summaryrefslogtreecommitdiffstats
path: root/drivers/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
...
* | ionic: fix use after netif_napi_del()Taehee Yoo2024-06-131-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When queues are started, netif_napi_add() and napi_enable() are called. If there are 4 queues and only 3 queues are used for the current configuration, only 3 queues' napi should be registered and enabled. The ionic_qcq_enable() checks whether the .poll pointer is not NULL for enabling only the using queue' napi. Unused queues' napi will not be registered by netif_napi_add(), so the .poll pointer indicates NULL. But it couldn't distinguish whether the napi was unregistered or not because netif_napi_del() doesn't reset the .poll pointer to NULL. So, ionic_qcq_enable() calls napi_enable() for the queue, which was unregistered by netif_napi_del(). Reproducer: ethtool -L <interface name> rx 1 tx 1 combined 0 ethtool -L <interface name> rx 0 tx 0 combined 1 ethtool -L <interface name> rx 0 tx 0 combined 4 Splat looks like: kernel BUG at net/core/dev.c:6666! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 1057 Comm: kworker/3:3 Not tainted 6.10.0-rc2+ #16 Workqueue: events ionic_lif_deferred_work [ionic] RIP: 0010:napi_enable+0x3b/0x40 Code: 48 89 c2 48 83 e2 f6 80 b9 61 09 00 00 00 74 0d 48 83 bf 60 01 00 00 00 74 03 80 ce 01 f0 4f RSP: 0018:ffffb6ed83227d48 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff97560cda0828 RCX: 0000000000000029 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff97560cda0a28 RBP: ffffb6ed83227d50 R08: 0000000000000400 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff97560ce3c1a0 R14: 0000000000000000 R15: ffff975613ba0a20 FS: 0000000000000000(0000) GS:ffff975d5f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8f734ee200 CR3: 0000000103e50000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? die+0x33/0x90 ? do_trap+0xd9/0x100 ? napi_enable+0x3b/0x40 ? do_error_trap+0x83/0xb0 ? napi_enable+0x3b/0x40 ? napi_enable+0x3b/0x40 ? exc_invalid_op+0x4e/0x70 ? napi_enable+0x3b/0x40 ? asm_exc_invalid_op+0x16/0x20 ? napi_enable+0x3b/0x40 ionic_qcq_enable+0xb7/0x180 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_start_queues+0xc4/0x290 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_link_status_check+0x11c/0x170 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] ionic_lif_deferred_work+0x129/0x280 [ionic 59bdfc8a035436e1c4224ff7d10789e3f14643f8] process_one_work+0x145/0x360 worker_thread+0x2bb/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0xcc/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240612060446.1754392-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | Revert "igc: fix a log entry using uninitialized netdev"Sasha Neftin2024-06-131-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 86167183a17e03ec77198897975e9fdfbd53cb0b. igc_ptp_init() needs to be called before igc_reset(), otherwise kernel crash could be observed. Following the corresponding discussion [1] and [2] revert this commit. Link: https://lore.kernel.org/all/8fb634f8-7330-4cf4-a8ce-485af9c0a61a@intel.com/ [1] Link: https://lore.kernel.org/all/87o78rmkhu.fsf@intel.com/ [2] Fixes: 86167183a17e ("igc: fix a log entry using uninitialized netdev") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240611162456.961631-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs ↵Xiaolei Wang2024-06-121-14/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | parameters The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula. Fixes: 1f705bc61aee ("net: stmmac: Add support for CBS QDISC") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20240608143524.2065736-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | gve: ignore nonrelevant GSO type bits when processing TSO headersJoshua Washington2024-06-121-15/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TSO currently fails when the skb's gso_type field has more than one bit set. TSO packets can be passed from userspace using PF_PACKET, TUNTAP and a few others, using virtio_net_hdr (e.g., PACKET_VNET_HDR). This includes virtualization, such as QEMU, a real use-case. The gso_type and gso_size fields as passed from userspace in virtio_net_hdr are not trusted blindly by the kernel. It adds gso_type |= SKB_GSO_DODGY to force the packet to enter the software GSO stack for verification. This issue might similarly come up when the CWR bit is set in the TCP header for congestion control, causing the SKB_GSO_TCP_ECN gso_type bit to be set. Fixes: a57e5de476be ("gve: DQO: Add TX path") Signed-off-by: Joshua Washington <joshwash@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Andrei Vagin <avagin@gmail.com> v2 - Remove unnecessary comments, remove line break between fixes tag and signoffs. v3 - Add back unrelated empty line removal. Link: https://lore.kernel.org/r/20240610225729.2985343-1-joshwash@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net/mlx5e: Fix features validation check for tunneled UDP (non-VXLAN) packetsGal Pressman2024-06-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the vxlan_features_check() call to after we verified the packet is a tunneled VXLAN packet. Without this, tunneled UDP non-VXLAN packets (for ex. GENENVE) might wrongly not get offloaded. In some cases, it worked by chance as GENEVE header is the same size as VXLAN, but it is obviously incorrect. Fixes: e3cfc7e6b7bd ("net/mlx5e: TX, Add geneve tunnel stateless offload support") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | geneve: Fix incorrect inner network header offset when innerprotoinherit is setGal Pressman2024-06-101-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When innerprotoinherit is set, the tunneled packets do not have an inner Ethernet header. Change 'maclen' to not always assume the header length is ETH_HLEN, as there might not be a MAC header. This resolves issues with drivers (e.g. mlx5, in mlx5e_tx_tunnel_accel()) who rely on the skb inner network header offset to be correct, and use it for TX offloads. Fixes: d8a6213d70ac ("geneve: fix header validation in geneve[6]_xmit_skb") Signed-off-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net dsa: qca8k: fix usages of device_get_named_child_node()Andy Shevchenko2024-06-101-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The documentation for device_get_named_child_node() mentions this important point: " The caller is responsible for calling fwnode_handle_put() on the returned fwnode pointer. " Add fwnode_handle_put() to avoid leaked references. Fixes: 1e264f9d2918 ("net: dsa: qca8k: add LEDs basic support") Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: fix backwards compatibility in nsim_get_iflink()David Wei2024-06-101-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default ndo_get_iflink() implementation returns the current ifindex of the netdev. But the overridden nsim_get_iflink() returns 0 if the current nsim is not linked, breaking backwards compatibility for userspace that depend on this behaviour. Fix the problem by returning the current ifindex if not linked to a peer. Fixes: 8debcf5832c3 ("netdevsim: add ndo_get_iflink() implementation") Reported-by: Yu Watanabe <watanabe.yu@gmail.com> Suggested-by: Yu Watanabe <watanabe.yu@gmail.com> Signed-off-by: David Wei <dw@davidwei.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: stmmac: dwmac-qcom-ethqos: Configure host DMA widthSagar Cheluvegowda2024-06-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 070246e4674b ("net: stmmac: Fix for mismatched host/device DMA address width") added support in the stmmac driver for platform drivers to indicate the host DMA width, but left it up to authors of the specific platforms to indicate if their width differed from the addr64 register read from the MAC itself. Qualcomm's EMAC4 integration supports only up to 36 bit width (as opposed to the addr64 register indicating 40 bit width). Let's indicate that in the platform driver to avoid a scenario where the driver will allocate descriptors of size that is supported by the CPU which in our case is 36 bit, but as the addr64 register is still capable of 40 bits the device will use two descriptors as one address. Fixes: 8c4d92e82d50 ("net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms") Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | liquidio: Adjust a NULL pointer handling path in lio_vf_rep_copy_packetAleksandr Mishin2024-06-071-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In lio_vf_rep_copy_packet() pg_info->page is compared to a NULL value, but then it is unconditionally passed to skb_add_rx_frag() which looks strange and could lead to null pointer dereference. lio_vf_rep_copy_packet() call trace looks like: octeon_droq_process_packets octeon_droq_fast_process_packets octeon_droq_dispatch_pkt octeon_create_recv_info ...search in the dispatch_list... ->disp_fn(rdisp->rinfo, ...) lio_vf_rep_pkt_recv(struct octeon_recv_info *recv_info, ...) In this path there is no code which sets pg_info->page to NULL. So this check looks unneeded and doesn't solve potential problem. But I guess the author had reason to add a check and I have no such card and can't do real test. In addition, the code in the function liquidio_push_packet() in liquidio/lio_core.c does exactly the same. Based on this, I consider the most acceptable compromise solution to adjust this issue by moving skb_add_rx_frag() into conditional scope. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f233f327913 ("liquidio: switchdev support for LiquidIO NIC") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: add cond_resched() to hns3 ring buffer init processJie Wang2024-06-072-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently hns3 ring buffer init process would hold cpu too long with big Tx/Rx ring depth. This could cause soft lockup. So this patch adds cond_resched() to the process. Then cpu can break to run other tasks instead of busy looping. Fixes: a723fb8efe29 ("net: hns3: refine for set ring parameters") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: hns3: fix kernel crash problem in concurrent scenarioYonglong Liu2024-06-071-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. Fixes: 45e92b7e4e27 ("net: hns3: add calling roce callback function when link status change") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: sfp: Always call `sfp_sm_mod_remove()` on removeCsókás, Bence2024-06-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the module is in SFP_MOD_ERROR, `sfp_sm_mod_remove()` will not be run. As a consequence, `sfp_hwmon_remove()` is not getting run either, leaving a stale `hwmon` device behind. `sfp_sm_mod_remove()` itself checks `sfp->sm_mod_state` anyways, so this check was not really needed in the first place. Fixes: d2e816c0293f ("net: sfp: handle module remove outside state machine") Signed-off-by: "Csókás, Bence" <csokas.bence@prolan.hu> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240605084251.63502-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: iosm: Fix tainted pointer delete is case of region creation failAleksandr Mishin2024-06-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of region creation fail in ipc_devlink_create_region(), previously created regions delete process starts from tainted pointer which actually holds error code value. Fix this bug by decreasing region index before delete. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 4dcd183fbd67 ("net: wwan: iosm: devlink registration") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240604082500.20769-1-amishin@t-argos.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | igc: Fix Energy Efficient Ethernet support declarationSasha Neftin2024-06-062-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") removed SUPPORTED_Autoneg field but left inappropriate ethtool_keee structure initialization. When "ethtool --show <device>" (get_eee) invoke, the 'ethtool_keee' structure was accidentally overridden. Remove the 'ethtool_keee' overriding and add EEE declaration as per IEEE specification that allows reporting Energy Efficient Ethernet capabilities. Examples: Before fix: ethtool --show-eee enp174s0 EEE settings for enp174s0: EEE status: not supported After fix: EEE settings for enp174s0: EEE status: disabled Tx LPI: disabled Supported EEE link modes: 100baseT/Full 1000baseT/Full 2500baseT/Full Fixes: 01cf893bf0f4 ("net: intel: i40e/igc: Remove setting Autoneg in EEE capabilities") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-6-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: map XDP queues to vectors in ice_vsi_map_rings_to_vectors()Larysa Zaremba2024-06-064-46/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ice_pf_dcb_recfg() re-maps queues to vectors with ice_vsi_map_rings_to_vectors(), which does not restore the previous state for XDP queues. This leads to no AF_XDP traffic after rebuild. Map XDP queues to vectors in ice_vsi_map_rings_to_vectors(). Also, move the code around, so XDP queues are mapped independently only through .ndo_bpf(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-5-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: add flag to distinguish reset from .ndo_bpf in XDP rings configLarysa Zaremba2024-06-063-14/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") has placed ice_vsi_free_q_vectors() after ice_destroy_xdp_rings() in the rebuild process. The behaviour of the XDP rings config functions is context-dependent, so the change of order has led to ice_destroy_xdp_rings() doing additional work and removing XDP prog, when it was supposed to be preserved. Also, dependency on the PF state reset flags creates an additional, fortunately less common problem: * PFR is requested e.g. by tx_timeout handler * .ndo_bpf() is asked to delete the program, calls ice_destroy_xdp_rings(), but reset flag is set, so rings are destroyed without deleting the program * ice_vsi_rebuild tries to delete non-existent XDP rings, because the program is still on the VSI * system crashes With a similar race, when requested to attach a program, ice_prepare_xdp_rings() can actually skip setting the program in the VSI and nevertheless report success. Instead of reverting to the old order of function calls, add an enum argument to both ice_prepare_xdp_rings() and ice_destroy_xdp_rings() in order to distinguish between calls from rebuild and .ndo_bpf(). Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-4-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: remove af_xdp_zc_qps bitmapLarysa Zaremba2024-06-063-26/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Referenced commit has introduced a bitmap to distinguish between ZC and copy-mode AF_XDP queues, because xsk_get_pool_from_qid() does not do this for us. The bitmap would be especially useful when restoring previous state after rebuild, if only it was not reallocated in the process. This leads to e.g. xdpsock dying after changing number of queues. Instead of preserving the bitmap during the rebuild, remove it completely and distinguish between ZC and copy-mode queues based on the presence of a device associated with the pool. Fixes: e102db780e1c ("ice: track AF_XDP ZC enabled queues in bitmap") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-3-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: fix reads from NVM Shadow RAM on E830 and E825-C devicesJacob Keller2024-06-062-9/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice driver reads data from the Shadow RAM portion of the NVM during initialization, including data used to identify the NVM image and device, such as the ETRACK ID used to populate devlink dev info fw.bundle. Currently it is using a fixed offset defined by ICE_CSS_HEADER_LENGTH to compute the appropriate offset. This worked fine for E810 and E822 devices which both have CSS header length of 330 words. Other devices, including both E825-C and E830 devices have different sizes for their CSS header. The use of a hard coded value results in the driver reading from the wrong block in the NVM when attempting to access the Shadow RAM copy. This results in the driver reporting the fw.bundle as 0x0 in both the devlink dev info and ethtool -i output. The first E830 support was introduced by commit ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs") and the first E825-C support was introducted by commit f64e18944233 ("ice: introduce new E825C devices family") The NVM actually contains the CSS header length embedded in it. Remove the hard coded value and replace it with logic to read the length from the NVM directly. This is more resilient against all existing and future hardware, vs looking up the expected values from a table. It ensures the driver will read from the appropriate place when determining the ETRACK ID value used for populating the fw.bundle_id and for reporting in ethtool -i. The CSS header length for both the active and inactive flash bank is stored in the ice_bank_info structure to avoid unnecessary duplicate work when accessing multiple words of the Shadow RAM. Both banks are read in the unlikely event that the header length is different for the NVM in the inactive bank, rather than being different only by the overall device family. Fixes: ba20ecb1d1bb ("ice: Hook up 4 E830 devices by adding their IDs") Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-2-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | ice: fix iteration of TLVs in Preserved Fields AreaJacob Keller2024-06-061-7/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ice_get_pfa_module_tlv() function iterates over the Type-Length-Value structures in the Preserved Fields Area (PFA) of the NVM. This is used by the driver to access data such as the Part Board Assembly identifier. The function uses simple logic to iterate over the PFA. First, the pointer to the PFA in the NVM is read. Then the total length of the PFA is read from the first word. A pointer to the first TLV is initialized, and a simple loop iterates over each TLV. The pointer is moved forward through the NVM until it exceeds the PFA area. The logic seems sound, but it is missing a key detail. The Preserved Fields Area length includes one additional final word. This is documented in the device data sheet as a dummy word which contains 0xFFFF. All NVMs have this extra word. If the driver tries to scan for a TLV that is not in the PFA, it will read past the size of the PFA. It reads and interprets the last dummy word of the PFA as a TLV with type 0xFFFF. It then reads the word following the PFA as a length. The PFA resides within the Shadow RAM portion of the NVM, which is relatively small. All of its offsets are within a 16-bit size. The PFA pointer and TLV pointer are stored by the driver as 16-bit values. In almost all cases, the word following the PFA will be such that interpreting it as a length will result in 16-bit arithmetic overflow. Once overflowed, the new next_tlv value is now below the maximum offset of the PFA. Thus, the driver will continue to iterate the data as TLVs. In the worst case, the driver hits on a sequence of reads which loop back to reading the same offsets in an endless loop. To fix this, we need to correct the loop iteration check to account for this extra word at the end of the PFA. This alone is sufficient to resolve the known cases of this issue in the field. However, it is plausible that an NVM could be misconfigured or have corrupt data which results in the same kind of overflow. Protect against this by using check_add_overflow when calculating both the maximum offset of the TLVs, and when calculating the next_tlv offset at the end of each loop iteration. This ensures that the driver will not get stuck in an infinite loop when scanning the PFA. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Co-developed-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240603-net-2024-05-30-intel-net-fixes-v2-1-e3563aa89b0c@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net/mlx5: Fix tainted pointer delete is case of flow rules creation failAleksandr Mishin2024-06-051-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of flow rule creation fail in mlx5_lag_create_port_sel_table(), instead of previously created rules, the tainted pointer is deleted deveral times. Fix this bug by using correct flow rules pointers. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20240604100552.25201-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net/mlx5: Always stop health timer during driver removalShay Drory2024-06-051-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, if teardown_hca fails to execute during driver removal, mlx5 does not stop the health timer. Afterwards, mlx5 continue with driver teardown. This may lead to a UAF bug, which results in page fault Oops[1], since the health timer invokes after resources were freed. Hence, stop the health monitor even if teardown_hca fails. [1] mlx5_core 0000:18:00.0: E-Switch: Unload vfs: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0) mlx5_core 0000:18:00.0: E-Switch: cleanup mlx5_core 0000:18:00.0: wait_func:1155:(pid 1967079): TEARDOWN_HCA(0x103) timeout. Will cause a leak of a command resource mlx5_core 0000:18:00.0: mlx5_function_close:1288:(pid 1967079): tear_down_hca failed, skip cleanup BUG: unable to handle page fault for address: ffffa26487064230 PGD 100c00067 P4D 100c00067 PUD 100e5a067 PMD 105ed7067 PTE 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Tainted: G OE ------- --- 6.7.0-68.fc38.x86_64 #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0013.121520200651 12/15/2020 RIP: 0010:ioread32be+0x34/0x60 RSP: 0018:ffffa26480003e58 EFLAGS: 00010292 RAX: ffffa26487064200 RBX: ffff9042d08161a0 RCX: ffff904c108222c0 RDX: 000000010bbf1b80 RSI: ffffffffc055ddb0 RDI: ffffa26487064230 RBP: ffff9042d08161a0 R08: 0000000000000022 R09: ffff904c108222e8 R10: 0000000000000004 R11: 0000000000000441 R12: ffffffffc055ddb0 R13: ffffa26487064200 R14: ffffa26480003f00 R15: ffff904c108222c0 FS: 0000000000000000(0000) GS:ffff904c10800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa26487064230 CR3: 00000002c4420006 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? exc_page_fault+0x175/0x180 ? asm_exc_page_fault+0x26/0x30 ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] ? ioread32be+0x34/0x60 mlx5_health_check_fatal_sensors+0x20/0x100 [mlx5_core] ? __pfx_poll_health+0x10/0x10 [mlx5_core] poll_health+0x42/0x230 [mlx5_core] ? __next_timer_interrupt+0xbc/0x110 ? __pfx_poll_health+0x10/0x10 [mlx5_core] call_timer_fn+0x21/0x130 ? __pfx_poll_health+0x10/0x10 [mlx5_core] __run_timers+0x222/0x2c0 run_timer_softirq+0x1d/0x40 __do_softirq+0xc9/0x2c8 __irq_exit_rcu+0xa6/0xc0 sysvec_apic_timer_interrupt+0x72/0x90 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:cpuidle_enter_state+0xcc/0x440 ? cpuidle_enter_state+0xbd/0x440 cpuidle_enter+0x2d/0x40 do_idle+0x20d/0x270 cpu_startup_entry+0x2a/0x30 rest_init+0xd0/0xd0 arch_call_rest_init+0xe/0x30 start_kernel+0x709/0xa90 x86_64_start_reservations+0x18/0x30 x86_64_start_kernel+0x96/0xa0 secondary_startup_64_no_verify+0x18f/0x19b ---[ end trace 0000000000000000 ]--- Fixes: 9b98d395b85d ("net/mlx5: Start health poll at earlier stage of driver load") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/mlx5: Stop waiting for PCI if pci channel is offlineMoshe Shemesh2024-06-053-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case pci channel becomes offline the driver should not wait for PCI reads during health dump and recovery flow. The driver has timeout for each of these loops trying to read PCI, so it would fail anyway. However, in case of recovery waiting till timeout may cause the pci error_detected() callback fail to meet pci_dpc_recovered() wait timeout. Fixes: b3bd076f7501 ("net/mlx5: Report devlink health on FW fatal issues") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: ethernet: mtk_eth_soc: handle dma buffer size soc specificFrank Wunderlich2024-06-052-36/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mainline MTK ethernet driver suffers long time from rarly but annoying tx queue timeouts. We think that this is caused by fixed dma sizes hardcoded for all SoCs. We suspect this problem arises from a low level of free TX DMADs, the TX Ring alomost full. The transmit timeout is caused by the Tx queue not waking up. The Tx queue stops when the free counter is less than ring->thres, and it will wake up once the free counter is greater than ring->thres. If the CPU is too late to wake up the Tx queues, it may cause a transmit timeout. Therefore, we increased the TX and RX DMADs to improve this error situation. Use the dma-size implementation from SDK in a per SoC manner. In difference to SDK we have no RSS feature yet, so all RX/TX sizes should be raised from 512 to 2048 byte except fqdma on mt7988 to avoid the tx timeout issue. Fixes: 656e705243fd ("net-next: mediatek: add support for MT7623 ethernet") Suggested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vxlan: Fix regression when dropping packets due to invalid src addressesDaniel Borkmann2024-06-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c1e5b9 vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c1e5b9 for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c1e5b9 ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Bauer <mail@david-bauer.net> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | ionic: fix kernel panic in XDP_TX actionTaehee Yoo2024-06-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the XDP_TX path, ionic driver sends a packet to the TX path with rx page and corresponding dma address. After tx is done, ionic_tx_clean() frees that page. But RX ring buffer isn't reset to NULL. So, it uses a freed page, which causes kernel panic. BUG: unable to handle page fault for address: ffff8881576c110c PGD 773801067 P4D 773801067 PUD 87f086067 PMD 87efca067 PTE 800ffffea893e060 Oops: Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN NOPTI CPU: 1 PID: 25 Comm: ksoftirqd/1 Not tainted 6.9.0+ #11 Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 RIP: 0010:bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f Code: 00 53 41 55 41 56 41 57 b8 01 00 00 00 48 8b 5f 08 4c 8b 77 00 4c 89 f7 48 83 c7 0e 48 39 d8 RSP: 0018:ffff888104e6fa28 EFLAGS: 00010283 RAX: 0000000000000002 RBX: ffff8881576c1140 RCX: 0000000000000002 RDX: ffffffffc0051f64 RSI: ffffc90002d33048 RDI: ffff8881576c110e RBP: ffff888104e6fa88 R08: 0000000000000000 R09: ffffed1027a04a23 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881b03a21a8 R13: ffff8881589f800f R14: ffff8881576c1100 R15: 00000001576c1100 FS: 0000000000000000(0000) GS:ffff88881ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8881576c110c CR3: 0000000767a90000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x254/0x790 ? __pfx_page_fault_oops+0x10/0x10 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? search_bpf_extables+0x165/0x260 ? fixup_exception+0x4a/0x970 ? exc_page_fault+0xcb/0xe0 ? asm_exc_page_fault+0x22/0x30 ? 0xffffffffc0051f64 ? bpf_prog_f0b8caeac1068a55_balancer_ingress+0x3b/0x44f ? do_raw_spin_unlock+0x54/0x220 ionic_rx_service+0x11ab/0x3010 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_clean+0x29b/0xc60 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_tx_clean+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? ionic_tx_cq_service+0x25d/0xa00 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ? __pfx_ionic_rx_service+0x10/0x10 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_cq_service+0x69/0x150 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] ionic_txrx_napi+0x11a/0x540 [ionic 9180c3001ab627d82bbc5f3ebe8a0decaf6bb864] __napi_poll.constprop.0+0xa0/0x440 net_rx_action+0x7e7/0xc30 ? __pfx_net_rx_action+0x10/0x10 Fixes: 8eeed8373e1c ("ionic: Add XDP_TX support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: Micrel KSZ8061: fix errata solution not taking effect problemTristram Ha2024-06-051-1/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | KSZ8061 needs to write to a MMD register at driver initialization to fix an errata. This worked in 5.0 kernel but not in newer kernels. The issue is the main phylib code no longer resets PHY at the very beginning. Calling phy resuming code later will reset the chip if it is already powered down at the beginning. This wipes out the MMD register write. Solution is to implement a phy resume function for KSZ8061 to take care of this problem. Fixes: 232ba3a51cc2 ("net: phy: Micrel KSZ8061: link failure after cable connect") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | octeontx2-af: Always allocate PF entries from low prioriy zoneSubbaraya Sundeep2024-06-051-11/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PF mcam entries has to be at low priority always so that VF can install longest prefix match rules at higher priority. This was taken care currently but when priority allocation wrt reference entry is requested then entries are allocated from mid-zone instead of low priority zone. Fix this and always allocate entries from low priority zone for PFs. Fixes: 7df5b4b260dd ("octeontx2-af: Allocate low priority entries for PF") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'wireless-2024-06-03' of ↵Jakub Kicinski2024-06-0425-125/+219
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.10-rc3 The first fixes for v6.10. And we have a big one, I suspect the biggest wireless pull request we ever had. There are fixes all over, both in stack and drivers. Likely the most important here are mt76 not working on mt7615 devices, ath11k not being able to connect to 6 GHz networks and rtlwifi suffering from packet loss. But of course there's much more. * tag 'wireless-2024-06-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (37 commits) wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS wifi: mt76: mt7615: add missing chanctx ops wifi: wilc1000: document SRCU usage instead of SRCU Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section" Revert "wifi: wilc1000: convert list management to RCU" wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan() wifi: mac80211: correctly parse Spatial Reuse Parameter Set element wifi: mac80211: fix Spatial Reuse element size check wifi: iwlwifi: mvm: don't read past the mfuart notifcation wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkill wifi: iwlwifi: mvm: check n_ssids before accessing the ssids wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe option wifi: iwlwifi: mvm: handle BA session teardown in RF-kill wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmd wifi: iwlwifi: mvm: remove stale STA link data during restart wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdef wifi: iwlwifi: mvm: set properly mac header wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64 wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookup wifi: iwlwifi: mvm: fix a crash on 7265 ... ==================== Link: https://lore.kernel.org/r/20240603115129.9494CC2BD10@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * wifi: rtlwifi: Ignore IEEE80211_CONF_CHANGE_RETRY_LIMITSBitterblue Smith2024-06-011-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") ieee80211_hw_config() is no longer called with changed = ~0. rtlwifi relied on ~0 in order to ignore the default retry limits of 4/7, preferring 48/48 in station mode and 7/7 in AP/IBSS. RTL8192DU has a lot of packet loss with the default limits from mac80211. Fix it by ignoring IEEE80211_CONF_CHANGE_RETRY_LIMITS completely, because it's the simplest solution. Link: https://lore.kernel.org/linux-wireless/cedd13d7691f4692b2a2fa5a24d44a22@realtek.com/ Cc: stable@vger.kernel.org # 6.9.x Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/1fabb8e4-adf3-47ae-8462-8aea963bc2a5@gmail.com
| * wifi: mt76: mt7615: add missing chanctx opsJohannes Berg2024-06-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Here's another one I missed during the initial conversion, fix that. Cc: stable@vger.kernel.org Reported-by: Rene Petersen <renepetersen@posteo.de> Fixes: 0a44dfc07074 ("wifi: mac80211: simplify non-chanctx drivers") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218895 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528142308.3f7db1821e68.I531135d7ad76331a50244d6d5288e14aa9668390@changeid
| * wifi: wilc1000: document SRCU usage instead of SRCUAlexis Lothoré2024-06-011-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") attempted to convert SRCU to RCU usage, assuming it was not really needed. The runtime issues that arose after merging it showed that there are code paths involving sleeping functions, and removing those would need some heavier driver rework. Add some documentation about SRCU need to make sure that any future developer do not miss some use cases if tempted to convert back again to RCU. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-3-bce096e0798c@bootlin.com
| * Revert "wifi: wilc1000: set atomic flag on kmemdup in srcu critical section"Alexis Lothoré2024-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 35aee01ff43d7eb6c2caa0b94e7cc6c45baeeab7 Commit 35aee01ff43d ("wifi: wilc1000: set atomic flag on kmemdup in srcu critical section") was preparatory to the SRCU to RCU conversion done by commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU"). This conversion brought issues and so has been reverted, so the atomic flag is not needed anymore. Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-2-bce096e0798c@bootlin.com
| * Revert "wifi: wilc1000: convert list management to RCU"Alexis Lothoré2024-06-015-45/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f236464f1db7bea80075e6e31ac70dc6eb80547f Commit f236464f1db7 ("wifi: wilc1000: convert list management to RCU") replaced SRCU with RCU, aiming to simplify RCU usage in the driver. No documentation or commit history hinted about why SRCU has been preferred in original design, so it has been assumed to be safe to do this conversion. Unfortunately, some static analyzers raised warnings, confirmed by runtime checker, not long after the merge. At least three different issues arose when switching to RCU: - wilc_wlan_txq_filter_dup_tcp_ack is executed in a RCU read critical section yet calls wait_for_completion_timeout - wilc_wfi_init_mon_interface calls kmalloc and register_netdevice while manipulating a vif retrieved from vif list - set_channel sends command to chip (and so, also waits for a completion) while holding a vif retrieved from vif list (so, in RCU read critical section) Some of those issues are not trivial to fix and would need bigger driver rework. Fix those issues by reverting the SRCU to RCU conversion commit Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/3b46ec7c-baee-49fd-b760-3bc12fb12eaf@moroto.mountain/ Fixes: f236464f1db7 ("wifi: wilc1000: convert list management to RCU") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240528-wilc_revert_srcu_to_rcu-v1-1-bce096e0798c@bootlin.com
| * Merge tag 'ath-current-20240531' of ↵Kalle Valo2024-06-014-22/+44
| |\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath Merge ath-current from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 6.10. Two fixes for user reported regressions in ath11k. One dependency fix and one error path fix.
| | * wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz APBaochen Qiang2024-05-231-13/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") ath11k fails to connect to 6 GHz AP. This is because currently ath11k checks AP's power type in ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage. However with above commit power type is not available until ASSOC stage. As a result power type check fails and therefore connection fails. Fix this by moving power type check to ASSOC stage, also move regulatory rules update there because it depends on power type. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@quicinc.com
| | * wifi: ath11k: fix WCN6750 firmware crash caused by 17 num_vdevsCarl Huang2024-05-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WCN6750 firmware crashes because of num_vdevs changed from 4 to 17 in ath11k_init_wmi_config_qca6390() as the ab->hw_params.num_vdevs is 17. This is caused by commit f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") which assigns ab->hw_params.num_vdevs directly to config->num_vdevs in ath11k_init_wmi_config_qca6390(), therefore WCN6750 firmware crashes as it can't support such a big num_vdevs. Fix it by assign 3 to num_vdevs in hw_params for WCN6750 as 3 is sufficient too. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01371-QCAMSLSWPLZ-1 Fixes: f019f4dff2e4 ("wifi: ath11k: support 2 station interfaces") Reported-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> Closes: https://lore.kernel.org/r/D15TIIDIIESY.D1EKKJLZINMA@fairphone.com/ Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520030757.2209395-1-quic_cjhuang@quicinc.com
| | * wifi: ath10k: fix QCOM_RPROC_COMMON dependencyDmitry Baryshkov2024-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If ath10k_snoc is built-in, while Qualcomm remoteprocs are built as modules, compilation fails with: /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init': drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier' /usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit': drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier' Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it's built as module if QCOM_RPROC_COMMON is built as module too. Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org
| | * wifi: ath11k: Fix error path in ath11k_pcic_ext_irq_configBreno Leitao2024-05-171-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If one of the dummy allocation fails in ath11k_pcic_ext_irq_config(), the previous allocated devices might leak due to returning without deallocating the devices. Instead of returning on the error path, deallocate all the previously allocated net_devices and then return. Fixes: bca592ead825 ("wifi: ath11k: allocate dummy net_device dynamically") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240508185902.70975-1-leitao@debian.org
| * | wifi: iwlwifi: mvm: don't read past the mfuart notifcationEmmanuel Grumbach2024-05-291-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case the firmware sends a notification that claims it has more data than it has, we will read past that was allocated for the notification. Remove the print of the buffer, we won't see it by default. If needed, we can see the content with tracing. This was reported by KFENCE. Fixes: bdccdb854f2f ("iwlwifi: mvm: support MFUART dump in case of MFUART assert") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.ba82a01a559e.Ia91dd20f5e1ca1ad380b95e68aebf2794f553d9b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: Fix scan abort handling with HW rfkillIlan Peer2024-05-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When HW rfkill is toggled to disable the RF, the flow to stop scan is called. When trying to send the command to abort the scan, since HW rfkill is toggled, the command is not sent due to rfkill being asserted, and -ERFKILL is returned from iwl_trans_send_cmd(), but this is silently ignored in iwl_mvm_send_cmd() and thus the scan abort flow continues to wait for scan complete notification and fails. Since it fails, the UID to type mapping is not cleared, and thus a warning is later fired when trying to stop the interface. To fix this, modify the UMAC scan abort flow to force sending the scan abort command even when in rfkill, so stop the FW from accessing the radio etc. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.8cbe2f8c1a97.Iffe235c12a919dafec88eef399eb1f7bae2c5bdb@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: check n_ssids before accessing the ssidsMiri Korenblit2024-05-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some versions of cfg80211, the ssids poinet might be a valid one even though n_ssids is 0. Accessing the pointer in this case will cuase an out-of-bound access. Fix this by checking n_ssids first. Fixes: c1a7515393e4 ("iwlwifi: mvm: add adaptive dwell support") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Link: https://msgid.link/20240513132416.6e4d1762bf0d.I5a0e6cc8f02050a766db704d15594c61fe583d45@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: properly set 6 GHz channel direct probe optionAyala Beker2024-05-291-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ensure that the 6 GHz channel is configured with a valid direct BSSID, avoiding any invalid or multicast BSSID addresses. Signed-off-by: Ayala Beker <ayala.beker@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.91a631a0fe60.I2ea2616af9b8a2eaf959b156c69cf65a2f1204d4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: handle BA session teardown in RF-killJohannes Berg2024-05-293-6/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When entering RF-kill, mac80211 tears down BA sessions, but due to RF-kill the commands aren't sent to the device. As a result, there can be frames pending on the reorder buffer or perhaps even received while doing so, leading to warnings. Avoid the warnings by doing the BA session teardown normally even in RF-kill, which also requires queue sync. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.0762cd80fb3d.I43c5877f3b546159b2db4f36d6d956b333c41cf0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: Handle BIGTK cipher in kek_kck cmdYedidya Benshimol2024-05-291-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BIGTK cipher field was added to the kek_kck_material_cmd but wasn't assigned. Fix that by differentiating between the IGTK/BIGTK keys and assign the ciphers fields accordingly. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.7fd0b22b7267.Ie9b581652b74bd7806980364d59e1b2e78e682c0@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: remove stale STA link data during restartBenjamin Berg2024-05-293-5/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If pre-recovery mac80211 tried to disable a link but this disablement failed, then there might be a mismatch between mac80211 assuming the link has been disabled and the driver still having the data around. During recover itself, that is not a problem, but should the link be activated again at a later point, iwlwifi will refuse the activation as it detects the inconsistent state. Solve this corner-case by iterating the station in the restart cleanup handler. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240513132416.d2fd60338055.I840d4fdce5fd49fe69896d928b071067e3730259@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: dbg_ini: move iwl_dbg_tlv_free outside of debugfs ifdefShahar S Matityahu2024-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver should call iwl_dbg_tlv_free even if debugfs is not defined since ini mode does not depend on debugfs ifdef. Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: set properly mac headerMordechay Goodstein2024-05-291-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the driver we only use skb_put* for adding data to the skb, hence data never moves and skb_reset_mac_haeder would set mac_header to the first time data was added and not to mac80211 header, fix this my using the actual len of bytes added for setting the mac header. Fixes: 3f7a9d577d47 ("wifi: iwlwifi: mvm: simplify by using SKB MAC header pointer") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.12f2de2909c3.I72a819b96f2fe55bde192a8fd31a4b96c301aa73@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: revert gen2 TX A-MPDU size to 64Johannes Berg2024-05-291-7/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't actually support >64 even for HE devices, so revert back to 64. This fixes an issue where the session is refused because the queue is configured differently from the actual session later. Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.52f7b4cf83aa.If47e43adddf7fe250ed7f5571fbb35d8221c7c47@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| * | wifi: iwlwifi: mvm: d3: fix WoWLAN command version lookupYedidya Benshimol2024-05-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After moving from commands to notificaitons in the d3 resume flow, removing the WOWLAN_GET_STATUSES and REPLY_OFFLOADS_QUERY_CMD causes the return of the default value when looking up their version. Returning zero here results in the driver sending the not supported NON_QOS_TX_COUNTER_CMD. Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240510170500.8cabfd580614.If3a0db9851f56041f8f5360959354abd5379224a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-19 23:06:34 +0100