| Commit message (Collapse) | Author | Files | Lines |
|---|
|
kdb_restore_flags() and kdb_save_flags() were added in 2010 by
commit 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)")
but have remained unused.
Remove them, and their associated storage.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250112012049.319515-1-linux@treblig.org
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
|
|
Use kmap_local_page() instead of kmap_atomic() which has been deprecated.
Signed-off-by: Zhang Heng <zhangheng@kylinos.cn>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20241223085420.1815930-1-zhangheng@kylinos.cn
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
|
|
"resource->end" needs to always be equal to "resource->start + size - 1".
The previous version of the function did not perform the "- 1" in case
of an empty resource.
Also make sure to allow an empty resource at address 0.
Reported-by: Basharath Hussain Khaja <basharath@couthit.com>
Closes: https://lore.kernel.org/lkml/20250108140414.13530-1-basharath@couthit.com/
Fixes: 1a52a094c2f0 ("of: address: Unify resource bounds overflow checking")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250120-of-address-overflow-v1-1-dd68dbf47bce@linutronix.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
There are cases when the bootloader provides information to the kernel
in both ACPI and DTB, not interchangeably. One such use case is virtual
machines in Android. When running on x86, the Android Virtualization
Framework (AVF) boots VMs with ACPI like it is usually done on x86 (i.e.
the virtual LAPIC, IOAPIC, HPET, PCI MMCONFIG etc are described in ACPI)
but also passes various AVF-specific boot parameters in DTB. This allows
reusing the same implementations of various AVF components on both
arm64 and x86.
Commit 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware")
removed the possibility to do that, since among other things
it introduced forcing emptying the bootloader-provided DTB if ACPI is
enabled (probably assuming that if ACPI is available, a DTB can only be
useful for applying overlays to it afterwards, for testing purposes).
So restore this possibility. Instead of completely preventing using ACPI
and DT together, rely on arch-specific setup code to prevent using both
to set up the same things (see various acpi_disabled checks under arch/).
Fixes: 7b937cc243e5 ("of: Create of_root if no dtb provided by firmware")
Signed-off-by: Dmytro Maluka <dmaluka@chromium.org>
Link: https://lore.kernel.org/r/20250105172741.3476758-3-dmaluka@chromium.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Some libraries want to ensure they are single threaded before forking,
so making the kernel's kvm huge page recovery process a vhost task of
the user process breaks those. The minijail library used by crosvm is
one such affected application.
Defer the task to after the first VM_RUN call, which occurs after the
parent process has forked all its jailed processes. This needs to happen
only once for the kvm instance, so introduce some general-purpose
infrastructure for that, too. It's similar in concept to pthread_once;
except it is actually usable, because the callback takes a parameter.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250123153543.2769928-1-kbusch@meta.com>
[Move call_once API to include/linux. - Paolo]
Cc: stable@vger.kernel.org
Fixes: d96c77bd4eeb ("KVM: x86: switch hugepage recovery thread to vhost_task")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are some patches with long lines as a result of checkpatch
enforcing 100, not 80, but checkpatch is only a tool not a coding style.
The Linux Kernel Coding Style is still clear here on preferred limit.
Mentioned preferred style of wrapping long lines in DTS, based on Linux
Kernel Coding Style.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250118102247.18257-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.
No functional changes here, but saves some comments during reviews of
new patches built on existing code.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # renesas
Link: https://lore.kernel.org/r/20250107131019.246517-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Toggling memory enable is free on bare metal, but potentially expensive
in virtualized environments as the device MMIO spaces are added and
removed from the VM address space, including DMA mapping of those spaces
through the IOMMU where peer-to-peer is supported. Currently memory
decode is disabled around sizing each individual BAR, even for SR-IOV
BARs while VF Enable is cleared.
This can be better optimized for virtual environments by sizing a set
of BARs at once, stashing the resulting mask into an array, while only
toggling memory enable once. This also naturally improves the SR-IOV
path as the caller becomes responsible for any necessary decode disables
while sizing BARs, therefore SR-IOV BARs are sized relying only on the
VF Enable rather than toggling the PF memory enable in the command
register.
Link: https://lore.kernel.org/r/20250120182202.1878581-1-alex.williamson@redhat.com
Reported-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Link: https://lore.kernel.org/r/CAHTA-uYp07FgM6T1OZQKqAdSA5JrZo0ReNEyZgQZub4mDRrV5w@mail.gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Mitchell Augustin <mitchell.augustin@canonical.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
efi_memattr_init() added a sanity check to avoid firmware caused corruption.
The check is based on efi memmap entry numbers, but kexec only takes the
runtime related memmap entries thus this caused many false warnings, see
below thread for details:
https://lore.kernel.org/all/20250108215957.3437660-2-usamaarif642@gmail.com/
Ard suggests to skip the efi memattr table in kexec, this makes sense because
those memattr fixups are not critical.
Fixes: 8fbe4c49c0cc ("efi/memattr: Ignore table if the size is clearly bogus")
Cc: <stable@vger.kernel.org> # v6.13+
Reported-by: Breno Leitao <leitao@debian.org>
Reported-and-tested-by: Usama Arif <usamaarif642@gmail.com>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The following failure was reported on HPE ProLiant D320:
[ 10.693310][ T1] tpm_tis STM0925:00: 2.0 TPM (device-id 0x3, rev-id 0)
[ 10.848132][ T1] ------------[ cut here ]------------
[ 10.853559][ T1] WARNING: CPU: 59 PID: 1 at mm/page_alloc.c:4727 __alloc_pages_noprof+0x2ca/0x330
[ 10.862827][ T1] Modules linked in:
[ 10.866671][ T1] CPU: 59 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.0-lp155.2.g52785e2-default #1 openSUSE Tumbleweed (unreleased) 588cd98293a7c9eba9013378d807364c088c9375
[ 10.882741][ T1] Hardware name: HPE ProLiant DL320 Gen12/ProLiant DL320 Gen12, BIOS 1.20 10/28/2024
[ 10.892170][ T1] RIP: 0010:__alloc_pages_noprof+0x2ca/0x330
[ 10.898103][ T1] Code: 24 08 e9 4a fe ff ff e8 34 36 fa ff e9 88 fe ff ff 83 fe 0a 0f 86 b3 fd ff ff 80 3d 01 e7 ce 01 00 75 09 c6 05 f8 e6 ce 01 01 <0f> 0b 45 31 ff e9 e5 fe ff ff f7 c2 00 00 08 00 75 42 89 d9 80 e1
[ 10.917750][ T1] RSP: 0000:ffffb7cf40077980 EFLAGS: 00010246
[ 10.923777][ T1] RAX: 0000000000000000 RBX: 0000000000040cc0 RCX: 0000000000000000
[ 10.931727][ T1] RDX: 0000000000000000 RSI: 000000000000000c RDI: 0000000000040cc0
The above transcript shows that ACPI pointed a 16 MiB buffer for the log
events because RSI maps to the 'order' parameter of __alloc_pages_noprof().
Address the bug by moving from devm_kmalloc() to devm_add_action() and
kvmalloc() and devm_add_action().
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Cc: stable@vger.kernel.org # v2.6.16+
Fixes: 55a82ab3181b ("[PATCH] tpm: add bios measurement log")
Reported-by: Andy Liang <andy.liang@hpe.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219495
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Andy Liang <andy.liang@hpe.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
If the server doesn't support both EAs and reparse point in a file,
the SMB2_QUERY_INFO request will fail with either
STATUS_NO_EAS_ON_FILE or STATUS_EAS_NOT_SUPPORT in the compound chain,
so ignore it as long as reparse point isn't
IO_REPARSE_TAG_LX_(CHR|BLK), which would require the EAs to know about
major/minor numbers.
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The matching of DFS connections is already handled by @dfs_conn, so
remove @leaf_fullpath matching altogether.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
TCP_Server_Info::leaf_fullpath is allocated in cifs_get_tcp_session()
and never changed afterwards, so there is no need to serialize its
access.
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
raw_spin_locks can be traced by lockdep or tracing itself. Atomic64
operations can be used in the tracing infrastructure. When an architecture
does not have true atomic64 operations it can use the generic version that
disables interrupts and uses spin_locks.
The tracing ring buffer code uses atomic64 operations for the time
keeping. But because some architectures use the default operations, the
locking inside the atomic operations can cause an infinite recursion.
As atomic64 implementation is architecture specific, it should not be
using raw_spin_locks() but instead arch_spin_locks as that is the purpose
of arch_spin_locks. To be used in architecture specific implementations of
generic infrastructure like atomic64 operations.
Note, by switching from raw_spin_locks to arch_spin_locks, the locks taken
to emulate the atomic64 operations will not have lockdep, mmio, or any
kind of checks done on them. They will not even disable preemption,
although the code will disable interrupts preventing the tasks that hold
the locks from being preempted. As the locks held are done so for very
short periods of time, and the logic is only done to emulate atomic64, not
having them be instrumented should not be an issue.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/20250122144311.64392baf@gandalf.local.home
Fixes: c84897c0ff592 ("ring-buffer: Remove 32bit timestamp logic")
Closes: https://lore.kernel.org/all/86fb4f86-a0e4-45a2-a2df-3154acc4f086@gaisler.com/
Reported-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Hibernation allows other OSs to boot and thus the variable state might
be altered by the time the hibernation image is resumed. Resync the
variable state by looping over all the dentries and update the size
(in case of alteration) delete any which no-longer exist. Finally,
loop over all efi variables creating any which don't have
corresponding dentries.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
[ardb: - apply error pointer fixup from Dan Carpenter
- rebase onto latest version of James's efivarfs rework]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Reuse later for variable creation after hibernation
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
GCC 15 changed the default C standard version to C23, which should not
have impacted the kernel because it requests the gnu11 standard via
'-std=' in the main Makefile. However, the EFI libstub Makefile uses its
own set of KBUILD_CFLAGS for x86 without a '-std=' value (i.e., using
the default), resulting in errors from the kernel's definitions of bool,
true, and false in stddef.h, which are reserved keywords under C23.
./include/linux/stddef.h:11:9: error: expected identifier before ‘false’
11 | false = 0,
./include/linux/types.h:35:33: error: two or more data types in declaration specifiers
35 | typedef _Bool bool;
Set '-std=gnu11' in the x86 cflags to resolve the error and consistently
use the same C standard version for the entire kernel. All other
architectures reuse KBUILD_CFLAGS from the rest of the kernel, so this
issue is not visible for them.
Cc: stable@vger.kernel.org
Reported-by: Kostadin Shishmanov <kostadinshishmanov@protonmail.com>
Closes: https://lore.kernel.org/4OAhbllK7x4QJGpZjkYjtBYNLd_2whHx9oFiuZcGwtVR4hIzvduultkgfAIRZI3vQpZylu7Gl929HaYFRGeMEalWCpeMzCIIhLxxRhq4U-Y=@protonmail.com/
Reported-by: Jakub Jelinek <jakub@redhat.com>
Closes: https://lore.kernel.org/Z4467umXR2PZ0M1H@tucnak/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The error handling in tas2781_hda_spi_probe() has quite a few
problems, as reported by Dan Carpenter. The code jumps to err label
and calls tas2781_hda_remove(), but this call would rather crash.
In some places, no error code is set properly, and the runtime PM
setup is doubly done.
This patch tries to address those bogus error handling. Basically we
can return immediately at each error before adding the component.
Also, the error code should be set properly for the unmatched SPI
device name. And finally, component_add() should be added before
enabling the runtime PM.
Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/ae5fcd48-58ac-49a8-a434-5f779bad0fb7@stanley.mountain
Link: https://patch.msgid.link/20250122084756.23876-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Propagate the error code from devm_gpiod_get_index_optional(). The
current code returns success.
Fixes: bb5f86ea50ff ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/6103e81a-13bf-4eab-89af-f6830c14e14c@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The scnprintf() function never returns negatives. And it won't return
zero here either, plus if it did we'd need to fix the error code.
Delete this dead code.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/d57ded9e-9969-4922-8347-67b758499483@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the 'cachestat()' system call was added in commit cf264e1329fb
("cachestat: implement cachestat syscall"), it was meant to be a much
more convenient (and performant) version of mincore() that didn't need
mapping things into the user virtual address space in order to work.
But it ended up missing the "check for writability or ownership" fix for
mincore(), done in commit 134fca9063ad ("mm/mincore.c: make mincore()
more conservative").
This just adds equivalent logic to 'cachestat()', modified for the file
context (rather than vma).
Reported-by: Sudheendra Raghav Neela <sneela@tugraz.at>
Fixes: cf264e1329fb ("cachestat: implement cachestat syscall")
Tested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function graph infrastructure is now generic so that kretprobes,
fprobes and BPF can use it. But there is still some leftover logic that
only the function graph tracer itself uses. This is the calculation of the
calltime and return time of the functions. The calculation of the calltime
has been moved into the function graph tracer and those users that need it
so that it doesn't cause overhead to the other users. But the return
function timestamp was still called.
Instead of just moving the taking of the timestamp into the function graph
trace remove the calltime and rettime completely from the ftrace_graph_ret
structure. Instead, move it into the function graph return entry event
structure and this also moves all the calltime and rettime logic out of
the generic fgraph.c code and into the tracing code that uses it.
This has been reported to decrease the overhead by ~27%.
Link: https://lore.kernel.org/all/Z3aSuql3fnXMVMoM@krava/
Link: https://lore.kernel.org/all/173665959558.1629214.16724136597211810729.stgit@devnote2/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250121194436.15bdf71a@gandalf.local.home
Reported-by: Jiri Olsa <olsajiri@gmail.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
PolarFire SoC may be configured in a way that requires non-coherent DMA
handling. On RISC-V, buses are coherent by default & the dma-noncoherent
property is required to denote buses or devices that are non-coherent.
Link: https://lore.kernel.org/r/20241011140043.1250030-4-daire.mcnamara@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rob Herring <robh@kernel.org>
|
|
mode
On Microchip PolarFire SoC the PCIe Root Port can be behind one of three
general purpose Fabric Interface Controller (FIC) buses that encapsulates
an AXI-S bus. Depending on which FIC(s) the Root Port is connected through
to CPU space, and what address translation is done by that FIC, the Root
Port driver's inbound address translation may vary.
For all current supported designs and all future expected designs, inbound
address translation done by a FIC on PolarFire SoC varies depending on
whether PolarFire SoC is operating in coherent DMA mode or noncoherent DMA
mode.
The setup of the outbound address translation tables in the Root Port
driver only needs to handle these two cases.
Setup the inbound address translation tables to one of two address
translations, depending on whether the Root Port is being used with
coherent DMA or noncoherent DMA.
Link: https://lore.kernel.org/r/20241011140043.1250030-3-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f941 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
[bhelgaas: adapt for ac7f53b7e728 ("PCI: microchip: Add support for using
either Root Port 1 or 2")]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The documentation currently says:
config_acs=
Format:
<ACS flags>@<pci_dev>[; ...]
Specify one or more PCI devices (in the format
specified above) optionally prepended with flags
and separated by semicolons. The respective
capabilities will be enabled, disabled or
unchanged based on what is specified in
flags.
(...)
For example,
pci=config_acs=10x
would configure all devices that support
ACS to enable P2P Request Redirect, disable
Translation Blocking, and leave Source
Validation unchanged from whatever power-up
or firmware set it to.
See the complete documentation at:
https://www.kernel.org/doc/html/latest/admin-guide/kernel-parameters.html
However, a flag specification always needs to be suffixed with "@" and
a PCI valid device address, which is missing in this example. Also, to
configure all devices that support ACS, the flag needs to be suffixed
with "@pci:0:0", for the ACS support to be enabled.
Fix the documentation so the example is correct.
Link: https://lore.kernel.org/r/20240915-acs-v1-1-b9ee536ee9bd@daynix.com
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Remove duplicate macro PCI_VSEC_HDR and its related macro
PCI_VSEC_HDR_LEN_SHIFT from pci_regs.h to avoid redundancy and
inconsistencies. Update VFIO PCI code to use PCI_VNDR_HEADER and
PCI_VNDR_HEADER_LEN() for consistent naming and functionality.
These changes aim to streamline header handling while minimizing impact,
given the niche usage of these macros in userspace.
Link: https://lore.kernel.org/r/20241216013536.4487-1-zhangdongdong@eswincomputing.com
Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The header clearly states that it does not want to be included directly,
only via 'device.h'. The 'platform_device.h' works equally well.
Thus, remove the direct inclusion.
Link: https://lore.kernel.org/r/20241118072917.3853-12-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
The following works fine:
~# echo ':mod:trace_events_sample' > /sys/kernel/tracing/set_event
~# cat /sys/kernel/tracing/set_event
*:*:mod:trace_events_sample
~#
But if a name is given without a ':' where it can match an event name or
system name, the output of the cached events does not include a new line:
~# echo 'foo_bar:mod:trace_events_sample' > /sys/kernel/tracing/set_event
~# cat /sys/kernel/tracing/set_event
foo_bar:mod:trace_events_sample~#
Add the '\n' to that as well.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250121151336.6c491844@gandalf.local.home
Fixes: b355247df104e ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The adding of cached events for modules not loaded yet required a
descriptor to separate the iteration of events with the iteration of
cached events for a module. But the allocation used the size of the
pointer and not the size of the contents to allocate its data and caused a
slab-out-of-bounds.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20250121151236.47fcf433@gandalf.local.home
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/Z4_OHKESRSiJcr-b@lappy/
Fixes: b355247df104e ("tracing: Cache ":mod:" events for modules not loaded yet")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Some architectures can not safely do atomic64 operations in NMI context.
Since the ring buffer relies on atomic64 operations to do its time
keeping, if an event is requested in NMI context, reject it for these
architectures.
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/20250120235721.407068250@goodmis.org
Fixes: c84897c0ff592 ("ring-buffer: Remove 32bit timestamp logic")
Closes: https://lore.kernel.org/all/86fb4f86-a0e4-45a2-a2df-3154acc4f086@gaisler.com/
Reported-by: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Migrate the PCI endpoint test to Kselftest framework. All the tests that
were part of the previous pcitest.sh file were migrated.
Below is the list of tests converted:
1. BAR0 Test
2. BAR1 Test
3. BAR2 Test
4. BAR3 Test
5. BAR4 Test
6. BAR5 Test
7. Consecutive BAR Tests
8. Legacy IRQ Tests
9. MSI Interrupt Tests (MSI1 to MSI32)
10. MSI-X Interrupt Tests (MSI-X1 to MSI-X2048)
11. Read Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
12. Write Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
13. Copy Tests - MEMCPY (For 1, 1024, 1025, 1024000, 1024001 Bytes)
14. Read Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
15. Write Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
16. Copy Tests - DMA (For 1, 1024, 1025, 1024000, 1024001 Bytes)
BAR, DMA and MEMCPY tests are added as fixture variants and can be executed
separately as below:
$ pci_endpoint_test -v BAR0
$ pci_endpoint_test -v dma
$ pci_endpoint_test -v memcpy
Link: https://lore.kernel.org/r/20250116171650.33585-5-manivannan.sadhasivam@linaro.org
Co-developed-by: Aman Gupta <aman1.gupta@samsung.com>
Co-developed-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
[mani: reworked based on the IOCTL fix, cleanups, documentation, commit message]
Signed-off-by: Aman Gupta <aman1.gupta@samsung.com>
Signed-off-by: Padmanabhan Rajanbabu <p.rajanbabu@samsung.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
This just moves the existing tests under tools/pci to
tools/testing/selftests/pci_endpoint and adjusts the paths in Makefile
accordingly. Migration to Kselftest framework will be done in subsequent
commits.
Link: https://lore.kernel.org/r/20250116171650.33585-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
IOCTLs are supposed to return 0 for success and negative error codes for
failure. Currently, this driver is returning 0 for failure and 1 for
success, that's not correct. Hence, fix it!
Link: https://lore.kernel.org/r/20250116171650.33585-3-manivannan.sadhasivam@linaro.org
Fixes: 2c156ac71c6b ("misc: Add host side PCI driver for PCI test function device")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/r/YvzNg5ROnxEApDgS@kroah.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Prevent double queueing of implicit ODP mr destroy work by using
__xa_cmpxchg() to make sure this is the only time we are destroying this
specific mr.
Without this change, we could try to invalidate this mr twice, which in
turn could result in queuing a MR work destroy twice, and eventually the
second work could execute after the MR was freed due to the first work,
causing a user after free and trace below.
refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 12178 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x130
Modules linked in: bonding ib_ipoib vfio_pci ip_gre geneve nf_tables ip6_gre gre ip6_tunnel tunnel6 ipip tunnel4 ib_umad rdma_ucm mlx5_vfio_pci vfio_pci_core vfio_iommu_type1 mlx5_ib vfio ib_uverbs mlx5_core iptable_raw openvswitch nsh rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay zram zsmalloc fuse [last unloaded: ib_uverbs]
CPU: 2 PID: 12178 Comm: kworker/u20:5 Not tainted 6.5.0-rc1_net_next_mlx5_58c644e #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound free_implicit_child_mr_work [mlx5_ib]
RIP: 0010:refcount_warn_saturate+0x12b/0x130
Code: 48 c7 c7 38 95 2a 82 c6 05 bc c6 fe 00 01 e8 0c 66 aa ff 0f 0b 5b c3 48 c7 c7 e0 94 2a 82 c6 05 a7 c6 fe 00 01 e8 f5 65 aa ff <0f> 0b 5b c3 90 8b 07 3d 00 00 00 c0 74 12 83 f8 01 74 13 8d 50 ff
RSP: 0018:ffff8881008e3e40 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000027
RDX: ffff88852c91b5c8 RSI: 0000000000000001 RDI: ffff88852c91b5c0
RBP: ffff8881dacd4e00 R08: 00000000ffffffff R09: 0000000000000019
R10: 000000000000072e R11: 0000000063666572 R12: ffff88812bfd9e00
R13: ffff8881c792d200 R14: ffff88810011c005 R15: ffff8881002099c0
FS: 0000000000000000(0000) GS:ffff88852c900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f5694b5e000 CR3: 00000001153f6003 CR4: 0000000000370ea0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? refcount_warn_saturate+0x12b/0x130
free_implicit_child_mr_work+0x180/0x1b0 [mlx5_ib]
process_one_work+0x1cc/0x3c0
worker_thread+0x218/0x3c0
kthread+0xc6/0xf0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 5256edcb98a1 ("RDMA/mlx5: Rework implicit ODP destroy")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/r/c96b8645a81085abff739e6b06e286a350d1283d.1737274283.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This patch addresses a race condition for an ODP MR that can result in a
CQE with an error on the UMR QP.
During the __mlx5_ib_dereg_mr() flow, the following sequence of calls
occurs:
mlx5_revoke_mr()
mlx5r_umr_revoke_mr()
mlx5r_umr_post_send_wait()
At this point, the lkey is freed from the hardware's perspective.
However, concurrently, mlx5_ib_invalidate_range() might be triggered by
another task attempting to invalidate a range for the same freed lkey.
This task will:
- Acquire the umem_odp->umem_mutex lock.
- Call mlx5r_umr_update_xlt() on the UMR QP.
- Since the lkey has already been freed, this can lead to a CQE error,
causing the UMR QP to enter an error state [1].
To resolve this race condition, the umem_odp->umem_mutex lock is now also
acquired as part of the mlx5_revoke_mr() scope. Upon successful revoke,
we set umem_odp->private which points to that MR to NULL, preventing any
further invalidation attempts on its lkey.
[1] From dmesg:
infiniband rocep8s0f0: dump_cqe:277:(pid 0): WC error: 6, Message: memory bind operation error
cqe_dump: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cqe_dump: 00000030: 00 00 00 00 08 00 78 06 25 00 11 b9 00 0e dd d2
WARNING: CPU: 15 PID: 1506 at drivers/infiniband/hw/mlx5/umr.c:394 mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
Modules linked in: ip6table_mangle ip6table_natip6table_filter ip6_tables iptable_mangle xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_umad ib_ipoib ib_cm mlx5_ib ib_uverbs ib_core fuse mlx5_core
CPU: 15 UID: 0 PID: 1506 Comm: ibv_rc_pingpong Not tainted 6.12.0-rc7+ #1626
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5r_umr_post_send_wait+0x15a/0x2b0 [mlx5_ib]
[..]
Call Trace:
<TASK>
mlx5r_umr_update_xlt+0x23c/0x3e0 [mlx5_ib]
mlx5_ib_invalidate_range+0x2e1/0x330 [mlx5_ib]
__mmu_notifier_invalidate_range_start+0x1e1/0x240
zap_page_range_single+0xf1/0x1a0
madvise_vma_behavior+0x677/0x6e0
do_madvise+0x1a2/0x4b0
__x64_sys_madvise+0x25/0x30
do_syscall_64+0x6b/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: e6fb246ccafb ("RDMA/mlx5: Consolidate MR destruction to mlx5_ib_dereg_mr()")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/r/68a1e007c25b2b8fe5d625f238cc3b63e5341f77.1737290229.git.leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Artemy Kovalyov <artemyko@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The iommu_hwpt_pgfault is used to report IO page fault data to userspace,
but iommufd_fault_fops_read was never zeroing its padding. This leaks the
content of the kernel stack memory to userspace.
Also, the iommufd uAPI requires explicit padding and use of __aligned_u64
to ensure ABI compatibility's with 32 bit.
pahole result, before:
struct iommu_hwpt_pgfault {
__u32 flags; /* 0 4 */
__u32 dev_id; /* 4 4 */
__u32 pasid; /* 8 4 */
__u32 grpid; /* 12 4 */
__u32 perm; /* 16 4 */
/* XXX 4 bytes hole, try to pack */
__u64 addr; /* 24 8 */
__u32 length; /* 32 4 */
__u32 cookie; /* 36 4 */
/* size: 40, cachelines: 1, members: 8 */
/* sum members: 36, holes: 1, sum holes: 4 */
/* last cacheline: 40 bytes */
};
pahole result, after:
struct iommu_hwpt_pgfault {
__u32 flags; /* 0 4 */
__u32 dev_id; /* 4 4 */
__u32 pasid; /* 8 4 */
__u32 grpid; /* 12 4 */
__u32 perm; /* 16 4 */
__u32 __reserved; /* 20 4 */
__u64 addr __attribute__((__aligned__(8))); /* 24 8 */
__u32 length; /* 32 4 */
__u32 cookie; /* 36 4 */
/* size: 40, cachelines: 1, members: 9 */
/* forced alignments: 1 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
Fixes: c714f15860fc ("iommufd: Add fault and response message definitions")
Link: https://patch.msgid.link/r/20250120195051.2450-1-nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Document the PCIe controller on the IPQ5424 platform using the
IPQ9574 bindings as a fallback, since the PCIe on the IPQ5424
is similar to IPQ9574.
Link: https://lore.kernel.org/r/20241213134950.234946-2-quic_mmanikan@quicinc.com
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Qcom PCIe RC controllers are capable of generating 'global' SPI interrupt
to the host CPU. This interrupt can be used by the device driver to handle
PCIe link specific events such as Link up and Link down, which give the
driver a chance to start bus enumeration on its own when link is up and
initiate link training if link goes to a bad state. The PCIe driver can
still work without this interrupt but it will provide a nice user
experience when device gets plugged and removed.
Document the interrupt as optional for SM8550 and SM8650 platforms.
Link: https://lore.kernel.org/r/20241126-topic-sm8x50-pcie-global-irq-v1-1-4049cfccd073@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Convert device tree binding document mobiveil-pcie.txt to YAML format
and merge layerscape-pcie-gen4.txt into this file.
Additional changes:
- interrupt-names: "aer", "pme", "intr", which align order in examples.
- reg-names: reorder as csr_axi_slave, config_axi_slave to match
layerscape-pcie-gen4 and existing Layerscape DTS users.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']
Link: https://lore.kernel.org/r/20241211171318.4129818-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: fix typos, whitespace, consistent bus-range usage]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Fix a sparse warning due to the invalid return type from poll ops,
which is __poll_t.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Link: https://patch.msgid.link/20250121170032.7236-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix a wrong conversion macro used for resp->opcode, which is __le32.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501212331.SaePSmsA-lkp@intel.com/
Link: https://patch.msgid.link/20250121170032.7236-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The cached level meter values are returned from the USB core as
__le32, hence declare properly.
Fixes: 46757a3e7d50 ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202501212331.SaePSmsA-lkp@intel.com/
Link: https://patch.msgid.link/20250121170032.7236-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add Microchip parts to the Device ID table so the driver supports PCI100x
devices.
Add a new macro to quirk the Microchip Switchtec PCI100x parts to allow DMA
access via NTB to work when the IOMMU is turned on.
PCI100x family has 6 variants; each variant is designed for different
application usages, different port counts and lane counts:
PCI1001 has 1 x4 upstream port and 3 x4 downstream ports
PCI1002 has 1 x4 upstream port and 4 x2 downstream ports
PCI1003 has 2 x4 upstream ports, 2 x2 upstream ports, and 2 x2
downstream ports
PCI1004 has 4 x4 upstream ports
PCI1005 has 1 x4 upstream port and 6 x2 downstream ports
PCI1006 has 6 x2 upstream ports and 2 x2 downstream ports
[Historical note: these parts use PCI_VENDOR_ID_EFAR (0x1055), from EFAR
Microsystems, which was acquired in 1996 by Standard Microsystems Corp,
which was acquired by Microchip Technology in 2012. The PCI-SIG confirms
that Vendor ID 0x1055 is assigned to Microchip even though it's not
visible via https://pcisig.com/membership/member-companies]
Link: https://lore.kernel.org/r/20250120095524.243103-1-Saladi.Rakeshbabu@microchip.com
Signed-off-by: Rakesh Babu Saladi <Saladi.Rakeshbabu@microchip.com>
[bhelgaas: Vendor ID history]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-By: Logan Gunthorpe <logang@deltatee.com>
|
|
A BAR size is always a power of two. buf_size = min(SZ_1M, bar_size).
If the BAR size is <= 1MB, there will be one iteration, no remainder.
If the BAR size is > 1MB, there will be more than one iteration, but the
size will always be evenly divisible by 1MB, so no remainder.
Link: https://lore.kernel.org/r/20250109094556.1724663-2-18255117159@163.com
Suggested-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Add a more advanced BAR test that writes all BARs in one go, and then reads
them back and verifies that the value matches the BAR number bitwise OR'ed
with offset, this allows us to verify:
- The BAR number was what we intended to read
- The offset was what we intended to read
This allows us to detect potential address translation issues on the EP.
Reading back the BAR directly after writing will not allow us to detect the
case where inbound address translation on the endpoint incorrectly causes
multiple BARs to be redirected to the same memory region (within the EP).
Link: https://lore.kernel.org/r/20241116032045.2574168-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The test BAR is on the EP side is allocated using pci_epf_alloc_space(),
which allocates the backing memory using dma_alloc_coherent(), which will
return zeroed memory regardless of __GFP_ZERO was set or not.
This means that running a new version of pci-endpoint-test.c (host side)
with an old version of pci-epf-test.c (EP side) will not see any
capabilities being set (as intended), so this is backwards compatible.
Additionally, the EP side always allocates at least 128 bytes for the test
BAR (excluding the MSI-X table), this means that adding another register at
offset 0x30 is still within the 128 available bytes.
For now, we only add the CAP_UNALIGNED_ACCESS capability.
If CAP_UNALIGNED_ACCESS is set, that means that the EP side supports
reading/writing to an address without any alignment requirements.
Thus, if CAP_UNALIGNED_ACCESS is set, make sure that the host side does
not add any extra padding to the buffers that we allocate (which was only
done in order to get the buffers to satisfy certain alignment requirements
by the endpoint controller).
Link: https://lore.kernel.org/r/20241203063851.695733-6-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
The test BAR is on the EP side is allocated using pci_epf_alloc_space(),
which allocates the backing memory using dma_alloc_coherent(), which will
return zeroed memory regardless of __GFP_ZERO was set or not.
This means that running a new version of pci-endpoint-test.c (host side)
with an old version of pci-epf-test.c (EP side) will not see any
capabilities being set (as intended), so this is backwards compatible.
Additionally, the EP side always allocates at least 128 bytes for the test
BAR (excluding the MSI-X table), this means that adding another register at
offset 0x30 is still within the 128 available bytes.
For now, we only add the CAP_UNALIGNED_ACCESS capability.
Set CAP_UNALIGNED_ACCESS if the EPC driver can handle any address (because
it implements the .align_addr callback).
Link: https://lore.kernel.org/r/20241203063851.695733-5-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
|
|
Currently, if DMA MEMCPY test is requested by the host, and if the endpoint
DMA controller supports DMA_PRIVATE, the test will fail. This is not
correct since there is no check for DMA_MEMCPY capability and the DMA
controller can support both DMA_PRIVATE and DMA_MEMCPY.
Fix the check and also reword the error message.
Link: https://lore.kernel.org/r/20250116171650.33585-2-manivannan.sadhasivam@linaro.org
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Reported-by: Niklas Cassel <cassel@kernel.org>
Closes: https://lore.kernel.org/linux-pci/Z3QtEihbiKIGogWA@ryzen
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
If dma_chan_tx allocation fails, set dma_chan_rx to NULL after it is
freed.
Link: https://lore.kernel.org/r/20241227160841.92382-1-khalfella@gmail.com
Fixes: 8353813c88ef ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")
Signed-off-by: Mohamed Khalfella <khalfella@gmail.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
The delete on last close functionality can now only be tested properly
by using multiple threads to hold open the variable files and testing
what happens as they complete.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
