| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator. This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.
As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.
We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.
Fixes: 9736a325137b ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgSH5ubdvt76gNwa004ooZAEJL_1Q-Fyw5M2FDdqL==dg@mail.gmail.com
Link: https://lore.kernel.org/r/20221112084718.3305-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods. This would, however, result in the bogus page
addresses when IOMMU is enabled. Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.
The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback. This avoids the corner case like the above.
The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.
Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com
Link: https://lore.kernel.org/r/20221110132216.30605-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a snd_ctl_rename() function that takes care of updating the control
hash entries for callers that already have the relevant struct snd_kcontrol
at hand and hold the control write lock (or simply haven't registered the
card yet).
Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Link: https://lore.kernel.org/r/4170b71117ea81357a4f7eb8410f7cde20836c70.1666296963.git.maciej.szmigiero@oracle.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We took sound_oss_mutex around the calls of unregister_sound_special()
at unregistering OSS devices. This may, however, lead to a deadlock,
because we manage the card release via the card's device object, and
the release may happen at unregister_sound_special() call -- which
will take sound_oss_mutex again in turn.
Although the deadlock might be fixed by relaxing the rawmidi mutex in
the previous commit, it's safer to move unregister_sound_special()
calls themselves out of the sound_oss_mutex, too. The call is
race-safe as the function has a spinlock protection by itself.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The register_mutex taken around the dev_unregister callback call in
snd_rawmidi_free() may potentially lead to a mutex deadlock, when OSS
emulation and a hot unplug are involved.
Since the mutex doesn't protect the actual race (as the registration
itself is already protected by another means), let's drop it.
Link: https://lore.kernel.org/r/CAB7eexJP7w1B0mVgDF0dQ+gWor7UdkiwPczmL7pn91xx8xpzOA@mail.gmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221011070147.7611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Setting pointer and afterwards checking for wraparound leads
to the possibility of returning the inconsistent pointer position.
This patch increments buffer pointer atomically to avoid this issue.
Fixes: e7f73a1613567a ("ASoC: Add dmaengine PCM helper functions")
Signed-off-by: Andreas Pape <apape@de.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/1664211493-11789-1-git-send-email-erosca@de.adit-jv.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The mmap status record should be read-only. Modifying it from
user-space may screw up things unexpectedly, so let's clear the write
bits at exposing it.
Note that alsa-lib and other known user-space apps access the mmapped
status only as read-only, hence this change shouldn't break the
existing applications.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In the PCM core and driver code, there are lots place referring to the
current PCM state via runtime->status->state. This patch introduced a
local PCM state in runtime itself and replaces those references with
runtime->state. It has improvements in two aspects:
- The reduction of a indirect access leads to more code optimization
- It avoids a possible (unexpected) modification of the state via mmap
of the status record
The status->state is updated together with runtime->state, so that
user-space can still read the current state via mmap like before,
too.
This patch touches only the ALSA core code. The changes in each
driver will follow in later patches.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220926135558.26580-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Use __GFP_RETRY_MAYFAIL instead of __GFP__NORETRY in
snd_dma_dev_alloc(), snd_dma_wc_alloc() and friends, to allocate pages
for device memory. The MAYFAIL flag retains the semantics of not
triggering the OOM killer, but lowers the risk of alloc failure.
MAYFAIL flag was added in commit dcda9b04713c3 ("mm, tree wide: replace
__GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic").
This change addresses recurring failures with SOF audio driver in test
cases where a system suspend-resume stress test is run, combined with an
active high memory-load use-case. The failure typically shows up as:
[ 379.480229] sof-audio-pci-intel-tgl 0000:00:1f.3: booting DSP firmware
[ 379.484803] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12
[ 379.484810] sof-audio-pci-intel-tgl 0000:00:1f.3: error: dma prepare for ICCMAX stream failed
Multiple fixes to reduce the memory usage of DSP boot have been
identified in SOF driver, but even with those fixes, debug on affected
systems has shown that even a single page alloc may fail with
__GFP_NORETRY. When this occurs, system is under significant load on
physical memory, but a lot of reclaimable pages are available, so the
system has not run out of memory. With __GFP_RETRY_MAYFAIL, the errors
are not hit in these stress tests.
The alloc failure is severe as audio capability is completely lost if
alloc failure is hit at system resume.
An alternative solution was considered where the resources for DSP boot
would be kept allocated until driver is unbound. This would avoid the
allocation failure, but consume memory that is only needed temporarily
at probe and resume time. It seems better to not hang on to the memory,
but rather work a bit harder for allocating the pages at resume.
BugLink: https://github.com/thesofproject/linux/issues/3844
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220923153501.3326041-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
snd_dma_sg_ops has been removed since
commit 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling
(take#3)"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220909035443.1065737-3-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|\|
| |
| |
| |
| |
| |
| | |
Once again back-merge the 6.0-rc devel branch for further USB-audio
and HD-audio developments.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The last fix for trying to recover the regression on AMD platforms,
unfortunately, leaded to yet another regression: it turned out that
IOMMUs don't like the usage of raw page allocations.
This is yet another attempt for addressing the log saga; at this time,
we re-use the existing buffer allocation mechanism with SG-pages
although we require only single pages. The SG buffer allocation
itself was confirmed to work for stream buffers, so it's relatively
easy to adapt for other places.
The only problem is: although the HD-audio code is accessing the
address directly via dmab->address field, SG-pages don't set up it.
For the ease of adaption, we now set up the dmab->addr field from the
address of the first page as default, so that it can run with the
HD-audio driver code as-is without the excessive call of
snd_sgbuf_get_addr() multiple times; that's the only change in the
memalloc helper side. The rest is nothing but a flip of the dma_type
field in the HD-audio side.
Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CABXGCsO+kB2t5QyHY-rUe76npr1m0-5JOtt8g8SiHUo34ur7Ww@mail.gmail.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216112
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220906090319.23358-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant.
Reported-and-tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XN7JDM4xSXGhtusQfS2mSBcx50VJKwQpCq=WeLt57aaZA@mail.gmail.com
Link: https://lore.kernel.org/r/20220905060714.22549-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|\| |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
These two checks are in the reverse order so it might read one element
beyond the end of the array. First check if the "i" is within bounds
before using it.
Fixes: 6ab55ec0a938 ("ALSA: control: Fix an out-of-bounds bug in get_ctl_id_hash()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YwjgNh/gkG1hH7po@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since the user can control the arguments provided to the kernel by the
ioctl() system call, an out-of-bounds bug occurs when the 'id->name'
provided by the user does not end with '\0'.
The following log can reveal it:
[ 10.002313] BUG: KASAN: stack-out-of-bounds in snd_ctl_find_id+0x36c/0x3a0
[ 10.002895] Read of size 1 at addr ffff888109f5fe28 by task snd/439
[ 10.004934] Call Trace:
[ 10.007140] snd_ctl_find_id+0x36c/0x3a0
[ 10.007489] snd_ctl_ioctl+0x6cf/0x10e0
Fix this by checking the bound of 'id->name' in the loop.
Fixes: c27e1efb61c5 ("ALSA: control: Use xarray for faster lookups")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220824081654.3767739-1-zheyuma97@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that all users of snd_dma_continuous_data() is gone, let's drop
this ugly (and dangerous) way.
After this commit, SNDRV_DMA_TYPE_CONTINUOUS may take the standard
device pointer instead of the hacked pointer by the macro above, and
the memalloc core refers to the coherent_dma_mask of the given
device like other SNDRV_DMA_TYPE. It's still allowed to pass NULL
there, and in that case, the allocation is performed always in the
normal zone.
For SNDRV_DMA_TYPE_VMALLOC, the device pointer is simply ignored.
Link: https://lore.kernel.org/r/20220823115740.14123-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.
This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ALSA OSS sequencer refers to a global variable max_midi_devs at
creating a new port, storing it to its own field. Meanwhile this
variable may be changed by other sequencer events at
snd_seq_oss_midi_check_exit_port() in parallel, which may cause a data
race.
OTOH, this data race itself is almost harmless, as the access to the
MIDI device is done via get_mdev() and it's protected with a refcount,
hence its presence is guaranteed.
Though, it's sill better to address the data-race from the code sanity
POV, and this patch adds the proper spinlock for the protection.
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB2493pZRXs863w58QWnUTtv3HHfg85aYhLn5HJHCwxqtHQg@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We dropped the x86-specific hack for WC-page allocations with a hope
that the standard dma_alloc_wc() works nowadays. Alas, it doesn't,
and we need to take back some workaround again, but in a different
form, as the previous one was broken for some platforms.
This patch re-introduces the x86-specific WC-page allocations, but it
uses rather the manual page allocations instead of
dma_alloc_coherent(). The use of dma_alloc_coherent() was also a
potential problem in the recent addition of the fallback allocation
for noncontig pages, and this patch eliminates both at once.
Fixes: 9882d63bea14 ("ALSA: memalloc: Drop x86-specific hack for WC allocations")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216363
Link: https://lore.kernel.org/r/20220821155911.10715-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only significant core change is ASoC DPCM fix for asymmetric
setup; other remaining changes are device-specific fixes, including
the hardening of string manipulations.
One change in platform/x86 is the patch I forgot to apply from a
series for CS35L41 codec"
* tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Add quirk for Clevo NS50PU, NS70PU
ALSA: info: Fix llseek return value when using callback
ALSA: hda/cs8409: Support new Dolphin Variants
platform/x86: serial-multi-instantiate: Add CLSA0101 Laptop
ALSA: hda/realtek: Add quirk for Lenovo Yoga7 14IAL7
ALSA: hda: cs35l41: Clarify support for CSC3551 without _DSD Properties
ALSA: hda/realtek: Add quirks for ASUS Zenbooks using CS35L41
ASoC: codec: tlv320aic32x4: fix mono playback via I2S
ASoC: rt5640: Fix the JD voltage dropping issue
ASoC: tas2770: Fix handling of mute/unmute
ASoC: tas2770: Drop conflicting set_bias_level power setting
ASoC: tas2770: Allow mono streams
ASoC: tas2770: Set correct FSYNC polarity
ASoC: Intel: fix sof_es8336 probe
ASoC: DPCM: Don't pick up BE without substream
ASoC: SOF: ipc3-topology: Fix clang -Wformat warning
ASoC: sh: rz-ssi: Improve error handling in rz_ssi_probe() error path
ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()
ASoC: SOF: debug: Fix potential buffer overflow by snprintf()
ASoC: Intel: avs: Fix potential buffer overflow by snprintf()
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
When using callback there was a flow of
ret = -EINVAL
if (callback) {
offset = callback();
goto out;
}
...
offset = some other value in case of no callback;
ret = offset;
out:
return ret;
which causes the snd_info_entry_llseek() to return -EINVAL when there is
callback handler. Fix this by setting "ret" directly to callback return
value before jumping to "out".
Fixes: 73029e0ff18d ("ALSA: info - Implement common llseek for binary mode")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220817124924.3974577-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|\|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"As the diffstat shows, we've had lots of developments in a wide range
at this time; the majority of changes are about ASoC, including
subsystem-wide cleanups, continued SOF / Intel updates and a bunch of
new drivers (as usual), while there have been some significant (but
almost invisible) improvements in ALSA core side, too.
Below are some highlights:
Core:
- Faster lookups of control elements with Xarray; normal user won't
notice, but on the devices with tons of control elements, it can be
visibly faster
- Support for input validation for controls; this will harden for
badly written drivers in general with a slight overhead
- Deferred async signal handling for working around the potential
deadlocks
- Cleanup / refactoring raw MIDI locking code
ASoC:
- Restructing of the set_fmt() callbacks for making things clearer in
situations like CODEC to CODEC links
- Clean up and modernizing the DAI naming scheme setups
- Merge of more of the Intel AVS driver stack, including some board
integrations
- New version 4 mechanism for communication with SOF DSPs
- Suppoort for dynamically selecting the PLL to use at runtime on
i.MX platforms
- Improvements for CODEC to CODEC support in the generic cards
- Support for AMD Jadeite and various machines, AMD RPL, Intel
MetorLake DSPs, Mediatek MT8186 DSPs and MT6366, nVidia Tegra
MDDRC, OPE and PEQ, NXP TFA9890, Qualcomm SDM845, WCD9335 and
WAS883x, and Texas Instruments TAS2780
HD- and USB-audio:
- Continued improvement for CS35L41 (sub)codec support
- More quirks for various devices (HP, Lenovo, Dell, Clevo)"
* tag 'sound-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (778 commits)
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-eb0xxx
ALSA: line6: Replace sprintf() with sysfs_emit()
ALSA: hda: Replace sprintf() with sysfs_emit()
ALSA: pcm: Replace sprintf() with sysfs_emit()
ALSA: core: Replace scnprintf() with sysfs_emit()
ALSA: control-led: Replace sprintf() with sysfs_emit()
ALSA: aoa: Replace sprintf() with sysfs_emit()
ALSA: ac97: Replace sprintf() with sysfs_emit()
ALSA: hda/realtek: Add quirk for Clevo NV45PZ
ALSA: hda/realtek: Add quirk for Lenovo Yoga9 14IAP7
ALSA: control: Use deferred fasync helper
ALSA: pcm: Use deferred fasync helper
ALSA: timer: Use deferred fasync helper
ALSA: core: Add async signal helpers
ASoC: q6asm: use kcalloc() instead of kzalloc()
ACPI: scan: Add CLSA0101 Laptop Support
ALSA: hda: cs35l41: Support CLSA0101
ALSA: hda: cs35l41: Use the CS35L41 HDA internal define
ASoC: dt-bindings: use spi-peripheral-props.yaml
ASoC: codecs: va-macro: use fsgen as clock
...
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces such a
sprintf() call straightforwardly with the new helper.
Link: https://lore.kernel.org/r/20220801165639.26030-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| | |
sysfs_emit() is a new helper to simplify the sysfs string output.
Replace the open-code with this new helper.
Link: https://lore.kernel.org/r/20220801165639.26030-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For sysfs outputs, it's safer to use a new helper, sysfs_emit(),
instead of the raw sprintf() & co. This patch replaces such sprintf()
calls with sysfs_emit() while simplifying the open code in
list_show().
Link: https://lore.kernel.org/r/20220801165639.26030-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from the control API. Note
that it's merely a workaround.
Another note: although we haven't received reports about the deadlock
with the control API, the deadlock is still potentially possible, and
it's better to align the behavior with other core APIs (PCM and
timer); so let's move altogether.
Link: https://lore.kernel.org/r/20220728125945.29533-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from timer API. Note that
it's merely a workaround.
Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Reported-by: syzbot+669c9abf11a6a011dd09@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from PCI API. Note that
it's merely a workaround.
Reported-by: syzbot+1ee0910eca9c94f71f25@syzkaller.appspotmail.com
Reported-by: syzbot+49b10793b867871ee26f@syzkaller.appspotmail.com
Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.
As a temporary workaround, this patch provides the way to defer the
async signal notification in a work. The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively. In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.
Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for the
remaining ALSA core API functions.
Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for
memory allocation helpers.
Link: https://lore.kernel.org/r/20220713104759.4365-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value in
proper format. This patch adds or fixes the missing entries for
control API.
Link: https://lore.kernel.org/r/20220713104759.4365-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value and
the summary for each struct / enum in a proper format. This patch
adds or fixes the missing entries for compress-offload API.
Link: https://lore.kernel.org/r/20220713104759.4365-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
dmaengine API.
Link: https://lore.kernel.org/r/20220713104759.4365-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
API.
Link: https://lore.kernel.org/r/20220713104759.4365-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The exported functions snd_compress_new() and snd_compr_stop_error()
had already kernel-doc-style comments but they were not processed as
they weren't marked properly. Let's enable them.
This patch also fixes the missing argument id for snd_compress_new
comments, too.
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/3cd6b93b36b32ad6ae160931aaa00b20688e241a.1656759989.git.mchehab@kernel.org
Link: https://lore.kernel.org/r/20220713104759.4365-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| |\
| | |
| | |
| | |
| | |
| | |
| | | |
Back-merge of 5.19-rc branch for the futher development, mainly about
USB-audio and HD-audio Cirrus stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | |\
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Although snd_rawmidi_drain_output() may take some long time, it has no
protection and intrusive operations like the buffer resize may happen
meanwhile. For making the operation a bit more robust, this patch
takes the buffer refcount for blocking the buffer resize.
Also, as this function is exported, in theory, it might be called
asynchronously from the stream open/close state. For avoiding the
missing refcount, now the close call checks the buffer refcount, too.
Link: https://lore.kernel.org/r/20220617144051.18985-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The rawmidi interface provides some exported functions to be called
from outside, and currently there is no state check for those calls
whether the stream is properly opened and running. Although such an
invalid call shouldn't happen, but who knows.
This patch adds the proper rawmidi stream state checks with spinlocks
for avoiding unexpected accesses when such exported functions are
called in an invalid state. After this patch, with the
substream->opened and substream->runtime are always tied and
guaranteed to be set under substream->lock.
Link: https://lore.kernel.org/r/20220617144051.18985-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The input/output parameter changes are pretty intrusive, possibly
involving with the buffer resizing operation. Hence those should be
performed exclusively; otherwise some ugly race could happen.
This patch puts the existing open_mutex for snd_rawmidi_input_params()
and *_output_params() for protecting the concurrent calls. Since
those are exported, it's also meant for hardening from the external
calls, too.
Link: https://lore.kernel.org/r/20220617144051.18985-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Having a lock in snd_rawmidi_runtime can be a problem especially when
a substream is accessed from the outside, as the runtime creation
might be racy with the external calls. As a first step for hardening,
move the spinlock from snd_rawmidi_runtime to snd_rawmidi_substream.
This patch just replaces the lock calls, no real functional change is
put yet.
Link: https://lore.kernel.org/r/20220617144051.18985-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
__snd_rawmidi_transmit_peek() and __snd_rawmidi_transmit_ack() are
never called from the outside. Let's make them local static and
unexport them.
Link: https://lore.kernel.org/r/20220617144051.18985-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This patch adds a new feature to enable the validation of input data
to control elements in the ALSA core side. When
CONFIG_SND_CTL_INPUT_VALIDATION is set, ALSA core verifies whether the
each input value via control API is in the defined ranges, also checks
whether it's aligned to the defined steps. If an invalid value is
detected, ALSA core returns -EINVAL error immediately without passing
further to the driver's callback. So this is a kind of hardening for
(badly written) drivers that have no proper error checks, at the cost
of a slight performance overhead.
Technically seen, this reuses a part of the existing validation code
for CONFIG_SND_CTL_DEBUG case with a slight modification to suppress
error prints for the input validation.
Link: https://lore.kernel.org/r/20220609120219.3937-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Compilers should be smart enough to optimize out the dead functions,
so we don't need to define ugly dummy functions with ifdef.
Link: https://lore.kernel.org/r/20220609120219.3937-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The purpose of CONFIG_SND_CTL_VALIDATION is rather to enable the
debugging feature for the control API. The validation is only a part
of it. Let's rename it to be more explicit and intuitive.
While we're at it, let's advertise, give more comment to recommend
this feature for development in the kconfig help text.
Link: https://lore.kernel.org/r/20220609120219.3937-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
| | |/
| |/|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
The control elements are managed in a single linked list and we
traverse the whole list for matching each numid or ctl id per every
inquiry of a control element. This is OK-ish for a small number of
elements but obviously it doesn't scale. Especially the matching with
the ctl id takes time because it checks each field of the snd_ctl_id
element, e.g. the name string is matched with strcmp().
This patch adds the hash tables with Xarray for improving the lookup
speed of a control element. There are two xarray tables added to the
card; one for numid and another for ctl id. For the numid, we use the
numid as the index, while for the ctl id, we calculate a hash key.
The lookup is done via a single xa_load() execution. As long as the
given control element is found on the Xarray table, that's fine, we
can give back a quick lookup result. The problem is when no entry
hits on the table, and for this case, we have a slight optimization.
Namely, the driver checks whether we had a collision on Xarray table,
and do a fallback search (linear lookup of the full entries) only if a
hash key collision happened beforehand.
So, in theory, the inquiry for a non-existing element might take still
time even with this patch in a worst case, but this must be pretty
rare.
The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned
on as default. For simplicity, the option can be turned off only when
CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs").
Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de
Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/
Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|