summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* netdevsim: Add multi-queue supportPeilin Ye2021-07-163-9/+15
| | | | | | | | | | | | | | | | | | Currently netdevsim only supports a single queue per port, which is insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend the current sysfs interface so that users can create ports with multiple queues: $ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port. Note, this is compatible with the current interface, with default number of queues set to 1. For example, echoing "2 4" creates 4 ports with 1 queue per port; echoing "2" simply creates 1 port with 1 queue. Reviewed-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bnx2x: remove unused variable 'cur_data_offset'Bill Wendling2021-07-161-6/+0
| | | | | | | | | | Fix the clang build warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1862:13: error: variable 'cur_data_offset' set but not used [-Werror,-Wunused-but-set-variable] dma_addr_t cur_data_offset; Signed-off-by: Bill Wendling <morbo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: switchdev: Simplify 'mlxsw_sp_mc_write_mdb_entry()'Christophe JAILLET2021-07-161-5/+3
| | | | | | | | | | | | | | Use 'bitmap_alloc()/bitmap_free()' instead of hand-writing it. This makes the code less verbose. Also, use 'bitmap_alloc()' instead of 'bitmap_zalloc()' because the bitmap is fully overridden by a 'bitmap_copy()' call just after its allocation. While at it, remove an extra and unneeded space. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gve: fix the wrong AdminQ buffer overflow checkHaiyue Wang2021-07-161-2/+4
| | | | | | | | | | The 'tail' pointer is also free-running count, so it needs to be masked as 'adminq_prod_cnt' does, to become an index value of AdminQ buffer. Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* bus: mhi: pci-generic: configurable network interface MRURichard Laing2021-07-153-2/+9
| | | | | | | | | | | | | | | | | | | | | The MRU value used by the MHI MBIM network interface affects the throughput performance of the interface. Different modem models use different default MRU sizes based on their bandwidth capabilities. Large values generally result in higher throughput for larger packet sizes. In addition if the MRU used by the MHI device is larger than that specified in the MHI net device the data is fragmented and needs to be re-assembled which generates a (single) warning message about the fragmented packets. Setting the MRU on both ends avoids the extra processing to re-assemble the packets. This patch allows the documented MRU for a modem to be automatically set as the MHI net device MRU avoiding fragmentation and improving throughput performance. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'net-5.14-rc2' of ↵Linus Torvalds2021-07-1484-1813/+2210
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ...
| * sfc: add logs explaining XDP_TX/REDIRECT is not availableÍñigo Huguet2021-07-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | If it's not possible to allocate enough channels for XDP, XDP_TX and XDP_REDIRECT don't work. However, only a message saying that not enough channels were available was shown, but not saying what are the consequences in that case. The user didn't know if he/she can use XDP or not, if the performance is reduced, or what. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: ensure correct number of XDP queuesÍñigo Huguet2021-07-131-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 99ba0ea616aa ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") intended to fix a problem caused by a round up when calculating the number of XDP channels and queues. However, this was not the real problem. The real problem was that the number of XDP TX queues had been reduced to half in commit e26ca4b53582 ("sfc: reduce the number of requested xdp ev queues"), but the variable xdp_tx_queue_count had remained the same. Once the correct number of XDP TX queues is created again in the previous patch of this series, this also can be reverted since the error doesn't actually exist. Only in the case that there is a bug in the code we can have different values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this, and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it happens again in the future. Note that the number of allocated queues can be higher than the number of used ones due to the round up, as explained in the existing comment in the code. That's why we also have to stop increasing xdp_queue_number beyond efx->xdp_tx_queue_count. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * sfc: fix lack of XDP TX queues - error XDP TX failed (-22)Íñigo Huguet2021-07-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: e26ca4b53582 sfc: reduce the number of requested xdp ev queues The buggy commit intended to allocate less channels for XDP in order to be more unlikely to reach the limit of 32 channels of the driver. The idea was to use each IRQ/eventqeue for more XDP TX queues than before, calculating which is the maximum number of TX queues that one event queue can handle. For example, in EF10 each event queue could handle up to 8 queues, better than the 4 they were handling before the change. This way, it would have to allocate half of channels than before for XDP TX. The problem is that the TX queues are also contained inside the channel structs, and there are only 4 queues per channel. Reducing the number of channels means also reducing the number of queues, resulting in not having the desired number of 1 queue per CPU. This leads to getting errors on XDP_TX and XDP_REDIRECT if they're executed from a high numbered CPU, because there only exist queues for the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low numbered CPU, the error doesn't happen. This is the error in the logs (repeated many times, even rate limited): sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) This errors happens in function efx_xdp_tx_buffers, where it expects to have a dedicated XDP TX queue per CPU. Reverting the change makes again more likely to reach the limit of 32 channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT will be possible at all, and we will have this log error messages: At interface probe: sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32) At every subsequent XDP_TX/REDIRECT failure, rate limited: sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) However, without reverting the change, it makes the user to think that everything is OK at probe time, but later it fails in an unpredictable way, depending on the CPU that handles the packet. It is better to restore the predictable behaviour. If the user sees the error message at probe time, he/she can try to configure the best way it fits his/her needs. At least, he/she will have 2 options: - Accept that XDP_TX/REDIRECT is not available (he/she may not need it) - Load sfc module with modparam 'rss_cpus' with a lower number, thus creating less normal RX queues/channels, letting more free resources for XDP, with some performance penalty. Anyway, let the calculation of maximum TX queues that can be handled by a single event queue, and use it only if it's less than the number of TX queues per channel. This doesn't happen in practice, but could happen if some constant values are tweaked in the future, such us EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE. Related mailing list thread: https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/ Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fddi: fix UAF in fza_probePavel Skripkin2021-07-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. Fixes: 61414f5ec983 ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: sja1105: fix address learning getting disabled on the CPU portVladimir Oltean2021-07-131-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In May 2019 when commit 640f763f98c2 ("net: dsa: sja1105: Add support for Spanning Tree Protocol") was introduced, the comment that "STP does not get called for the CPU port" was true. This changed after commit 0394a63acfe2 ("net: dsa: enable and disable all ports") in August 2019 and went largely unnoticed, because the sja1105_bridge_stp_state_set() method did nothing different compared to the static setup done by sja1105_init_mac_settings(). With the ability to turn address learning off introduced by the blamed commit, there is a new priv->learn_ena port mask in the driver. When sja1105_bridge_stp_state_set() gets called and we are in BR_STATE_LEARNING or later, address learning is enabled or not depending on priv->learn_ena & BIT(port). So what happens is that priv->learn_ena is not being set from anywhere for the CPU port, and the static configuration done by sja1105_init_mac_settings() is being overwritten. To solve this, acknowledge that the static configuration of STP state is no longer necessary because the STP state is being set by the DSA core now, but what is necessary is to set priv->learn_ena for the CPU port. Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ocelot: fix switchdev objects synced for wrong netdev with LAG offloadVladimir Oltean2021-07-131-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | The point with a *dev and a *brport_dev is that when we have a LAG net device that is a bridge port, *dev is an ocelot net device and *brport_dev is the bonding/team net device. The ocelot net device beneath the LAG does not exist from the bridge's perspective, so we need to sync the switchdev objects belonging to the brport_dev and not to the dev. Fixes: e4bd44e89dcf ("net: ocelot: replay switchdev events when joining bridge") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * octeontx2-pf: Fix uninitialized boolean variable ppsColin Ian King2021-07-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In the case where act->id is FLOW_ACTION_POLICE and also act->police.rate_bytes_ps > 0 or act->police.rate_pkt_ps is not > 0 the boolean variable pps contains an uninitialized value when function otx2_tc_act_set_police is called. Fix this by initializing pps to false. Addresses-Coverity: ("Uninitialized scalar variable)" Fixes: 68fbff68dbea ("octeontx2-pf: Add police action for TC flower") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specificRandy Dunlap2021-07-126-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Martin Schiller <ms@dev.tdt.de> Cc: linux-x25@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340Marek Behún2021-07-111-5/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems that we cannot differentiate 88X3310 from 88X3340 by simply looking at bit 3 of revision ID. This only works on revisions A0 and A1. On revision B0, this bit is always 1. Instead use the 3.d00d register for differentiation, since this register contains information about number of ports on the device. Fixes: 9885d016ffa9 ("net: phy: marvell10g: add separate structure for 88X3340") Signed-off-by: Marek Behún <kabel@kernel.org> Reported-by: Matteo Croce <mcroce@linux.microsoft.com> Tested-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * dsa: fix for_each_child.cocci warningskernel test robot2021-07-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | For_each_available_child_of_node should have of_node_put() before return around line 423. Generated by: scripts/coccinelle/iterators/for_each_child.cocci CC: Alexander Lobakin <alobakin@pm.me> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@inria.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * virtio_net: check virtqueue_add_sgs() return valueYunjian Wang2021-07-101-1/+7
| | | | | | | | | | | | | | | | As virtqueue_add_sgs() can fail, we should check the return value. Addresses-Coverity-ID: 1464439 ("Unchecked return value") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: ti: fix UAF in tlan_remove_onePavel Skripkin2021-07-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qcom/emac: fix UAF in emac_removePavel Skripkin2021-07-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function. Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: moxa: fix UAF in moxart_mac_probePavel Skripkin2021-07-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of netdev registration failure the code path will jump to init_fail label: init_fail: netdev_err(ndev, "init failed\n"); moxart_mac_free_memory(ndev); irq_map_fail: free_netdev(ndev); return ret; So, there is no need to call free_netdev() before jumping to error handling path, since it can cause UAF or double-free bug. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Ensure all TX/RX queues DMAs are disabledFlorian Fainelli2021-07-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | Make sure that we disable each of the TX and RX queues in the TDMA and RDMA control registers. This is a correctness change to be symmetrical with the code that enables the TX and RX queues. Tested-by: Maxime Ripard <maxime@cerno.tech> Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: microchip: sparx5: fix kconfig warningRandy Dunlap2021-07-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend on OF since 'select' does not follow any dependencies. WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y] Selected by [y]: - SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y] Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: linux-arm-kernel@lists.infradead.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
| * cxgb4: fix IRQ free race during driver unloadShahjada Abul Husain2021-07-082-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IRQs are requested during driver's ndo_open() and then later freed up in disable_interrupts() during driver unload. A race exists where driver can set the CXGB4_FULL_INIT_DONE flag in ndo_open() after the disable_interrupts() in driver unload path checks it, and hence misses calling free_irq(). Fix by unregistering netdevice first and sync with driver's ndo_open(). This ensures disable_interrupts() checks the flag correctly and frees up the IRQs properly. Fixes: b37987e8db5f ("cxgb4: Disable interrupts and napi before unregistering netdev") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * mt76: mt7921: continue to probe driver when fw already downloadedAaron Ma2021-07-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | When reboot system, no power cycles, firmware is already downloaded, return -EIO will break driver as error: mt7921e: probe of 0000:03:00.0 failed with error -5 Skip firmware download and continue to probe. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Fixes: 1c099ab44727c ("mt76: mt7921: add MCU support") Signed-off-by: David S. Miller <davem@davemloft.net>
| * atl1c: fix Mikrotik 10/25G NIC detectionGatis Peisenieks2021-07-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable, on rare occasions it can happen that some physical functions of the NIC do not get initialized due to timeouted early MDIO op. This changes the atl1c probe on Mikrotik 10/25G NIC not to depend on MDIO op emulation. Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ptp: Relocate lookup cookie to correct block.Jonathan Lemon2021-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | An earlier commit set the pps_lookup cookie, but the line was somehow added to the wrong code block. Correct this. Fixes: 8602e40fc813 ("ptp: Set lookup cookie when creating a PTP PPS source.") Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: Dario Binacchi <dariobin@libero.it> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: platform: Fix signedness bug in stmmac_probe_config_dt()YueHaibing2021-07-071-3/+5
| | | | | | | | | | | | | | | | | | | | The "plat->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: b9f0b2f634c0 ("net: stmmac: platform: fix probe for ACPI devices") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * stmmac: dwmac-loongson: Fix unsigned comparison to zeroYueHaibing2021-07-071-4/+5
| | | | | | | | | | | | | | | | | | plat->phy_interface is unsigned integer, so the condition can't be less than zero and the warning will never printed. Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * octeontx2-pf: Fix assigned error return value that is never usedColin Ian King2021-07-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Currently when the call to otx2_mbox_alloc_msg_cgx_mac_addr_update fails the error return variable rc is being assigned -ENOMEM and does not return early. rc is then re-assigned and the error case is not handled correctly. Fix this by returning -ENOMEM rather than assigning rc. Addresses-Coverity: ("Unused value") Fixes: 79d2be385e9e ("octeontx2-pf: offload DMAC filters to CGX/RPM block") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix incorrect return value of bond_ipsec_offload_ok()Taehee Yoo2021-07-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | bond_ipsec_offload_ok() is called to check whether the interface supports ipsec offload or not. bonding interface support ipsec offload only in active-backup mode. So, if a bond interface is not in active-backup mode, it should return false but it returns true. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()Taehee Yoo2021-07-061-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Splat looks like: WARNING: suspicious RCU usage 5.13.0-rc6+ #1179 Not tainted drivers/net/bonding/bond_main.c:571 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ping/974: #0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x1303/0x2cb0 stack backtrace: CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_offload_ok+0x1f4/0x260 [bonding] xfrm_output+0x179/0x890 xfrm4_output+0xfa/0x410 ? __xfrm4_output+0x4b0/0x4b0 ? __ip_make_skb+0xecc/0x2030 ? xfrm4_udp_encap_rcv+0x800/0x800 ? ip_local_out+0x21/0x3a0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1bfd/0x2cb0 Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: Add struct bond_ipesc to manage SATaehee Yoo2021-07-061-20/+119
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bonding has been supporting ipsec offload. When SA is added, bonding just passes SA to its own active real interface. But it doesn't manage SA. So, when events(add/del real interface, active real interface change, etc) occur, bonding can't handle that well because It doesn't manage SA. So some problems(panic, UAF, refcnt leak)occur. In order to make it stable, it should manage SA. That's the reason why struct bond_ipsec is added. When a new SA is added to bonding interface, it is stored in the bond_ipsec list. And the SA is passed to a current active real interface. If events occur, it uses bond_ipsec data to handle these events. bond->ipsec_list is protected by bond->ipsec_lock. If a current active real interface is changed, the following logic works. 1. delete all SAs from old active real interface 2. Add all SAs to the new active real interface. 3. If a new active real interface doesn't support ipsec offload or SA's option, it sets real_dev to NULL. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: disallow setting nested bonding + ipsec offloadTaehee Yoo2021-07-061-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bonding interface can be nested and it supports ipsec offload. So, it allows setting the nested bonding + ipsec scenario. But code does not support this scenario. So, it should be disallowed. interface graph: bond2 | bond1 | eth0 The nested bonding + ipsec offload may not a real usecase. So, disallowing this scenario is fine. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix suspicious RCU usage in bond_ipsec_del_sa()Taehee Yoo2021-07-061-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in ip x s f Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ip/705: #0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] #1: ffff8880075b0098 (&x->lock){+.-.}-{2:2}, at: xfrm_state_delete+0x16/0x30 stack backtrace: CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_del_sa+0x16a/0x1c0 [bonding] __xfrm_state_delete+0x51f/0x730 xfrm_state_delete+0x1e/0x30 xfrm_state_flush+0x22f/0x390 xfrm_flush_sa+0xd8/0x260 [xfrm_user] ? xfrm_flush_policy+0x290/0x290 [xfrm_user] xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ixgbevf: use xso.real_dev instead of xso.dev in callback functions of struct ↵Taehee Yoo2021-07-061-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, ixgbevf should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip link add bond0 type bond #eth0 is ixgbevf interface ip link set eth0 master bond0 ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 688 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:ixgbevf_ipsec_find_empty_idx+0x28/0x1b0 [ixgbevf] Code: 00 00 0f 1f 44 00 00 55 53 48 89 fb 48 83 ec 08 40 84 f6 0f 84 9c 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 01 0f 8e 4c 01 00 00 66 81 3b 00 04 0f RSP: 0018:ffff8880089af390 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffff8880089af4f8 R08: 0000000000000003 R09: fffffbfff4287e11 R10: 0000000000000001 R11: ffff888005de8908 R12: 0000000000000000 R13: ffff88810936a000 R14: ffff88810936a000 R15: ffff888004d78040 FS: 00007fdf9883a680(0000) GS:ffff88811a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bc14adbf40 CR3: 000000000b87c005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ixgbevf_ipsec_add_sa+0x1bf/0x9c0 [ixgbevf] ? rcu_read_lock_sched_held+0x91/0xc0 ? ixgbevf_ipsec_parse_proto_keys.isra.9+0x280/0x280 [ixgbevf] ? lock_acquire+0x191/0x720 ? bond_ipsec_add_sa+0x48/0x350 [bonding] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 ? rcu_read_lock_held+0x91/0xa0 ? rcu_read_lock_sched_held+0xc0/0xc0 bond_ipsec_add_sa+0x193/0x350 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: netdevsim: use xso.real_dev instead of xso.dev in callback functions of ↵Taehee Yoo2021-07-061-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct xfrmdev_ops There are two pointers in struct xfrm_state_offload, *dev, *real_dev. These are used in callback functions of struct xfrmdev_ops. The *dev points whether bonding interface or real interface. If bonding ipsec offload is used, it points bonding interface If not, it points real interface. And real_dev always points real interface. So, netdevsim should always use real_dev instead of dev. Of course, real_dev always not be null. Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond mode active-backup ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: BUG: spinlock bad magic on CPU#5, kworker/5:1/53 lock: 0xffff8881068c2cc8, .magic: 11121314, .owner: <none>/-1, .owner_cpu: -235736076 CPU: 5 PID: 53 Comm: kworker/5:1 Not tainted 5.13.0-rc3+ #1168 Workqueue: events linkwatch_event Call Trace: dump_stack+0xa4/0xe5 do_raw_spin_lock+0x20b/0x270 ? rwlock_bug.part.1+0x90/0x90 _raw_spin_lock_nested+0x5f/0x70 bond_get_stats+0xe4/0x4c0 [bonding] ? rcu_read_lock_sched_held+0xc0/0xc0 ? bond_neigh_init+0x2c0/0x2c0 [bonding] ? dev_get_alias+0xe2/0x190 ? dev_get_port_parent_id+0x14a/0x360 ? rtnl_unregister+0x190/0x190 ? dev_get_phys_port_name+0xa0/0xa0 ? memset+0x1f/0x40 ? memcpy+0x38/0x60 ? rtnl_phys_switch_id_fill+0x91/0x100 dev_get_stats+0x8c/0x270 rtnl_fill_stats+0x44/0xbe0 ? nla_put+0xbe/0x140 rtnl_fill_ifinfo+0x1054/0x3ad0 [ ... ] Fixes: 272c2330adc9 ("xfrm: bail early on slave pass over skb") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix null dereference in bond_ipsec_add_sa()Taehee Yoo2021-07-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If bond doesn't have real device, bond->curr_active_slave is null. But bond_ipsec_add_sa() dereferences bond->curr_active_slave without null checking. So, null-ptr-deref would occur. Test commands: ip link add bond0 type bond ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi \ 0x07 mode transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 4 PID: 680 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:bond_ipsec_add_sa+0xc4/0x2e0 [bonding] Code: 85 21 02 00 00 4d 8b a6 48 0c 00 00 e8 75 58 44 ce 85 c0 0f 85 14 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 fc 01 00 00 48 8d bb e0 02 00 00 4d 8b 2c 24 48 RSP: 0018:ffff88810946f508 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88810b4e8040 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff8fe34280 RDI: ffff888115abe100 RBP: ffff88810946f528 R08: 0000000000000003 R09: fffffbfff2287e11 R10: 0000000000000001 R11: ffff888115abe0c8 R12: 0000000000000000 R13: ffffffffc0aea9a0 R14: ffff88800d7d2000 R15: ffff88810b4e8330 FS: 00007efc5552e680(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c2530dbf40 CR3: 0000000103056004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ...] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix suspicious RCU usage in bond_ipsec_add_sa()Taehee Yoo2021-07-061-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip link add dummy0 type dummy ip link add bond0 type bond ip link set dummy0 master bond0 ip link set dummy0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \ mode transport \ reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel \ src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \ dev bond0 dir in Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/684: #0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] 55.191733][ T684] stack backtrace: CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_add_sa+0x18c/0x1f0 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: ptp: update tas basetime after ptp adjustXiaoliang Yang2021-07-052-2/+45
| | | | | | | | | | | | | | | | | | | | | | After adjusting the ptp time, the Qbv base time may be the past time of the new current time. dwmac5 hardware limited the base time cannot be set as past time. This patch add a btr_reserve to store the base time get from qopt, then calculate the base time and reset the Qbv configuration after ptp time adjust. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: add mutex lock to protect est parametersXiaoliang Yang2021-07-051-1/+11
| | | | | | | | | | | | | | | | Add a mutex lock to protect est structure parameters so that the EST parameters can be updated by other threads. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: stmmac: separate the tas basetime calculation functionXiaoliang Yang2021-07-052-13/+28
| | | | | | | | | | | | | | | | Separate the TAS basetime calculation function so that it can be called by other functions. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ptp: fix format string mismatch in ptp_sysfs.cYangbo Lu2021-07-051-2/+2
| | | | | | | | | | | | | | | | | | Fix format string mismatch in ptp_sysfs.c. Use %u for unsigned int. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * ptp: fix NULL pointer dereference in ptp_clock_registerYangbo Lu2021-07-051-1/+1
| | | | | | | | | | | | | | | | | | | | Fix NULL pointer dereference in ptp_clock_register. The argument "parent" of ptp_clock_register may be NULL pointer. Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: marvell: always set skb_shared_info in mvneta_swbm_add_rx_fragmentLorenzo Bianconi2021-07-031-10/+10
| | | | | | | | | | | | | | | | | | Always set skb_shared_info data structure in mvneta_swbm_add_rx_fragment routine even if the fragment contains only the ethernet FCS. Fixes: 039fbc47f9f1 ("net: mvneta: alloc skb_shared_info on the mvneta_rx_swbm stack") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * vmxnet3: fix cksum offload issues for tunnels with non-default udp portsRonak Doshi2021-07-021-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") added support for encapsulation offload. However, the inner offload capability is to be restricted to UDP tunnels with default Vxlan and Geneve ports. This patch fixes the issue for tunnels with non-default ports using features check capability and filtering appropriate features for such tunnels. Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <doshir@vmware.com> Acked-by: Guolin Yang <gyang@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * nfp: flower-ct: remove callback delete deadlockLouis Peens2021-07-021-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current location of the callback delete can lead to a race condition where deleting the callback requires a write_lock on the nf_table, but at the same time another thread from netfilter could have taken a read lock on the table before trying to offload. Since the driver is taking a rtnl_lock this can lead into a deadlock situation, where the netfilter offload will wait for the cls_flower rtnl_lock to be released, but this cannot happen since this is waiting for the nf_table read_lock to be released before it can delete the callback. Solve this by completely removing the nf_flow_table_offload_del_cb call, as this will now be cleaned up by act_ct itself when cleaning up the specific nf_table. Fixes: 62268e78145f ("nfp: flower-ct: add nft callback stubs") Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gve: DQO: Remove incorrect prefetchBailey Forrest2021-07-021-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The prefetch is incorrectly using the dma address instead of the virtual address. It's supposed to be: prefetch((char *)buf_state->page_info.page_address + buf_state->page_info.page_offset) However, after correcting this mistake, there is no evidence of performance improvement. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Signed-off-by: Bailey Forrest <bcf@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gve: Simplify code and axe the use of a deprecated APIChristophe JAILLET2021-07-021-8/+1
| | | | | | | | | | | | | | | | | | | | | | The wrappers in include/linux/pci-dma-compat.h should go away. Replace 'pci_set_dma_mask/pci_set_consistent_dma_mask' by an equivalent and less verbose 'dma_set_mask_and_coherent()' call. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gve: Propagate error codes to callerChristophe JAILLET2021-07-021-2/+3
| | | | | | | | | | | | | | | | | | | | If 'gve_probe()' fails, we should propagate the error code, instead of hard coding a -ENXIO value. Make sure that all error handling paths set a correct value for 'err'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * gve: Fix an error handling path in 'gve_probe()'Christophe JAILLET2021-07-021-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If the 'register_netdev() call fails, we must release the resources allocated by the previous 'gve_init_priv()' call, as already done in the remove function. Add a new label and the missing 'gve_teardown_priv_resources()' in the error handling path. Fixes: 893ce44df565 ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-22 00:55:10 +0100