state_64() writes r8-r15 unconditionally, but enum kvm_reg and thus x86_emulate_ctxt._regs only define r8-r15 for CONFIG_X86_64. KVM allows userspace to report long mode support via CPUID, even though the guest is all but guaranteed to crash if it actually tries to enable long mode. But, a pure 32-bit guest that is ignorant of long mode will happily plod along. SMM complicates things as 64-bit CPUs use a different SMRAM save state area. KVM handles this correctly for 64-bit kernels, e.g. uses the legacy save state map if userspace has hid long mode from the guest, but doesn't fare well when userspace reports long mode support on a 32-bit host kernel (32-bit KVM doesn't support 64-bit guests). Since the alternative is to crash the guest, e.g. by not loading state or explicitly requesting shutdown, unconditionally use the legacy SMRAM save state map for 32-bit KVM. If a guest has managed to get far enough to handle SMIs when running under a weird/buggy userspace hypervisor, then don't deliberately crash the guest since there are no downsides (from KVM's perspective) to allow it to continue running. Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: Don't clear EFER during SMM transitions for 32-bit vCPUSean Christopherson2019-04-161-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | Neither AMD nor Intel CPUs have an EFER field in the legacy SMRAM save state area, i.e. don't save/restore EFER across SMM transitions. KVM somewhat models this, e.g. doesn't clear EFER on entry to SMM if the guest doesn't support long mode. But during RSM, KVM unconditionally clears EFER so that it can get back to pure 32-bit mode in order to start loading CRs with their actual non-SMM values. Clear EFER only when it will be written when loading the non-SMM state so as to preserve bits that can theoretically be set on 32-bit vCPUs, e.g. KVM always emulates EFER_SCE. And because CR4.PAE is cleared only to play nice with EFER, wrap that code in the long mode check as well. Note, this may result in a compiler warning about cr4 being consumed uninitialized. Re-read CR4 even though it's technically unnecessary, as doing so allows for more readable code and RSM emulation is not a performance critical path. Fixes: 660a5d517aaab ("KVM: x86: save/load state on SMM switch") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: clear SMM flags before loading state while leaving SMMSean Christopherson2019-04-163-16/+10
| | | | | | | | | | | | | | | | | RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Stop dancing around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, e.g. by toggling it for problematic flows, and simply clear HF_SMM_MASK prior to loading architectural state (from SMRAM save state area). Reported-by: Jon Doron <arilou@gmail.com> Cc: Jim Mattson <jmattson@google.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Fixes: 5bea5123cbf0 ("KVM: VMX: check nested state and CR4.VMXE against SMM") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: Open code kvm_set_hflagsSean Christopherson2019-04-163-18/+19
| | | | | | | | | | Prepare for clearing HF_SMM_MASK prior to loading state from the SMRAM save state map, i.e. kvm_smm_changed() needs to be called after state has been loaded and so cannot be done automatically when setting hflags from RSM. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: Load SMRAM in a single shot when leaving SMMSean Christopherson2019-04-166-92/+92
| | | | | | | | | | | | | | | | | | | | | | RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Rather than dance around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, ideally RSM emulation itself would be reworked to clear HF_SMM_MASK prior to loading non-SMM architectural state. Ostensibly, the only motivation for having HF_SMM_MASK set throughout the loading of state from the SMRAM save state area is so that the memory accesses from GET_SMSTATE() are tagged with role.smm. Load all of the SMRAM save state area from guest memory at the beginning of RSM emulation, and load state from the buffer instead of reading guest memory one-by-one. This paves the way for clearing HF_SMM_MASK prior to loading state, and also aligns RSM with the enter_smm() behavior, which fills a buffer and writes SMRAM save state in a single go. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: nVMX: Expose RDPMC-exiting only when guest supports PMULiran Alon2019-04-161-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue was discovered when running kvm-unit-tests on KVM running as L1 on top of Hyper-V. When vmx_instruction_intercept unit-test attempts to run RDPMC to test RDPMC-exiting, it is intercepted by L1 KVM which it's EXIT_REASON_RDPMC handler raise #GP because vCPU exposed by Hyper-V doesn't support PMU. Instead of unit-test expectation to be reflected with EXIT_REASON_RDPMC. The reason vmx_instruction_intercept unit-test attempts to run RDPMC even though Hyper-V doesn't support PMU is because L1 expose to L2 support for RDPMC-exiting. Which is reasonable to assume that is supported only in case CPU supports PMU to being with. Above issue can easily be simulated by modifying vmx_instruction_intercept config in x86/unittests.cfg to run QEMU with "-cpu host,+vmx,-pmu" and run unit-test. To handle issue, change KVM to expose RDPMC-exiting only when guest supports PMU. Reported-by: Saar Amar <saaramar@microsoft.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: Raise #GP when guest vCPU do not support PMULiran Alon2019-04-161-0/+4
| | | | | | | | | | Before this change, reading a VMware pseduo PMC will succeed even when PMU is not supported by guest. This can easily be seen by running kvm-unit-test vmware_backdoors with "-cpu host,-pmu" option. Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* x86/kvm: move kvm_load/put_guest_xcr0 into atomic contextWANG Chao2019-04-164-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | guest xcr0 could leak into host when MCE happens in guest mode. Because do_machine_check() could schedule out at a few places. For example: kvm_load_guest_xcr0 ... kvm_x86_ops->run(vcpu) { vmx_vcpu_run vmx_complete_atomic_exit kvm_machine_check do_machine_check do_memory_failure memory_failure lock_page In this case, host_xcr0 is 0x2ff, guest vcpu xcr0 is 0xff. After schedule out, host cpu has guest xcr0 loaded (0xff). In __switch_to { switch_fpu_finish copy_kernel_to_fpregs XRSTORS If any bit i in XSTATE_BV[i] == 1 and xcr0[i] == 0, XRSTORS will generate #GP (In this case, bit 9). Then ex_handler_fprestore kicks in and tries to reinitialize fpu by restoring init fpu state. Same story as last #GP, except we get DOUBLE FAULT this time. Cc: stable@vger.kernel.org Signed-off-by: WANG Chao <chao.wang@ucloud.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86: svm: make sure NMI is injected after nmi_singlestepVitaly Kuznetsov2019-04-161-0/+3
| | | | | | | | | | | | | | | | | | | I noticed that apic test from kvm-unit-tests always hangs on my EPYC 7401P, the hanging test nmi-after-sti is trying to deliver 30000 NMIs and tracing shows that we're sometimes able to deliver a few but never all. When we're trying to inject an NMI we may fail to do so immediately for various reasons, however, we still need to inject it so enable_nmi_window() arms nmi_singlestep mode. #DB occurs as expected, but we're not checking for pending NMIs before entering the guest and unless there's a different event to process, the NMI will never get delivered. Make KVM_REQ_EVENT request on the vCPU from db_interception() to make sure pending NMIs are checked and possibly injected. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* svm/avic: Fix invalidate logical APIC id entrySuthikulpanit, Suravee2019-04-161-1/+2
| | | | | | | | | | | Only clear the valid bit when invalidate logical APIC id entry. The current logic clear the valid bit, but also set the rest of the bits (including reserved bits) to 1. Fixes: 98d90582be2e ('svm: Fix AVIC DFR and LDR handling') Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Revert "svm: Fix AVIC incomplete IPI emulation"Suthikulpanit, Suravee2019-04-161-4/+15
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit bb218fbcfaaa3b115d4cd7a43c0ca164f3a96e57. As Oren Twaig pointed out the old discussion: https://patchwork.kernel.org/patch/8292231/ that the change coud potentially cause an extra IPI to be sent to the destination vcpu because the AVIC hardware already set the IRR bit before the incomplete IPI #VMEXIT with id=1 (target vcpu is not running). Since writting to ICR and ICR2 will also set the IRR. If something triggers the destination vcpu to get scheduled before the emulation finishes, then this could result in an additional IPI. Also, the issue mentioned in the commit bb218fbcfaaa was misdiagnosed. Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Oren Twaig <oren@scalemp.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* kvm: mmu: Fix overflow on kvm mmu page limit calculationBen Gardon2019-04-164-16/+15
| | | | | | | | | | | | | | | | | KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults. Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: nVMX: always use early vmcs check when EPT is disabledPaolo Bonzini2019-04-162-2/+21
| | | | | | | | | | | | | | The remaining failures of vmx.flat when EPT is disabled are caused by incorrectly reflecting VMfails to the L1 hypervisor. What happens is that nested_vmx_restore_host_state corrupts the guest CR3, reloading it with the host's shadow CR3 instead, because it blindly loads GUEST_CR3 from the vmcs01. For simplicity let's just always use hardware VMCS checks when EPT is disabled. This way, nested_vmx_restore_host_state is not reached at all (or at least shouldn't be reached). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: nVMX: allow tests to use bad virtual-APIC page addressPaolo Bonzini2019-04-163-10/+19
| | | | | | | | As mentioned in the comment, there are some special cases where we can simply clear the TPR shadow bit from the CPU-based execution controls in the vmcs02. Handle them so that we can remove some XFAILs from vmx.flat. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* KVM: x86/mmu: Fix an inverted list_empty() check when zapping sptesSean Christopherson2019-04-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recently introduced helper for handling zap vs. remote flush incorrectly bails early, effectively leaking defunct shadow pages. Manifests as a slab BUG when exiting KVM due to the shadow pages being alive when their associated cache is destroyed. ========================================================================== BUG kvm_mmu_page_header: Objects remaining in kvm_mmu_page_header on ... -------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Slab 0x00000000fc436387 objects=26 used=23 fp=0x00000000d023caee ... CPU: 6 PID: 4315 Comm: rmmod Tainted: G B 5.1.0-rc2+ #19 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Call Trace: dump_stack+0x46/0x5b slab_err+0xad/0xd0 ? on_each_cpu_mask+0x3c/0x50 ? ksm_migrate_page+0x60/0x60 ? on_each_cpu_cond_mask+0x7c/0xa0 ? __kmalloc+0x1ca/0x1e0 __kmem_cache_shutdown+0x13a/0x310 shutdown_cache+0xf/0x130 kmem_cache_destroy+0x1d5/0x200 kvm_mmu_module_exit+0xa/0x30 [kvm] kvm_arch_exit+0x45/0x60 [kvm] kvm_exit+0x6f/0x80 [kvm] vmx_exit+0x1a/0x50 [kvm_intel] __x64_sys_delete_module+0x153/0x1f0 ? exit_to_usermode_loop+0x88/0xc0 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a21136345cb6f ("KVM: x86/mmu: Split remote_flush+zap case out of kvm_mmu_flush_or_zap()") Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Merge tag 'mips_fixes_5.1_2' of ↵Linus Torvalds2019-04-103-3/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few minor MIPS fixes: - Provide struct pt_regs * from get_irq_regs() to kgdb_nmicallback() when handling an IPI triggered by kgdb_roundup_cpus(), matching the behavior of other architectures & resolving kgdb issues for SMP systems. - Defer a pointer dereference until after a NULL check in the irq_shutdown callback for SGI IP27 HUB interrupts. - A defconfig update for the MSCC Ocelot to enable some necessary drivers" * tag 'mips_fixes_5.1_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfig MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irq MIPS: KGDB: fix kgdb support for SMP platforms.
| * MIPS: generic: Add switchdev, pinctrl and fit to ocelot_defconfigHoratiu Vultur2019-04-041-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the configuration were not selected by default anymore, therefore enable them again. Also remove some configs which are used for MSCC Ocelot. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: <alexandre.belloni@bootlin.com> Cc: <UNGLinuxDriver@microchip.com> Cc: <ralf@linux-mips.org> Cc: <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: <linux-kernel@vger.kernel.org>
| * MIPS: SGI-IP27: Fix use of unchecked pointer in shutdown_bridge_irqThomas Bogendoerfer2019-03-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smatch complaint: arch/mips/sgi-ip27/ip27-irq.c:123 shutdown_bridge_irq() warn: variable dereferenced before check 'hd' (see line 121) Fix it by removing local variable and use hd->pin directly. Fixes: 69a07a41d908 ("MIPS: SGI-IP27: rework HUB interrupts") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org
| * MIPS: KGDB: fix kgdb support for SMP platforms.Chong Qiao2019-03-281-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KGDB_call_nmi_hook is called by other cpu through smp call. MIPS smp call is processed in ipi irq handler and regs is saved in handle_int. So kgdb_call_nmi_hook get regs by get_irq_regs and regs will be passed to kgdb_cpu_enter. Signed-off-by: Chong Qiao <qiaochong@loongson.cn> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: QiaoChong <qiaochong@loongson.cn>
* | Merge tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2019-04-094-11/+24
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull xtensa fixes from Max Filippov: - fix syscall number passed to trace_sys_exit - fix syscall number initialization in start_thread - fix level interpretation in the return_address - fix format string warning in init_pmd * tag 'xtensa-20190408' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: fix format string warning in init_pmd xtensa: fix return_address xtensa: fix initialization of pt_regs::syscall in start_thread xtensa: use actual syscall number in do_syscall_trace_leave
| * | xtensa: fix format string warning in init_pmdMax Filippov2019-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Use %lu instead of %zu to fix the following warning introduced with recent memblock refactoring: xtensa/mm/mmu.c:36:9: warning: format '%zu' expects argument of type 'size_t', but argument 3 has type 'long unsigned int Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * | xtensa: fix return_addressMax Filippov2019-04-041-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | return_address returns the address that is one level higher in the call stack than requested in its argument, because level 0 corresponds to its caller's return address. Use requested level as the number of stack frames to skip. This fixes the address reported by might_sleep and friends. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * | xtensa: fix initialization of pt_regs::syscall in start_threadMax Filippov2019-04-041-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | New pt_regs should indicate that there's no syscall, not that there's syscall #0. While at it wrap macro body in do/while and parenthesize macro arguments. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
| * | xtensa: use actual syscall number in do_syscall_trace_leaveMax Filippov2019-04-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Syscall may alter pt_regs structure passed to it, resulting in a mismatch between syscall entry end syscall exit entries in the ftrace. Temporary restore syscall field of the pt_regs for the duration of do_syscall_trace_leave. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* | | Merge tag 'armsoc-fixes' of ↵Linus Torvalds2019-04-0821-80/+125
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "A collection of fixes from the last few weeks. Most of them are smaller tweaks and fixes to DT and hardware descriptions for boards. Some of the more significant ones are: - eMMC and RGMII stability tweaks for rk3288 - DDC fixes for Rock PI 4 - Audio fixes for two TI am335x eval boards - D_CAN clock fix for am335x - Compilation fixes for clang - !HOTPLUG_CPU compilation fix for one of the new platforms this release (milbeaut) - A revert of a gpio fix for nomadik that instead was fixed in the gpio subsystem - Whitespace fix for the DT JSON schema (no tabs allowed)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits) ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPU ARM: iop: don't use using 64-bit DMA masks ARM: orion: don't use using 64-bit DMA masks Revert "ARM: dts: nomadik: Fix polarity of SPI CS" dt-bindings: cpu: Fix JSON schema arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 ARM: dts: Fix dcan clkctrl clock for am3 reset: meson-audio-arb: Fix missing .owner setting of reset_controller_dev dt-bindings: reset: meson-g12a: Add missing USB2 PHY resets ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi ARM: dts: rockchip: Fix gpu opp node names for rk3288 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation arm64: dts: stratix10: add the sysmgr-syscon property from the gmac's arm64: dts: rockchip: fix rk3328 sdmmc0 write errors arm64: dts: rockchip: fix rk3328 rgmii high tx error rate ...
| * | | ARM: milbeaut: fix build with !CONFIG_HOTPLUG_CPUArnd Bergmann2019-04-081-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When HOTPLUG_CPU is disabled, some fields in the smp operations are not available or needed: arch/arm/mach-milbeaut/platsmp.c:90:3: error: field designator 'cpu_die' does not refer to any field in type 'struct smp_operations' .cpu_die = m10v_cpu_die, ^ arch/arm/mach-milbeaut/platsmp.c:91:3: error: field designator 'cpu_kill' does not refer to any field in type 'struct smp_operations' .cpu_kill = m10v_cpu_kill, ^ Hide them in an #ifdef like the other platforms do. Fixes: 9fb29c734f9e ("ARM: milbeaut: Add basic support for Milbeaut m10v SoC") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: iop: don't use using 64-bit DMA masksArnd Bergmann2019-04-083-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | ARM: orion: don't use using 64-bit DMA masksArnd Bergmann2019-04-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow] .coherent_dma_mask = DMA_BIT_MASK(64), ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Revert "ARM: dts: nomadik: Fix polarity of SPI CS"Olof Johansson2019-04-081-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit fa9463564e77067df81b0b8dec91adbbbc47bfb4. Per Linus Walleij: Dear ARM SoC maintainers, can you please revert this patch. It was the wrong solution to the wrong problem, and I must have acted in stress. Andrey fixed the real bug in a proper way in these commits: commit e5545c94e43b8f6599ffc01df8d1aedf18ee912a "gpio: of: Check propname before applying "cs-gpios" quirks" commit 7ce40277bf848391705011ba37eac2e377cbd9e6 "gpio: of: Check for "spi-cs-high" in child instead of parent node" Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | Merge tag 'omap-for-v5.1/fixes-signed' of ↵Olof Johansson2019-04-085-11/+51
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.1-rc cycle Few small fixes for omap variants: - Fix ams-delta gpio IDs - Add missing of_node_put for omapdss platform init code - Fix unconfigured audio regulators for two am335x boards - Fix use of wrong offset for am335x d_can clocks * tag 'omap-for-v5.1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix dcan clkctrl clock for am3 ARM: dts: am335x-evmsk: Correct the regulators for the audio codec ARM: dts: am335x-evm: Correct the regulators for the audio codec ARM: OMAP2+: add missing of_node_put after of_device_is_available ARM: OMAP1: ams-delta: Fix broken GPIO ID allocation Signed-off-by: Olof Johansson <olof@lixom.net>
| | * \ \ Merge commit '7d56bedb2730dc2ea8abf0fd7240ee99ecfee3c9' into omap-for-v5.1/fixesTony Lindgren2019-04-011-2/+2
| | |\ \ \
| | | * | | ARM: dts: Fix dcan clkctrl clock for am3Tony Lindgren2019-03-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We must not use legacy clock defines for dts clckctrl clocks as the offsets will be wrong. Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: am335x-evmsk: Correct the regulators for the audio codecPeter Ujfalusi2019-03-221-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: dts: am335x-evm: Correct the regulators for the audio codecPeter Ujfalusi2019-03-221-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correctly map the regulators used by tlv320aic3106. Both 1.8V and 3.3V for the codec is derived from VBAT via fixed regulators. Cc: <Stable@vger.kernel.org> # v4.14+ Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: OMAP2+: add missing of_node_put after of_device_is_availableJulia Lawall2019-03-221-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an of_node_put when a tested device node is not available. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ identifier f; local idexpression e; expression x; @@ e = f(...); ... when != of_node_put(e) when != x = e when != e = x when any if (<+...of_device_is_available(e)...+>) { ... when != of_node_put(e) ( return e; | + of_node_put(e); return ...; ) } // </smpl> Fixes: e0c827aca0730 ("drm/omap: Populate DSS children in omapdss driver") Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | | | ARM: OMAP1: ams-delta: Fix broken GPIO ID allocationJanusz Krzysztofik2019-03-221-0/+2
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to request dynamic allocationn of GPIO IDs, a negative number should be passed as a base GPIO ID via platform data. Unfortuntely, commit 771e53c4d1a1 ("ARM: OMAP1: ams-delta: Drop board specific global GPIO numbers") didn't follow that rule while switching to dynamically allocated GPIO IDs for Amstrad Delta latches, making their IDs overlapping with those already assigned to OMAP GPIO devices. Fix it. Fixes: 771e53c4d1a1 ("ARM: OMAP1: ams-delta: Drop board specific global GPIO numbers") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: stable@vger.kernel.org Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | | | Merge tag 'at91-5.1-fixes' of ↵Olof Johansson2019-04-082-3/+5
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.1 - fix a typo in sama5d2 pinmuxing which concerns the ISC data 0 signal - fix a kobject reference leak * tag 'at91-5.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: arm/mach-at91/pm : fix possible object reference leak ARM: dts: at91: Fix typo in ISC_D0 on PC9 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | arm/mach-at91/pm : fix possible object reference leakPeng Hao2019-04-041-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device. When returning error we should call put_device. Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
| | * | | | ARM: dts: at91: Fix typo in ISC_D0 on PC9David Engraf2019-03-281-1/+1
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function argument for the ISC_D0 on PC9 was incorrect. According to the documentation it should be 'C' aka 3. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Fixes: 7f16cb676c00 ("ARM: at91/dt: add sama5d2 pinmux") Cc: <stable@vger.kernel.org> # v4.4+
| * | | | Merge tag 'v5.1-rockchip-dtfixes-1' of ↵Olof Johansson2019-04-087-47/+44
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes for dtc warnings, fixes for ethernet transfers on rk3328, sd-card related fixes on both rk3328 ans rk3288-tinker and a regulator fix on rock64 and making ddc actually work on the Rock PI 4 due to missing the ddc bus. * tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi ARM: dts: rockchip: Fix gpu opp node names for rk3288 arm64: dts: rockchip: fix rk3328 sdmmc0 write errors arm64: dts: rockchip: fix rk3328 rgmii high tx error rate ARM: dts: rockchip: Fix SD card detection on rk3288-tinker arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64 ARM: dts: rockchip: fix rk3288 cpu opp node reference arm64: dts: rockchip: add DDC bus on Rock Pi 4 arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keysDouglas Anderson2019-03-251-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They are pointless. As dtc points out: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Let's remove them. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsiDouglas Anderson2019-03-251-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They are pointless. As dtc points out: Warning (avoid_unnecessary_addr_size): /mipi@ff960000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property Let's remove them. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | ARM: dts: rockchip: Fix gpu opp node names for rk3288Douglas Anderson2019-03-251-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device tree compiler yells like this: Warning (unit_address_vs_reg): /gpu-opp-table/opp@100000000: node has a unit name, but no reg property Let's match the cpu opp node names and use a dash. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | arm64: dts: rockchip: fix rk3328 sdmmc0 write errorsPeter Geis2019-03-181-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various rk3328 based boards experience occasional sdmmc0 write errors. This is due to the rk3328.dtsi tx drive levels being set to 4ma, vs 8ma per the rk3328 datasheet default settings. Fix this by setting the tx signal pins to 8ma. Inspiration from tonymac32's patch, https://github.com/ayufan-rock64/linux-kernel/commit/dc1212b347e0da17c5460bcc0a56b07d02bac3f8 Fixes issues on the rk3328-roc-cc and the rk3328-rock64 (as per the above commit message). Tested on the rk3328-roc-cc board. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | arm64: dts: rockchip: fix rk3328 rgmii high tx error ratePeter Geis2019-03-181-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several rk3328 based boards experience high rgmii tx error rates. This is due to several pins in the rk3328.dtsi rgmii pinmux that are missing a defined pull strength setting. This causes the pinmux driver to default to 2ma (bit mask 00). These pins are only defined in the rk3328.dtsi, and are not listed in the rk3328 specification. The TRM only lists them as "Reserved" (RK3328 TRM V1.1, 3.3.3 Detail Register Description, GRF_GPIO0B_IOMUX, GRF_GPIO0C_IOMUX, GRF_GPIO0D_IOMUX). However, removal of these pins from the rgmii pinmux definition causes the interface to fail to transmit. Also, the rgmii tx and rx pins defined in the dtsi are not consistent with the rk3328 specification, with tx pins currently set to 12ma and rx pins set to 2ma. Fix this by setting tx pins to 8ma and the rx pins to 4ma, consistent with the specification. Defining the drive strength for the undefined pins eliminated the high tx packet error rate observed under heavy data transfers. Aligning the drive strength to the TRM values eliminated the occasional packet retry errors under iperf3 testing. This allows much higher data rates with no recorded tx errors. Tested on the rk3328-roc-cc board. Fixes: 52e02d377a72 ("arm64: dts: rockchip: add core dtsi file for RK3328 SoCs") Cc: stable@vger.kernel.org Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | ARM: dts: rockchip: Fix SD card detection on rk3288-tinkerDavid Summers2019-03-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Problem: On ASUS Tinker Board S, when booting from the eMMC, and there is card in the sd slot, there are constant errors. Also when warm reboot, uboot can not access the sd slot Cause: Identified by Robin Murphy @ ARM. The Card Detect on rk3288 devices is pulled up by vccio-sd; so when the regulator powers this off, card detect gives spurious errors. A second problem, is during power down, vccio-sd apprears to be powered down. This causes a problem when warm rebooting from the sd card. This was identified by Jonas Karlman. History: A common fault on these rk3288 board, which impliment the reference design. When this arose before: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-August/281153.html And Ulf and Jaehoon clearly said this was a broken card detect design, which should be solved via polling Solution: Hence broken-cd is set as a property. This cures the errors. The powering down of vccio-sd during reboot is cured by adding regulator-boot-on. This solutions has been fairly widely reviewed and tested. Fixes: e58c5e739d6f ("ARM: dts: rockchip: move shared tinker-board nodes to a common dtsi") Cc: stable@vger.kernel.org [Heiko: slightly inaccurate fixes but tinker is a sbc (aka like a Pi) where we can hopefully expect people not to rely on overly old stable kernels] Signed-off-by: David Summers <beagleboard@davidjohnsummers.uk> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64Tomohiro Mayama2019-03-181-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes USB ports functioning again. Fixes: 955bebde057e ("arm64: dts: rockchip: add rk3328-rock64 board") Cc: stable@vger.kernel.org Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Tomohiro Mayama <parly-gh@iris.mystia.org> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * | | | ARM: dts: rockchip: fix rk3288 cpu opp node referenceJonas Karlman2019-03-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following error can be seen during boot: of: /cpus/cpu@501: Couldn't find opp node Change cpu nodes to use operating-points-v2 in order to fix this. Fixes: ce76de984649 ("ARM: dts: rockchip: convert rk3288 to operating-points-v2") Cc: stable@vger.kernel.org Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-29 03:47:53 +0100