summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [media] dw2102: add support for TeVii S662Olli Salonen2016-03-031-6/+17
| | | | | | | | TeVii S662 is a USB 2.0 DVB-S2 tuner that's identical to TechnoTrend S2-4600 tuner. Add the USB ID to dw2102 driver. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dw2102: ts2020 included twiceOlli Salonen2016-03-031-1/+0
| | | | | | | ts2020.h was already included a few lines earlier. Remove the unnecessary entry. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dvb-core: fix return code checking for devices with CAOlli Salonen2016-03-031-1/+1
| | | | | | | | | | The test for the return code was mistakenly inverted. This caused DVB devices with CA module to fail on modprobe. Tested with TechnoTrend CT2-4650 CI USB tuner. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] Staging: media/lirc: lirc_zilog.c : fixed a string split in ↵RitwikGopi2016-03-031-3/+1
| | | | | | | | | | multi-line issue Fixed a quoted string split in to multiple line issue(Actually fixed 2 warnings since it was split in to 3 lines.) Signed-off-by: Ritwik G <ritwikgopi@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx24120: make sure tuner is locked at get_frontendJemma Denson2016-03-031-1/+3
| | | | | | | | | | | | Change get_frontend to re-check current lock status rather than relying on a cached value from get_status. Removes potential for tuning failure if get_frontend is called during tuning. Probably not too essential as other changes work around this: https://patchwork.linuxtv.org/patch/32845/ Signed-off-by: Jemma Denson <jdenson@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: add support for Terratec Grabby Record ledMatthieu Rogez2016-03-031-0/+11
| | | | | | | | Terratec Grabby (hw rev 2) Record led is connected to GPIO 3 and its logic is inverted: (PIO3 = 0: on, PIO3 = 1: off). Signed-off-by: Matthieu Rogez <matthieu.rogez@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: add support for Terratec Grabby REC buttonMatthieu Rogez2016-03-031-0/+1
| | | | | | | | Terratec Grabby (hw rev 2) REC button uses the standard snapshot button configuration. Signed-off-by: Matthieu Rogez <matthieu.rogez@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] saa7134: fix warning with !MEDIA_CONTROLLERArnd Bergmann2016-03-031-2/+2
| | | | | | | | | | | | | | | When CONFIG_MEDIA_CONTROLLER is disabled, we get a warning about an unused function: drivers/media/pci/saa7134/saa7134-core.c:832:13: error: 'saa7134_create_entities' defined but not used [-Werror=unused-function] This moves the #ifdef outside of the function, as it is never called here. Fixes: ac90aa02d5b9 ("[media] saa7134: add media controller support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] em28xx: restore lost #ifdefArnd Bergmann2016-03-031-0/+2
| | | | | | | | | | | | | | | | | The cleanup that changed the em28xx driver to use v4l2_mc_create_media_graph instead of its own implementation causes a build error when CONFIG_MEDIA_CONTROLLER is disabled: drivers/media/usb/em28xx/em28xx-video.c: In function 'em28xx_v4l2_init': drivers/media/usb/em28xx/em28xx-video.c:2717:38: error: 'struct em28xx' has no member named 'media_dev' This puts the new code inside the same #ifdef that controls the presence of the 'media_dev' member, and that the old code was in. Fixes: de39078779cb ("[media] em2xx: use v4l2_mc_create_media_graph()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] coda: fix error path in case of missing pdata on non-DT platformPhilipp Zabel2016-03-031-6/+4
| | | | | | | | | | | | If we bail out this early, v4l2_device_register() has not been called yet, so no need to call v4l2_device_unregister(). Fixes: b7bd660a51f0 ("[media] coda: Call v4l2_device_unregister() from a single location") Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: Properly handle user pointersSakari Ailus2016-03-031-4/+4
| | | | | | | | Mark pointers containing user pointers as such. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: Move media_get_uptr() macro out of the media.h user space headerSakari Ailus2016-03-031-0/+5
| | | | | | | | | The media_get_uptr() macro is mostly useful only for the IOCTL handling code in media-device.c so move it there. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] usb: musb: sunxi: support module autoloadingEmilio López2016-03-031-0/+1
| | | | | | | | | | | MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on sunxi systems using the OTG controller. This commit adds the missing line so it loads automatically when building it as a module and running on a system with an USB OTG port. Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rc: sunxi-cir: support module autoloadingEmilio López2016-03-031-0/+1
| | | | | | | | | | | MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on systems supporting infrared. This commit adds the missing line so it works out of the box when built as a module and running on a sunxi system with an infrared receiver. Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] staging: v4l: omap4iss: Use V4L2 graph PM operationsSakari Ailus2016-03-034-226/+7
| | | | | | | | | | Power on devices represented by entities in the graph through the pipeline state using V4L2 graph PM operations instead of what was in the omap3isp driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l: omap3isp: Use V4L2 graph PM operationsSakari Ailus2016-03-034-225/+6
| | | | | | | | | | Power on devices represented by entities in the graph through the pipeline state using V4L2 graph PM operations instead of what was in the omap3isp driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] v4l: Add generic pipeline power management codeSakari Ailus2016-03-031-1/+182
| | | | | | | | | | | | | | When the Media controller framework was merged, it was decided not to add pipeline power management code for it was not seen generic. As a result, a number of drivers have copied the same piece of code, with same bugfixes done to them at different points of time (or not at all). Add these functions to V4L2. Their use is optional for drivers. [mchehab@osg.samsung.com: Fix merge conflicts] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: Always keep a graph walk large enough aroundSakari Ailus2016-03-031-0/+21
| | | | | | | | | | | | | Re-create the graph walk object as needed in order to have one large enough available for all entities in the graph. This enumeration is used for pipeline power management in the future. [mchehab@osg.samsung.com: fix documentation bug: " warning: bad line: graph_mutex"] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] cx23885: incorrect I2C bus used in the CI registrationOlli Salonen2016-03-031-2/+2
| | | | | | | | | | | | This patch fixes a bug that was introduced by the commit: commit 2b0aac3011bc7a9db27791bed4978554263ef079 Author: Mauro Carvalho Chehab <mchehab@osg.samsung.com> [media] cx23885: move CI/MAC registration to a separate function Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] igorplugusb: fix leaks in error pathSean Young2016-03-031-5/+12
| | | | | | | | | Since rc_allocate_device() uses kmalloc, it can returns NULL, so need to check, otherwise, NULL derefenrece can happen. Reported-by: Insu Yun <wuninsu@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: au0828 enable the right media source when input changesShuah Khan2016-03-031-1/+9
| | | | | | | | | | | Change vidioc_s_input() to enable the media source for the newly selected input. v4l2-core enables source before calling au0828's vidioc_s_input() handler. Hence, when input selection changes, media source for the newly selected input needs to be enabled. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
* [media] cx23885: fix reversed I2C bus numberingOlli Salonen2016-03-031-6/+6
| | | | | | | | | I2C buses for DVBSky T980C and S950C were numbered in an opposite way compared to every other board in the driver. Switch numbering to a more logical way. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dw2102: convert TechnoTrend S2-4600 to use I2C binding for demodOlli Salonen2016-03-031-28/+43
| | | | | | | | Convert the TT S2-4600 USB tuner to use the I2C binding for attaching the demodulator instead of the old m88ds3103_attach method. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl2832: move stats polling to read statusAntti Palosaari2016-03-032-50/+30
| | | | | | | | Do statistics polling on read status in order to avoid unnecessary delayed work. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl2832: improve slave TS controlAntti Palosaari2016-03-033-46/+54
| | | | | | | | Add callback parameter to select enable / disable slave TS and use it when slave demod is in use. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mn88473: finalize driverAntti Palosaari2016-03-033-163/+246
| | | | | | | | | | | Finalize the driver. It still lacks a lot of features, like all statistics and PLP filtering, but basic functionality and sensitivity is pretty good shape. Signed-off-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mn88473: move out of stagingAntti Palosaari2016-03-039-36/+9
| | | | | | | Move driver to drivers. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] saa7134: Add support for Snazio TvPVR PROGEORGE2016-03-033-1/+59
| | | | | | | | This board has PCI ID: 1779:13cf [mchehab@osg.samsung.com: Make scripts/checkpatch.pl happy] Signed-off-by: Pojar George <geoubuntu@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: au0828 set ctrl_input in au0828_s_input()Shuah Khan2016-03-031-2/+8
| | | | | | | | | | | | | | | | dev->ctrl_input is set in vidioc_s_input() and doesn't get set in au0828_s_input(). As a result, dev->ctrl_input is left uninitialized until user space calls s_input. It works correctly because the default input value is 0 and which is what dev->ctrl_input gets initialized via kzalloc(). Change to set dev->ctrl_input in au0828_s_input(). Also optimize vidioc_s_input() to return if the new input value is same as the current. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] Fix AverMedia RM-KS remote keymapPhilippe Valembois2016-03-031-28/+28
| | | | | | | | | Fix AverMedia RM-KS keymap using user guide to meet LinuxTV wiki rules. The remote command didn't seem to change in itself since its creation: it's just to make keys more standard and remove the FIXME. Signed-off-by: Philippe Valembois <lephilousophe@users.sourceforge.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] Add support for Avermedia AverTV Volar HD 2 (TD110)Philippe Valembois2016-03-032-0/+3
| | | | | | Signed-off-by: Philippe Valembois <lephilousophe@users.sourceforge.net> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: rc: nuvoton: support reading / writing wakeup sequence via sysfsHeiner Kallweit2016-03-032-0/+88
| | | | | | | | | | | | | | | | | This patch adds a binary attribute /sys/class/rc/rc?/wakeup_data which allows to read / write the wakeup sequence. In combination with the core extension for exposing the most recent raw packet this allows to easily define and set a wakeup sequence. At least on my Zotac CI321 the BIOS resets the wakeup sequence at each boot to a factory default. Therefore I use a udev rule SUBSYSTEM=="rc", DRIVERS=="nuvoton-cir", ACTION=="add", RUN+="<script>" with the script basically doing cat <stored wakeup sequence> >/sys${DEVPATH}/wakeup_data Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] soc_camera/mx3_camera.c: move to staging in preparation, for removalHans Verkuil2016-03-037-10/+21
| | | | | | | | | | | | | This driver is deprecated: it should become a stand-alone driver instead of using the soc-camera framework. Unless someone is willing to take this on (unlikely with such ancient hardware) it is going to be removed from the kernel soon. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] soc_camera/mx2_camera.c: move to staging in preparation, for removalHans Verkuil2016-03-037-10/+18
| | | | | | | | | | | | | This driver is deprecated: it should become a stand-alone driver instead of using the soc-camera framework. Unless someone is willing to take this on (unlikely with such ancient hardware) it is going to be removed from the kernel soon. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] soc_camera/omap1: move to staging in preparation for removalHans Verkuil2016-03-037-11/+19
| | | | | | | | | | | | | | This driver is deprecated: it needs to be converted to vb2 and it should become a stand-alone driver instead of using the soc-camera framework. Unless someone is willing to take this on (unlikely with such ancient hardware) it is going to be removed from the kernel soon. Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] vivid: support new multiplanar YUV formatsHans Verkuil2016-03-032-2/+69
| | | | | | | | Add support for the new YUV422M, YVU422M, YUV444M and YVU444M formats. This allows applications to check their support for these formats. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] coda: add support for firmware files named as distributed by NXPPhilipp Zabel2016-03-032-17/+47
| | | | | | | | | Try loading the firmware from firmware files named vpu_fw_imx*.bin, as they are originally distributed by NXP. Fall back to v4l-coda*-imx6*.bin. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] adv7604: fix SPA register location for ADV7612Ulrich Hecht2016-03-031-1/+2
| | | | | | | | SPA location LSB register is at 0x70. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] coda: add support for native order firmware files with Freescale headerPhilipp Zabel2016-03-031-2/+33
| | | | | | | | | | | | | Freescale distribute their VPU firmware files with a 16 byte header in BIT processor native order. This patch allows to detect the header and to reorder the firmware on the fly. With this patch it should be possible to use the distributed vpu_fw_imx{53,6q,6d}.bin files directly after renaming them to v4l-coda*-imx{53,6q,6dl}.bin. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] V4L: fix a confusing function nameGuennadi Liakhovetski2016-03-031-4/+6
| | | | | | | | | is_state_active_or_queued() actually returns true if the buffer's state is neither active nore queued. Rename it for clarity. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] atmel-isi: Fix bad usage of IS_ERR_VALUEGuenter Roeck2016-03-031-2/+2
| | | | | | | | | | | | | | | | | | | | IS_ERR_VALUE() assumes that its parameter is an unsigned long. It can not be used to check if an unsigned int reflects an error. Doing so can result in the following build warning. drivers/media/platform/soc_camera/atmel-isi.c: In function "atmel_isi_probe": include/linux/err.h:21:38: warning: comparison is always false due to limited range of data type drivers/media/platform/soc_camera/atmel-isi.c:1089:6: note: in expansion of macro "IS_ERR_VALUE" If that warning is seen, the return value from platform_get_irq() is not checked for errors. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] pxa_camera: conversion to dmaengineRobert Jarzmik2016-03-032-229/+174
| | | | | | | | | | | | | | | Convert pxa_camera to dmaengine. This removes all DMA registers manipulation in favor of the more generic dmaengine API. The functional level should be the same as before. The biggest change is in the sg_split() function, which splits a videobuf-dma into several scatterlists for 3 planes captures (Y, U, V). Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> [g.liakhovetski@gmx.de: fix a function prototype, use bool, struct init] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] pxa_camera: trivial move of dma irq functionsRobert Jarzmik2016-03-031-18/+24
| | | | | | | | | | | This moves the dma irq handling functions up in the source file, so that they are available before DMA preparation functions. It prepares the conversion to DMA engine, where the descriptors are populated with these functions as callbacks. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] pxa_camera: move interrupt to taskletRobert Jarzmik2016-03-031-15/+29
| | | | | | | | | | | In preparation for dmaengine conversion, move the camera interrupt handling into a tasklet. This won't change the global flow, as this interrupt is only used to detect the end of frame and activate DMA fifos handling. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] pxa_camera: fix the buffer free pathRobert Jarzmik2016-03-031-11/+5
| | | | | | | | | | Fix the error path where the video buffer wasn't allocated nor mapped. In this case, in the driver free path don't try to unmap memory which was not mapped in the first place. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mx3_camera: use %pad format string for dma_ddr_tArnd Bergmann2016-03-031-6/+6
| | | | | | | | | | | | | | | | | | | The mx3_camera driver prints DMA addresses using the "%x" format string, which is wrong when using a 64-bit dma_addr_t definition: media/platform/soc_camera/mx3_camera.c: In function 'mx3_cam_dma_done': media/platform/soc_camera/mx3_camera.c:149:125: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_queue': media/platform/soc_camera/mx3_camera.c:317:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] media/platform/soc_camera/mx3_camera.c: In function 'mx3_videobuf_release': media/platform/soc_camera/mx3_camera.c:346:119: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t {aka long long unsigned int}' [-Werror=format=] This changes the code to use the special %pad format string, which always does the right thing. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] soc_camera: rcar_vin: Add ARGB8888 caputre format supportKoji Matsuoka2016-03-031-10/+29
| | | | | | | | | This patch adds ARGB8888 capture format support for R-Car Gen3. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] UVC: Add support for R200 depth cameraAviv Greenberg2016-03-032-0/+32
| | | | | | | | | | | | | Add support for Intel R200 depth camera in uvc driver. This includes adding new uvc GUIDs for the new pixel formats, adding new V4L pixel format definition to user api headers, and updating the uvc driver GUID-to-4cc tables with the new formats. Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com> Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: use v4l2_mc_create_media_graph()Mauro Carvalho Chehab2016-03-032-99/+25
| | | | | | | There's no reason to implement its own function to create the media graph. So, use the core one. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: use standard demod pads structMauro Carvalho Chehab2016-03-035-19/+11
| | | | | | | | As we want au0828 to use the core function to create the MC graphs, use enum demod_pad_index instead of enum au8522_media_pads. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-23 02:13:57 +0100