summaryrefslogtreecommitdiffstats
path: root/drivers/md/raid1.c (unfollow)
Commit message (Collapse)AuthorFilesLines
2020-10-08dm: remove special-casing of bio-based immutable singleton target on NVMeMike Snitzer3-81/+7
Since commit 5a6c35f9af416 ("block: remove direct_make_request") there is no benefit to DM special-casing NVMe. Remove all code used to establish DM_TYPE_NVME_BIO_BASED. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-01dm: export dm_copy_name_and_uuidMike Snitzer2-3/+3
Allow DM targets to access the configured name and uuid. Also, bump DM ioctl version. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-01dm: fix comment in __dm_suspend()Mike Snitzer1-5/+4
Fix stale references to functions that have been renamed and fix typo. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-10-01dm: fold dm_process_bio() into dm_submit_bio()Mike Snitzer1-30/+22
dm_process_bio() is only called by dm_submit_bio(), there is no benefit to keeping dm_process_bio() factored out, so fold it. While at it, cleanup dm_submit_bio()'s DMF_BLOCK_IO_FOR_SUSPEND related branching and expand scope of dm_get_live_table() rcu reference on map via common 'out' label to dm_put_live_table(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-30dm: fix missing imposition of queue_limits from dm_wq_work() threadMike Snitzer1-25/+9
If a DM device was suspended when bios were issued to it, those bios would be deferred using queue_io(). Once the DM device was resumed dm_process_bio() could be called by dm_wq_work() for original bio that still needs splitting. dm_process_bio()'s check for current->bio_list (meaning call chain is within ->submit_bio) as a prerequisite for calling blk_queue_split() for "abnormal IO" would result in dm_process_bio() never imposing corresponding queue_limits (e.g. discard_granularity, discard_max_bytes, etc). Fix this by always having dm_wq_work() resubmit deferred bios using submit_bio_noacct(). Side-effect is blk_queue_split() is always called for "abnormal IO" from ->submit_bio, be it from application thread or dm_wq_work() workqueue, so proper bio splitting and depth-first bio submission is performed. For sake of clarity, remove current->bio_list check before call to blk_queue_split(). Also, remove dm_wq_work()'s use of dm_{get,put}_live_table() -- no longer needed since IO will be reissued in terms of ->submit_bio. And rename bio variable from 'c' to 'bio'. Fixes: cf9c37865557 ("dm: fix comment in dm_process_bio()") Reported-by: Jeffle Xu <jefflexu@linux.alibaba.com> Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm snap persistent: simplify area_io()Qinglang Miao1-9/+2
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm thin metadata: Remove unused local variable when create thin and snapHuaisheng Ye2-5/+4
The local variable disk details is not used during the creating of thin & snap devices. Remove them from dm-thin-metadata, and add pointer validity check for pointer value in btree_lookup_raw. Skip memory copy when the caller doesn't need the value. Signed-off-by: Huaisheng Ye <yehs1@lenovo.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm raid: remove unnecessary discard limits for raid10Mike Snitzer1-11/+0
Commit bcc90d280465e ("md/raid10: improve raid10 discard request") removes raid10's inability to properly handle large discards. So eliminate associated constraint from dm-raid's raid10 support. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm raid: fix discard limits for raid1 and raid10Mike Snitzer1-5/+7
Block core warned that discard_granularity was 0 for dm-raid with personality of raid1. Reason is that raid_io_hints() was incorrectly special-casing raid1 rather than raid0. But since commit 29efc390b9462 ("md/md0: optimize raid0 discard handling") even raid0 properly handles large discards. Fix raid_io_hints() by removing discard limits settings for raid1. Also, fix limits for raid10 by properly stacking underlying limits as done in blk_stack_limits(). Depends-on: 29efc390b9462 ("md/md0: optimize raid0 discard handling") Fixes: 61697a6abd24a ("dm: eliminate 'split_discard_bios' flag from DM target interface") Cc: stable@vger.kernel.org Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORYMikulas Patocka1-6/+11
Don't use crypto drivers that have the flag CRYPTO_ALG_ALLOCATES_MEMORY set. These drivers allocate memory and thus they are unsuitable for block I/O processing. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: use dm_table_get_device_name() where appropriate in targetsMike Snitzer2-10/+8
dm_table_get_device_name() avoids calling dm_table_get_md() followed by dm_device_name() -- saves intermediate dm_table_get_md() call. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm table: make 'struct dm_table' definition accessible to all of DM coreMike Snitzer5-70/+61
Move 'struct dm_table' definition from dm-table.c to dm-core.h and update DM core to access its members directly. Helps optimize max_io_len() and other methods slightly. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: eliminate need for start_io_acct() forward declarationMike Snitzer1-40/+38
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: simplify __process_abnormal_io()Mike Snitzer1-51/+17
Only call bio_op() once in switch statement. Also remove the excessive factoring out to one line functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: push use of on-stack flush_bio down to __send_empty_flush()Mike Snitzer1-24/+13
Eliminates duplicate code, no functional change. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: optimize max_io_len() by inlining max_io_len_target_boundary()Mike Snitzer1-9/+10
Saves redundant dm_target_offset() math. Also, reverse argument order for max_io_len() to be consistent with other similar functions. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: push md->immutable_target optimization down to __process_bio()Mike Snitzer1-13/+9
Also, update associated stale comment in __bind(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm: change max_io_len() to use blk_max_size_offset()Mike Snitzer1-12/+8
Using blk_max_size_offset() enables DM core's splitting to impose ti->max_io_len (via q->limits.chunk_sectors) and also fallback to respecting q->limits.max_sectors if chunk_sectors isn't set. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29dm table: stack 'chunk_sectors' limit to account for target-specific splittingMike Snitzer1-0/+5
If target set ti->max_io_len it must be used when stacking DM device's queue_limits to establish a 'chunk_sectors' that is compatible with the IO stack. By using lcm_not_zero() care is taken to avoid blindly overriding the chunk_sectors limit stacked up by blk_stack_limits(). Depends-on: 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-29block-mq: fix comments in blk_mq_queue_tag_busy_iteryangerkun1-3/+1
'f5bbbbe4d635 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter")' introduce a bug what we may sleep between rcu lock. Then '530ca2c9bd69 ("blk-mq: Allow blocking queue tag iter callbacks")' fix it by get request_queue's ref. And 'a9a808084d6a ("block: Remove the synchronize_rcu() call from __blk_mq_update_nr_hw_queues()")' remove the synchronize_rcu in __blk_mq_update_nr_hw_queues. We need update the confused comments in blk_mq_queue_tag_busy_iter. Signed-off-by: yangerkun <yangerkun@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-28blk-mq: add cond_resched() in __blk_mq_alloc_rq_maps()Xianting Tian1-1/+3
We found blk_mq_alloc_rq_maps() takes more time in kernel space when testing nvme device hot-plugging. The test and anlysis as below. Debug code, 1, blk_mq_alloc_rq_maps(): u64 start, end; depth = set->queue_depth; start = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] queue depth %d, nr_hw_queues %d\n", current->pid, current->comm, current->nvcsw, current->nivcsw, set->queue_depth, set->nr_hw_queues); do { err = __blk_mq_alloc_rq_maps(set); if (!err) break; set->queue_depth >>= 1; if (set->queue_depth < set->reserved_tags + BLK_MQ_TAG_MIN) { err = -ENOMEM; break; } } while (set->queue_depth); end = ktime_get_ns(); pr_err("[%d:%s switch:%ld,%ld] all hw queues init cost time %lld ns\n", current->pid, current->comm, current->nvcsw, current->nivcsw, end - start); 2, __blk_mq_alloc_rq_maps(): u64 start, end; for (i = 0; i < set->nr_hw_queues; i++) { start = ktime_get_ns(); if (!__blk_mq_alloc_rq_map(set, i)) goto out_unwind; end = ktime_get_ns(); pr_err("hw queue %d init cost time %lld ns\n", i, end - start); } Test nvme hot-plugging with above debug code, we found it totally cost more than 3ms in kernel space without being scheduled out when alloc rqs for all 16 hw queues with depth 1023, each hw queue cost about 140-250us. The cost time will be increased with hw queue number and queue depth increasing. And in an extreme case, if __blk_mq_alloc_rq_maps() returns -ENOMEM, it will try "queue_depth >>= 1", more time will be consumed. [ 428.428771] nvme nvme0: pci function 10000:01:00.0 [ 428.428798] nvme 10000:01:00.0: enabling device (0000 -> 0002) [ 428.428806] pcieport 10000:00:00.0: can't derive routing for PCI INT A [ 428.428809] nvme 10000:01:00.0: PCI INT A: no GSI [ 432.593374] [4688:kworker/u33:8 switch:663,2] queue depth 30, nr_hw_queues 1 [ 432.593404] hw queue 0 init cost time 22883 ns [ 432.593408] [4688:kworker/u33:8 switch:663,2] all hw queues init cost time 35960 ns [ 432.595953] nvme nvme0: 16/0/0 default/read/poll queues [ 432.595958] [4688:kworker/u33:8 switch:700,2] queue depth 1023, nr_hw_queues 16 [ 432.596203] hw queue 0 init cost time 242630 ns [ 432.596441] hw queue 1 init cost time 235913 ns [ 432.596659] hw queue 2 init cost time 216461 ns [ 432.596877] hw queue 3 init cost time 215851 ns [ 432.597107] hw queue 4 init cost time 228406 ns [ 432.597336] hw queue 5 init cost time 227298 ns [ 432.597564] hw queue 6 init cost time 224633 ns [ 432.597785] hw queue 7 init cost time 219954 ns [ 432.597937] hw queue 8 init cost time 150930 ns [ 432.598082] hw queue 9 init cost time 143496 ns [ 432.598231] hw queue 10 init cost time 147261 ns [ 432.598397] hw queue 11 init cost time 164522 ns [ 432.598542] hw queue 12 init cost time 143401 ns [ 432.598692] hw queue 13 init cost time 148934 ns [ 432.598841] hw queue 14 init cost time 147194 ns [ 432.598991] hw queue 15 init cost time 148942 ns [ 432.598993] [4688:kworker/u33:8 switch:700,2] all hw queues init cost time 3035099 ns [ 432.602611] nvme0n1: p1 So use this patch to trigger schedule between each hw queue init, to avoid other threads getting stuck. It is not in atomic context when executing __blk_mq_alloc_rq_maps(), so it is safe to call cond_resched(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: consider iocgs with active delays for debt forgivenessTejun Heo1-4/+7
An iocg may have 0 debt but non-zero delay. The current debt forgiveness logic doesn't act on such iocgs. This can lead to unexpected behaviors - an iocg with a little bit of debt will have its delay canceled through debt forgiveness but one w/o any debt but active delay will have to wait out until its delay decays out. This patch updates the debt handling logic so that it treats delays the same as debts. If either debt or delay is active, debt forgiveness logic kicks in and acts on both the same way. Also, avoid turning the debt and delay directly to zero as that can confuse state transitions. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: add iocg_forgive_debt tracepointTejun Heo2-0/+53
Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: reimplement debt forgiveness using average usageTejun Heo1-25/+69
Debt forgiveness logic was counting the number of consecutive !busy periods as the trigger condition. While this usually works, it can easily be thrown off by temporary fluctuations especially on configurations w/ short periods. This patch reimplements debt forgiveness so that: * Use the average usage over the forgiveness period instead of counting consecutive periods. * Debt is reduced at around the target rate (1/2 every 100ms) regardless of ioc period duration. * Usage threshold is raised to 50%. Combined with the preceding changes and the switch to average usage, this makes debt forgivness a lot more effective at reducing the amount of unnecessary idleness. * Constants are renamed with DFGV_ prefix. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: recalculate delay after debt reductionTejun Heo1-1/+3
Debt sets the initial delay duration which is decayed over time. The current debt reduction halved the debt but didn't change the delay. It prevented future debts from increasing delay but didn't do anything to lower the existing delay, limiting the mechanism's ability to reduce unnecessary idling. Reset iocg->delay to 0 after debt reduction so that iocg_kick_waitq() recalculates new delay value based on the reduced debt amount. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: replace nr_shortages cond in ioc_forgive_debts() with busy_level oneTejun Heo1-8/+5
Debt reduction was blocked if any iocg was short on budget in the past period to avoid reducing debts while some iocgs are saturated. However, this ends up unnecessarily blocking debt reduction due to temporary local imbalances when the device is generally being underutilized, while also failing to block when the underlying device is overwhelmed and the usage becomes low from high latency. Given that debt accumulation mostly happens with swapout bursts which can significantly deteriorate the underlying device's latency response, the current logic is not great. Let's replace it with ioc->busy_level based condition so that we block debt reduction when the underlying device is being saturated. ioc_forgive_debts() call is moved after busy_level determination. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25iocost: factor out ioc_forgive_debts()Tejun Heo1-31/+35
Debt reduction logic is going to be improved and expanded. Factor it out into ioc_forgive_debts() and generalize the comment a bit. No functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25dm: add support for REQ_NOWAIT and enable it for linear targetKonstantin Khlebnikov4-3/+44
Add DM target feature flag DM_TARGET_NOWAIT which advertises that target works with REQ_NOWAIT bios. Add dm_table_supports_nowait() and update dm_table_set_restrictions() to set/clear QUEUE_FLAG_NOWAIT accordingly. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: add QUEUE_FLAG_NOWAITMike Snitzer2-4/+7
Add QUEUE_FLAG_NOWAIT to allow a block device to advertise support for REQ_NOWAIT. Bio-based devices may set QUEUE_FLAG_NOWAIT where applicable. Update QUEUE_FLAG_MQ_DEFAULT to include QUEUE_FLAG_NOWAIT. Also update submit_bio_checks() to verify it is set for REQ_NOWAIT bios. Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25vsprintf: use bd_partno in bdev_nameChristoph Hellwig1-2/+2
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: use bd_partno in bdevnameChristoph Hellwig1-1/+1
No need to go through the hd_struct to find the partition number. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25target/iblock: fix holder printing in iblock_show_configfs_dev_paramsChristoph Hellwig1-3/+2
bd_contains is never NULL for an open block device. In addition ibd_bd is always set to a block device that was exclusively opened by the target code, so the holder is guranteed to be ib_dev as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25drbd: don't set ->bd_containsChristoph Hellwig1-2/+0
The ->bd_contains field is set by __blkdev_get and drivers have no business manipulating it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25drbd: don't detour through bd_contains for the gendiskChristoph Hellwig2-2/+2
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25md: don't detour through bd_contains for the gendiskChristoph Hellwig2-2/+2
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25md: compare bd_disk instead of bd_containsChristoph Hellwig1-4/+3
To check for partitions of the same disk bd_contains works as well, but bd_disk is way more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig10-17/+22
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25Documentation/hdio: fix up obscure bd_contains referencesChristoph Hellwig1-12/+12
bd_contains is an implementation detail and should not be mentioned in a userspace API documentation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flagChristoph Hellwig10-58/+29
Replace the two negative flags that are always used together with a single positive flag that indicates the writeback capability instead of two related non-capabilities. Also remove the pointless wrappers to just check the flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: invert BDI_CAP_NO_ACCT_WBChristoph Hellwig4-13/+8
Replace BDI_CAP_NO_ACCT_WB with a positive BDI_CAP_WRITEBACK_ACCT to make the checks more obvious. Also remove the pointless bdi_cap_account_writeback wrapper that just obsfucates the check. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig18-36/+33
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24mm: use SWP_SYNCHRONOUS_IO more intelligentlyChristoph Hellwig1-8/+10
There is no point in trying to call bdev_read_page if SWP_SYNCHRONOUS_IO is not set, as the device won't support it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_SYNCHRONOUS_IOChristoph Hellwig6-20/+14
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to decided if ->rw_page can be used on a block device. Just check up for the method instead. The only complication is that zram needs a second set of block_device_operations as it can switch between modes that actually support ->rw_page and those who don't. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: remove BDI_CAP_CGROUP_WRITEBACKChristoph Hellwig3-7/+3
Just checking SB_I_CGROUPWB for cgroup writeback support is enough. Either the file system allocates its own bdi (e.g. btrfs), in which case it is known to support cgroup writeback, or the bdi comes from the block layer, which always supports cgroup writeback. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24block: lift setting the readahead size into the block layerChristoph Hellwig11-68/+24
Drivers shouldn't really mess with the readahead size, as that is a VM concept. Instead set it based on the optimal I/O size by lifting the algorithm from the md driver when registering the disk. Also set bdi->io_pages there as well by applying the same scheme based on max_sectors. To ensure the limits work well for stacking drivers a new helper is added to update the readahead limits from the block limits, which is also called from disk_stack_limits. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24md: update the optimal I/O size on reshapeChristoph Hellwig2-10/+22
The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bdi: initialize ->ra_pages and ->io_pages in bdi_initChristoph Hellwig10-15/+13
Set up a readahead size by default, as very few users have a good reason to change it. This means code, ecryptfs, and orangefs now set up the values while they were previously missing it, while ubifs, mtd and vboxsf manually set it to 0 to avoid readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Richard Weinberger <richard@nod.at> [ubifs, mtd] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24aoe: set an optimal I/O sizeChristoph Hellwig1-2/+2
aoe forces a larger readahead size, but any reason to do larger I/O is not limited to readahead. Also set the optimal I/O size, and remove the local constants in favor of just using SZ_2G. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24bcache: inherit the optimal I/O sizeChristoph Hellwig1-0/+2
Inherit the optimal I/O size setting just like the readahead window, as any reason to do larger I/O does not apply to just readahead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24drbd: remove dead code in device_to_statisticsChristoph Hellwig1-6/+0
Ever since the switch to blk-mq, a lower device not used for VM writeback will not be marked congested, so the check will never trigger. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-20 15:04:08 +0100