summaryrefslogtreecommitdiffstats
path: root/include/net (follow)
Commit message (Collapse)AuthorAgeFilesLines
* netfilter: conntrack: use a single hashtable for all namespacesFlorian Westphal2016-05-052-2/+1
| | | | | | | | | | | | | | | | | We already include netns address in the hash and compare the netns pointers during lookup, so even if namespaces have overlapping addresses entries will be spread across the table. Assuming 64k bucket size, this change saves 0.5 mbyte per namespace on a 64bit system. NAT bysrc and expectation hash is still per namespace, those will changed too soon. Future patch will also make conntrack object slab cache global again. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* Merge tag 'ipvs-for-v4.7' of ↵Pablo Neira Ayuso2016-04-251-0/+17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next Simon Horman says: ==================== IPVS Updates for v4.7 please consider these enhancements to the IPVS. They allow SIP connections originating from real-servers to be load balanced by the SIP psersitence engine as is already implemented in the other direction. And for better one packet scheduling (OPS) performance. ==================== Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * ipvs: handle connections started by real-serversMarco Angaroni2016-04-201-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using LVS-NAT and SIP persistence-egine over UDP, the following limitations are present with current implementation: 1) To actually have load-balancing based on Call-ID header, you need to use one-packet-scheduling mode. But with one-packet-scheduling the connection is deleted just after packet is forwarded, so SIP responses coming from real-servers do not match any connection and SNAT is not applied. 2) If you do not use "-o" option, IPVS behaves as normal UDP load balancer, so different SIP calls (each one identified by a different Call-ID) coming from the same ip-address/port go to the same real-server. So basically you don’t have load-balancing based on Call-ID as intended. 3) Call-ID is not learned when a new SIP call is started by a real-server (inside-to-outside direction), but only in the outside-to-inside direction. This would be a general problem for all SIP servers acting as Back2BackUserAgent. This patch aims to solve problems 1) and 3) while keeping OPS mode mandatory for SIP-UDP, so that 2) is not a problem anymore. The basic mechanism implemented is to make packets, that do not match any existent connection but come from real-servers, create new connections instead of let them pass without any effect. When such packets pass through ip_vs_out(), if their source ip address and source port match a configured real-server, a new connection is automatically created in the same way as it would have happened if the packet had come from outside-to-inside direction. A new connection template is created too if the virtual-service is persistent and there is no matching connection template found. The new connection automatically created, if the service had "-o" option, is an OPS connection that lasts only the time to forward the packet, just like it happens on the ingress side. The main part of this mechanism is implemented inside a persistent-engine specific callback (at the moment only SIP persistent engine exists) and is triggered only for UDP packets, since connection oriented protocols, by using different set of ports (typically ephemeral ports) to open new outgoing connections, should not need this feature. The following requisites are needed for automatic connection creation; if any is missing the packet simply goes the same way as before. a) virtual-service is not fwmark based (this is because fwmark services do not store address and port of the virtual-service, required to build the connection data). b) virtual-service and real-servers must not have been configured with omitted port (this is again to have all data to create the connection). Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au>
* | netfilter: conntrack: use get_random_once for conntrack hash seedFlorian Westphal2016-04-251-2/+0
| | | | | | | | | | | | | | | | As earlier commit removed accessed to the hash from other files we can also make it static. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | netfilter: conntrack: move generation seqcnt out of netns_ctFlorian Westphal2016-04-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | We only allow rehash in init namespace, so we only use init_ns.generation. And even if we would allow it, it makes no sense as the conntrack locks are global; any ongoing rehash prevents insert/ delete. So make this private to nf_conntrack_core instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | tcp-tso: do not split TSO packets at retransmit timeEric Dumazet2016-04-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux TCP stack painfully segments all TSO/GSO packets before retransmits. This was fine back in the days when TSO/GSO were emerging, with their bugs, but we believe the dark age is over. Keeping big packets in write queues, but also in stack traversal has a lot of benefits. - Less memory overhead, because write queues have less skbs - Less cpu overhead at ACK processing. - Better SACK processing, as lot of studies mentioned how awful linux was at this ;) - Less cpu overhead to send the rtx packets (IP stack traversal, netfilter traversal, drivers...) - Better latencies in presence of losses. - Smaller spikes in fq like packet schedulers, as retransmits are not constrained by TCP Small Queues. 1 % packet losses are common today, and at 100Gbit speeds, this translates to ~80,000 losses per second. Losses are often correlated, and we see many retransmit events leading to 1-MSS train of packets, at the time hosts are already under stress. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller2016-04-241-3/+2
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, mostly from Florian Westphal to sort out the lack of sufficient validation in x_tables and connlabel preparation patches to add nf_tables support. They are: 1) Ensure we don't go over the ruleset blob boundaries in mark_source_chains(). 2) Validate that target jumps land on an existing xt_entry. This extra sanitization comes with a performance penalty when loading the ruleset. 3) Introduce xt_check_entry_offsets() and use it from {arp,ip,ip6}tables. 4) Get rid of the smallish check_entry() functions in {arp,ip,ip6}tables. 5) Make sure the minimal possible target size in x_tables. 6) Similar to #3, add xt_compat_check_entry_offsets() for compat code. 7) Check that standard target size is valid. 8) More sanitization to ensure that the target_offset field is correct. 9) Add xt_check_entry_match() to validate that matches are well-formed. 10-12) Three patch to reduce the number of parameters in translate_compat_table() for {arp,ip,ip6}tables by using a container structure. 13) No need to return value from xt_compat_match_from_user(), so make it void. 14) Consolidate translate_table() so it can be used by compat code too. 15) Remove obsolete check for compat code, so we keep consistent with what was already removed in the native layout code (back in 2007). 16) Get rid of target jump validation from mark_source_chains(), obsoleted by #2. 17) Introduce xt_copy_counters_from_user() to consolidate counter copying, and use it from {arp,ip,ip6}tables. 18,22) Get rid of unnecessary explicit inlining in ctnetlink for dump functions. 19) Move nf_connlabel_match() to xt_connlabel. 20) Skip event notification if connlabel did not change. 21) Update of nf_connlabels_get() to make the upcoming nft connlabel support easier. 23) Remove spinlock to read protocol state field in conntrack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * netfilter: connlabels: change nf_connlabels_get bit arg to 'highest used'Florian Westphal2016-04-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nf_connlabel_set() takes the bit number that we would like to set. nf_connlabels_get() however took the number of bits that we want to support. So e.g. nf_connlabels_get(32) support bits 0 to 31, but not 32. This changes nf_connlabels_get() to take the highest bit that we want to set. Callers then don't have to cope with a potential integer wrap when using nf_connlabels_get(bit + 1) anymore. Current callers are fine, this change is only to make folloup nft ct label set support simpler. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
| * netfilter: connlabels: move helpers to xt_connlabelFlorian Westphal2016-04-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | Currently labels can only be set either by iptables connlabel match or via ctnetlink. Before adding nftables set support, clean up the clabel core and move helpers that nft will not need after all to the xtables module. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* | libnl: add nla_put_u64_64bit() helperNicolas Dichtel2016-04-241-0/+13
| | | | | | | | | | | | | | With this function, nla_data() is aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | libnl: nla_put_msecs(): align on a 64-bit areaNicolas Dichtel2016-04-241-4/+7
| | | | | | | | | | | | | | nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | libnl: nla_put_s64(): align on a 64-bit areaNicolas Dichtel2016-04-241-4/+7
| | | | | | | | | | | | | | | | nla_data() is now aligned on a 64-bit area. In fact, there is no user of this function. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | libnl: nla_put_net64(): align on a 64-bit areaNicolas Dichtel2016-04-241-8/+6
| | | | | | | | | | | | | | | | | | nla_data() is now aligned on a 64-bit area. The temporary function nla_put_be64_32bit() is removed in this patch. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | libnl: nla_put_be64(): align on a 64-bit areaNicolas Dichtel2016-04-241-4/+11
| | | | | | | | | | | | | | | | | | | | nla_data() is now aligned on a 64-bit area. A temporary version (nla_put_be64_32bit()) is added for nla_put_net64(). This function is removed in the next patch. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | libnl: nla_put_le64(): align on a 64-bit areaNicolas Dichtel2016-04-242-3/+11
| | | | | | | | | | | | | | nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-04-247-4/+27
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | tcp: Merge tx_flags and tskey in tcp_shifted_skbMartin KaFai Lau2016-04-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cls_cgroup: get sk_classid only from full socketsKonstantin Khlebnikov2016-04-201-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | skb->sk could point to timewait or request socket which has no sk_classid. Detected as "BUG: KASAN: slab-out-of-bounds in cls_cgroup_classify". Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | soreuseport: fix ordering for mixed v4/v6 socketsCraig Gallek2016-04-151-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the SO_REUSEPORT socket option, it is possible to create sockets in the AF_INET and AF_INET6 domains which are bound to the same IPv4 address. This is only possible with SO_REUSEPORT and when not using IPV6_V6ONLY on the AF_INET6 sockets. Prior to the commits referenced below, an incoming IPv4 packet would always be routed to a socket of type AF_INET when this mixed-mode was used. After those changes, the same packet would be routed to the most recently bound socket (if this happened to be an AF_INET6 socket, it would have an IPv4 mapped IPv6 address). The change in behavior occurred because the recent SO_REUSEPORT optimizations short-circuit the socket scoring logic as soon as they find a match. They did not take into account the scoring logic that favors AF_INET sockets over AF_INET6 sockets in the event of a tie. To fix this problem, this patch changes the insertion order of AF_INET and AF_INET6 addresses in the TCP and UDP socket lists when the sockets have SO_REUSEPORT set. AF_INET sockets will be inserted at the head of the list and AF_INET6 sockets with SO_REUSEPORT set will always be inserted at the tail of the list. This will force AF_INET sockets to always be considered first. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: 125e80b88687 ("soreuseport: fast reuseport TCP socket selection") Reported-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: udp: Do a route lookup and update during release_cbMartin KaFai Lau2016-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a release_cb for UDPv6. It does a route lookup and updates sk->sk_dst_cache if it is needed. It picks up the left-over job from ip6_sk_update_pmtu() if the sk was owned by user during the pmtu update. It takes a rcu_read_lock to protect the __sk_dst_get() operations because another thread may do ip6_dst_store() without taking the sk lock (e.g. sendmsg). Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ipv6: datagram: Update dst cache of a connected datagram sk during pmtu updateMartin KaFai Lau2016-04-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: vrf: Fix dst reference countingDavid Ahern2016-04-112-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vivek reported a kernel exception deleting a VRF with an active connection through it. The root cause is that the socket has a cached reference to a dst that is destroyed. Converting the dst_destroy to dst_release and letting proper reference counting kick in does not work as the dst has a reference to the device which needs to be released as well. I talked to Hannes about this at netdev and he pointed out the ipv4 and ipv6 dst handling has dst_ifdown for just this scenario. Rather than continuing with the reinvented dst wheel in VRF just remove it and leverage the ipv4 and ipv6 versions. Fixes: 193125dbd8eb2 ("net: Introduce VRF device driver") Fixes: 35402e3136634 ("net: Add IPv6 support to VRF device") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | sctp: avoid refreshing heartbeat timer too oftenMarcelo Ricardo Leitner2016-04-111-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently on high rate SCTP streams the heartbeat timer refresh can consume quite a lot of resources as timer updates are costly and it contains a random factor, which a) is also costly and b) invalidates mod_timer() optimization for not editing a timer to the same value. It may even cause the timer to be slightly advanced, for no good reason. As suggested by David Laight this patch now removes this timer update from hot path by leaving the timer on and re-evaluating upon its expiration if the heartbeat is still needed or not, similarly to what is done for TCP. If it's not needed anymore the timer is re-scheduled to the new timeout, considering the time already elapsed. For this, we now record the last tx timestamp per transport, updated in the same spots as hb timer was restarted on tx. Also split up sctp_transport_reset_timers into sctp_transport_reset_t3_rtx and sctp_transport_reset_hb_timer, so we can re-arm T3 without re-arming the heartbeat one. On loopback with MTU of 65535 and data chunks with 1636, so that we have a considerable amount of chunks without stressing system calls, netperf -t SCTP_STREAM -l 30, perf looked like this before: Samples: 103K of event 'cpu-clock', Event count (approx.): 25833000000 Overhead Command Shared Object Symbol + 6,15% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,43% netperf [kernel.vmlinux] [k] _raw_write_unlock_irqrestore - _raw_write_unlock_irqrestore - 96,54% _raw_spin_unlock_irqrestore - 36,14% mod_timer + 97,24% sctp_transport_reset_timers + 2,76% sctp_do_sm + 33,65% __wake_up_sync_key + 28,77% sctp_ulpq_tail_event + 1,40% del_timer - 1,84% mod_timer + 99,03% sctp_transport_reset_timers + 0,97% sctp_do_sm + 1,50% sctp_ulpq_tail_event And after this patch, now with netperf -l 60: Samples: 230K of event 'cpu-clock', Event count (approx.): 57707250000 Overhead Command Shared Object Symbol + 5,65% netperf [kernel.vmlinux] [k] memcpy_erms + 5,59% netperf [kernel.vmlinux] [k] copy_user_enhanced_fast_string - 5,05% netperf [kernel.vmlinux] [k] _raw_spin_unlock_irqrestore - _raw_spin_unlock_irqrestore + 49,89% __wake_up_sync_key + 45,68% sctp_ulpq_tail_event - 2,85% mod_timer + 76,51% sctp_transport_reset_t3_rtx + 23,49% sctp_do_sm + 1,55% del_timer + 2,50% netperf [sctp] [k] sctp_datamsg_from_user + 2,26% netperf [sctp] [k] sctp_sendmsg Throughput-wise, from 6800mbps without the patch to 7050mbps with it, ~3.7%. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | geneve: break dependency with netdev driversHannes Frederic Sowa2016-04-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Equivalent to "vxlan: break dependency with netdev drivers", don't autoload geneve module in case the driver is loaded. Instead make the coupling weaker by using netdevice notifiers as proxy. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | vxlan: break dependency with netdev driversHannes Frederic Sowa2016-04-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all drivers depend and autoload the vxlan module because how vxlan_get_rx_port is linked into them. Remove this dependency: By using a new event type in the netdevice notifier call chain we proxy the request from the drivers to flush and resetup the vxlan ports not directly via function call but by the already existing netdevice notifier call chain. I added a separate new event type, NETDEV_OFFLOAD_PUSH_VXLAN, to do so. We don't need to save those ids, as the event type field is an unsigned long and using specialized event types for this purpose seemed to be a more elegant way. This also comes in beneficial if in future we want to add offloading knobs for vxlan. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | libnl: add more helpers to align attributes on 64-bitNicolas Dichtel2016-04-211-8/+31
| | | | | | | | | | | | | | | Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: dsa: remove tag_protocol from dsa_switchVivien Didelot2016-04-211-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | Having the tag protocol in dsa_switch_driver for setup time and in dsa_switch_tree for runtime is enough. Remove dsa_switch's one. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: nla_align_64bit() needs to test the right pointer.David S. Miller2016-04-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Netlink messages are appended, one object at a time, to the end of the SKB. Therefore we need to test skb_tail_pointer() not skb->data for alignment. Fixes: 35c5845957c7 ("net: Add helpers for 64-bit aligning netlink attributes.") Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: fix HAVE_EFFICIENT_UNALIGNED_ACCESS typosEric Dumazet2016-04-201-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HAVE_EFFICIENT_UNALIGNED_ACCESS needs CONFIG_ prefix. Also add a comment in nla_align_64bit() explaining we have to add a padding if current skb->data is aligned, as it certainly can be confusing. Fixes: 35c5845957c7 ("net: Add helpers for 64-bit aligning netlink attributes.") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: Add helpers for 64-bit aligning netlink attributes.David S. Miller2016-04-201-0/+37
| | | | | | | | | | | | | | | | | | Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: dsa: constify probed nameVivien Didelot2016-04-181-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | Change the dsa_switch_driver.probe function to return a const char *. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ip_tunnel_core: iptunnel_handle_offloads returns int and doesn't free skbAlexander Duyck2016-04-172-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the IP tunnel core function iptunnel_handle_offloads so that we return an int and do not free the skb inside the function. This actually allows us to clean up several paths in several tunnels so that we can free the skb at one point in the path without having to have a secondary path if we are supporting tunnel offloads. In addition it should resolve some double-free issues I have found in the tunnels paths as I believe it is possible for us to end up triggering such an event in the case of fou or gue. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | vxlan: synchronously and race-free destruction of vxlan socketsHannes Frederic Sowa2016-04-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the fact that the udp socket is destructed asynchronously in a work queue, we have some nondeterministic behavior during shutdown of vxlan tunnels and creating new ones. Fix this by keeping the destruction process synchronous in regards to the user space process so IFF_UP can be reliably set. udp_tunnel_sock_release destroys vs->sock->sk if reference counter indicates so. We expect to have the same lifetime of vxlan_sock and vxlan_sock->sock->sk even in fast paths with only rcu locks held. So only destruct the whole socket after we can be sure it cannot be found by searching vxlan_net->sock_list. Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Jiri Benc <jbenc@redhat.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sctp: export some apis or variables for sctp_diag and reuse some for procXin Long2016-04-151-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For some main variables in sctp.ko, we couldn't export it to other modules, so we have to define some api to access them. It will include sctp transport and endpoint's traversal. There are some transport traversal functions for sctp_diag, we can also use it for sctp_proc. cause they have the similar situation to traversal transport. v2->v3: - rhashtable_walk_init need the parameter gfp, because of recent upstrem update Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sctp: add sctp_info dump api for sctp_diagXin Long2016-04-151-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sctp_diag will dump some important details of sctp's assoc or ep, we use sctp_info to describe them, sctp_get_sctp_info to get them, and export it to sctp_diag.ko. v2->v3: - we will not use list_for_each_safe in sctp_get_sctp_info, cause all the callers of it will use lock_sock. - fix the holes in struct sctp_info with __reserved* field. because sctp_diag is a new feature, and sctp_info is just for now, it may be changed in the future. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sctp: simplify sk_receive_queue lockingMarcelo Ricardo Leitner2016-04-151-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SCTP already serializes access to rcvbuf through its sock lock: sctp_recvmsg takes it right in the start and release at the end, while rx path will also take the lock before doing any socket processing. On sctp_rcv() it will check if there is an user using the socket and, if there is, it will queue incoming packets to the backlog. The backlog processing will do the same. Even timers will do such check and re-schedule if an user is using the socket. Simplifying this will allow us to remove sctp_skb_list_tail and get ride of some expensive lockings. The lists that it is used on are also mangled with functions like __skb_queue_tail and __skb_unlink in the same context, like on sctp_ulpq_tail_event() and sctp_clear_pd(). sctp_close() will also purge those while using only the sock lock. Therefore the lockings performed by sctp_skb_list_tail() are not necessary. This patch removes this function and replaces its calls with just skb_queue_splice_tail_init() instead. The biggest gain is at sctp_ulpq_tail_event(), because the events always contain a list, even if it's queueing a single skb and this was triggering expensive calls to spin_lock_irqsave/_irqrestore for every data chunk received. As SCTP will deliver each data chunk on a corresponding recvmsg, the more effective the change will be. Before this patch, with chunks with 30 bytes: netperf -t SCTP_STREAM -H 192.168.1.2 -cC -l 60 -- -m 30 -S 400000 400000 -s 400000 400000 on a 10Gbit link with 1500 MTU: SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 425984 425984 30 60.00 137.45 7.34 7.36 52.504 52.608 With it: SCTP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 () port 0 AF_INET Recv Send Send Utilization Service Demand Socket Socket Message Elapsed Send Recv Send Recv Size Size Size Time Throughput local remote local remote bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB 425984 425984 30 60.00 179.10 7.97 6.70 43.740 36.788 Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | tcp: do not mess with listener sk_wmem_allocEric Dumazet2016-04-151-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When removing sk_refcnt manipulation on synflood, I missed that using skb_set_owner_w() was racy, if sk->sk_wmem_alloc had already transitioned to 0. We should hold sk_refcnt instead, but this is a big deal under attack. (Doing so increase performance from 3.2 Mpps to 3.8 Mpps only) In this patch, I chose to not attach a socket to syncookies skb. Performance is now 5 Mpps instead of 3.2 Mpps. Following patch will remove last known false sharing in tcp_rcv_state_process() Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | devlink: fix sb register stub in case devlink is disabledJiri Pirko2016-04-151-1/+3
| | | | | | | | | | | | | | | | | | | | | Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: bf7974710a40 ("devlink: add shared buffer configuration") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | devlink: implement shared buffer occupancy monitoring interfaceJiri Pirko2016-04-141-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | User needs to monitor shared buffer occupancy. For that, he issues a snapshot command in order to instruct hardware to catch current and maximal occupancy values, and clear command in order to clear the historical maximal values. Also port-pool and tc-pool-bind command response messages are extended to carry occupancy values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | devlink: add shared buffer configurationJiri Pirko2016-04-141-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Define userspace API and drivers API for configuration of shared buffers. Four basic objects are defined: shared buffer - attributes are size, number of pools and TCs pool - chunk of sharedbuffer definition, it has some size and either static or dynamic threshold port pool threshold - to set per-port threshold for each pool port tc threshold bind - to bind port and TC to specified pool with threshold. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | gre: eliminate holes in ip_tunnelstephen hemminger2016-04-141-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | The structure can be packed denser by doing minor rearrangement of existing elements. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sctp: delay calls to sk_data_ready() as much as possibleMarcelo Ricardo Leitner2016-04-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently processing of multiple chunks in a single SCTP packet leads to multiple calls to sk_data_ready, causing multiple wake up signals which are costy and doesn't make it wake up any faster. With this patch it will note that the wake up is pending and will do it before leaving the state machine interpreter, latest place possible to do it realiably and cleanly. Note that sk_data_ready events are not dependent on asocs, unlike waking up writers. v2: series re-checked v3: use local vars to cleanup the code, suggested by Jakub Sitnicki Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sctp: compress bit-wide flags to a bitfield on sctp_sockMarcelo Ricardo Leitner2016-04-141-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It wastes space and gets worse as we add new flags, so convert bit-wide flags to a bitfield. Currently it already saves 4 bytes in sctp_sock, which are left as holes in it for now. The whole struct needs packing, which should be done in another patch. Note that do_auto_asconf cannot be merged, as explained in the comment before it. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: force inlining of netif_tx_start/stop_queue, sock_hold, __sock_putDenys Vlasenko2016-04-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sometimes gcc mysteriously doesn't inline very small functions we expect to be inlined. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 Arguably, gcc should do better, but gcc people aren't willing to invest time into it, asking to use __always_inline instead. With this .config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os, the following functions get deinlined many times. netif_tx_stop_queue: 207 copies, 590 calls: 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 8f e0 01 00 00 01 lock orb $0x1,0x1e0(%rdi) 5d pop %rbp c3 retq netif_tx_start_queue: 47 copies, 111 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 a7 e0 01 00 00 fe lock andb $0xfe,0x1e0(%rdi) 5d pop %rbp c3 retq sock_hold: 39 copies, 124 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 ff 87 80 00 00 00 lock incl 0x80(%rdi) 5d pop %rbp c3 retq __sock_put: 6 copies, 13 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 ff 8f 80 00 00 00 lock decl 0x80(%rdi) 5d pop %rbp c3 retq This patch fixes this via s/inline/__always_inline/. Code size decrease after the patch is ~2.5k: text data bss dec hex filename 56719876 56364551 36196352 149280779 8e5d80b vmlinux_before 56717440 56364551 36196352 149278343 8e5ce87 vmlinux Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: netfilter-devel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | | sock: tigthen lockdep checks for sock_owned_by_userHannes Frederic Sowa2016-04-141-15/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sock_owned_by_user should not be used without socket lock held. It seems to be a common practice to check .owned before lock reclassification, so provide a little help to abstract this check away. Cc: linux-cifs@vger.kernel.org Cc: linux-bluetooth@vger.kernel.org Cc: linux-nfs@vger.kernel.org Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | dsa: Rename phys_port_mask to enabled_port_maskAndrew Lunn2016-04-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: dsa: Remove allocation of driver private memoryAndrew Lunn2016-04-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The drivers now allocate their own memory for private usage. Remove the allocation from the core code. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: dsa: Have the switch driver allocate there own private memoryAndrew Lunn2016-04-141-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: dsa: Pass the dsa device to the switch driversAndrew Lunn2016-04-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By passing a device structure to the switch devices, it allows them to use devm_* methods for resource management. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge tag 'mac80211-next-for-davem-2016-04-13' of ↵David S. Miller2016-04-132-41/+41
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== To synchronize with Kalle, here's just a big change that affects all drivers - removing the duplicated enum ieee80211_band and replacing it by enum nl80211_band. On top of that, just a small documentation update. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-22 08:01:32 +0100