| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently, whenever AP link is brought down via ieee80211_stop_ap()
function, all stations connected to the sdata are flushed. However, in case
of MLO there is a requirement to flush only stations connected to that link
and not all.
For instance - Consider 2 GHz and 5 GHz are AP MLD. Now due to some reason
5 GHz link of this AP is going down (link removal or any other case). All
stations connected, even legacy stations connected to 2 GHz link AP would
also be flushed. Flushing of other link stations is not desirable.
Fix this issue by passing self link ID to sta_flush() function. This would
then only remove the stations which are still using the passed link
ID as their link sta. Other stations will not be affected.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-4-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Whenever sta_flush() function is invoked, all STAs present in that
interface are flushed. In case of MLO, it is desirable to only flush such
STAs that are at least using a given link id as one of their links.
Add support for this by making change in the __sta_info_flush API argument
to accept a link ID. And then, only if the STA is using the given link as
one of its links, it would be flushed.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-3-quic_adisi@quicinc.com
[reword commit message, in particular this isn't about "active" links]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently whenever NL80211_CMD_DEL_STATION command is called without any
MAC address, all stations present on that interface are flushed.
However with MLO there is a need to flush such stations only which are
using at least a particular link from the AP MLD interface.
For example - 2 GHz and 5 GHz are part of an AP MLD.
To this interface, following stations are connected -
1. One non-EHT STA on 2 GHz link.
2. One non-EHT STA on 5 GHz link.
3. One Multi-Link STA having 2 GHz and 5 GHz as active links.
Now if currently, NL80211_CMD_DEL_STATION is issued by the 2 GHz link
without any MAC address, it would flush all station entries. However,
flushing of station entry #2 at least is not desireable since it
is connected to 5 GHz link alone.
Hence, add an option to pass link ID as well in the command so that if link
ID is passed, stations using that passed link ID alone would be flushed
and others will not.
So after this, station entries #1 and #3 alone would be flushed and #2 will
remain as it is.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240205162952.1697646-2-quic_adisi@quicinc.com
[clarify documentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Get rid of gfp parameter from ieee80211_obss_color_collision_notify
since it is no longer used.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/f91e1c78896408ac556586ba8c99e4e389aeba02.1707389901.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since WiFi 7 is expected to support MLO, so we should enable MAC-0/1 and
PHY-0/1. By default, set dbcc_en=true, change quota to DBCC mode, and set
MLO mode to 2 + 0 that means we only use 2x2 connection on MAC/PHY-0
for now.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-12-pkshih@realtek.com
|
|
Reference the current quota mode to avoid misleading warnings.
This patch is required after supporting DBCC quota mode.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-11-pkshih@realtek.com
|
|
Modify reg for BE generation when AP stop, otherwise have warning
messages "Polling beacon packet empty fail".
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-10-pkshih@realtek.com
|
|
ctrl_nbtg_bt_tx()
ctrl_nbtg_bt_tx is used to control AGC settings under non-shared path
condition, which is affected by BT TX. To speed up IO, merge continual
bit mask into one IO. Also, correct a register definition.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-9-pkshih@realtek.com
|
|
When there are OBSS that cannot interpret 26-tone RU transmissions,
we should disable 26-tone RU HE TB PPDU transmissions. So, add registers
accordingly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-8-pkshih@realtek.com
|
|
Hardware can use spatial reuse to reduce interference in OBSS environment,
and originally use MAC header to match BSS color and AID. Change to use
PLCP to match them earlier to prevent margin timing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-7-pkshih@realtek.com
|
|
When going to use PHY-1, reset the hardware to make it work properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-6-pkshih@realtek.com
|
|
Consider mac_idx as an argument to set this register to disable QoS NULL
update MUEDCA timer.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-5-pkshih@realtek.com
|
|
DLE (data link engine) could hold quota when we are going to enable/disable
MAC-1 block, so trigger hardware to return all held quota.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-4-pkshih@realtek.com
|
|
We are going to support MLO/DBCC, so need to load parameter table to
PHY-1 as well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-3-pkshih@realtek.com
|
|
PHY-1 can be seen as a copy of PHY-0, and the difference is their base
register address, so add a function to get offset to access PHY-1.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240209065229.34515-2-pkshih@realtek.com
|
|
In 'brcmf_cfg80211_start_ap()', not assume that
NL80211_HIDDEN_SSID_NOT_IN_USE is zero but prefer
an explicit check instead. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Berezhok <a@bayrepo.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240208085121.2430-1-a@bayrepo.ru
|
|
mwifiex_ie_types_chan_list_param_set
struct mwifiex_ie_types_chan_list_param_set::chan_scan_param is treated
as a flexible array, so convert it into one so that it doesn't trip
the array bounds sanitizer[1]. Only a few places were using sizeof()
on the whole struct, so adjust those to follow the calculation pattern
to avoid including the trailing single element.
Examining binary output differences doesn't appear to show any literal
size values changing, though it is obfuscated a bit by the compiler
adjusting register usage and stack spill slots, etc.
Link: https://github.com/KSPP/linux/issues/51 [1]
Cc: Brian Norris <briannorris@chromium.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: zuoqilin <zuoqilin@yulong.com>
Cc: Ruan Jinjie <ruanjinjie@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: linux-wireless@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240207103024.make.423-kees@kernel.org
|
|
Document
ATWILC1000/ATWILC3000
Baremetal Wi-Fi/BLE Link Controller Software Design Guide
https://tinyurl.com/yer2xhyc
says that bit 0 of the CRC7 code must always be a 1.
I confirmed that today with a logic analyzer: setting bit 0 causes
wilc1000 to accept a command with CRC7 enabled, whereas clearing bit 0
causes wilc1000 to reject the command with a CRC error.
Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240207050736.2717641-1-davidm@egauge.net
|
|
During mac80211 reconfig, chanctx ops of multiple channels might not
be called in order as normal cases. However, we expect the first active
chanctx always to be put at our sub entity index 0. So, if it does not,
we do a swap there. Besides, reconfig won't allocate a new chanctx object.
So, we should reset the reference count when ops add chanctx.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-7-pkshih@realtek.com
|
|
After MLO, we will need to consider not only active chanctx but also active
interfaces (roles) to decide entity things. So in advance, we move handling
from chanctx_ops::add/remove to chanctx_ops::assign_vif/unassign_vif. Then,
we can recalculate and aware active interfaces' changes.
For now, behavior should not be really different, since active chanctx and
active interface are one-to-one mapping before MLO.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-6-pkshih@realtek.com
|
|
Originally, we consider weight only based on how many chanctxs that
mac80211 sets. However, we need to consider both active chanctxs and
active interfaces to distinguish MCC (multiple channel concurrent)
from impending MLO.
Although the logic of handling is extended, for now, behavior might
not be different under current condition.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-5-pkshih@realtek.com
|
|
Originally, we just declared two sub-entity, and according to rolling
down mechanism, we ensured that index 0 contained sub-entity as long
as there are sub-entity. So, we could use for-loop after deciding the
last index.
But, we are preparing to expand num of sub-entity for MLO. Then, there
won't be just two sub-entity. And, there might be holes between two bits
in the bitmap. So, we cannot simply do for-loop as before. Instead, we
need to follow the set bits.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-4-pkshih@realtek.com
|
|
Originally, we replaced sub-entity of index 0 with another one in some
cases. However, we will need a swap here in following implementations.
So, we introduce it ahead and change code from replacing to swapping.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-3-pkshih@realtek.com
|
|
Some of our calculation during concurrent mode depend on last beacon
TSF. Originally, we just set IEEE80211_HW_TIMING_BEACON_ONLY and get
what we want from mac80211. But, IEEE80211_HW_TIMING_BEACON_ONLY will
be restricted once we declare MLO.
Since we are about to consider the MLO stuffs, so sync beacon TSF by
ourselves now and unset IEEE80211_HW_TIMING_BEACON_ONLY.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240206030624.23382-2-pkshih@realtek.com
|
|
WILC driver currently applies some default configuration whenever the firmware
is initialized, and sets the default preamble size to short. However, despite
this passed option, firmware is also able to successfully connect to access
points only using long preamble, so this setting does not really enforce short
preambles and is misleading regarding applied configuration.
Update default configuration and make it match the firmware behavior by passing
the existing WILC_FW_PREAMBLE_AUTO value (2 instead of 0). The updated setting
does not really alter firmware behavior since it is still capable to connect to
both short preamble and long preamble access points, but at list the setting now
expresses for real the corresponding firmware behavior.
More info: it has been implemented to address the transmission (Tx) blackout
issue observed in the 802.11b mode. The modification has no impact on the other
modes, which will continue to work as they did in the previous implementation.
This change will allow the 802.11b transmission (2, 5.5, 11Mbps) to use long
preamble.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115-wilc_1000_fixes-v1-1-54d29463a738@bootlin.com
|
|
Use convenient 'kstrtou32_from_user()' in 'mwifiex_verext_write()'
and 'kstrtobool_from_user()' in 'mwifiex_timeshare_coex_write()',
respectively. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240110115314.421298-1-dmantipov@yandex.ru
|
|
The #ifdef check around the function definition for two functions was
changed without also changing the one on the declaration:
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:359:6: error: redefinition of 'iwl_uefi_get_sgom_table'
359 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/intel/iwlwifi/fw/uefi.c:11:
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:294:6: note: previous definition of 'iwl_uefi_get_sgom_table' with type 'void(struct iwl_trans *, struct iwl_fw_runtime *)'
294 | void iwl_uefi_get_sgom_table(struct iwl_trans *trans, struct iwl_fw_runtime *fwrt)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.c:392:5: error: redefinition of 'iwl_uefi_get_uats_table'
392 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/intel/iwlwifi/fw/uefi.h:299:5: note: previous definition of 'iwl_uefi_get_uats_table' with type 'int(struct iwl_trans *, struct iwl_fw_runtime *)'
299 | int iwl_uefi_get_uats_table(struct iwl_trans *trans,
| ^~~~~~~~~~~~~~~~~~~~~~~
Adapt it by merging the declarations into the existing #ifdef block.
Fixes: 74f4cd710705 ("wifi: iwlwifi: take SGOM and UATS code out of ACPI ifdef")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/20240212112343.1148931-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was still referring to cfg80211_chandef_primary_freq(),
fix it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: b82730bf57b5 ("wifi: cfg80211/mac80211: move puncturing into chandef")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We've seen this warning trigger, and while the reason is
probably obvious, I haven't been able to see it yet. Add
more information to the warning message to help identify
the cause. Also print out both index and SSN for all the
messages.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.581427dc81fc.I9a109d02b4349807dce521c693ecd3516ec58cc0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is always a bit confusing, the code first does all the
reclaim (with its own debug messages), and _then_ prints it
got a BA notification from firmware. Turn that around.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.825245e0803f.Ic607c57f43eb7c7ff122ffee8f3994fd040d578f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If this warning triggers we don't really know why, print out
the return value so we can see it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.b1b907741e85.Ib8ee9c90bd8f1af69969981ff0c63e9cc3123e1f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The flags argument to enable/disable beacon filtering functions
is unused and always zero, so just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2c739c1034a5.I8619949ad4ebd31593d10ece371ebdc6c48db98f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware (later) actually uses the values even for keys
that are invalid as far as the host is concerned, later in
rekeying, and then only sets the low 48 bits since the PNs
are only 48 bits over the air. It does, however, compare the
full 64 bits later, obviously causing problems.
Remove the memset and use kzalloc instead to avoid any old
heap data leaking to the firmware. We already init all the
other fields in the struct anyway. This leaves the data set
to zero for any unused fields, so the firmware can look at
them safely even if they're not used right now.
Fixes: 79e561f0f05a ("iwlwifi: mvm: d3: implement RSC command version 5")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.462101146fef.I10f3855b99417af4247cff04af78dcbc6cb75c9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the support for a new PCIE device-id 0x272E and a new CNVI
type.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.506db9b4a664.Ia2e3a77b880c449ac0e8d20b8cea25e6f07f1b81@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Newer firmware versions no longer needs this command. Don't send it if
the firmware advertises it does not need it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.527595995aa0.I0381bef1dc815945f2ec194fecc657e5c75bb2ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The firmware doesn't need the MFP flag for the GTK, it can even make the
firmware crash. in case the AP is configured with: group cipher TKIP and
MFPC. We would send the GTK with cipher = TKIP and MFP which is of course
not possible.
Fixes: 5c75a208c244 ("wifi: iwlwifi: mvm: support new key API")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.2f2c602ab3c6.If13b2e2fa532381d985c07df130bee1478046c89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This image can be pretty big (I've seen order-7 allocations!),
and we later have to copy it to DMA memory (in newer FW even
there it won't need to be contiguous), so we can easily deal
with it being in vmalloc. Use kvmemdup()/kvfree() for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.9b4c06b5d533.Idf699b36ec95ee36f530355cd2cb1da297a098f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For non-QoS nullfunc packets we currently do the duplicate detection,
which seems a bit wrong. Fix the code to check for _any_ instead of
just _qos_ nullfunc.
Also remove setting the RX_FLAG_DUP_VALIDATED flag, we haven't done
anything here; in particular, we haven't checked for multicast in an
MLO scenario.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4fea3bd2d4a6.Ib80764f4581d875cff08469016894f7c817c3828@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When retrieving the queue index ("SCD SSN") from the TX response,
it's currently masked with 0xFFF. However, now that we have queues
longer than 4k, that became wrong, so make the mask depend on the
hardware family.
This fixes an issue where if we get a single frame reclaim while
in the top half of an 8k long queue, we'd reclaim-wrap the queue
twice (once on this and then again on the next non-single reclaim)
which at least triggers the WARN_ON_ONCE() in iwl_txq_reclaim(),
but could have other negative side effects (such as unmapping a
frame that wasn't transmitted yet, and then taking an IOMMU fault)
as well.
Fixes: 7b3e42ea2ead ("iwlwifi: support multiple tfd queue max sizes for different devices")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4148a6ef54e0.I733a70f679c25f9f99097a8dcb3a1f8165da6997@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After waking from D3, we set the iPN given by the firmware.
For some reason, CIPHER_SUITE_AES_CMAC was missed.
That caused copying garbage to the iPN - causing false replays.
(since 'seq' is on the stack, and the iPN from the firmware
was not copied into it, it contains garbage which later is
copied to the iPN key).
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.2be5b35be30f.I99db8700d01092d22a6d76f1fc1bd5916c9df784@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If during D3 there was both a GTK rekey and a
disconnection, when waking up, we must first
update the new keys and then disconnect.
The reason is that when disconnecting we first need
to remove the keys.
Trying to remove invalid keys results in firmware
assert.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.68cf3974b5d7.Iac9b71a1906ab973aba9baadc9e923b63c0b4945@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
With unlimited pseudo-D3, we can get stuck here in the read if
the firmware never wakes up. All of our testing infrastructure
however will anyway give up after at most a minute, so there's
no value in that.
Limit this to about a minute to avoid getting stuck with the
RTNL held forever, which basically makes the machine unusable
and then we can't even understand what caused the failure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.ca55b3a7fa8d.Id746846f187442ebc689416d2688f2bd9278c0e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
WARN() returns the value of the condition, so it's
nicer to combine the warning and the if.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.44f63334760e.If0a2cf347a8676a3830c5c3183a257fe11f31419@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When waking from D3 (and a GTK rekey happened during
D3), the key itself is saved in iwl_wowlan_status_data::gtk
array, but the PN is saved in iwl_wowlan_status_data::gtk_seq
array.
The indices (of the same key) might differ in both arrays.
Fix using the gtk array index in the gtk_seq array.
Rather, iterate and search for the correct key in the
gtk_seq array.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.bdd0511c007d.I3325288c64c010a4d008ac4429de1c2b14ef764c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The client needs to disconnect from AP in case of more than 19 missed
beacons only if no data is coming from that AP, otherwise it needs to
stay connected.
Signed-off-by: Daniel Amosi <amosi.daniel@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.080195242c18.Ib166fc4e46666165a88e673a4a196cb8f18fdec4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Before sending SESSION PROTECTION cmd the driver verifies that the
link for which the cmd is going to be sent is active.
The existing code is checking it only for MLD vifs,
but also the deflink (in non-MLD vifs) needs to be active in order
the have a session protection for it.
Fix this by checking if the link is active also for non-MLD vifs
Fixes: 135065837310 ("wifi: iwlwifi: support link_id in SESSION_PROTECTION cmd")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240205211151.c61820f14ca6.Ibbe0f848f3e71f64313d21642650b6e4bfbe4b39@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The BIOS tables SGOM and UATS are read from UEFI, but require
additional tables (WGDS and DSM func 3, respectively) which used to be
read from ACPI only, so the code handling those tables had to be under
ifdef ACPI. But now the driver reads those tables (WGDS and DSM) from
both ACPI and UEFI, so SGOM and UATS code shouldn't be under ifdef ACPI
anymore.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.dcaa3325773f.I649079c842369dcae3a362842322deca422a61d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
CT kill should stop doing a lot of TX etc. to cool down the
NIC, but we don't stop all commands from going to the NIC,
and as such we shouldn't abort queue sync, since it can get
confused if we do, warning that we do it twice at the same
time etc. Only stop it when we'd also not send it in the
first place.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.4e0745e2cd97.I311dc623ce68de6a2da3c21c8d84a387844f714a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
define the timeout on RX queues notification as a macro so it will be
clearer.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.a6985ea87751.Iafb7ae13aa58d66512e4b3fa6c75149c75cbc305@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
It's a bit tricky to understand what's going on here, add
more data to the warning messages to make that clearer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240205211151.1df82a509636.I2f71811569a5c48eb166c4caa779af2d6160ad33@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
