summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* vhost/vsock: support MSG_EOR bit processingArseny Krasnov2021-09-051-9/+13
| | | | | | | | | | | | | | 'MSG_EOR' handling has similar logic as 'MSG_EOM' - if bit present in packet's header, reset it to 0. Then restore it back if packet processing wasn't completed. Instead of bool variable for each flag, bit mask variable was added: it has logical OR of 'MSG_EOR' and 'MSG_EOM' if needed, to restore flags, this variable is ORed with flags field of packet. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Link: https://lore.kernel.org/r/20210903123238.3273526-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
* virtio/vsock: rename 'EOR' to 'EOM' bit.Arseny Krasnov2021-09-051-6/+6
| | | | | | | | | | | | This current implemented bit is used to mark end of messages ('EOM' - end of message), not records('EOR' - end of record). Also rename 'record' to 'message' in implementation as it is different things. Signed-off-by: Arseny Krasnov <arseny.krasnov@kaspersky.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210903123109.3273053-1-arseny.krasnov@kaspersky.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* virtio: Bind virtio device to device-tree nodeViresh Kumar2021-09-051-3/+54
| | | | | | | | | | | | | Bind the virtio devices with their of_node. This will help users of the virtio devices to mention their dependencies on the device in the DT itself. Like GPIO pin users can use the phandle of the device node, or the node may contain more subnodes to add i2c or spi eeproms and other users. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/94c12705602929968477aaf27e02439eb7a7f253.1627362340.git.viresh.kumar@linaro.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa_sim: Use iova_shift() for the size passed to alloc_iova()Xie Yongji2021-09-051-1/+2
| | | | | | | | | | | | | The size passed to alloc_iova() should be the size of page frames. Now we use byte granularity for the iova domain, so it's safe to pass the size in bytes to alloc_iova(). But it would be better to use iova_shift() for the size to avoid future bugs if we change granularity. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210809100923.38-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* vhost scsi: Convert to SPDX identifierCai Huoqing2021-09-051-13/+1
| | | | | | | | | use SPDX-License-Identifier instead of a verbose license text Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210821123320.734-1-caihuoqing@baidu.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
* vdpa/mlx5: Add multiqueue supportEli Cohen2021-09-053-31/+169
| | | | | | | | | | | | | | | | | Multiqueue support requires additional virtio_net_q objects to be added or removed per the configured number of queue pairs. In addition the RQ tables needs to be modified to match the number of configured receive queues so the packets are dispatched to the right virtqueue according to the hash result. Note: qemu v6.0.0 is broken when the device requests more than two data queues; no net device will be created for the vdpa device. To avoid this, one should specify mq=off to qemu. In this case it will end up with a single queue. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-7-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: Add support for control VQ and MAC settingEli Cohen2021-09-055-32/+329
| | | | | | | | | | | | | | | | | | | | | Add support to handle control virtqueue configurations per virtio specification. The control virtqueue is implemented in software and no hardware offloading is involved. Control VQ configuration need task context, therefore all configurations are handled in a workqueue created for the purpose. Modifications are made to the memory registration code to allow for saving a copy of itolb to be used by the control VQ to access the vring. The max number of data virtqueus supported by the driver has been updated to 2 since multiqueue is not supported at this stage and we need to ensure consistency of VQ indices mapping to either data or control VQ. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: Ensure valid indices are providedEli Cohen2021-09-052-0/+55
| | | | | | | | | | | | | | | | Following patches add control virtuqeue and multiqueue support. We want to verify that the index value to callbacks referencing a virtqueue is valid. The logic defining valid indices is as follows: CVQ clear: 0 and 1. CVQ set, MQ clear: 0, 1 and 2 CVQ set, MQ set: 0..nvq where nvq is whatever provided to _vdpa_register_device() Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: Decouple virtqueue callback from struct mlx5_vdpa_virtqueueEli Cohen2021-09-051-8/+9
| | | | | | | | | | | | | Instead, define an array of struct vdpa_callback on struct mlx5_vdpa_net and use it to store callbacks for any virtqueue provided. This is required due to the fact that callback configurations arrive before feature negotiation. With control VQ and multiqueue introduced next we want to save the information until after feature negotiation where we know the CVQ index. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: function prototype modifications in preparation to control VQEli Cohen2021-09-051-19/+21
| | | | | | | | | | | Use struct mlx5_vdpa_dev as an argument to setup_driver() and a few others in preparation to control virtqueue support in a subsequent patch. The control virtqueue is part of struct mlx5_vdpa_dev so this is required. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vdpa/mlx5: Remove redundant header file inclusionEli Cohen2021-09-051-1/+0
| | | | | | | | | linux/if_vlan.h is not required. Remove it. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vDPA/ifcvf: enable multiqueue and control vqZhu Lingshan2021-09-052-17/+3
| | | | | | | | | | This commit enbales multi-queue and control vq features for ifcvf Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20210818095714.3220-3-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* vDPA/ifcvf: detect and use the onboard number of queues directlyZhu Lingshan2021-09-053-18/+21
| | | | | | | | | | | To enable this multi-queue feature for ifcvf, this commit intends to detect and use the onboard number of queues directly than IFCVF_MAX_QUEUE_PAIRS = 1 (removed) Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Link: https://lore.kernel.org/r/20210818095714.3220-2-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
* vDPA/ifcvf: implement management netlink framework for ifcvfZhu Lingshan2021-09-052-35/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | This commit implements the management netlink framework for ifcvf, including register and add / remove a device It works with iproute2: [root@localhost lszhu]# vdpa mgmtdev show -jp { "mgmtdev": { "pci/0000:01:00.5": { "supported_classes": [ "net" ] }, "pci/0000:01:00.6": { "supported_classes": [ "net" ] } } } [root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.5 name vdpa0 [root@localhost lszhu]# vdpa dev add mgmtdev pci/0000:01:00.6 name vdpa1 Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210812032454.24486-3-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* vDPA/ifcvf: introduce get_dev_type() which returns virtio dev idZhu Lingshan2021-09-051-13/+21
| | | | | | | | | | This commit introduces a new function get_dev_type() which returns the virtio device id of a device, to avoid duplicated code. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210812032454.24486-2-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2021-08-291-1/+1
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One hotfix for a NULL pointer deref in the Renesas usb clk driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference
| * clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereferenceAdam Ford2021-08-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | The probe was manually passing NULL instead of dev to devm_clk_hw_register. This caused a Unable to handle kernel NULL pointer dereference error. Fix this by passing 'dev'. Signed-off-by: Adam Ford <aford173@gmail.com> Fixes: a20a40a8bbc2 ("clk: renesas: rcar-usb2-clock-sel: Fix error handling in .probe()") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
* | Merge tag 'irq_urgent_for_v5.14' of ↵Linus Torvalds2021-08-291-0/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Borislav Petkov: - Have msix_mask_all() check a global control which says whether MSI-X masking should be done and thus make it usable on Xen-PV too * tag 'irq_urgent_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Skip masking MSI-X on Xen PV
| * | PCI/MSI: Skip masking MSI-X on Xen PVMarek Marczykowski-Górecki2021-08-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When running as Xen PV guest, masking MSI-X is a responsibility of the hypervisor. The guest has no write access to the relevant BAR at all - when it tries to, it results in a crash like this: BUG: unable to handle page fault for address: ffffc9004069100c #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation RIP: e030:__pci_enable_msix_range.part.0+0x26b/0x5f0 e1000e_set_interrupt_capability+0xbf/0xd0 [e1000e] e1000_probe+0x41f/0xdb0 [e1000e] local_pci_probe+0x42/0x80 (...) The recently introduced function msix_mask_all() does not check the global variable pci_msi_ignore_mask which is set by XEN PV to bypass the masking of MSI[-X] interrupts. Add the check to make this function XEN PV compatible. Fixes: 7d5ec3d36123 ("PCI/MSI: Mask all unused MSI-X entries") Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826170342.135172-1-marmarek@invisiblethingslab.com
* | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2021-08-281-3/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fix from James Bottomley: "A single fix for a race introduced by a fix that went into 5.14-rc5" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Fix hang of freezing queue between blocking and running device
| * | | scsi: core: Fix hang of freezing queue between blocking and running deviceLi Jinlin2021-08-251-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found a hang, the steps to reproduce are as follows: 1. blocking device via scsi_device_set_state() 2. dd if=/dev/sda of=/mnt/t.log bs=1M count=10 3. echo none > /sys/block/sda/queue/scheduler 4. echo "running" >/sys/block/sda/device/state Step 3 and 4 should complete after step 4, but they hang. CPU#0 CPU#1 CPU#2 --------------- ---------------- ---------------- Step 1: blocking device Step 2: dd xxxx ^^^^^^ get request q_usage_counter++ Step 3: switching scheculer elv_iosched_store elevator_switch blk_mq_freeze_queue blk_freeze_queue > blk_freeze_queue_start ^^^^^^ mq_freeze_depth++ > blk_mq_run_hw_queues ^^^^^^ can't run queue when dev blocked > blk_mq_freeze_queue_wait ^^^^^^ Hang here!!! wait q_usage_counter==0 Step 4: running device store_state_field scsi_rescan_device scsi_attach_vpd scsi_vpd_inquiry __scsi_execute blk_get_request blk_mq_alloc_request blk_queue_enter ^^^^^^ Hang here!!! wait mq_freeze_depth==0 blk_mq_run_hw_queues ^^^^^^ dispatch IO, q_usage_counter will reduce to zero blk_mq_unfreeze_queue ^^^^^ mq_freeze_depth-- To fix this, we need to run queue before rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210824025921.3277629-1-lijinlin3@huawei.com Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Li Jinlin <lijinlin3@huawei.com> Signed-off-by: Qiu Laibin <qiulaibin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | | Merge tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds2021-08-286-76/+89
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull USB fixes from Greg KH: "Here are a few tiny USB fixes for reported issues with some USB drivers. These fixes include: - gadget driver fixes for regressions - tcpm driver fix - dwc3 driver fixes - xhci renesas firmware loading fix, again. - usb serial option driver device id addition - usb serial ch341 revert for regression All all of these have been in linux-next with no reported problems" * tag 'usb-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: u_audio: fix race condition on endpoint stop usb: gadget: f_uac2: fixup feedback endpoint stop usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is running usb: renesas-xhci: Prefer firmware loading on unknown ROM state usb: dwc3: gadget: Stop EP0 transfers during pullup disable usb: dwc3: gadget: Fix dwc3_calc_trbs_left() Revert "USB: serial: ch341: fix character loss at high transfer rates" USB: serial: option: add new VID/PID to support Fibocom FG150
| * | | | usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet2021-08-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <stable@vger.kernel.org> Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: gadget: f_uac2: fixup feedback endpoint stopJerome Brunet2021-08-271-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the uac2 function is stopped, there seems to be an issue reported on some platforms (Intel Merrifield at least) BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0 ... Call Trace: dwc3_remove_requests.constprop.0+0x12f/0x170 __dwc3_gadget_ep_disable+0x7a/0x160 dwc3_gadget_ep_disable+0x3d/0xd0 usb_ep_disable+0x1c/0x70 u_audio_stop_capture+0x79/0x120 [u_audio] afunc_set_alt+0x73/0x80 [usb_f_uac2] composite_setup+0x224/0x1b90 [libcomposite] The issue happens only when the gadget is using the sync type "async", not "adaptive". This indicates that problem is coming from the feedback endpoint, which is only used with async synchronization mode. The problem is that request is freed regardless of usb_ep_dequeue(), which ends up badly if the request is not actually dequeued yet. Update the feedback endpoint free function to release the endpoint the same way it is done for the data endpoint, which takes care of the problem. Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Reported-by: Ferry Toth <ftoth@exalondelft.nl> Tested-by: Ferry Toth <ftoth@exalondelft.nl> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: typec: tcpm: Raise vdm_sm_running flag only when VDM SM is runningKyle Tso2021-08-261-43/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the port is going to send Discover_Identity Message, vdm_sm_running flag was intentionally set before entering Ready States in order to avoid the conflict because the port and the port partner might start AMS at almost the same time after entering Ready States. However, the original design has a problem. When the port is doing DR_SWAP from Device to Host, it raises the flag. Later in the tcpm_send_discover_work, the flag blocks the procedure of sending the Discover_Identity and it might never be cleared until disconnection. Since there exists another flag send_discover representing that the port is going to send Discover_Identity or not, it is enough to use that flag to prevent the conflict. Also change the timing of the set/clear of vdm_sm_running to indicate whether the VDM SM is actually running or not. Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable <stable@vger.kernel.org> Cc: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Kyle Tso <kyletso@google.com> Link: https://lore.kernel.org/r/20210826124201.1562502-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: renesas-xhci: Prefer firmware loading on unknown ROM stateTakashi Iwai2021-08-261-12/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent attempt to handle an unknown ROM state in the commit d143825baf15 ("usb: renesas-xhci: Fix handling of unknown ROM state") resulted in a regression and reverted later by the commit 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state""). The problem of the former fix was that it treated the failure of firmware loading as a fatal error. Since the firmware files aren't included in the standard linux-firmware tree, most users don't have them, hence they got the non-working system after that. The revert fixed the regression, but also it didn't make the firmware loading triggered even on the devices that do need it. So we need still a fix for them. This is another attempt to handle the unknown ROM state. Like the previous fix, this also tries to load the firmware when ROM shows unknown state. In this patch, however, the failure of a firmware loading (such as a missing firmware file) isn't handled as a fatal error any longer when ROM has been already detected, but it falls back to the ROM mode like before. The error is returned only when no ROM is detected and the firmware loading failed. Along with it, for simplifying the code flow, the detection and the check of ROM is factored out from renesas_fw_check_running() and done in the caller side, renesas_xhci_check_request_fw(). It avoids the redundant ROM checks. The patch was tested on Lenovo Thinkpad T14 gen (BIOS 1.34). Also it was confirmed that no regression is seen on another Thinkpad T14 machine that has worked without the patch, too. Fixes: 44cf53602f5a ("Revert "usb: renesas-xhci: Fix handling of unknown ROM state"") Cc: stable <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1189207 Link: https://lore.kernel.org/r/20210826124127.14789-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: gadget: Stop EP0 transfers during pullup disableWesley Cheng2021-08-261-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a USB cable disconnect, or soft disconnect scenario, a pending SETUP transaction may not be completed, leading to the following error: dwc3 a600000.dwc3: timed out waiting for SETUP phase If this occurs, then the entire pullup disable routine is skipped and proper cleanup and halting of the controller does not complete. Instead of returning an error (which is ignored from the UDC perspective), allow the pullup disable routine to continue, which will also handle disabling of EP0/1. This will end any active transfers as well. Ensure to clear any delayed_status also, as the timeout could happen within the STATUS stage. Fixes: bb0147364850 ("usb: dwc3: gadget: don't clear RUN/STOP when it's invalid to do so") Cc: <stable@vger.kernel.org> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210825042855.7977-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: gadget: Fix dwc3_calc_trbs_left()Thinh Nguyen2021-08-261-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can't depend on the TRB's HWO bit to determine if the TRB ring is "full". A TRB is only available when the driver had processed it, not when the controller consumed and relinquished the TRB's ownership to the driver. Otherwise, the driver may overwrite unprocessed TRBs. This can happen when many transfer events accumulate and the system is slow to process them and/or when there are too many small requests. If a request is in the started_list, that means there is one or more unprocessed TRBs remained. Check this instead of the TRB's HWO bit whether the TRB ring is full. Fixes: c4233573f6ee ("usb: dwc3: gadget: prepare TRBs on update transfers too") Cc: <stable@vger.kernel.org> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/e91e975affb0d0d02770686afc3a5b9eb84409f6.1629335416.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Revert "USB: serial: ch341: fix character loss at high transfer rates"Johan Hovold2021-08-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3c18e9baee0ef97510dcda78c82285f52626764b. These devices do not appear to send a zero-length packet when the transfer size is a multiple of the bulk-endpoint max-packet size. This means that incoming data may not be processed by the driver until a short packet is received or the receive buffer is full. Revert back to using endpoint-sized receive buffers to avoid stalled reads. Reported-by: Paul Größel <pb.g@gmx.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=214131 Fixes: 3c18e9baee0e ("USB: serial: ch341: fix character loss at high transfer rates") Cc: stable@vger.kernel.org Cc: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210824121926.19311-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * | | | USB: serial: option: add new VID/PID to support Fibocom FG150Zhengjun Zhang2021-08-241-0/+2
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fibocom FG150 is a 5G module based on Qualcomm SDX55 platform, support Sub-6G band. Here are the outputs of lsusb -v and usb-devices: > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2cb7 ProdID=010b Rev=04.14 > S: Manufacturer=Fibocom > S: Product=Fibocom Modem_SN:XXXXXXXX > S: SerialNumber=XXXXXXXX > C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA > I: If#=0x0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host > I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) > I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > Bus 002 Device 002: ID 2cb7:010b Fibocom Fibocom Modem_SN:XXXXXXXX > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 3.20 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 9 > idVendor 0x2cb7 Fibocom > idProduct 0x010b > bcdDevice 4.14 > iManufacturer 1 Fibocom > iProduct 2 Fibocom Modem_SN:XXXXXXXX > iSerial 3 XXXXXXXX > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 0x00e6 > bNumInterfaces 5 > bConfigurationValue 1 > iConfiguration 4 RNDIS_DUN_DIAG_ADB > bmAttributes 0xa0 > (Bus Powered) > Remote Wakeup > MaxPower 896mA > Interface Association: > bLength 8 > bDescriptorType 11 > bFirstInterface 0 > bInterfaceCount 2 > bFunctionClass 239 Miscellaneous Device > bFunctionSubClass 4 > bFunctionProtocol 1 > iFunction 7 RNDIS > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 239 Miscellaneous Device > bInterfaceSubClass 4 > bInterfaceProtocol 1 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 01 > ** UNRECOGNIZED: 04 24 02 00 > ** UNRECOGNIZED: 05 24 06 00 01 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x0008 1x 8 bytes > bInterval 9 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 1 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 10 CDC Data > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x8e EP 14 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x0f EP 15 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 6 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 2 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 01 00 00 > ** UNRECOGNIZED: 04 24 02 02 > ** UNRECOGNIZED: 05 24 06 00 00 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type None > Usage Type Data > wMaxPacketSize 0x000a 1x 10 bytes > bInterval 9 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 3 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 48 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x84 EP 4 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 4 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 66 > bInterfaceProtocol 1 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x03 EP 3 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x85 EP 5 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0400 1x 1024 bytes > bInterval 0 > bMaxBurst 0 > Binary Object Store Descriptor: > bLength 5 > bDescriptorType 15 > wTotalLength 0x0016 > bNumDeviceCaps 2 > USB 2.0 Extension Device Capability: > bLength 7 > bDescriptorType 16 > bDevCapabilityType 2 > bmAttributes 0x00000006 > BESL Link Power Management (LPM) Supported > SuperSpeed USB Device Capability: > bLength 10 > bDescriptorType 16 > bDevCapabilityType 3 > bmAttributes 0x00 > wSpeedsSupported 0x000f > Device can operate at Low Speed (1Mbps) > Device can operate at Full Speed (12Mbps) > Device can operate at High Speed (480Mbps) > Device can operate at SuperSpeed (5Gbps) > bFunctionalitySupport 1 > Lowest fully-functional device speed is Full Speed (12Mbps) > bU1DevExitLat 1 micro seconds > bU2DevExitLat 500 micro seconds > Device Status: 0x0000 > (Bus Powered) Signed-off-by: Zhengjun Zhang <zhangzhengjun@aicrobo.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
* | | | Merge tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-blockLinus Torvalds2021-08-283-3/+5
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block fixes from Jens Axboe: - Revert the mq-deadline priority handling, it's causing serious performance regressions. While experimental patches exists to fix this up, it's too late to do so now. Revert it and re-do it properly for 5.15 instead. - Fix a NULL vs IS_ERR() regression in this release (Dan) - Fix a mq-deadline accounting regression in this release (Bart) - Mark cryptoloop as deprecated. It's broken and dm-crypt fully supports it, and it's actively intefering with loop. Plan on removal for 5.16 (Christoph) * tag 'block-5.14-2021-08-27' of git://git.kernel.dk/linux-block: cryptoloop: add a deprecation warning pd: fix a NULL vs IS_ERR() check Revert "block/mq-deadline: Prioritize high-priority requests" mq-deadline: Fix request accounting
| * | | | cryptoloop: add a deprecation warningChristoph Hellwig2021-08-272-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for cryptoloop has been officially marked broken and deprecated in favor of dm-crypt (which supports the same broken algorithms if needed) in Linux 2.6.4 (released in March 2004), and support for it has been entirely removed from losetup in util-linux 2.23 (released in April 2013). Add a warning and a deprecation schedule. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210827163250.255325-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
| * | | | pd: fix a NULL vs IS_ERR() checkDan Carpenter2021-08-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blk_mq_alloc_disk() returns error pointers, it doesn't return NULL so correct the check. Fixes: 262d431f9000 ("pd: use blk_mq_alloc_disk and blk_cleanup_disk") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20210827100023.GB9449@kili Signed-off-by: Jens Axboe <axboe@kernel.dk>
* | | | | Merge tag 'soc-fixes-5.14-4' of ↵Linus Torvalds2021-08-282-2/+3
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Just two trivial fixes from the reset driver tree, nothing else came up since the last soc fixes" * tag 'soc-fixes-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: reset: reset-zynqmp: Fixed the argument data type reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5
| * \ \ \ \ Merge tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann2021-08-262-2/+3
| |\ \ \ \ \ | | |_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arm/fixes Reset controller fixes for v5.14 Hide the Sparx5 reset driver unless the ARCH_SPARX5 or COMPILE_TEST options are enabled, to avoid unnecessarily asking users about this driver. Fix a return value argument type in the ZynqMP reset driver. * tag 'reset-fixes-for-v5.14' of git://git.pengutronix.de/pza/linux: reset: reset-zynqmp: Fixed the argument data type reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5 Link: https://lore.kernel.org/r/e543959c5b5ee7b25686f81049bf187d602daeda.camel@pengutronix.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | reset: reset-zynqmp: Fixed the argument data typeSai Krishna Potthuri2021-08-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the data type of the variable 'val' from int to u32. Addresses-Coverity: argument of type "int *" is incompatible with parameter of type "u32 *" Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/925cebbe4eb73c7d0a536da204748d33c7100d8c.1624448778.git.michal.simek@xilinx.com Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
| | * | | | reset: RESET_MCHP_SPARX5 should depend on ARCH_SPARX5Geert Uytterhoeven2021-07-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Microchip Sparx5 switch reset block is only present on Microchip Sparx5 SoCs. Hence add a dependency on ARCH_SPARX5, to prevent asking the user about this driver when configuring a kernel without Sparx5 support. Fixes: 453ed4283bebd077 ("reset: mchp: sparx5: add switch reset driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6e08f6f46123d0712397e901716b48f13fa5dc48.1624627657.git.geert@linux-m68k.org Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
* | | | | | Merge tag 'acpi-5.14-rc8' of ↵Linus Torvalds2021-08-271-1/+1
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a regression introduced during this cycle that has been partially addressed by an earlier commit (Andy Shevchenko)" * tag 'acpi-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()
| * | | | | | media: ipu3-cio2: Drop reference on error path in cio2_bridge_connect_sensor()Andy Shevchenko2021-08-261-1/+1
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") moved adev assignment outside of error path and hence made acpi_dev_put(sensor->adev) a no-op. We still need to drop reference count on error path, and to achieve that, replace sensor->adev by locally assigned adev. Fixes: 71f642833284 ("ACPI: utils: Fix reference counting in for_each_acpi_dev_match()") Depends-on: fc68f42aa737 ("ACPI: fix NULL pointer dereference") Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | | Merge tag 'pm-5.14-rc8' of ↵Linus Torvalds2021-08-272-6/+12
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues introduced during this cycle, one of which is a regression and the other one affects new code. Specifics: - Prevent the operating performance points (OPP) code from crashing when some entries in the table of required OPPs are set to error pointer values (Marijn Suijten) - Prevent the generic power domains (genpd) framework from incorrectly overriding the performance state of a device set by its driver while it is runtime-suspended or when runtime PM of it is disabled (Dmitry Osipenko)" * tag 'pm-5.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: domains: Improve runtime PM performance state handling opp: core: Check for pending links before reading required_opp pointers
| * \ \ \ \ \ Merge branch 'pm-opp'Rafael J. Wysocki2021-08-271-4/+4
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-opp: opp: core: Check for pending links before reading required_opp pointers
| | * \ \ \ \ \ Merge branch 'opp/fixes' of ↵Rafael J. Wysocki2021-08-231-4/+4
| | |\ \ \ \ \ \ | | | |/ / / / / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm into pm-opp Pull regression fix for the operating performance points (OPP) framework for v5.15 from Viresh Kumar: "This fixes regression in the OPP core for a corner case." * 'opp/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: core: Check for pending links before reading required_opp pointers
| | | * | | | | opp: core: Check for pending links before reading required_opp pointersMarijn Suijten2021-08-231-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") dereferences the pointers in required_opp_tables but these might be set to an ERR_PTR if the list still has lazy links pending, resulting in segfaults. Prior to this patch IS_ERR was also checked on required_opp_tables[i] before reading ->is_genpd inside _opp_table_alloc_required_tables, which is at the same time the predicate to add this table to the lazy list. This segfault is solved by reordering the checks to bail on lazy pending tables before reading ->is_genpd. Fixes: 4fa82a87ba55 ("opp: Allow required-opps to be used for non genpd use cases") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
| * | | | | | | PM: domains: Improve runtime PM performance state handlingDmitry Osipenko2021-08-251-2/+8
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GENPD core doesn't support handling performance state changes while consumer device is runtime-suspended or when runtime PM is disabled. GENPD core may override performance state that was configured by device driver while RPM of the device was disabled or device was RPM-suspended. Let's close that gap by allowing drivers to control performance state while RPM of a consumer device is disabled and to set up performance state of RPM-suspended device that will be applied by GENPD core on RPM-resume of the device. Fixes: 5937c3ce2122 ("PM: domains: Drop/restore performance state votes for devices at runtime PM") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | | | virtio-mem: fix sleeping in RCU read side section in virtio_mem_online_page_cb()David Hildenbrand2021-08-271-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virtio_mem_set_fake_offline() might sleep now, and we call it under rcu_read_lock(). To fix it, simply move the rcu_read_unlock() further up, as we're done with the device. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: 6cc26d77613a: "virtio-mem: use page_offline_(start|end) when setting PageOffline() Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | Merge tag 'mmc-v5.14-rc7' of ↵Linus Torvalds2021-08-271-2/+1
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC host fix from Ulf Hansson: - sdhci-iproc: Fix clock error for ACPI rpi's * tag 'mmc-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"
| * | | | | | | Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"Ulf Hansson2021-08-271-2/+1
| |/ / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571. It turned out that the change from the reverted commit breaks the ACPI based rpi's because it causes the 100Mhz max clock to be overridden to the return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a OF/DT based clock device. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* | | | | | | Merge tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2021-08-278-46/+63
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "Last set of fixes for 5.14, nothing major a couple of i915, couple of imx and a few amdgpu. All pretty small. i915: - Fix syncmap memory leak - Drop redundant display port debug print amdgpu: - Fix for pinning display buffers multiple times - Fix delayed work handling for GFXOFF - Fix build when CONFIG_SUSPEND is not set imx: - fix planar offset calculations - fix accidental partial revert" * tag 'drm-fixes-2021-08-27' of git://anongit.freedesktop.org/drm/drm: drm/i915/dp: Drop redundant debug print drm/i915: Fix syncmap memory leak drm/amdgpu: Fix build with missing pm_suspend_target_state module export drm/amdgpu: Cancel delayed work when GFXOFF is disabled drm/amdgpu: use the preferred pin domain after the check drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fix gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats
| * \ \ \ \ \ \ Merge tag 'imx-drm-fixes-2021-08-18' of git://git.pengutronix.de/pza/linux ↵Dave Airlie2021-08-272-16/+16
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes drm/imx: imx-drm alignment and plane offset fixes Fix an accidental partial revert of commit 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix") and plane offset calculations for capture of non-aligned resolutions. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/85a41af99beb2c9e7d6020435a135bf9f205a5ff.camel@pengutronix.de
| | * | | | | | | drm/imx: ipuv3-plane: fix accidental partial revert of 8 pixel alignment fixPhilipp Zabel2021-08-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes an accidental partial revert of commit 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix") during a rebase of commit fc1e985b67f9 ("drm/imx: ipuv3-plane: add color encoding and range properties"). Fixes: fc1e985b67f9 ("drm/imx: ipuv3-plane: add color encoding and range properties") Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Link: https://lore.kernel.org/r/20210816131728.30987-1-p.zabel@pengutronix.de Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-20 00:12:17 +0100