| Commit message (Collapse) | Author | Files | Lines |
|---|
|
This reverts commit 4f531501e44: ext4: fix possible overflow in
ext4_trim_fs()
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Indicate support for referrals. Do not set any PNFS roles. Check the flags
returned by the server for validity. Do not use exchange flags from an old
client ID instance when recovering a client ID.
Update the EXCHID4_FLAG_XXX set to RFC 5661.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
We do set dentry->d_op in lookup even in case of EOENT entries.
That implies we should have dentry->d_op already set when
create/mkdir/mknod/link/symlink routines are called
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
introduced a typo somehow during a hand merge
Reported by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Remove v9fs_vfs_readlink_dotl function and use generic_readlink. Update
v9fs_vfs_follow_link_dotl function to accommodate this change
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Use proper data types for storing the count of the binary blob and
length of a string. Without this patch length calculation of string will
always result in -1 because of comparision between signed and unsigned
integer.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Source Code Reorganization
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Make the 9P_FS kconfig options subordinate to the 9P_FS kconfig symbol
in the menu presentation instead of them all being at the same level.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
If we don't have default ACL, then trying to remove
default acl on a file should return 0.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
The x86 fixmaps need to be all together... unfortunately the
VRTC one was misplaced.
This patch makes sure the MRST VRTC fixmap is put prior to the
__end_of_permanent_fixed_addresses marker.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105544.24448.27607.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We need this for x86 MID platforms where GPIO interrupts are
used. No special magic is needed so the default 1:1 behaviour
will do nicely.
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
LKML-Reference: <20110111105439.24448.69863.stgit@bob.linux.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Westmere processors use a different algorithm for
assigning APICIDs on SGI UV systems. The location of the
node number within the apicid is now a function of the
processor type.
Signed-off-by: Jack Steiner <steiner@sgi.com>
LKML-Reference: <20110110195210.GA18737@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
While both methods should work equivalently well for the native
case, the Xen Dom0 case can't reliably work with the MSR one,
since there's no guarantee that the virtual CPUs it has
available fully cover all necessary physical ones.
As per the suggestion of Robert Richter the patch only adds the
PCI method, but leaves the MSR one as a fallback to cover new
systems the PCI IDs of which may not have got added to the code
base yet.
The only change in v2 is the breaking out of the new CPI
initialization method into a separate function, as requested by
Ingo.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Cc: Andreas Herrmann3 <Andreas.Herrmann3@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <4D2B3FD7020000780002B67D@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
commit a8760ec (x86: Check tsc available/disabled in the delayed init
function) missed to prevent the setup of the delayed init function in
case the initial tsc calibration failed. This results in the same
divide by zero bug as we have seen without the tsc disabled check.
Skip the delayed work setup when tsc_khz (the initial calibration
value) is 0.
Bisected-and-tested-by: Kirill A. Shutemov <kas@openvz.org>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
In this if statement:
if (head + event->header.size >= mmap_size) {
if (mmaps[map_idx]) {
munmap(mmaps[map_idx], mmap_size);
mmaps[map_idx] = NULL;
}
page_offset = page_size * (head / page_size);
file_offset += page_offset;
head -= page_offset;
goto remap;
}
With, for instance, these values:
head=2992
event->header.size=48
mmap_size=3040
We end up endlessly looping back to remap. Off by one.
Problem introduced in 55b4462.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: David Ahern <daahern@cisco.com>
Bisected-by: David Ahern <daahern@cisco.com>
Tested-by: David Ahern <daahern@cisco.com>
Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
And a test for it:
[acme@felicio linux]$ perf test
1: vmlinux symtab matches kallsyms: Ok
2: detect open syscall event: Ok
3: detect open syscall event on all cpus: Ok
[acme@felicio linux]$
Translating C the test does:
1. generates different number of open syscalls on each CPU
by using sched_setaffinity
2. Verifies that the expected number of events is generated
on each CPU
It works as expected.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Helper functions for I2C and SMBus transactions don't modify the
i2c_client that is passed to them, so it can be marked const.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
The I2C specification explicitly describes both SDA and SCL as
bidirectional lines. An I2C master with a read-only SCL is thus not
compliant. If a slow slave stretches the clock, errors will happen,
so the bus can't be considered as reliable.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
Use a function pointer to decide whether to call i2c_add_adapter or
i2c_add_numbered_adapter. This makes the code more compact than the
current strategy of having the common code in a separate function.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
Add an i2c mux driver providing access to i2c bus segments using a
hardware MUX sitting on a master bus and controlled through gpio pins.
E.G. something like:
---------- ---------- Bus segment 1 - - - - -
| | SCL/SDA | |-------------- | |
| |------------| |
| | | | Bus segment 2 | |
| Linux | GPIO 1..N | MUX |--------------- Devices
| |------------| | | |
| | | | Bus segment M
| | | |---------------| |
---------- ---------- - - - - -
SCL/SDA of the master I2C bus is multiplexed to bus segment 1..M
according to the settings of the GPIO pins 1..N.
Signed-off-by: Peter Korsgaard <peter.korsgaard@barco.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
Commit 5a0e3ad6af8660be21ca98a971cd00f331318c05 added direct inclusion
of <linux/slab.h> to those source files that appeared to need it, but
somehow missed this. On most architectures <linux/slab.h> is still
indirectly included, but there are exceptions such as alpha.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
fix the failure handling in kobjects and the main function so that we
release the virtual keyboard if we exit due to another failure.
Signed-off-by: William Hubbs <w.d.hubbs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
In the vhci_urb_dequeue() function the TCP connection is checked twice.
Each time when the TCP connection is closed the URB is unlinked and given
back. Remove the second attempt of unlinking and giving back of the URB completely.
This patch fixes the bug described at https://bugzilla.kernel.org/show_bug.cgi?id=24872 .
Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
vm_map_ram() is not available on NOMMU platforms, and causes trouble
on incoherrent architectures such as ARM when we access the page data
through both the direct and the virtual mapping.
The alternative is to use the direct mapping to access page data
for the case when we are not crossing a page boundary, but to copy
the data into a linear scratch buffer when we are accessing data
that spans page boundaries.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: stable@kernel.org [2.6.37]
|
|
EXT2_XATTR_DEBUG
When I enable EXT2_XATTR_DEBUG in fs/ext2/xattr.c I get a build error stating
the following:
CC fs/ext2/xattr.o
fs/ext2/xattr.c: In function 'ext2_xattr_cache_insert':
fs/ext2/xattr.c:841: error: dereferencing pointer to incomplete type
fs/ext2/xattr.c:846: error: dereferencing pointer to incomplete type
make[2]: *** [fs/ext2/xattr.o] Error 1
make[1]: *** [fs/ext2] Error 2
make: *** [fs] Error 2
These lines reference ext2_xattr_cache->c_entry_count which is defined
in struct mb_cache. struct mb_cache is currently only defined in fs/mbcache.c.
Moving struct mb_cache definition to include/linux/mbcache.h to resolve the
issue.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
IS_ERR() already implies unlikely(), so it can be omitted here.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The addition of 64k block capability in the rec_len_from_disk
and rec_len_to_disk functions added a bit of math overhead which
slows down file create workloads needlessly when the architecture
cannot even support 64k blocks, thanks to page size limits.
Similar changes already exist in the ext4 codebase.
The directory entry checking can also be optimized a bit
by sprinkling in some unlikely() conditions to move the
error handling out of line.
bonnie++ sequential file creates on a 512MB ramdisk speeds up
from about 77,000/s to about 82,000/s, about a 6% improvement.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The addition of 64k block capability in the rec_len_from_disk
and rec_len_to_disk functions added a bit of math overhead which
slows down file create workloads needlessly when the architecture
cannot even support 64k blocks, thanks to page size limits.
The directory entry checking can also be optimized a bit
by sprinkling in some unlikely() conditions to move the
error handling out of line.
bonnie++ sequential file creates on a 512MB ramdisk speeds up
from about 2200/s to about 2500/s, about a 14% improvement.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Check return value of ext3_journal_get_write_acccess() and
ext3_journal_dirty_metadata().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Check return value of ext3_journal_get_write_access() and
ext3_journal_dirty_metadata().
Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fallout
Use %pV in __quota_error so a single printk can not be
interleaved with other logging messages.
Add __attribute__((format (printf, 3, 4))) so format
and arguments can be verified by compiler.
Make sure printk formats and arguments match.
Block # needed a pointer dereference.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The ioctl takes fstrim_range structure (defined in include/linux/fs.h) as an
argument specifying a range of filesystem to trim and the minimum size of an
continguous extent to trim. After the FITRIM is done, the number of bytes
passed from the filesystem down the block stack to the device for potential
discard is stored in fstrim_range.len. This number is a maximum discard amount
from the storage device's perspective, because FITRIM called repeatedly will
keep sending the same sectors for discard. fstrim_range.len will report the
same potential discard bytes each time, but only sectors which had been written
to between the discards would actually be discarded by the storage device.
Further, the kernel block layer reserves the right to adjust the discard ranges
to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc.
These reductions would not be reflected in fstrim_range.len.
Thus fstrim_range.len can give the user better insight on how much storage
space has potentially been released for wear-leveling, but it needs to be one
of only one criteria the userspace tools take into account when trying to
optimize calls to FITRIM.
Thanks to Greg Freemyer <greg.freemyer@gmail.com> for better commit message.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).
It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks are
marked as used and then trimmed. Afterwards these blocks are marked as
free in per-group bitmap.
[JK: Fixed up error handling and trimming of a single group]
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Since check_eofblocks_fl() only uses the m_lblk portion of the map
structure, we may as well pass that directly, rather than passing the
entire map, which IMHO obfuscates what parameters check_eofblocks_fl()
cares about. Not a big deal, but seems tidier and less confusing, to
me.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Commit 40389687 moved a call to ext4_forget() out of
ext4_free_branches and let ext4_free_blocks() handle calling
bforget(). But that change unfortunately did not replace the call to
ext4_forget() with brelse(), which was needed to drop the in-use count
of the indirect block's buffer head, which lead to a memory leak when
deleting files that used indirect blocks. Fix this.
Thanks to Hugh Dickins for pointing this out.
Cc: stable@kernel.org
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
This function was never implemented, except for a BUG_ON which was
tripping when ext4 is run without a journal. The problem is that
although the comment asserts that "truncate (which is the only way to
free block) discards all preallocations", ext4_free_blocks() is also
called in various error recovery paths when blocks have been
allocated, but for various reasons, we were not able to use those data
blocks (for example, because we ran out of memory while trying to
manipulate the extent tree, or some other similar situation).
In addition to the fact that this function isn't implemented except
for the incorrect BUG_ON, the single caller of this function,
ext4_free_blocks(), doesn't use it all if the journal is enabled.
So remove the (stub) function entirely for now. If we decide it's
better to add it back, it's only going to be useful with a relatively
large number of code changes anyway.
Google-Bug-Id: 3236408
Cc: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Ted first found the bug when running 2.6.36 kernel with dioread_nolock
mount option that xfstests #13 complained about wrong file size during fsck.
However, the bug exists in the older kernels as well although it is
somehow harder to trigger.
The problem is that ext4_end_io_work() can happen after we have truncated an
inode to a smaller size. Then when ext4_end_io_work() calls
ext4_convert_unwritten_extents(), we may reallocate some blocks that have
been truncated, so the inode size becomes inconsistent with the allocated
blocks.
The following patch flushes the i_completed_io_list during truncate to reduce
the risk that some pending end_io requests are executed later and convert
already truncated blocks to initialized.
Note that although the fix helps reduce the problem a lot there may still
be a race window between vmtruncate() and ext4_end_io_work(). The fundamental
problem is that if vmtruncate() is called without either i_mutex or i_alloc_sem
held, it can race with an ongoing write request so that the io_end request is
processed later when the corresponding blocks have been truncated.
Ted and I have discussed the problem offline and we saw a few ways to fix
the race completely:
a) We guarantee that i_mutex lock and i_alloc_sem write lock are both hold
whenever vmtruncate() is called. The i_mutex lock prevents any new write
requests from entering writeback and the i_alloc_sem prevents the race
from ext4_page_mkwrite(). Currently we hold both locks if vmtruncate()
is called from do_truncate(), which is probably the most common case.
However, there are places where we may call vmtruncate() without holding
either i_mutex or i_alloc_sem. I would like to ask for other people's
opinions on what locks are expected to be held before calling vmtruncate().
There seems a disagreement among the callers of that function.
b) We change the ext4 write path so that we change the extent tree to contain
the newly allocated blocks and update i_size both at the same time --- when
the write of the data blocks is completed.
c) We add some additional locking to synchronize vmtruncate() and
ext4_end_io_work(). This approach may have performance implications so we
need to be careful.
All of the above proposals may require more substantial changes, so
we may consider to take the following patch as a bandaid.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Call ext4_std_error() in various places when we can't bail out
cleanly, so the file system can be marked as in error.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
|
|
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Modified to hit the right file]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
|
|
Dynamically detect the DBx500 SOC an revision based on the ASIC ID.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
|
|
Rename the MOP board Kconfig entries to the same name as the machine
type, so that the machine_is_*() macros work correctly.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Updated to match changes in the tree]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
|
|
To allow the possiblity of building U8500 and U5500 support in the same
image.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
[Rebased to latest changes in Russells tree]
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
|
|
When ext4_trim_fs() is called to trim a part of a single group, the
logic will wrongly set last block of the interval to 'len' instead
of 'first_block + len'. Thus a shorter interval is possibly trimmed.
Fix it.
CC: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
fs/ext4/super.c: In function 'ext4_register_li_request':
fs/ext4/super.c:2936: warning: 'ret' may be used uninitialized in this function
It looks buggy to me, too.
Cc: Lukas Czerner <lczerner@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
|
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing. This allows us to further slim down the ext4_inode_info
structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
|
