summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl/sunxi (unfollow)
Commit message (Collapse)AuthorFilesLines
2017-06-03rtc: remove rtc_device.nameAlexandre Belloni2-5/+3
rtc->name is only used in messages were it is superfluous. Remove it completely from the structure. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: ds1307: avoid using rtc-nameAlexandre Belloni1-1/+1
ds1307->rtc->name is a copy of ds1307->name, use it instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: pcf8563: avoid using rtc->nameAlexandre Belloni1-1/+1
pcf8563->rtc->name is a copy of pcf8563_driver.driver.name, use it instead Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: dev: remove rtc->name from debug messageAlexandre Belloni1-1/+1
rtc->name is superfluous here because the rtc is already registered at that point and its name has already been printed. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: sysfs: make name uniformAlexandre Belloni1-1/+2
The name sysfs attribute is not useful in its current form because of all the drivers: - 3 are using the feature correctly - 2 are clearly misusing it - 60 are using driver.name, either directly or indirectly - 46 are using pdev->name - 8 are using client->name - 31 are using a variation of driver.name (addition or removal of rtc-, -rtc, _rtc, rtc_) Make it uniform and use the driver name and the device name. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc.txt: standardize document formatMauro Carvalho Chehab1-21/+23
Each text file under Documentation follows a different format. Some doesn't even have titles! Change its representation to follow the adopted standard, using ReST markups for it to be parseable by Sphinx: - adjust identation of the titles; - mark a table as such; - don't capitalize chapter names. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: interface: Validate alarm-time before handling rolloverVaibhav Jain1-1/+8
In function __rtc_read_alarm() its possible for an alarm time-stamp to be invalid even after replacing missing components with current time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this case and will cause the call to 'rtc_tm_to_time64(&alarm->time)' return a negative value for variable t_alm. While handling alarm rollover this negative t_alm (assumed to seconds offset from '1970-01-01 00:00:00') is converted back to rtc_time via rtc_time64_to_tm() which results in this error log with seemingly garbage values: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" This error was generated when the rtc driver (rtc-opal in this case) returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that the alarm is disabled. Though I have submitted a separate fix for the rtc-opal driver, this issue may potentially impact other existing/future rtc drivers. To fix this issue the patch validates the alarm time-stamp just after filling up the missing datetime components and if rtc_valid_tm() still reports it to be invalid then bails out of the function without handling the rollover. Reported-by: Steve Best <sbest@redhat.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: opal: Handle disabled TPO in opal_get_tpo_time()Vaibhav Jain1-0/+10
On PowerNV platform when Timed-Power-On(TPO) is disabled, read of stored TPO yields value with all date components set to '0' inside opal_get_tpo_time(). The function opal_to_tm() then converts it to an offset from year 1900 yielding alarm-time == "1900-00-01 00:00:00". This causes problems with __rtc_read_alarm() that expecting an offset from "1970-00-01 00:00:00" and returned alarm-time results in a -ve value for time64_t. Which ultimately results in this error reported in kernel logs with a seemingly garbage value: "rtc rtc0: invalid alarm value: -2-1--1041528741 2005511117:71582844:32" We fix this by explicitly handling the case of all alarm date-time components being '0' inside opal_get_tpo_time() and returning -ENOENT in such a case. This signals generic rtc that no alarm is set and it bails out from the alarm initialization flow without reporting the above error. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Reported-by: Steve Best <sbest@redhat.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: m41t80: add clock provider supportGary Bisson1-0/+172
Some devices supported by the m41t80 driver have a programmable square-wave output signal (see M41T80_FEATURE_SQ). This enables to use this feature as a clock provider of common clock framework. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: m41t80: remove sqw sysfs entryGary Bisson1-88/+0
In order to use the proper clock framework to control this feature. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: m41t80: fix SQW dividers override when setting a dateGary Bisson1-0/+12
This patch is only relevant for RTC with the SQ_ALT feature which means the clock output frequency divider is stored in the weekday register. Current implementation discards the previous dividers value and clear them as soon as the time is set. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: m41t80: fix SQWE override when setting an alarmGary Bisson1-0/+3
Currently setting an alarm clears the SQWE bit which means that the clock output is disabled no matter its previous state. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-31rtc: rtc-ds1307: enable support for mcp794xx as a wakeup source without IRQDavid Lowe1-1/+2
This patch extends the fixes for ds1337, ds1339, ds3231 in commit 8bc2a40730ec ("rtc: ds1307: add support for the DT property 'wakeup-source'") to mcp794xx devices, so that those parts can similarly be used as a wakeup source without an IRQ to the processor. Tested on Raspberry Pi ZeroW with MCP79400. Signed-off-by: David Lowe <dave-lowe@ntlworld.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-26rtc: ds1307: convert driver to regmapHeiner Kallweit1-382/+221
This patch converts the ds1307 driver to using regmap. It's a rather big patch and I can test with DS3231 only. With this chip it's working fine. I'd appreciate if people with other supported hardware could test as well. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-13Linux 4.12-rc1v4.12-rc1Linus Torvalds1-2/+2
2017-05-13mm, docs: update memory.stat description with workingset* entriesRoman Gushchin1-0/+12
Commit 4b4cea91691d ("mm: vmscan: fix IO/refault regression in cache workingset transition") introduced three new entries in memory stat file: - workingset_refault - workingset_activate - workingset_nodereclaim This commit adds a corresponding description to the cgroup v2 docs. Link: http://lkml.kernel.org/r/1494530293-31236-1-git-send-email-guro@fb.com Signed-off-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm: vmscan: scan until it finds eligible pagesMinchan Kim1-6/+15
Although there are a ton of free swap and anonymous LRU page in elgible zones, OOM happened. balloon invoked oom-killer: gfp_mask=0x17080c0(GFP_KERNEL_ACCOUNT|__GFP_ZERO|__GFP_NOTRACK), nodemask=(null), order=0, oom_score_adj=0 CPU: 7 PID: 1138 Comm: balloon Not tainted 4.11.0-rc6-mm1-zram-00289-ge228d67e9677-dirty #17 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: oom_kill_process+0x21d/0x3f0 out_of_memory+0xd8/0x390 __alloc_pages_slowpath+0xbc1/0xc50 __alloc_pages_nodemask+0x1a5/0x1c0 pte_alloc_one+0x20/0x50 __pte_alloc+0x1e/0x110 __handle_mm_fault+0x919/0x960 handle_mm_fault+0x77/0x120 __do_page_fault+0x27a/0x550 trace_do_page_fault+0x43/0x150 do_async_page_fault+0x2c/0x90 async_page_fault+0x28/0x30 Mem-Info: active_anon:424716 inactive_anon:65314 isolated_anon:0 active_file:52 inactive_file:46 isolated_file:0 unevictable:0 dirty:27 writeback:0 unstable:0 slab_reclaimable:3967 slab_unreclaimable:4125 mapped:133 shmem:43 pagetables:1674 bounce:0 free:4637 free_pcp:225 free_cma:0 Node 0 active_anon:1698864kB inactive_anon:261256kB active_file:208kB inactive_file:184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:532kB dirty:108kB writeback:0kB shmem:172kB writeback_tmp:0kB unstable:0kB all_unreclaimable? no DMA free:7316kB min:32kB low:44kB high:56kB active_anon:8064kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB writepending:0kB present:15992kB managed:15908kB mlocked:0kB slab_reclaimable:464kB slab_unreclaimable:40kB kernel_stack:0kB pagetables:24kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB lowmem_reserve[]: 0 992 992 1952 DMA32 free:9088kB min:2048kB low:3064kB high:4080kB active_anon:952176kB inactive_anon:0kB active_file:36kB inactive_file:0kB unevictable:0kB writepending:88kB present:1032192kB managed:1019388kB mlocked:0kB slab_reclaimable:13532kB slab_unreclaimable:16460kB kernel_stack:3552kB pagetables:6672kB bounce:0kB free_pcp:56kB local_pcp:24kB free_cma:0kB lowmem_reserve[]: 0 0 0 959 Movable free:3644kB min:1980kB low:2960kB high:3940kB active_anon:738560kB inactive_anon:261340kB active_file:188kB inactive_file:640kB unevictable:0kB writepending:20kB present:1048444kB managed:1010816kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:832kB local_pcp:60kB free_cma:0kB lowmem_reserve[]: 0 0 0 0 DMA: 1*4kB (E) 0*8kB 18*16kB (E) 10*32kB (E) 10*64kB (E) 9*128kB (ME) 8*256kB (E) 2*512kB (E) 2*1024kB (E) 0*2048kB 0*4096kB = 7524kB DMA32: 417*4kB (UMEH) 181*8kB (UMEH) 68*16kB (UMEH) 48*32kB (UMEH) 14*64kB (MH) 3*128kB (M) 1*256kB (H) 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 9836kB Movable: 1*4kB (M) 1*8kB (M) 1*16kB (M) 1*32kB (M) 0*64kB 1*128kB (M) 2*256kB (M) 4*512kB (M) 1*1024kB (M) 0*2048kB 0*4096kB = 3772kB 378 total pagecache pages 17 pages in swap cache Swap cache stats: add 17325, delete 17302, find 0/27 Free swap = 978940kB Total swap = 1048572kB 524157 pages RAM 0 pages HighMem/MovableOnly 12629 pages reserved 0 pages cma reserved 0 pages hwpoisoned [ pid ] uid tgid total_vm rss nr_ptes nr_pmds swapents oom_score_adj name [ 433] 0 433 4904 5 14 3 82 0 upstart-udev-br [ 438] 0 438 12371 5 27 3 191 -1000 systemd-udevd With investigation, skipping page of isolate_lru_pages makes reclaim void because it returns zero nr_taken easily so LRU shrinking is effectively nothing and just increases priority aggressively. Finally, OOM happens. The problem is that get_scan_count determines nr_to_scan with eligible zones so although priority drops to zero, it couldn't reclaim any pages if the LRU contains mostly ineligible pages. get_scan_count: size = lruvec_lru_size(lruvec, lru, sc->reclaim_idx); size = size >> sc->priority; Assumes sc->priority is 0 and LRU list is as follows. N-N-N-N-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H-H (Ie, small eligible pages are in the head of LRU but others are almost ineligible pages) In that case, size becomes 4 so VM want to scan 4 pages but 4 pages from tail of the LRU are not eligible pages. If get_scan_count counts skipped pages, it doesn't reclaim any pages remained after scanning 4 pages so it ends up OOM happening. This patch makes isolate_lru_pages try to scan pages until it encounters eligible zones's pages. [akpm@linux-foundation.org: clean up mind-bending `for' statement. Tweak comment text] Fixes: 3db65812d688 ("Revert "mm, vmscan: account for skipped pages as a partial scan"") Link: http://lkml.kernel.org/r/1494457232-27401-1-git-send-email-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm, thp: copying user pages must schedule on collapseDavid Rientjes1-4/+3
We have encountered need_resched warnings in __collapse_huge_page_copy() while doing {clear,copy}_user_highpage() over HPAGE_PMD_NR source pages. mm->mmap_sem is held for write, but the iteration is well bounded. Reschedule as needed. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705101426380.109808@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13dax: fix PMD data corruption when fault races with writeRoss Zwisler1-14/+14
This is based on a patch from Jan Kara that fixed the equivalent race in the DAX PTE fault path. Currently DAX PMD read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pmd_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add huge zero page to the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6ef6258 ("dax: Call ->iomap_begin without entry lock during dax fault") Link: http://lkml.kernel.org/r/20170510172700.18991-1-ross.zwisler@linux.intel.com Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13dax: fix data corruption when fault races with writeJan Kara1-16/+16
Currently DAX read fault can race with write(2) in the following way: CPU1 - write(2) CPU2 - read fault dax_iomap_pte_fault() ->iomap_begin() - sees hole dax_iomap_rw() iomap_apply() ->iomap_begin - allocates blocks dax_iomap_actor() invalidate_inode_pages2_range() - there's nothing to invalidate grab_mapping_entry() - we add zero page in the radix tree and map it to page tables The result is that hole page is mapped into page tables (and thus zeros are seen in mmap) while file has data written in that place. Fix the problem by locking exception entry before mapping blocks for the fault. That way we are sure invalidate_inode_pages2_range() call for racing write will either block on entry lock waiting for the fault to finish (and unmap stale page tables after that) or read fault will see already allocated blocks by write(2). Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956 Link: http://lkml.kernel.org/r/20170510085419.27601-5-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13ext4: return to starting transaction in ext4_dax_huge_fault()Jan Kara1-4/+17
DAX will return to locking exceptional entry before mapping blocks for a page fault to fix possible races with concurrent writes. To avoid lock inversion between exceptional entry lock and transaction start, start the transaction already in ext4_dax_huge_fault(). Fixes: 9f141d6ef6258a3a37a045842d9ba7e68f368956 Link: http://lkml.kernel.org/r/20170510085419.27601-4-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm: fix data corruption due to stale mmap readsJan Kara2-2/+12
Currently, we didn't invalidate page tables during invalidate_inode_pages2() for DAX. That could result in e.g. 2MiB zero page being mapped into page tables while there were already underlying blocks allocated and thus data seen through mmap were different from data seen by read(2). The following sequence reproduces the problem: - open an mmap over a 2MiB hole - read from a 2MiB hole, faulting in a 2MiB zero page - write to the hole with write(3p). The write succeeds but we incorrectly leave the 2MiB zero page mapping intact. - via the mmap, read the data that was just written. Since the zero page mapping is still intact we read back zeroes instead of the new data. Fix the problem by unconditionally calling invalidate_inode_pages2_range() in dax_iomap_actor() for new block allocations and by properly invalidating page tables in invalidate_inode_pages2_range() for DAX mappings. Fixes: c6dcf52c23d2d3fb5235cec42d7dd3f786b87d55 Link: http://lkml.kernel.org/r/20170510085419.27601-3-jack@suse.cz Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13dax: prevent invalidation of mapped DAX entriesRoss Zwisler3-36/+3
Patch series "mm,dax: Fix data corruption due to mmap inconsistency", v4. This series fixes data corruption that can happen for DAX mounts when page faults race with write(2) and as a result page tables get out of sync with block mappings in the filesystem and thus data seen through mmap is different from data seen through read(2). The series passes testing with t_mmap_stale test program from Ross and also other mmap related tests on DAX filesystem. This patch (of 4): dax_invalidate_mapping_entry() currently removes DAX exceptional entries only if they are clean and unlocked. This is done via: invalidate_mapping_pages() invalidate_exceptional_entry() dax_invalidate_mapping_entry() However, for page cache pages removed in invalidate_mapping_pages() there is an additional criteria which is that the page must not be mapped. This is noted in the comments above invalidate_mapping_pages() and is checked in invalidate_inode_page(). For DAX entries this means that we can can end up in a situation where a DAX exceptional entry, either a huge zero page or a regular DAX entry, could end up mapped but without an associated radix tree entry. This is inconsistent with the rest of the DAX code and with what happens in the page cache case. We aren't able to unmap the DAX exceptional entry because according to its comments invalidate_mapping_pages() isn't allowed to block, and unmap_mapping_range() takes a write lock on the mapping->i_mmap_rwsem. Since we essentially never have unmapped DAX entries to evict from the radix tree, just remove dax_invalidate_mapping_entry(). Fixes: c6dcf52c23d2 ("mm: Invalidate DAX radix tree entries only if appropriate") Link: http://lkml.kernel.org/r/20170510085419.27601-2-jack@suse.cz Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> [4.10+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13Tigran has movedAndrew Morton6-7/+7
Cc: Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm, vmalloc: fix vmalloc users tracking properlyMichal Hocko3-17/+26
Commit 1f5307b1e094 ("mm, vmalloc: properly track vmalloc users") has pulled asm/pgtable.h include dependency to linux/vmalloc.h and that turned out to be a bad idea for some architectures. E.g. m68k fails with In file included from arch/m68k/include/asm/pgtable_mm.h:145:0, from arch/m68k/include/asm/pgtable.h:4, from include/linux/vmalloc.h:9, from arch/m68k/kernel/module.c:9: arch/m68k/include/asm/mcf_pgtable.h: In function 'nocache_page': >> arch/m68k/include/asm/mcf_pgtable.h:339:43: error: 'init_mm' undeclared (first use in this function) #define pgd_offset_k(address) pgd_offset(&init_mm, address) as spotted by kernel build bot. nios2 fails for other reason In file included from include/asm-generic/io.h:767:0, from arch/nios2/include/asm/io.h:61, from include/linux/io.h:25, from arch/nios2/include/asm/pgtable.h:18, from include/linux/mm.h:70, from include/linux/pid_namespace.h:6, from include/linux/ptrace.h:9, from arch/nios2/include/uapi/asm/elf.h:23, from arch/nios2/include/asm/elf.h:22, from include/linux/elf.h:4, from include/linux/module.h:15, from init/main.c:16: include/linux/vmalloc.h: In function '__vmalloc_node_flags': include/linux/vmalloc.h:99:40: error: 'PAGE_KERNEL' undeclared (first use in this function); did you mean 'GFP_KERNEL'? which is due to the newly added #include <asm/pgtable.h>, which on nios2 includes <linux/io.h> and thus <asm/io.h> and <asm-generic/io.h> which again includes <linux/vmalloc.h>. Tweaking that around just turns out a bigger headache than necessary. This patch reverts 1f5307b1e094 and reimplements the original fix in a different way. __vmalloc_node_flags can stay static inline which will cover vmalloc* functions. We only have one external user (kvmalloc_node) and we can export __vmalloc_node_flags_caller and provide the caller directly. This is much simpler and it doesn't really need any games with header files. [akpm@linux-foundation.org: coding-style fixes] [mhocko@kernel.org: revert old comment] Link: http://lkml.kernel.org/r/20170509211054.GB16325@dhcp22.suse.cz Fixes: 1f5307b1e094 ("mm, vmalloc: properly track vmalloc users") Link: http://lkml.kernel.org/r/20170509153702.GR6481@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm/khugepaged: add missed tracepoint for collapse_huge_page_swapinSeongJae Park1-1/+3
One return case of `__collapse_huge_page_swapin()` does not invoke tracepoint while every other return case does. This commit adds a tracepoint invocation for the case. Link: http://lkml.kernel.org/r/20170507101813.30187-1-sj38.park@gmail.com Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13gcov: support GCC 7.1Martin Liska2-1/+9
Starting from GCC 7.1, __gcov_exit is a new symbol expected to be implemented in a profiling runtime. [akpm@linux-foundation.org: coding-style fixes] [mliska@suse.cz: v2] Link: http://lkml.kernel.org/r/e63a3c59-0149-c97e-4084-20ca8f146b26@suse.cz Link: http://lkml.kernel.org/r/8c4084fa-3885-29fe-5fc4-0d4ca199c785@suse.cz Signed-off-by: Martin Liska <mliska@suse.cz> Acked-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13mm, vmstat: Remove spurious WARN() during zoneinfo printReza Arbab1-2/+0
After commit e2ecc8a79ed4 ("mm, vmstat: print non-populated zones in zoneinfo"), /proc/zoneinfo will show unpopulated zones. A memoryless node, having no populated zones at all, was previously ignored, but will now trigger the WARN() in is_zone_first_populated(). Remove this warning, as its only purpose was to warn of a situation that has since been enabled. Aside: The "per-node stats" are still printed under the first populated zone, but that's not necessarily the first stanza any more. I'm not sure which criteria is more important with regard to not breaking parsers, but it looks a little weird to the eye. Fixes: e2ecc8a79ed4 ("mm, vmstat: print node-based stats in zoneinfo file") Link: http://lkml.kernel.org/r/1493854905-10918-1-git-send-email-arbab@linux.vnet.ibm.com Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13time: delete current_fs_time()Deepa Dinamani2-15/+0
All uses of the current_fs_time() function have been replaced by other time interfaces. And, its use cases can be fulfilled by current_time() or ktime_get_* variants. Link: http://lkml.kernel.org/r/1491613030-11599-13-git-send-email-deepa.kernel@gmail.com Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-13hwpoison, memcg: forcibly uncharge LRU pagesMichal Hocko2-1/+8
Laurent Dufour has noticed that hwpoinsoned pages are kept charged. In his particular case he has hit a bad_page("page still charged to cgroup") when onlining a hwpoison page. While this looks like something that shouldn't happen in the first place because onlining hwpages and returning them to the page allocator makes only little sense it shows a real problem. hwpoison pages do not get freed usually so we do not uncharge them (at least not since commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API")). Each charge pins memcg (since e8ea14cc6ead ("mm: memcontrol: take a css reference for each charged page")) as well and so the mem_cgroup and the associated state will never go away. Fix this leak by forcibly uncharging a LRU hwpoisoned page in delete_from_lru_cache(). We also have to tweak uncharge_list because it cannot rely on zero ref count for these pages. [akpm@linux-foundation.org: coding-style fixes] Fixes: 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") Link: http://lkml.kernel.org/r/20170502185507.GB19165@dhcp22.suse.cz Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-12sound: Disable the build of OSS driversTakashi Iwai1-0/+1
OSS drivers are left as badly unmaintained, and now we're facing a problem to clean up the hackish set_fs() usage in their codes. Since most of drivers have been covered by ALSA, and the others are dead old and inactive, let's leave them RIP. This patch is the first step: disable the build of OSS drivers. We'll eventually drop the whole codes and clean up later. Note that sound/oss/dmasound is still kept, since it's a completely different implementation of OSS, and it doesn't suffer from set_fs() hack. Moreover, the build of ALSA is disabled on M68K by some reason, thus disabling it shall result in a regression. This one will be disabled / removed once when we add the support in ALSA side. Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-12drm/i915: Make vblank evade warnings optionalVille Syrjälä2-2/+18
Add a new Kconfig option to enable/disable the extra warnings from the vblank evade code. For now we'll keep the warning about an actually missed vblank always enabled as that can have an actual user visible impact. But if we miss the deadline othrwise there's no real need to bother the user with that. We'll want these warnings enabled during development however so that we can catch regressions. Based on the reports it looks like this is still very easy to hit on SKL, so we have more work ahead of us to optimize the crtiical section further. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reported-by: Jens Axboe <axboe@kernel.dk> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: e1edbd44e23b ("drm/i915: Complain if we take too long under vblank evasion.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-05-12Input: cros_ec_keyb - remove extraneous 'const'Arnd Bergmann1-1/+1
gcc-7 warns about 'const SIMPLE_DEV_PM_OPS', as that macro already contains a 'const' keyword: drivers/input/keyboard/cros_ec_keyb.c:663:14: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const SIMPLE_DEV_PM_OPS(cros_ec_keyb_pm_ops, NULL, cros_ec_keyb_resume); This removes the extra one. Fixes: 6af6dc2d2aa6 ("input: Add ChromeOS EC keyboard driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-05-12drm/nouveau/therm: remove ineffective workarounds for alarm bugsBen Skeggs4-4/+4
These were ineffective due to touching the list without the alarm lock, but should no longer be required. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: avoid processing completed alarms when adding a new oneBen Skeggs1-3/+13
The idea here was to avoid having to "manually" program the HW if there's a new earliest alarm. This was lazy and bad, as it leads to loads of fun races between inter-related callers (ie. therm). Turns out, it's not so difficult after all. Go figure ;) Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: fix corruption of the pending list when rescheduling an alarmBen Skeggs1-7/+10
At least therm/fantog "attempts" to work around this issue, which could lead to corruption of the pending alarm list. Fix it properly by not updating the timestamp without the lock held, or trying to add an already pending alarm to the pending alarm list.... Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: handle races with hw when updating the next alarm timeBen Skeggs1-10/+16
If the time to the next alarm is short enough, we could race with HW and end up with an ~4 second delay until it triggers. Fix this by checking again after we update HW. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/tmr: ack interrupt before processing alarmsBen Skeggs1-1/+1
Fixes a race where we can miss an alarm that triggers while we're already processing previous alarms. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
2017-05-12drm/nouveau/core: fix static checker warningBen Skeggs1-1/+1
object->engine cannot be NULL, it's either valid, or an error pointer. This particular condition shouldn't actually be possible, but just in case, we'll keep it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-12drm/nouveau/fb/ram/gf100-: remove 0x10f200 readBen Skeggs1-1/+0
This reg has moved on Pascal, and causes a bus fault. We never use the value anyway, so just remove the read. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-12drm/nouveau/kms/nv50: skip core channel cursor update on position-only changesBen Skeggs1-3/+7
The DRM core used to only call prepare_fb/cleanup_fb() when a plane's framebuffer changed, which achieved the desired effect. It's apparently now up to the driver to decide on its own. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [4.11+]
2017-05-12drm/nouveau/kms/nv50: fix source-rect-only plane updatesBen Skeggs1-5/+3
This "optimisation" (which was originally meant to skip updating cursor settings in the core channel on position-only updates) turned out to be pointless in the final design of the code before it was merged. Remove it completely, as it breaks other cases. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org [4.10+]
2017-05-11drm/nouveau/kms/nv50: remove pointless argument to window atomic_check_acquire()Ben Skeggs1-7/+6
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2017-05-11doc: replace FTP URL to kernel.org with HTTPS oneMichael Heimpold1-1/+1
FTP services were shutdown some weeks ago, so the FTP URL does not work anymore. Fix this by replacing it with corresponding HTTPS URL. Signed-off-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-05-11block: handle partial completions for special payload requestsChristoph Hellwig1-12/+12
SCSI devices can return short writes on Write Same just like for normal writes, so we need to handle this case for our special payload requests as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-05-11xen: adjust early dom0 p2m handling to xen hypervisor behaviorJuergen Gross1-3/+4
When booted as pv-guest the p2m list presented by the Xen is already mapped to virtual addresses. In dom0 case the hypervisor might make use of 2M- or 1G-pages for this mapping. Unfortunately while being properly aligned in virtual and machine address space, those pages might not be aligned properly in guest physical address space. So when trying to obtain the guest physical address of such a page pud_pfn() and pmd_pfn() must be avoided as those will mask away guest physical address bits not being zero in this special case. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-11x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under XenJuergen Gross2-3/+3
When running as Xen pv guest X86_BUG_SYSRET_SS_ATTRS must not be set on AMD cpus. This bug/feature bit is kind of special as it will be used very early when switching threads. Setting the bit and clearing it a little bit later leaves a critical window where things can go wrong. This time window has enlarged a little bit by using setup_clear_cpu_cap() instead of the hypervisor's set_cpu_features callback. It seems this larger window now makes it rather easy to hit the problem. The proper solution is to never set the bit in case of Xen. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-11arm64: Silence first allocation with CONFIG_ARM64_MODULE_PLTS=yFlorian Fainelli1-1/+6
When CONFIG_ARM64_MODULE_PLTS is enabled, the first allocation using the module space fails, because the module is too big, and then the module allocation is attempted from vmalloc space. Silence the first allocation failure in that case by setting __GFP_NOWARN. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-11ARM: Silence first allocation with CONFIG_ARM_MODULE_PLTS=yFlorian Fainelli1-2/+9
When CONFIG_ARM_MODULE_PLTS is enabled, the first allocation using the module space fails, because the module is too big, and then the module allocation is attempted from vmalloc space. Silence the first allocation failure in that case by setting __GFP_NOWARN. Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-05-11mm: Silence vmap() allocation failures based on caller gfp_flagsFlorian Fainelli1-1/+1
If the caller has set __GFP_NOWARN don't print the following message: vmap allocation for size 15736832 failed: use vmalloc=<size> to increase size. This can happen with the ARM/Linux or ARM64/Linux module loader built with CONFIG_ARM{,64}_MODULE_PLTS=y which does a first attempt at loading a large module from module space, then falls back to vmalloc space. Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-24 15:57:41 +0100