summaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* xhci: harden xhci_find_next_ext_cap against device removalJoe Lawrence2016-02-051-0/+4
| | | | | | | | | | | | | | | | | | | xhci_find_next_ext_cap doesn't check for PCI hotplug removal and may use the PCI master abort bit pattern (~0) to calculate a new PCI address offset to read/write. The has lead to reproducable crashes when testing surprise removal during device initialization on a Stratus platform, at least after commit d5ddcdf4d672 ("xhci: rework xhci extended capability list parsing functions"). The crash is repeatable on a Stratus platform when injecting hardware faults to induce xHCI host controller hotplug during driver initialization. If a PCI read in xhci_find_next_ext_cap returns the master abort pattern, quirk_usb_handoff_xhci may start using a bogus ext_cap_offset to start searching more bogus PCI addresses. Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'fixes-for-v4.5-rc3' of ↵Greg Kroah-Hartman2016-02-046-31/+38
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.5-rc2 DWC3 got a fix for OTG Certification, DWC2 has two fixes for regressions on RasPI, MUSB has a NULL pointer dereference fix for ux500 platforms and two PHYs (MSM and MXS) got some minor fixes. While at that, I'm also adding a fix to my email address which has changed recently.
| * usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.Jianqiang Tang2016-02-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is needed in order to pass one test case defined in the OTG Automated Compliance Test specification. Specification location: http://www.usb.org/developers/onthego/otgeh_compliance_plan_1_2.pdf This test case uses PET Tool, and PET Tool is one USB hardware equipment provided by MQP Electronics. Test case id is 6.8.3 B-UUT Bypass Capacitance. We must set this otg flag in order to be able to return OTG descriptor during enumeration, otherwise this test case with failed with below error: "Get OTG descriptor request stalled". Signed-off-by: Jianqiang Tang <jianqiang.tang@intel.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
| * usb: dwc2: Fix probe problem on bcm2835John Youn2016-02-031-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes an issue found on Raspberry PI platform that prevents probe. Don't skip setting the force mode if it's already set. Fixes: 09c96980dc72 ("usb: dwc2: Add functions to set and clear force mode") Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
| * Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"John Youn2016-02-032-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB ethernet fails, due to being unable to pick up proper parameters when performing a plain reset before reading hw params. Below shows the results of the gnptxfsiz and hptxfsiz with and before and after reverting this (from Stefan Wahren): So here is the probe result before Patch 1 is applied: [ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000 [ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000 [ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 1.394249] dwc2 20980000.usb: DWC OTG Controller [ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000 And here is the probe result after Patch 1 is applied: [ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000 [ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000 [ 1.434301] dwc2 20980000.usb: DWC OTG Controller [ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000 Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
| * usb: musb: ux500: Fix NULL pointer dereference at system PMUlf Hansson2016-02-031-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 7d32cdef5356 ("usb: musb: fail with error when no DMA controller set"), caused the core platform driver to correctly return an error code when fail probing. Unfurtante it also caused bug for a NULL pointer dereference, during system suspend for the ux500 driver. The reason is a lacking validation of the corresponding ->driver_data pointer, which won't be set when the musb core driver fails to probe (or haven't yet been probed). Fixes: 7d32cdef5356 ("usb: musb: fail with error when no DMA...") Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
| * usb: phy: mxs: declare variable with initialized valueLi Jun2016-02-031-1/+1
| | | | | | | | | | | | | | | | | | Initialize vbus_value to be 0 since it's possible not to assign any value before judgement. Acked-by: Peter Chen <peter.chen@nxp.com Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
| * usb: phy: msm: fix error handling in probe.Srinivas Kandagatla2016-02-031-13/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver registers for extcon events as part of its probe, but never unregisters them in case of error in the probe path. There were multiple issues noticed due to this missing error handling. One of them is random crashes if the regulators are not ready yet by the time probe is invoked. Ivan's previous attempt [1] to fix this issue, did not really address all the failure cases like regualtor/get_irq failures. [1] https://lkml.org/lkml/2015/9/7/62 Without this patch the kernel would carsh with log: ... Unable to handle kernel paging request at virtual address 17d78410 pgd = ffffffc001a5c000 [17d78410] *pgd=00000000b6806003, *pud=00000000b6806003, *pmd=0000000000000000 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 6 Comm: kworker/u8:0 Not tainted 4.4.0+ #48 Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) Workqueue: deferwq deferred_probe_work_func task: ffffffc03686e900 ti: ffffffc0368b0000 task.ti: ffffffc0368b0000 PC is at raw_notifier_chain_register+0x1c/0x44 LR is at extcon_register_notifier+0x88/0xc8 pc : [<ffffffc0000da43c>] lr : [<ffffffc000606298>] pstate: 80000085 sp : ffffffc0368b3a70 x29: ffffffc0368b3a70 x28: ffffffc03680c310 x27: ffffffc035518000 x26: ffffffc035518000 x25: ffffffc03bfa20e0 x24: ffffffc035580a18 x23: 0000000000000000 x22: ffffffc035518458 x21: ffffffc0355e9a60 x20: ffffffc035518000 x19: 0000000000000000 x18: 0000000000000028 x17: 0000000000000003 x16: ffffffc0018153c8 x15: 0000000000000001 x14: ffffffc03686f0f8 x13: ffffffc03686f0f8 x12: 0000000000000003 x11: 0000000000000001 x10: 0000000000000001 x9 : ffffffc03686f0f8 x8 : 0000e3872014c1a1 x7 : 0000000000000028 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000000 x3 : 00000000354fb170 x2 : 0000000017d78400 x1 : ffffffc0355e9a60 x0 : ffffffc0354fb268 Fixes: 591fc116f330 ("usb: phy: msm: Use extcon framework for VBUS and ID detection") CC: Stable <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | xhci: Fix list corruption in urb dequeue at host removalMathias Nyman2016-02-031-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci driver frees data for all devices, both usb2 and and usb3 the first time usb_remove_hcd() is called, including td_list and and xhci_ring structures. When usb_remove_hcd() is called a second time for the second xhci bus it will try to dequeue all pending urbs, and touches td_list which is already freed for that endpoint. Cc: <stable@vger.kernel.org> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: xhci-plat: fix NULL pointer in probe for device tree caseGregory CLEMENT2016-02-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During probe, in the device tree case, the data pointer associated to a compatible is dereferenced. However, not all the compatibles are associated to a private data pointer. The generic-xhci and the xhci-platform don't need them, this patch adds a test on the data pointer before accessing it, avoiding a kernel crash. Fixes: 4efb2f694114 ("usb: host: xhci-plat: add struct xhci_plat_priv") Cc: stable@vger.kernel.org Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci-mtk: fix AHB bus hang up caused by roothubs pollingChunfeng Yun2016-02-031-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when ip fails to enter sleep mode, register access protection will be disabled, at the same time if all clocks are disabled, access register will hang up AHB bus. the common case causes ip sleep failure is that after all ports enter U3 but before ip enters sleep mode, a port receives a resume signal('K'). this will happens when such as clicks mouse to try to do remote-wakeup to stop system enter suspend. so stop polling root hubs to avoid access xHCI register on bus suspend, and restart it when bus resumes. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TTChunfeng Yun2016-02-031-3/+13
| | | | | | | | | | | | | | | | | | | | when a LS or FS device doesn't connect though a HS hub, the @bPkts field of its periodic endpoint context should be set to 1. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platformsLu Baolu2016-02-031-1/+3
| | | | | | | | | | | | | | | | | | Intel Broxton M was verifed to require XHCI_PME_STUCK_QUIRK quirk as well. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: set SSIC port unused only if xhci_suspend succeedsLu Baolu2016-02-031-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | XHCI_SSIC_PORT_UNUSED quirk was applied to the xHCI host controllers in some Intel SoC chips. With this quirk applied, SSIC port is set to "unused" prior to xhci_suspend(). This may cause problem if host fails to suspend. In this case, the port is set to unused without host further entering D3, and the port will not be usable anymore. Cc: stable@vger.kernel.org Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: add a quirk bit for ssic port unusedLu Baolu2016-02-032-34/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Two workarounds introduced by commit b8cb91e058cd ("xhci: Workaround for PME stuck issues in Intel xhci") and commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") share a single quirk bit XHCI_PME_STUCK_QUIRK. These two workarounds actually are different and might happen on different hardwares. Need to separate them by adding a quirk bit for the later. Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: handle both SSIC ports in PME stuck quirkLu Baolu2016-02-031-19/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit abce329c27b3 ("xhci: Workaround to get D3 working in Intel xHCI") adds a workaround for a limitation of PME storm caused by SSIC port in some Intel SoCs. This commit only handled one SSIC port, while there are actually two SSIC ports in the chips. This patch handles both SSIC ports. Without this fix, users still see PME storm. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "xhci: don't finish a TD if we get a short-transfer event mid TD"Mathias Nyman2016-02-031-10/+0
|/ | | | | | | | | | | | | | | | | | | | | This reverts commit e210c422b6fd ("xhci: don't finish a TD if we get a short transfer event mid TD") Turns out that most host controllers do not follow the xHCI specs and never send the second event for the last TRB in the TD if there was a short event mid-TD. Returning the URB directly after the first short-transfer event is far better than never returning the URB. (class drivers usually timeout after 30sec). For the hosts that do send the second event we will go back to treating it as misplaced event and print an error message for it. The origial patch was sent to stable kernels and needs to be reverted from there as well Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-4.5-rc2' of ↵Greg Kroah-Hartman2016-01-286-3/+49
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.5-rc2 Here are two fixes of crashes in the visor driver that could be triggered using bad (malicious) descriptors, a fix for two memory leaks in the new mxu11x0 driver, and an interface-blacklist fix for the option driver. Included are also some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: option: fix Cinterion AHxx enumerationJohn Ernberg2016-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg <john.ernberg@actia.se> Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Cc: stable <stable@vger.kernel.org> # v3.9: 8ff10bdb14a52 Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: mxu11x0: fix memory leak on usb_serial private dataMathieu OTHACEHE2016-01-251-0/+20
| | | | | | | | | | | | | | | | | | On nominal execution, private data allocated on port_probe and attach are never freed. Add port_remove and release callbacks to free them respectively. Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: ftdi_sio: add support for Yaesu SCU-18 cableGreg Kroah-Hartman2016-01-252-0/+2
| | | | | | | | | | | | | | | | | | | | | | Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden <harald.linden@7183.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: option: Adding support for Telit LE922Daniele Palmas2016-01-251-0/+16
| | | | | | | | | | | | | | | | This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: visor: fix crash on detecting device without write_urbsVladis Dronov2016-01-251-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: visor: fix null-deref at probeJohan Hovold2016-01-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: cp210x: add ID for IAI USB to RS485 adaptorPeter Dedecker2016-01-251-0/+1
| | | | | | | | | | | | | | | | | | Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker <peter.dedecker@hotmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* | usb: hub: do not clear BOS field during reset deviceDu, Changbin2016-01-251-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In function usb_reset_and_verify_device, the old BOS descriptor may still be used before allocating a new one. (usb_unlocked_disable_lpm function uses it under the situation that it fails to disable lpm.) So we cannot set the udev->bos to NULL before that, just keep what it was. It will be overwrite when allocating a new one. Crash log: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: [<ffffffff8171f98d>] usb_enable_link_state+0x2d/0x2f0 Call Trace: [<ffffffff8171ed5b>] ? usb_set_lpm_timeout+0x12b/0x140 [<ffffffff8171fcd1>] usb_enable_lpm+0x81/0xa0 [<ffffffff8171fdd8>] usb_disable_lpm+0xa8/0xc0 [<ffffffff8171fe1c>] usb_unlocked_disable_lpm+0x2c/0x50 [<ffffffff81723933>] usb_reset_and_verify_device+0xc3/0x710 [<ffffffff8172c4ed>] ? usb_sg_wait+0x13d/0x190 [<ffffffff81724743>] usb_reset_device+0x133/0x280 [<ffffffff8179ccd1>] usb_stor_port_reset+0x61/0x70 [<ffffffff8179cd68>] usb_stor_invoke_transport+0x88/0x520 Signed-off-by: Du, Changbin <changbin.du@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | cdc-acm:exclude Samsung phone 04e8:685dOliver Neukum2016-01-251-0/+5
| | | | | | | | | | | | | | | | | | This phone needs to be handled by a specialised firmware tool and is reported to crash irrevocably if cdc-acm takes it. Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: cdc-acm: send zero packet for intel 7260 modemLu Baolu2016-01-252-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | For Intel 7260 modem, it is needed for host side to send zero packet if the BULK OUT size is equal to USB endpoint max packet length. Otherwise, modem side may still wait for more data and cannot give response to host side. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: cdc-acm: handle unlinked urb in acm read callbackLu Baolu2016-01-251-1/+2
|/ | | | | | | | | | | | | | | | | | | In current acm driver, the bulk-in callback function ignores the URBs unlinked in usb core. This causes unexpected data loss in some cases. For example, runtime suspend entry will unlinked all urbs and set urb->status to -ENOENT even those urbs might have data not processed yet. Hence, data loss occurs. This patch lets bulk-in callback function handle unlinked urbs to avoid data loss. Signed-off-by: Tang Jian Qiang <jianqiang.tang@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable@vger.kernel.org Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2016-01-233-10/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull final vfs updates from Al Viro: - The ->i_mutex wrappers (with small prereq in lustre) - a fix for too early freeing of symlink bodies on shmem (they need to be RCU-delayed) (-stable fodder) - followup to dedupe stuff merged this cycle * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: abort dedupe loop if fatal signals are pending make sure that freeing shmem fast symlinks is RCU-delayed wrappers for ->i_mutex access lustre: remove unused declaration
| * wrappers for ->i_mutex accessAl Viro2016-01-233-10/+10
| | | | | | | | | | | | | | | | | | | | | | parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | Merge tag 'armsoc-tegra' of ↵Linus Torvalds2016-01-231-0/+2
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC support for Tegra platforms from Olof Johansson: "Here's a single-SoC topic branch that we've staged separately. Mainly because it was hard to sort the branch contents in a way that fit our existing branches due to some refactorings. The code has been in -next for quite a while, but we staged it in arm-soc a bit late, which is why we've kept it separate from the other updates and are sending it separately here" * tag 'armsoc-tegra' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: tegra: Add NVIDIA Jetson TX1 Developer Kit support arm64: tegra: Add NVIDIA P2597 I/O board support arm64: tegra: Add NVIDIA Jetson TX1 support arm64: tegra: Add NVIDIA P2571 board support arm64: tegra: Add NVIDIA P2371 board support arm64: tegra: Add NVIDIA P2595 I/O board support arm64: tegra: Add NVIDIA P2530 main board support arm64: tegra: Add Tegra210 support arm64: tegra: Add NVIDIA Tegra132 Norrin support arm64: tegra: Add Tegra132 support ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols
| * Merge tag 'tegra-for-4.5-soc' of ↵Olof Johansson2016-01-121-0/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into late/tegra ARM: tegra: Core SoC changes for v4.5-rc1 The big thing here is Tegra210 support, which is really only the Kconfig symbol. Other than that there's a few miscellaneous fixes. * tag 'tegra-for-4.5-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: select USB_ULPI from EHCI rather than platform ARM: tegra: Ensure entire dcache is flushed on entering LP0/1 amba: Hide TEGRA_AHB symbol soc/tegra: Add Tegra210 support soc/tegra: Provide per-SoC Kconfig symbols Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: tegra: select USB_ULPI from EHCI rather than platformArnd Bergmann2015-11-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For historic reasons, the tegra platform selects USB_ULPI from architecture code, but that hasn't really made sense for a long time, as the only user of that code is the Tegra EHCI driver that has its own Kconfig symbol. This removes the 'select' statements from mach-tegra and drivers/soc/tegra and adds them with the device driver that actually needs them. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
* | | Merge tag 'pm+acpi-4.5-rc1-2' of ↵Linus Torvalds2016-01-212-1/+13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "This includes fixes on top of the previous batch of PM+ACPI updates and some new material as well. From the new material perspective the most significant are the driver core changes that should allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand. Apart from that, ACPICA is updated to upstream revision 20160108 (cosmetic mostly, but including one fixup on top of the previous ACPICA update) and there are some devfreq updates the didn't make it before (due to timing). A few recent regressions are fixed, most importantly in the cpuidle menu governor and in the ACPI backlight driver and some x86 platform drivers depending on it. Some more bugs are fixed and cleanups are made on top of that. Specifics: - Modify the driver core and the USB subsystem to allow USB devices to stay suspended over system suspend/resume cycles if they have been runtime-suspended already beforehand and fix some bugs on top of these changes (Tomeu Vizoso, Rafael Wysocki). - Update ACPICA to upstream revision 20160108, including updates of the ACPICA's copyright notices, a code fixup resulting from a regression fix that was necessary in the upstream code only (the regression fixed by it has never been present in Linux) and a compiler warning fix (Bob Moore, Lv Zheng). - Fix a recent regression in the cpuidle menu governor that broke it on practically all architectures other than x86 and make a couple of optimizations on top of that fix (Rafael Wysocki). - Clean up the selection of cpuidle governors depending on whether or not the kernel is configured for tickless systems (Jean Delvare). - Revert a recent commit that introduced a regression in the ACPI backlight driver, address the problem it attempted to fix in a different way and revert one more cosmetic change depending on the problematic commit (Hans de Goede). - Add two more ACPI backlight quirks (Hans de Goede). - Fix a few minor problems in the core devfreq code, clean it up a bit and update the MAINTAINERS information related to it (Chanwoo Choi, MyungJoo Ham). - Improve an error message in the ACPI fan driver (Andy Lutomirski). - Fix a recent build regression in the cpupower tool (Shreyas Prabhu)" * tag 'pm+acpi-4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) cpuidle: menu: Avoid pointless checks in menu_select() sched / idle: Drop default_idle_call() fallback from call_cpuidle() cpupower: Fix build error in cpufreq-info cpuidle: Don't enable all governors by default cpuidle: Default to ladder governor on ticking systems time: nohz: Expose tick_nohz_enabled ACPICA: Update version to 20160108 ACPICA: Silence a -Wbad-function-cast warning when acpi_uintptr_t is 'uintptr_t' ACPICA: Additional 2016 copyright changes ACPICA: Reduce regression fix divergence from upstream ACPICA ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Satellite R830 ACPI / video: Revert "thinkpad_acpi: Use acpi_video_handles_brightness_key_presses()" ACPI / video: Document acpi_video_handles_brightness_key_presses() a bit ACPI / video: Fix using an uninitialized mutex / list_head in acpi_video_handles_brightness_key_presses() ACPI / video: Revert "ACPI / video: driver must be registered before checking for keypresses" ACPI / fan: Improve acpi_device_update_power error message ACPI / video: Add disable_backlight_sysfs_if quirk for the Toshiba Portege R700 cpuidle: menu: Fix menu_select() for CPUIDLE_DRIVER_STATE_START == 0 MAINTAINERS: Add devfreq-event entry MAINTAINERS: Add missing git repository and directory for devfreq ...
| * \ \ Merge branch 'pm-core'Rafael J. Wysocki2016-01-212-1/+13
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-core: driver core: Avoid NULL pointer dereferences in device_is_bound() platform: Do not detach from PM domains on shutdown USB / PM: Allow USB devices to remain runtime-suspended when sleeping PM / sleep: Go direct_complete if driver has no callbacks PM / Domains: add setter for dev.pm_domain device core: add device_is_bound()
| | * | | USB / PM: Allow USB devices to remain runtime-suspended when sleepingTomeu Vizoso2016-01-082-1/+13
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Have dev_pm_ops.prepare return 1 for USB devices and ports so that USB devices can remain runtime-suspended when the system goes to a sleep state, if their wakeup state is correct and they have runtime PM enabled. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | Merge branch 'for-next' of ↵Linus Torvalds2016-01-217-2121/+2504
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - Introduce configfs support for unlocked configfs_depend_item() (krzysztof + andrezej) - Conversion of usb-gadget target driver to new function registration interface (andrzej + sebastian) - Enable qla2xxx FC target mode support for Extended Logins (himansu + giridhar) - Enable qla2xxx FC target mode support for Exchange Offload (himansu + giridhar) - Add qla2xxx FC target mode irq affinity notification + selective command queuing. (quinn + himanshu) - Fix iscsi-target deadlock in se_node_acl configfs deletion (sagi + nab) - Convert se_node_acl configfs deletion + se_node_acl->queue_depth to proper se_session->sess_kref + target_get_session() usage. (hch + sagi + nab) - Fix long-standing race between se_node_acl->acl_kref get and get_initiator_node_acl() lookup. (hch + nab) - Fix target/user block-size handling, and make sure netlink reaches all network namespaces (sheng + andy) Note there is an outstanding bug-fix series for remote I_T nexus port TMR LUN_RESET has been posted and still being tested, and will likely become post -rc1 material at this point" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (56 commits) scsi: qla2xxxx: avoid type mismatch in comparison target/user: Make sure netlink would reach all network namespaces target: Obtain se_node_acl->acl_kref during get_initiator_node_acl target: Convert ACL change queue_depth se_session reference usage iscsi-target: Fix potential dead-lock during node acl delete ib_srpt: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Convert acl lookup to modern get_initiator_node_acl usage tcm_fc: Wait for command completion before freeing a session target: Fix a memory leak in target_dev_lba_map_store() target: Support aborting tasks with a 64-bit tag usb/gadget: Remove set-but-not-used variables target: Remove an unused variable target: Fix indentation in target_core_configfs.c target/user: Allow user to set block size before enabling device iser-target: Fix non negative ERR_PTR isert_device_get usage target/fcoe: Add tag support to tcm_fc qla2xxx: Check for online flag instead of active reset when transmitting responses qla2xxx: Set all queues to 4k qla2xxx: Disable ZIO at start time. qla2xxx: Move atioq to a different lock to reduce lock contention ...
| * | | | usb/gadget: Remove set-but-not-used variablesBart Van Assche2016-01-071-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid that building with W=1 triggers compiler warnings about set-but-not-used variables. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Andy Grover <agrover@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: f_tcm: add configfs supportAndrzej Pietrasiewicz2015-12-212-4/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow using the tcm function as a component of a gadget composed with ConfigFS. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: f_tcm: use usb_gstrings_attachAndrzej Pietrasiewicz2015-12-211-11/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not directly use file static strings definitions in instances of f_tcm. Instead use usb_gstrings_attach. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: f_tcm: remove redundant singletonAndrzej Pietrasiewicz2015-12-212-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only instance is guaranteed with TPG_INSTANCES defined to 1. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: f_tcm: remove compatibility layerAndrzej Pietrasiewicz2015-12-211-81/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are no old function interface users left. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: convert to use new function registration interfaceAndrzej Pietrasiewicz2015-12-212-10/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the only user of old tcm function interface so that the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: f_tcm: convert to new function interface with backward ↵Andrzej Pietrasiewicz2015-12-216-5/+339
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compatibility Converting tcm to the new function interface requires converting USB tcm's function code and its users. This patch converts the f_tcm.c to the new function interface. The file can be now compiled into a separate module usb_f_tcm.ko. The old function interface is provided by means of preprocessor conditional directives. After all users are converted, the old interface can be removed. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: factor out f_tcmAndrzej Pietrasiewicz2015-12-213-2129/+2148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for converting tcm to new function registration interface. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: simplify attribute store functionAndrzej Pietrasiewicz2015-12-211-15/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify function code. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: use strtobool for a boolean valueAndrzej Pietrasiewicz2015-12-211-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the function. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: follow naming conventionsAndrzej Pietrasiewicz2015-12-211-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for splitting tcm_usb_gadget into legacy gadget proper and f_tcm. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | usb: gadget: tcm: split string definitions into function and deviceAndrzej Pietrasiewicz2015-12-212-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prepare for factoring out f_tcm from a legacy gadget. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-27 20:23:30 +0100