| Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ChannelSequence field in the SMB3 header is supposed to be
increased after reconnect to allow the server to distinguish
requests from before and after the reconnect. We had always
been setting it to zero. There are cases where incrementing
ChannelSequence on requests after network reconnects can reduce
the chance of data corruptions.
See MS-SMB2 3.2.4.1 and 3.2.7.1
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: stable@vger.kernel.org # 5.16+
|
|
We read and cache directory contents when we get directory
lease, so we should ask for read permission to read contents
of directory.
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/smb2ops.c:2973:12: warning: stack frame size (1336)
exceeds limit (1024) in 'smb2_query_reparse_point'
[-Wframe-larger-than]
Fix this by allocating a structure that will hold most of the large
variables.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/smb2ops.c:2521:1: warning: stack frame size (1336)
exceeds limit (1024) in 'smb2_query_info_compound'
[-Wframe-larger-than]
Fix this by allocating a structure that will hold most of the large
variables.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/smb2ops.c:1080:1: warning: stack frame size (1432)
exceeds limit (1024) in 'smb2_set_ea' [-Wframe-larger-than]
Fix this by allocating a structure that will hold most of the large
variables.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/transport.c:420:1: warning: stack frame size (1048)
exceeds limit (1024) in 'smb_send_rqst' [-Wframe-larger-than]
Fix this by allocating a structure that will hold transform header and
compound requests.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/connect.c:1109:1: warning: stack frame size (1048)
exceeds limit (1024) in 'cifs_demultiplex_thread'
[-Wframe-larger-than]
It turns out that clean_demultiplex_info() got inlined into
cifs_demultiplex_thread(), so mark it as noinline_for_stack to save
some stack space.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Clang warns about exceeded stack frame size
fs/smb/client/sess.c:160:5: warning: stack frame size (1368) exceeds
limit (1024) in 'cifs_try_adding_channels' [-Wframe-larger-than]
It turns out that cifs_ses_add_channel() got inlined into
cifs_try_adding_channels() which had a stack-allocated variable @ctx
of 624 bytes in size. Fix this by making it heap-allocated.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307270640.5ODmPwDl-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
By doing so we can selectively mark those submounts as 'noserverino'
rather than whole mount and thus avoiding inode collisions in them.
Consider a "test" SMB share that has two mounted NTFS volumes
(vol0 & vol1) inside it.
* Before patch
$ mount.cifs //srv/test /mnt/1 -o ...,serverino
$ ls -li /mnt/1/vol0
total 1
281474976710693 drwxr-xr-x 2 root root 0 Jul 15 00:23 $RECYCLE.BIN
281474976710696 drwxr-xr-x 2 root root 0 Jul 18 18:23 System Volume...
281474976710699 -rwxr-xr-x 1 root root 0 Aug 14 21:53 f0
281474976710700 -rwxr-xr-x 1 root root 0 Aug 15 18:52 f2
281474976710698 drwxr-xr-x 2 root root 0 Aug 12 19:39 foo
281474976710692 -rwxr-xr-x 1 root root 5 Aug 4 21:18 vol0_f0.txt
$ ls -li /mnt/1/vol1
total 0
281474976710693 drwxr-xr-x 2 root root 0 Jul 15 00:23 $RECYCLE.BIN
281474976710696 drwxr-xr-x 2 root root 0 Jul 18 18:23 System Volume...
281474976710698 drwxr-xr-x 2 root root 0 Aug 12 19:39 bar
281474976710699 -rwxr-xr-x 1 root root 0 Aug 14 22:03 f0
281474976710700 -rwxr-xr-x 1 root root 0 Aug 14 22:52 f1
281474976710692 -rwxr-xr-x 1 root root 0 Jul 15 00:23 vol1_f0.txt
* After patch
$ mount.cifs //srv/test /mnt/1 -o ...,serverino
$ ls -li /mnt/1/vol0
total 1
590 drwxr-xr-x 2 root root 0 Jul 15 00:23 $RECYCLE.BIN
594 drwxr-xr-x 2 root root 0 Jul 18 18:23 System Volume Information
591 -rwxr-xr-x 1 root root 0 Aug 14 21:53 f0
592 -rwxr-xr-x 1 root root 0 Aug 15 18:52 f2
593 drwxr-xr-x 2 root root 0 Aug 12 19:39 foo
595 -rwxr-xr-x 1 root root 5 Aug 4 21:18 vol0_f0.txt
$ ls -li /mnt/1/vol1
total 0
596 drwxr-xr-x 2 root root 0 Jul 15 00:23 $RECYCLE.BIN
600 drwxr-xr-x 2 root root 0 Jul 18 18:23 System Volume Information
597 drwxr-xr-x 2 root root 0 Aug 12 19:39 bar
598 -rwxr-xr-x 1 root root 0 Aug 14 22:03 f0
599 -rwxr-xr-x 1 root root 0 Aug 14 22:52 f1
601 -rwxr-xr-x 1 root root 0 Jul 15 00:23 vol1_f0.txt
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Enable the client to query reparse points in SMB2+.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Save a roundtrip by getting the reparse point tag and buffer at once
in ->query_reparse_point() and then pass the buffer down to
->query_symlink().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Check for reparse point flag on query info calls as specified in
MS-SMB2 2.2.14.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make namespace.c being built without requiring
CONFIG_CIFS_DFS_UPCALL=y by moving set_dest_addr() to dfs.c and call
it at the beginning of dfs_mount_share() so it can chase the DFS link
starting from the correct server in @ctx->dstaddr.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Automount code will handle both DFS links and reparse mount points.
Also, get rid of BUG_ON() in cifs_release_automount_timer() while
we're at it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The automount code will handle both DFS links and reparse files that
are mount points.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
If @out_iov and @out_buftype are passed, then return compounded
responses regardless whether the request failed or not. This will be
useful for detecting reparse points on SMB2_CREATE responses as
specified in MS-SMB2 2.2.14.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Instead of passing @adjust_tz and some reparse point related fields as
parameters in ->query_path_info() and
{smb311_posix,cifs}_info_to_fattr() calls, move them to
cifs_open_info_data structure as they can be easily accessed through
@data.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With current implementation, when a nested DFS link is found during
mount(2), the client follows the referral and then try to connect to
all of its targets. If all targets failed, the client bails out
rather than retrying remaining targets from previous referral.
Fix this by stacking all referrals and targets so the client can retry
remaining targets from previous referrals in case all targets of
current referral have failed.
Thanks to samba, this can be easily tested like below
* Run the following under dfs folder in samba server
$ ln -s "msdfs:srv\\bad-share" link1
$ ln -s "msdfs:srv\\dfs\\link1,srv\\good-share" link0
* Before patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
mount error(2): No such file or directory
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)...
* After patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
# ls /mnt
bar fileshare1 sub
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add new helper which declares and initialises target list of a DFS
referral rather having to do both separately.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
|
|
Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2ae73 ("blk-mq: defer to the normal
submission path for post-flush requests").
We analysed the IO hang problem, found there are two postflush requests
waiting for each other.
The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.
The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.
Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.
While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.
[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/
Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2ae73 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.
Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.
Fixes: 2fb48d88e77f ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock")
Cc: stable@vger.kernel.org
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.me
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lock
has to be held, otherwise, all kinds of bugs(list corruption, hard lockup,
..) can be triggered from blkg_destroy_all().
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: xiaoli feng <xifeng@redhat.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230817141751.1128970-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 137380c0ec40 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.
CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0ec40 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In production we were seeing a variety of WARN_ON()'s in the extent_map
code, specifically in btrfs_drop_extent_map_range() when we have to call
add_extent_mapping() for our second split.
Consider the following extent map layout
PINNED
[0 16K) [32K, 48K)
and then we call btrfs_drop_extent_map_range for [0, 36K), with
skip_pinned == true. The initial loop will have
start = 0
end = 36K
len = 36K
we will find the [0, 16k) extent, but since we are pinned we will skip
it, which has this code
start = em_end;
if (end != (u64)-1)
len = start + len - em_end;
em_end here is 16K, so now the values are
start = 16K
len = 16K + 36K - 16K = 36K
len should instead be 20K. This is a problem when we find the next
extent at [32K, 48K), we need to split this extent to leave [36K, 48k),
however the code for the split looks like this
split->start = start + len;
split->len = em_end - (start + len);
In this case we have
em_end = 48K
split->start = 16K + 36K // this should be 16K + 20K
split->len = 48K - (16K + 36K) // this overflows as 16K + 36K is 52K
and now we have an invalid extent_map in the tree that potentially
overlaps other entries in the extent map. Even in the non-overlapping
case we will have split->start set improperly, which will cause problems
with any block related calculations.
We don't actually need len in this loop, we can simply use end as our
end point, and only adjust start up when we find a pinned extent we need
to skip.
Adjust the logic to do this, which keeps us from inserting an invalid
extent map.
We only skip_pinned in the relocation case, so this is relatively rare,
except in the case where you are running relocation a lot, which can
happen with auto relocation on.
Fixes: 55ef68990029 ("Btrfs: Fix btrfs_drop_extent_cache for skip pinned case")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Specify how is SRSO mitigated when SMT is disabled. Also, correct the
SMT check for that.
Fixes: e9fbc47b818b ("x86/srso: Disable the mitigation on unaffected configurations")
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230814200813.p5czl47zssuej7nv@treble
|
|
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
void gem_close(int handle);
void* trigger(void* ptr)
{
int ret;
arg.width = arg.height = 0x20;
arg.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg);
if(ret)
{
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
gem_close(arg.handle);
while(1) {
struct drm_mode_create_dumb args = {0};
args.width = args.height = 0x20;
args.bpp = 32;
ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args);
if (ret) {
perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed");
exit(-1);
}
printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle);
gem_close(args.handle);
}
return NULL;
}
void gem_close(int handle)
{
struct drm_gem_close args;
args.handle = handle;
int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle
if (!ret)
printf("gem close handle %d\n", args.handle);
}
int main(void)
{
dri_fd= open("/dev/dri/card0", O_RDWR);
printf("fd:%d\n", dri_fd);
if(dri_fd == -1)
return -1;
pthread_t tid1;
if(pthread_create(&tid1,NULL,trigger,NULL)){
perror("[*] thread_create tid1\n");
return -1;
}
while (1)
{
gem_close(arg.handle);
}
return 0;
}
This is a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515
CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
Call Trace:
<TASK>
__dump_stack linux/lib/dump_stack.c:88
dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106
print_address_description linux/mm/kasan/report.c:319
print_report+0xd2/0x660 linux/mm/kasan/report.c:430
kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536
__asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383
qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
RIP: 0033:0x7ff5004ff5f7
Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48
RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7
RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003
RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a
R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe
R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000
</TASK>
Allocated by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510
____kasan_kmalloc linux/mm/kasan/common.c:374
__kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383
kasan_kmalloc linux/./include/linux/kasan.h:196
kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066
kmalloc linux/./include/linux/slab.h:580
kzalloc linux/./include/linux/slab.h:720
qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124
qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58
qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
Freed by task 515:
kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45
kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52
kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521
____kasan_slab_free linux/mm/kasan/common.c:236
____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200
__kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244
kasan_slab_free linux/./include/linux/kasan.h:162
slab_free_hook linux/mm/slub.c:1781
slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807
slab_free linux/mm/slub.c:3787
__kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800
kfree+0x78/0x120 linux/mm/slab_common.c:1019
qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49
ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381
kref_put linux/./include/linux/kref.h:65
ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393
qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42
drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974
kref_put linux/./include/linux/kref.h:65
__drm_gem_object_put linux/./include/drm/drm_gem.h:431
drm_gem_object_put linux/./include/drm/drm_gem.h:444
qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100
qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63
drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96
drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102
drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788
drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891
vfs_ioctl linux/fs/ioctl.c:51
__do_sys_ioctl linux/fs/ioctl.c:870
__se_sys_ioctl linux/fs/ioctl.c:856
__x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856
do_syscall_x64 linux/arch/x86/entry/common.c:50
do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120
The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)
The buggy address belongs to the physical page:
page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368
head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
Link: https://www.zerodayinitiative.com/
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814165119.90847-1-wander@redhat.com
|
|
ADQ and switchdev are not supported simultaneously. Enabling both at the
same time can result in nullptr dereference.
To prevent this, check if ADQ is active when changing devlink mode to
switchdev mode, and check if switchdev is active when enabling ADQ.
Fixes: fbc7b27af0f9 ("ice: enable ndo_setup_tc support for mqprio_qdisc")
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816193405.1307580-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 2950219d87b0 ("qede: Add basic network device support")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230816150711.59035-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One missing check in virtio_net_hdr_to_skb() allowed
syzbot to crash kernels again [1]
Do not allow gso_size to be set to GSO_BY_FRAGS (0xffff),
because this magic value is used by the kernel.
[1]
general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 0 PID: 5039 Comm: syz-executor401 Not tainted 6.5.0-rc5-next-20230809-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:skb_segment+0x1a52/0x3ef0 net/core/skbuff.c:4500
Code: 00 00 00 e9 ab eb ff ff e8 6b 96 5d f9 48 8b 84 24 00 01 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e ea 21 00 00 48 8b 84 24 00 01
RSP: 0018:ffffc90003d3f1c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 000000000001fffe RCX: 0000000000000000
RDX: 000000000000000e RSI: ffffffff882a3115 RDI: 0000000000000070
RBP: ffffc90003d3f378 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 5ee4a93e456187d6 R12: 000000000001ffc6
R13: dffffc0000000000 R14: 0000000000000008 R15: 000000000000ffff
FS: 00005555563f2380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020020000 CR3: 000000001626d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0x9d2/0xd50 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x5c4/0x17b0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x292/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x3a5/0xf10 net/core/dev.c:3625
__dev_queue_xmit+0x8f0/0x3d60 net/core/dev.c:4329
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c7/0x5570 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:727 [inline]
sock_sendmsg+0xd9/0x180 net/socket.c:750
____sys_sendmsg+0x6ac/0x940 net/socket.c:2496
___sys_sendmsg+0x135/0x1d0 net/socket.c:2550
__sys_sendmsg+0x117/0x1e0 net/socket.c:2579
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff27cdb34d9
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The status of global socket memory pressure is updated when:
a) __sk_mem_raise_allocated():
enter: sk_memory_allocated(sk) > sysctl_mem[1]
leave: sk_memory_allocated(sk) <= sysctl_mem[0]
b) __sk_mem_reduce_allocated():
leave: sk_under_memory_pressure(sk) &&
sk_memory_allocated(sk) < sysctl_mem[0]
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Fixes: e1aab161e013 ("socket: initial cgroup code.")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230816091226.1542-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
Fixes: 7e056e2360d9 ("sfc: obtain device mac address based on firmware handle for ef100")
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/aa7f589dd6028bd1ad49f0a85f37ab33c09b2b45.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100")
Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
Fixes: f90b529bcbe5 ("arm64/sme: Implement ZT0 ptrace support")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Link: https://lore.kernel.org/r/20230816-arm64-zt-ptrace-first-use-v2-1-00aa82847e28@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Reported-by: David Spickett <David.Spickett@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pausing and canceling balance can race to interrupt balance lead to BUG_ON
panic in btrfs_cancel_balance. The BUG_ON condition in btrfs_cancel_balance
does not take this race scenario into account.
However, the race condition has no other side effects. We can fix that.
Reproducing it with panic trace like this:
kernel BUG at fs/btrfs/volumes.c:4618!
RIP: 0010:btrfs_cancel_balance+0x5cf/0x6a0
Call Trace:
<TASK>
? do_nanosleep+0x60/0x120
? hrtimer_nanosleep+0xb7/0x1a0
? sched_core_clone_cookie+0x70/0x70
btrfs_ioctl_balance_ctl+0x55/0x70
btrfs_ioctl+0xa46/0xd20
__x64_sys_ioctl+0x7d/0xa0
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Race scenario as follows:
> mutex_unlock(&fs_info->balance_mutex);
> --------------------
> .......issue pause and cancel req in another thread
> --------------------
> ret = __btrfs_balance(fs_info);
>
> mutex_lock(&fs_info->balance_mutex);
> if (ret == -ECANCELED && atomic_read(&fs_info->balance_pause_req)) {
> btrfs_info(fs_info, "balance: paused");
> btrfs_exclop_balance(fs_info, BTRFS_EXCLOP_BALANCE_PAUSED);
> }
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: xiaoshoukui <xiaoshoukui@ruijie.com.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
bio_ctrl->len_to_oe_boundary is used to make sure we stay inside a zone
as we submit bios for writes. Every time we add a page to the bio, we
decrement those bytes from len_to_oe_boundary, and then we submit the
bio if we happen to hit zero.
Most of the time, len_to_oe_boundary gets set to U32_MAX.
submit_extent_page() adds pages into our bio, and the size of the bio
ends up limited by:
- Are we contiguous on disk?
- Does bio_add_page() allow us to stuff more in?
- is len_to_oe_boundary > 0?
The len_to_oe_boundary math starts with U32_MAX, which isn't page or
sector aligned, and subtracts from it until it hits zero. In the
non-zoned case, the last IO we submit before we hit zero is going to be
unaligned, triggering BUGs.
This is hard to trigger because bio_add_page() isn't going to make a bio
of U32_MAX size unless you give it a perfect set of pages and fully
contiguous extents on disk. We can hit it pretty reliably while making
large swapfiles during provisioning because the machine is freshly
booted, mostly idle, and the disk is freshly formatted. It's also
possible to trigger with reads when read_ahead_kb is set to 4GB.
The code has been clean up and shifted around a few times, but this flaw
has been lurking since the counter was added. I think the commit
24e6c8082208 ("btrfs: simplify main loop in submit_extent_page") ended
up exposing the bug.
The fix used here is to skip doing math on len_to_oe_boundary unless
we've changed it from the default U32_MAX value. bio_add_page() is the
real limit we want, and there's no reason to do extra math when block
layer is doing it for us.
Sample reproducer, note you'll need to change the path to the bdi and
device:
SUBVOL=/btrfs/swapvol
SWAPFILE=$SUBVOL/swapfile
SZMB=8192
mkfs.btrfs -f /dev/vdb
mount /dev/vdb /btrfs
btrfs subvol create $SUBVOL
chattr +C $SUBVOL
dd if=/dev/zero of=$SWAPFILE bs=1M count=$SZMB
sync
echo 4 > /proc/sys/vm/drop_caches
echo 4194304 > /sys/class/bdi/btrfs-2/read_ahead_kb
while true; do
echo 1 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/drop_caches
dd of=/dev/zero if=$SWAPFILE bs=4096M count=2 iflag=fullblock
done
Fixes: 24e6c8082208 ("btrfs: simplify main loop in submit_extent_page")
CC: stable@vger.kernel.org # 6.4+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fstests with POST_MKFS_CMD="btrfstune -m" (as in the mailing list)
reported a few of the test cases failing.
The failure scenario can be summarized and simplified as follows:
$ mkfs.btrfs -fq -draid1 -mraid1 /dev/sdb1 /dev/sdb2 :0
$ btrfstune -m /dev/sdb1 :0
$ wipefs -a /dev/sdb1 :0
$ mount -o degraded /dev/sdb2 /btrfs :0
$ btrfs replace start -B -f -r 1 /dev/sdb1 /btrfs :1
STDERR:
ERROR: ioctl(DEV_REPLACE_START) failed on "/btrfs": Input/output error
[11290.583502] BTRFS warning (device sdb2): tree block 22036480 mirror 2 has bad fsid, has 99835c32-49f0-4668-9e66-dc277a96b4a6 want da40350c-33ac-4872-92a8-4948ed8c04d0
[11290.586580] BTRFS error (device sdb2): unable to fix up (regular) error at logical 22020096 on dev /dev/sdb8 physical 1048576
As above, the replace is failing because we are verifying the header with
fs_devices::fsid instead of fs_devices::metadata_uuid, despite the
metadata_uuid actually being present.
To fix this, use fs_devices::metadata_uuid. We copy fsid into
fs_devices::metadata_uuid if there is no metadata_uuid, so its fine.
Fixes: a3ddbaebc7c9 ("btrfs: scrub: introduce a helper to verify one metadata block")
CC: stable@vger.kernel.org # 6.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
loongarch"
Unifying the asm-generic headers across 32-bit and 64-bit architectures
based on the compiler provided macros was a good idea and appears to work
with all user space, but it caused a regression when building old kernels
on systems that have the new headers installed in /usr/include, as this
combination trips an inconsistency in the kernel's own tools/include
headers that are a mix of userspace and kernel-internal headers.
This affects kernel builds on arm64, riscv64 and loongarch64 systems that
might end up using the "#define __BITS_PER_LONG 32" default from the old
tools headers. Backporting the commit into stable kernels would address
this, but it would still break building kernels without that backport,
and waste time for developers trying to understand the problem.
arm64 build machines are rather common, and on riscv64 this can also
happen in practice, but loongarch64 is probably new enough to not
be used much for building old kernels, so only revert the bits
for arm64 and riscv.
Link: https://lore.kernel.org/all/20230731160402.GB1823389@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 8386f58f8deda ("asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch")
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit ca62297b2085b5b3168bd891ca24862242c635a1.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b2085 ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
|
|
Christian reported spurious module load crashes after some of Song's
module memory layout patches.
Turns out that if the very last instruction on the very last page of the
module is a 'JMP __x86_return_thunk' then __static_call_fixup() will
trip a fault and die.
And while the module rework made this slightly more likely to happen,
it's always been possible.
Fixes: ee88d363d156 ("x86,static_call: Use alternative RET encoding")
Reported-by: Christian Bricart <christian@bricart.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lkml.kernel.org/r/20230816104419.GA982867@hirez.programming.kicks-ass.net
|
|
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset")
Signed-off-by: Alfred Lee <l00g33k@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the
/proc/powerpc/rtas/firmware_update interface to prepare a system
firmware update yields a BUG():
kernel BUG at mm/usercopy.c:102!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2
Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries
NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000
REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+)
MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c
CFAR: c0000000001fbd34 IRQMASK: 0
[ ... GPRs omitted ... ]
NIP usercopy_abort+0xa0/0xb0
LR usercopy_abort+0x9c/0xb0
Call Trace:
usercopy_abort+0x9c/0xb0 (unreliable)
__check_heap_object+0x1b4/0x1d0
__check_object_size+0x2d0/0x380
rtas_flash_write+0xe4/0x250
proc_reg_write+0xfc/0x160
vfs_write+0xfc/0x4e0
ksys_write+0x90/0x160
system_call_exception+0x178/0x320
system_call_common+0x160/0x2c4
The blocks of the firmware image are copied directly from user memory
to objects allocated from flash_block_cache, so flash_block_cache must
be created using kmem_cache_create_usercopy() to mark it safe for user
access.
Fixes: 6d07d1cd300f ("usercopy: Restrict non-usercopy caches to size 0")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
[mpe: Trim and indent oops]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com
|
|
For stack-validation of a frame-pointer build, objtool validates that
every CALL instruction is preceded by a frame-setup. The new SRSO
return thunks violate this with their RSB stuffing trickery.
Extend the __fentry__ exception to also cover the embedded_insn case
used for this. This cures:
vmlinux.o: warning: objtool: srso_untrain_ret+0xd: call without frame pointer save/setup
Fixes: 4ae68b26c3ab ("objtool/x86: Fix SRSO mess")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20230816115921.GH980931@hirez.programming.kicks-ass.net
|
|
nouveau_connector_create
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
|
|
The cited patch change mlx5_cmd_update_root_ft() to work with multiple
peer devices. However, it didn't align the error flow as well.
Hence, Fix the error code to work with multiple peer devices.
Fixes: 222dd185833e ("{net/RDMA}/mlx5: introduce lag_for_each_peer")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Fixes: 3f734b8c594b ("net/mlx5e: XDP, Use multiple single-entry objects in xdpi_fifo")
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The goal is to eventually have a proper documentation about all this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814164447.GFZNpZ/64H4lENIe94@fat_crate.local
|
|
Similar to how it doesn't make sense to have UNTRAIN_RET have two
untrain calls, it also doesn't make sense for VMEXIT to have an extra
IBPB call.
This cures VMEXIT doing potentially unret+IBPB or double IBPB.
Also, the (SEV) VMEXIT case seems to have been overlooked.
Redefine the meaning of the synthetic IBPB flags to:
- ENTRY_IBPB -- issue IBPB on entry (was: entry + VMEXIT)
- IBPB_ON_VMEXIT -- issue IBPB on VMEXIT
And have 'retbleed=ibpb' set *BOTH* feature flags to ensure it retains
the previous behaviour and issues IBPB on entry+VMEXIT.
The new 'srso=ibpb_vmexit' option only sets IBPB_ON_VMEXIT.
Create UNTRAIN_RET_VM specifically for the VMEXIT case, and have that
check IBPB_ON_VMEXIT.
All this avoids having the VMEXIT case having to check both ENTRY_IBPB
and IBPB_ON_VMEXIT and simplifies the alternatives.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.109557833@infradead.org
|
|
Since there can only be one active return_thunk, there only needs be
one (matching) untrain_ret. It fundamentally doesn't make sense to
allow multiple untrain_ret at the same time.
Fold all the 3 different untrain methods into a single (temporary)
helper stub.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230814121149.042774962@infradead.org
|
